Merge branch 'randconfig-fixes' into next/fixes-non-critical

This is the first batch of a much longer series of bug fixes
found during randconfig testing. This part are all the simple
patches that are applicable for the arm-soc tree, while most
other fixes will likely go through other maintainers.

* randconfig-fixes: (50 commits)
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ARM: s3c24xx: osiris dvs needs tps65010
  ARM: s3c24xx: fix gta02 build error
  ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24
  ARM: integrator: only select pl01x if TTY is enabled
  ARM: realview: fix sparsemem build
  ARM: footbridge: make screen_info setup conditional
  ARM: footbridge: fix build with PCI disabled
  ARM: footbridge: don't build floppy code for addin mode
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

53 files changed, 159 insertions, 91 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e25419817791..3dad96105ce4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -420,6 +420,7 @@ config ARCH_EFM32
 	bool "Energy Micro efm32"
 	depends on !MMU
 	select ARCH_REQUIRE_GPIOLIB
+	select AUTO_ZRELADDR
 	select ARM_NVIC
 	# CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
 	# i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
@@ -697,6 +698,7 @@ config ARCH_RPC
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_SA110
 	select FIQ
 	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
@@ -731,6 +733,7 @@ config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
@@ -753,6 +756,7 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select COMMON_CLK
@@ -764,7 +768,7 @@ config ARCH_S3C64XX
 	select HAVE_TCM
 	select NO_IOPORT
 	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
@@ -776,6 +780,7 @@ config ARCH_S3C64XX
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
@@ -794,6 +799,7 @@ config ARCH_S5P64X0
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
@@ -813,6 +819,7 @@ config ARCH_S5PV210
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
+	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ab2f7378352c..932b932c8856 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -198,3 +198,5 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b5d4a1..4157aec4e307 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,6 +74,7 @@ struct secondary_data {
 };
 extern struct secondary_data secondary_data;
 extern volatile int pen_release;
+extern void secondary_startup(void);
 
 extern int __cpu_disable(void);
 
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index f98763f0bc17..3bc80599c022 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -53,8 +53,7 @@
 
 #define checkuart(rp, rv, lhu, bit, uart) \
 		/* Load address of CLK_RST register */ \
-		movw	rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
 		/* Load value from CLK_RST register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's reset bit */ \
@@ -62,8 +61,7 @@
 		/* If set, can't use UART; jump to save no UART */ \
 		bne	90f ; \
 		/* Load address of CLK_OUT_ENB register */ \
-		movw	rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
 		/* Load value from CLK_OUT_ENB register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's clock enable bit */ \
@@ -71,8 +69,7 @@
 		/* If clear, can't use UART; jump to save no UART */ \
 		beq	90f ; \
 		/* Passed all tests, load address of UART registers */ \
-		movw	rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
-		movt	rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+		ldr	rp, =TEGRA_UART##uart##_BASE ; \
 		/* Jump to save UART address */ \
 		b 91f
 
@@ -90,15 +87,16 @@
 
 #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
 		/* Check ODMDATA */
-10:		movw	\rp, #TEGRA_PMC_SCRATCH20 & 0xffff
-		movt	\rp, #TEGRA_PMC_SCRATCH20 >> 16
+10:		ldr	\rp, =TEGRA_PMC_SCRATCH20
 		ldr	\rp, [\rp, #0]		@ Load PMC_SCRATCH20
-		ubfx	\rv, \rp, #18, #2	@ 19:18 are console type
+		lsr	\rv, \rp, #18		@ 19:18 are console type
+		and	\rv, \rv, #3
 		cmp	\rv, #2			@ 2 and 3 mean DCC, UART
 		beq	11f			@ some boards swap the meaning
 		cmp	\rv, #3			@ so accept either
 		bne	90f
-11:		ubfx	\rv, \rp, #15, #3	@ 17:15 are UART ID
+11:		lsr	\rv, \rp, #15		@ 17:15 are UART ID
+		and	\rv, #7	
 		cmp	\rv, #0			@ UART 0?
 		beq	20f
 		cmp	\rv, #1			@ UART 1?
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f0e800e7e71..9968f208b7df 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -57,6 +57,7 @@ config SOC_SAMA5
 	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
+	select USE_OF
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -64,11 +65,22 @@ choice
 
 	prompt "Core type"
 
+config ARCH_AT91X40
+	bool "ARM7 AT91X40"
+	depends on !MMU
+	select CPU_ARM7TDMI
+	select ARCH_USES_GETTIMEOFFSET
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
+	help
+	  Select this if you are using one of Atmel's AT91X40 SoC.
+
 config SOC_SAM_V4_V5
-	bool "ARM7/ARM9"
+	bool "ARM9 AT91SAM9/AT91RM9200"
 	help
-	  Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
-	  or AT91X40 SoC.
+	  Select this if you are using one of Atmel's AT91SAM9 or
+	  AT91RM9200 SoC.
 
 config SOC_SAM_V7
 	bool "Cortex A5"
@@ -179,9 +191,12 @@ config SOC_AT91SAM9N12
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
 # ----------------------------------------------------------
+endif # SOC_SAM_V4_V5
+
 
+if SOC_SAM_V4_V5 || ARCH_AT91X40
 source arch/arm/mach-at91/Kconfig.non_dt
-endif # SOC_SAM_V4_V5
+endif
 
 comment "Generic Board Type"
 
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 1f73e9b527da..44ace320d2e1 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -5,6 +5,7 @@ config HAVE_AT91_DATAFLASH_CARD
 
 choice
 	prompt "Atmel AT91 Processor Devices for non DT boards"
+	depends on !ARCH_AT91X40
 
 config ARCH_AT91_NONE
 	bool "None"
@@ -39,13 +40,6 @@ config ARCH_AT91SAM9G45
 	select SOC_AT91SAM9G45
 	select AT91_USE_OLD_CLK
 
-config ARCH_AT91X40
-	bool "AT91x40"
-	depends on !MMU
-	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-
 endchoice
 
 config ARCH_AT91SAM9G20
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index eda8d1679d40..8a4c6656b608 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1255,12 +1255,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
 	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
 
-	if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+	if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE)
 		pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
 	else
 		pdev->name = "at91_cf";
 
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index b26156bf15db..826315af6d11 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -36,6 +36,7 @@ void sam9_smc_write_mode(int id, int cs,
 {
 	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
 
 static void sam9_smc_cs_configure(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -69,6 +70,7 @@ void sam9_smc_configure(int id, int cs,
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_configure);
 
 static void sam9_smc_cs_read_mode(void __iomem *base,
 					struct sam9_smc_config *config)
@@ -84,6 +86,7 @@ void sam9_smc_read_mode(int id, int cs,
 {
 	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
 }
+EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
 
 static void sam9_smc_cs_read(void __iomem *base,
 					struct sam9_smc_config *config)
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7ca97b7291e..f7a07a58ebb6 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -351,7 +351,7 @@ void __init at91_ioremap_matrix(u32 base_addr)
 		panic("Impossible to ioremap at91_matrix_base\n");
 }
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
 static struct of_device_id rstc_ids[] = {
 	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
 	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index a075b3e0c5c7..626d2b82d0f3 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -214,11 +214,6 @@ config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
 
 config MACH_TNETV107X
 	bool "TI TNETV107X Reference Platform"
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 987605b78556..3de4dc9a1698 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -799,11 +799,12 @@ static __init void davinci_evm_init(void)
 	/* irlml6401 switches over 1A, in under 8 msec */
 	davinci_setup_usb(1000, 8);
 
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+		/* Register the fixup for PHY on DaVinci */
+		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+						davinci_phy_fixup);
+	}
 }
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 157ba88433c9..fd021ba539fe 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -242,6 +242,7 @@ unsigned int ep93xx_chip_revision(void)
 	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
 	return v;
 }
+EXPORT_SYMBOL_GPL(ep93xx_chip_revision);
 
 /*************************************************************************
  * EP93xx GPIO
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index f18be40e5b21..8d0042c9d4d3 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -404,8 +404,10 @@ static int __init exynos4_l2x0_cache_init(void)
 	if (ret)
 		return ret;
 
-	l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-	clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+	if (IS_ENABLED(CONFIG_S5P_SLEEP)) {
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+	}
 	return 0;
 }
 early_initcall(exynos4_l2x0_cache_init);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index f57cb91f02aa..93d2decc112d 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -14,6 +14,7 @@
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/export.h>
+#include <linux/module.h>
 #include <linux/time.h>
 #include <linux/platform_device.h>
 
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index fba55fb9f47d..07152d00fc50 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -52,6 +52,7 @@ config ARCH_EBSA285_HOST
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA
+	select ARCH_MAY_HAVE_PC_FDC
 	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the EBSA285 card
@@ -94,6 +95,5 @@ config FOOTBRIDGE_ADDIN
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
-	select ARCH_MAY_HAVE_PC_FDC
 
 endif
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 0b64dd430d61..c3faa3bc84dd 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
-obj-y			:= common.o dc21285.o dma.o isa-irq.o
+obj-y			:= common.o dma.o isa-irq.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
+pci-y			+= dc21285.o
 pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 9669cc0b6318..da0415094856 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -78,9 +78,11 @@ __initcall(cats_hw_init);
 static void __init
 fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
 {
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 	screen_info.orig_video_lines  = 25;
 	screen_info.orig_video_points = 16;
 	screen_info.orig_y = 24;
+#endif
 }
 
 MACHINE_START(CATS, "Chalice-CATS")
diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile
index 6870058d0a48..2ae1b59267c2 100644
--- a/arch/arm/mach-hisi/Makefile
+++ b/arch/arm/mach-hisi/Makefile
@@ -3,5 +3,4 @@
 #
 
 obj-y	+= hisilicon.o
-obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+obj-$(CONFIG_SMP)		+= platsmp.o hotplug.o
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index b909854eee7f..abd441b0c604 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -178,6 +178,7 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 void hi3xxx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
@@ -198,3 +199,4 @@ int hi3xxx_cpu_kill(unsigned int cpu)
 	hi3xxx_set_cpu(cpu, false);
 	return 1;
 }
+#endif
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index abeff25532ab..271a255864d2 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,8 +6,8 @@ config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
 	select MIGHT_HAVE_PCI
-	select SERIAL_AMBA_PL010
-	select SERIAL_AMBA_PL010_CONSOLE
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator/AP and
@@ -18,8 +18,8 @@ config ARCH_INTEGRATOR_CP
 	select ARCH_CINTEGRATOR
 	select ARM_TIMER_SP804
 	select PLAT_VERSATILE_CLCD
-	select SERIAL_AMBA_PL011
-	select SERIAL_AMBA_PL011_CONSOLE
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
 	select SOC_BUS
 	help
 	  Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index df82a2b4a546..eef39c7ad0cf 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -100,7 +100,7 @@ void __init ixp4xx_map_io(void)
 #define IXP4XX_GPIO_CLK_0		14
 #define IXP4XX_GPIO_CLK_1		15
 
-static void gpio_line_config(u8 line, u32 direction)
+void gpio_line_config(u8 line, u32 direction)
 {
 	if (direction == IXP4XX_GPIO_IN)
 		*IXP4XX_GPIO_GPOER |= (1 << line);
@@ -108,12 +108,12 @@ static void gpio_line_config(u8 line, u32 direction)
 		*IXP4XX_GPIO_GPOER &= ~(1 << line);
 }
 
-static void gpio_line_get(u8 line, int *value)
+void gpio_line_get(u8 line, int *value)
 {
 	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
 }
 
-static void gpio_line_set(u8 line, int value)
+void gpio_line_set(u8 line, int value)
 {
 	if (value == IXP4XX_GPIO_HIGH)
 	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index e54ff491c105..5a635c657ea2 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -17,6 +17,13 @@
 #include <asm/mach/pci.h>
 #include <asm/system_info.h>
 
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+void gpio_line_config(u8 line, u32 direction);
+void gpio_line_get(u8 line, int *value);
+void gpio_line_set(u8 line, int value);
+
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
 #define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 5cf30d1b78d2..559c69a47731 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -48,9 +48,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
  * fallback to the default.
  */
 
+extern unsigned long pcibios_min_mem;
 static inline int is_pci_memory(u32 addr)
 {
-	return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
+	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
 }
 
 #define writeb(v, p)			__indirect_writeb(v, p)
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 75ef03dc9964..2d494b454376 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -17,9 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#ifdef CONFIG_LEDS_CLASS
 #include <linux/leds.h>
-#endif
 
 #include <asm/setup.h>
 #include <asm/memory.h>
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 002bc619bb68..f2658168eeff 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -44,7 +44,8 @@ static void __init og_register_pci(void)
 	if (machine_is_im4004())
 		ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW);
 
-	ks8695_init_pci(&og_pci);
+	if (IS_ENABLED(CONFIG_PCI))
+		ks8695_init_pci(&og_pci);
 }
 
 /*
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index d7aa54c25c59..de03620d7fa7 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -99,6 +99,7 @@ u32 lpc32xx_return_iram_size(void)
 
 	return iram_size;
 }
+EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
 
 /*
  * Computes PLL rate from PLL register and input clock
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index f8f6adfa07c6..fb9762464718 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/completion.h>
+#include <linux/module.h>
 #include <mach/dma.h>
 #include <mach/msm_iomap.h>
 
@@ -77,6 +78,7 @@ void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
 {
 	writel((graceful << 31), DMOV_FLUSH0(id));
 }
+EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 {
@@ -115,6 +117,7 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
 	}
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 }
+EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
 
 struct msm_dmov_exec_cmdptr_cmd {
 	struct msm_dmov_cmd dmov_cmd;
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index adc8971c7266..34e09474636d 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -78,8 +78,10 @@ void __init msm_map_common_io(void)
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
 #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
 		defined(CONFIG_DEBUG_MSM_UART3)
+#ifdef CONFIG_MMU
 	debug_ll_addr(&msm_io_desc[size - 1].pfn,
 		      &msm_io_desc[size - 1].virtual);
+#endif
 	msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
 #endif
 	iotable_init(msm_io_desc, size);
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index f6c9d1d85c14..5b793ebb0a24 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -21,6 +21,7 @@
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
 #include <linux/mbus.h>
+#include <linux/signal.h>
 #include <linux/slab.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fd90cafc2e36..65d2acb31498 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -318,6 +318,9 @@ static void __init h2_init_smc91x(void)
 
 static int tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+	
 	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
 				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index d68909b095f1..3a0262156e93 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -191,6 +191,9 @@ static struct platform_device osk5912_tps_leds = {
 
 static int osk_tps_setup(struct i2c_client *client, void *context)
 {
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+
 	/* Set GPIO 1 HIGH to disable VBUS power supply;
 	 * OHCI driver powers it up/down as needed.
 	 */
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 40a1ae319610..dbee729e3b6d 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,7 +71,11 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
-#ifdef CONFIG_OMAP_32K_TIMER
+#ifndef CONFIG_OMAP_32K_TIMER
+
+static unsigned short enable_dyn_sleep = 0;
+
+#else
 
 static unsigned short enable_dyn_sleep = 1;
 
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2cb2f06c20f5..14f2cae4109c 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -33,7 +33,6 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
-	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 70974732cbf0..56edeab17b68 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -642,6 +642,8 @@ static void __init dns323_init(void)
 		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
 
 		/* Register fixup for the PHY LEDs */
+		if (!IS_BUILTIN(CONFIG_PHYLIB))
+			break;
 		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
 					   MARVELL_PHY_ID_MASK,
 					   dns323c_phy_fixup);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 96100dbf5a2e..a280cc42636b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -53,12 +53,16 @@ config MACH_TAVOREVB
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select CPU_PXA930
 	select CPU_PXA935
 	select PXA3xx
+	select FB
+	select FB_PXA
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -69,8 +73,7 @@ config ARCH_PXA_IDP
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
 	select ARCOM_PCMCIA
-	select HAVE_PWM
-	select I2C_GPIO
+	select I2C_GPIO if I2C=y
 	select ISA
 	select PXA25x
 	select PXA_HAVE_ISA_IRQS
@@ -164,7 +167,6 @@ config MACH_XCEP
 	select MTD_CFI_INTELEXT
 	select MTD_PHYSMAP
 	select PXA25x
-	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 	  Tuned for usage in Libera instruments for particle accelerators.
@@ -181,6 +183,7 @@ config MACH_TRIZEPS4
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
+	select MACH_TRIZEPS4
 	select PXA27x
 	select TRIZEPS_PCMCIA
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 2f71b3fbd319..43596e0ed051 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -331,7 +331,6 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
 static void __init balloon3_udc_init(void)
 {
 	pxa_set_udc_info(&balloon3_udc_info);
-	platform_device_register(&balloon3_gpio_vbus);
 }
 #else
 static inline void balloon3_udc_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 8404b24240ea..638b0bb88426 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -20,6 +20,7 @@
 #include <asm/mach/arch.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <asm/io.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2022e092f0ca..db09170e3832 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -56,6 +56,8 @@
 #define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
 #define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
 
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+
 #define __phys_to_virt(phys)						\
 	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
 	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d876431d64c0..f2727f2cc661 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -537,7 +537,7 @@ config MACH_AT2440EVB
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
-	select EEPROM_AT24
+	select EEPROM_AT24 if I2C
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_BACKLIGHT
@@ -573,7 +573,7 @@ config MACH_OSIRIS
 config MACH_OSIRIS_DVS
 	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
 	depends on MACH_OSIRIS
-	select TPS65010
+	depends on TPS65010
 	help
 	  Say Y/M here if you want to have dynamic voltage scaling support
 	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index d9170e9f8ccd..ee7bb2905a99 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -196,7 +196,7 @@ static void gta02_charger_worker(struct work_struct *work)
 	 * If the PCF50633 ADC is disabled we fallback to a
 	 * 100mA limit for safety.
 	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
+	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
 #endif
 }
 
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 64f04e6f9c31..3136d86b0d6e 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -86,8 +86,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
+	select S3C_DEV_HSMMC1
 	help
 	  Machine support for the Samsung SMDK6400
 
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 1649c0d1c1b8..ddf65583a5d8 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -55,7 +55,13 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[5];
 
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#ifndef CONFIG_SERIAL_SAMSUNG_UARTS
+#define SERIAL_SAMSUNG_UARTS 0
+#else
+#define	SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS];
 
 static int s3c64xx_irq_pm_suspend(void)
 {
@@ -66,7 +72,7 @@ static int s3c64xx_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
@@ -87,7 +93,7 @@ static void s3c64xx_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+	for (i = 0; i < SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 42e14f2e7ca7..f07edc304efb 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -205,6 +205,7 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	samsung_pwm_set_platdata(&s5p64x0_pwm_variant);
 }
 
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
@@ -218,7 +219,9 @@ void __init s5p6440_map_io(void)
 
 	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_map_io(void)
 {
 	/* initialize any device information early */
@@ -232,13 +235,14 @@ void __init s5p6450_map_io(void)
 
 	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
 }
+#endif
 
 /*
  * s5p64x0_init_clocks
  *
  * register and setup the CPU clocks
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -248,7 +252,9 @@ void __init s5p6440_init_clocks(int xtal)
 	s5p6440_register_clocks();
 	s5p6440_setup_clocks();
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -258,13 +264,14 @@ void __init s5p6450_init_clocks(int xtal)
 	s5p6450_register_clocks();
 	s5p6450_setup_clocks();
 }
+#endif
 
 /*
  * s5p64x0_init_irq
  *
  * register the CPU interrupts
  */
-
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_irq(void)
 {
 	/* S5P6440 supports 2 VIC */
@@ -279,7 +286,9 @@ void __init s5p6440_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_irq(void)
 {
 	/* S5P6450 supports only 2 VIC */
@@ -294,6 +303,7 @@ void __init s5p6450_init_irq(void)
 
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
+#endif
 
 struct bus_type s5p64x0_subsys = {
 	.name		= "s5p64x0-core",
@@ -321,6 +331,7 @@ int __init s5p64x0_init(void)
 }
 
 /* uart registration process */
+#ifdef CONFIG_CPU_S5P6440
 void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	int uart;
@@ -332,11 +343,14 @@ void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
+#ifdef CONFIG_CPU_S5P6450
 void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
 }
+#endif
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
 
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
index f3a9b43cba4a..cbe7f3d731d0 100644
--- a/arch/arm/mach-s5p64x0/common.h
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -25,10 +25,10 @@ void s5p6450_register_clocks(void);
 void s5p6450_setup_clocks(void);
 
 void s5p64x0_restart(enum reboot_mode mode, const char *cmd);
+extern  int s5p64x0_init(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p64x0_init(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
@@ -38,12 +38,10 @@ extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #ifdef CONFIG_CPU_S5P6450
 
-extern  int s5p64x0_init(void);
 extern void s5p6450_map_io(void);
 extern void s5p6450_init_clocks(int xtal);
 
@@ -53,7 +51,6 @@ extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 #define s5p6450_init_clocks NULL
 #define s5p6450_init_uarts NULL
 #define s5p6450_map_io NULL
-#define s5p64x0_init NULL
 #endif
 
 #endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
index 3e6f2456ee9d..d5f0fd66b635 100644
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -34,7 +34,9 @@ static struct irq_grp_save {
 	u32	mask;
 } eint_grp_save[4];
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 static int s5p64x0_irq_pm_suspend(void)
 {
@@ -45,8 +47,10 @@ static int s5p64x0_irq_pm_suspend(void)
 
 	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
@@ -66,8 +70,10 @@ static void s5p64x0_irq_pm_resume(void)
 
 	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
 
+#ifdef CONFIG_SERIAL_SAMSUNG
 	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
 		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+#endif
 
 	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
 		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index caaedafbbf5f..8c3abe521757 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -189,6 +189,7 @@ config MACH_TORBRECK
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_SDHCI
+	select SAMSUNG_DEV_IDE
 	help
 	  Machine support for aESOP Torbreck
 
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d9397202d6ec..27b168f121a1 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-sunxi/headsmp.S b/arch/arm/mach-sunxi/headsmp.S
deleted file mode 100644
index a10d494fb37b..000000000000
--- a/arch/arm/mach-sunxi/headsmp.S
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-        .section ".text.head", "ax"
-
-ENTRY(sun6i_secondary_startup)
-	msr	cpsr_fsxc, #0xd3
-	b	secondary_startup
-ENDPROC(sun6i_secondary_startup)
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index 7b141d8342a1..0c7dbce033cc 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -82,7 +82,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	spin_lock(&cpu_lock);
 
 	/* Set CPU boot address */
-	writel(virt_to_phys(sun6i_secondary_startup),
+	writel(virt_to_phys(secondary_startup),
 	       cpucfg_membase + CPUCFG_PRIVATE0_REG);
 
 	/* Assert the CPU core in reset */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1f8fed94c2a4..9e832295ecaa 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -264,7 +264,7 @@ config CPU_ARM1026
 
 # SA110
 config CPU_SA110
-	bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
+	bool
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 58645a58d0d8..b57e922f1614 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -427,8 +427,7 @@ comment "Power management"
 
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	select DEBUG_LL
+	depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -445,7 +444,8 @@ config S3C_PM_DEBUG_LED_SMDK
 
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
+	depends on PM
+	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option
 	  will generate CRCs of all blocks of memory, and store them before
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index aa9511b6914a..a30df396ca34 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -97,7 +97,9 @@ void __init s3c24xx_init_clocks(int xtal)
 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
 
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
+#endif
 
 /* s3c24xx_init_uartdevs
  *
@@ -112,6 +114,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no)
 {
+#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
 	struct platform_device *platdev;
 	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
 	struct s3c24xx_uart_resources *resp;
@@ -134,6 +137,7 @@ void __init s3c24xx_init_uartdevs(char *name,
 	}
 
 	nr_uarts = no;
+#endif
 }
 
 void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 49444203328a..f2b405116166 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -219,7 +219,7 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 	return __raw_readl(dev->mmio_base + reg);
 }
 
-#ifdef CONFIG_ARCH_PXA
+#if IS_ENABLED(CONFIG_PXA_SSP)
 struct ssp_device *pxa_ssp_request(int port, const char *label);
 void pxa_ssp_free(struct ssp_device *);
 struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,