summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-10 22:39:39 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-10 22:39:39 +0200
commitd6e2955a6b82d2312b5ff885ce13c8ab54d59d96 (patch)
treef8bc72a2f60218f2d14883b6b54b9454499ed158
parentde699ad595fb45022d1b049ed91ffd06fdd16c13 (diff)
ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>
While at it: * IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD * Use enum for WAIT_* defines. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-rw-r--r--drivers/ide/ide-floppy.c13
-rw-r--r--drivers/ide/ide-tape.c13
-rw-r--r--include/linux/ide.h28
3 files changed, 29 insertions, 25 deletions
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 4d7e9ef82425..a63aba2c8265 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -61,10 +61,6 @@
#define debug_log(fmt, args...) do {} while (0)
#endif
-
-/* Some drives require a longer irq timeout. */
-#define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD)
-
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
@@ -226,7 +222,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
idefloppy_floppy_t *floppy = drive->driver_data;
return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers,
+ WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers,
idefloppy_retry_pc, NULL, ide_io_buffers);
}
@@ -244,10 +240,9 @@ static int idefloppy_transfer_pc(ide_drive_t *drive)
drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
/* Timeout for the packet command */
- return IDEFLOPPY_WAIT_CMD;
+ return WAIT_FLOPPY_CMD;
}
-
/*
* Called as an interrupt (or directly). When the device says it's ready for a
* packet, we schedule the packet transfer to occur about 2-3 ticks later in
@@ -272,7 +267,7 @@ static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
timeout = floppy->ticks;
expiry = &idefloppy_transfer_pc;
} else {
- timeout = IDEFLOPPY_WAIT_CMD;
+ timeout = WAIT_FLOPPY_CMD;
expiry = NULL;
}
@@ -322,7 +317,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- IDEFLOPPY_WAIT_CMD, NULL);
+ WAIT_FLOPPY_CMD, NULL);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 737dd7db6bb7..25190966ed39 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -81,13 +81,6 @@ enum {
#define IDETAPE_MAX_PC_RETRIES 3
/*
- * Some drives (for example, Seagate STT3401A Travan) require a very long
- * timeout, because they don't return an interrupt or clear their busy bit
- * until after the command completes (even retension commands).
- */
-#define IDETAPE_WAIT_CMD (900*HZ)
-
-/*
* The following parameter is used to select the point in the internal tape fifo
* in which we will start to refill the buffer. Decreasing the following
* parameter will improve the system's latency and interactive response, while
@@ -663,7 +656,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
+ return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
NULL, idetape_update_buffers, idetape_retry_pc,
ide_tape_handle_dsc, ide_tape_io_buffers);
}
@@ -709,7 +702,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
+ WAIT_TAPE_CMD, NULL);
}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
@@ -758,7 +751,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
return ide_issue_pc(drive, pc, idetape_transfer_pc,
- IDETAPE_WAIT_CMD, NULL);
+ WAIT_TAPE_CMD, NULL);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 55098eed3b21..a9eced25acce 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -133,12 +133,28 @@ struct ide_io_ports {
/*
* Timeouts for various operations:
*/
-#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
-#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
-#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
-#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
-#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
-#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
+enum {
+ /* spec allows up to 20ms */
+ WAIT_DRQ = HZ / 10, /* 100ms */
+ /* some laptops are very slow */
+ WAIT_READY = 5 * HZ, /* 5s */
+ /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
+ WAIT_PIDENTIFY = 10 * HZ, /* 10s */
+ /* worst case when spinning up */
+ WAIT_WORSTCASE = 30 * HZ, /* 30s */
+ /* maximum wait for an IRQ to happen */
+ WAIT_CMD = 10 * HZ, /* 10s */
+ /* Some drives require a longer IRQ timeout. */
+ WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
+ /*
+ * Some drives (for example, Seagate STT3401A Travan) require a very
+ * long timeout, because they don't return an interrupt or clear their
+ * BSY bit until after the command completes (even retension commands).
+ */
+ WAIT_TAPE_CMD = 900 * HZ, /* 900s */
+ /* minimum sleep time */
+ WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
+};
/*
* Op codes for special requests to be handled by ide_special_rq().