diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-23 18:45:38 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-23 18:45:38 -0800 |
| commit | 9b6d351a75dae25430383b29a3764ae7921f6c47 (patch) | |
| tree | 605b1ec9f90138553cb7efedf9dbb3df93bef3a8 | |
| parent | dfd10e7ae60c6c1b24b5d601744b4fd1ecab2f31 (diff) | |
| parent | 310c85476d5047f5ace4d1c527e1bbbc0c7ad672 (diff) | |
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC DT updates from Olof Johansson:
"DT and DT-conversion-related changes for various ARM platforms. Most
of these are to enable various devices on various boards, etc, and not
necessarily worth enumerating.
New boards and systems continue to come in as new devicetree files
that don't require corresponding C changes any more, which is
indicating that the system is starting to work fairly well.
A few things worth pointing out:
* ST Ericsson ux500 platforms have made the major push to move over
to fully support the platform with DT
* Renesas platforms continue their conversion over from legacy
platform devices to DT-based for hardware description"
* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
ARM: dts: sirf: add lost minigpsrtc device node
ARM: dts: sirf: add clock, frequence-voltage table for CPU0
ARM: dts: sirf: add lost bus_width, clock and status for sdhci
ARM: dts: sirf: add lost clocks for cphifbg
ARM: dts: socfpga: add pl330 clock
ARM: dts: socfpga: update L2 tag and data latency
arm: sun7i: cubietruck: Enable the i2c controllers
ARM: dts: add support for EXYNOS4412 based TINY4412 board
ARM: dts: Add initial support for Arndale Octa board
ARM: bcm2835: add USB controller to device tree
ARM: dts: MSM8974: Add MMIO architected timer node
ARM: dts: MSM8974: Add restart node
ARM: dts: sun7i: external clock outputs
ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
ARM: dts: sun7i: Add pin muxing options for clock outputs
ARM: dts: sun7i: Add rtp controller node
ARM: dts: sun5i: Add rtp controller node
ARM: dts: sun4i: Add rtp controller node
...
238 files changed, 12679 insertions, 4211 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 5fac246a9530..3509707f9320 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -14,6 +14,9 @@ Required nodes: - core-module: the root node to the Integrator platforms must have a core-module with regs and the compatible string "arm,core-module-integrator" +- external-bus-interface: the root node to the Integrator platforms + must have an external bus interface with regs and the + compatible-string "arm,external-bus-interface" Required properties for the core module: - regs: the location and size of the core module registers, one @@ -48,6 +51,11 @@ Required nodes: reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index ad031211b5b8..2742e9cfd6b1 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" + <chip> can be "at91rm9200" or "sama5d3" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 78530e621a1e..16f60b41c147 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -58,7 +58,8 @@ Example: }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91sam9260-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", + "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", - reg: Should contain registers location and length For at91sam9263 and at91sam9g45 you must specify 2 entries. diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 000000000000..11087edb0658 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 5039c0a12f55..0ab3251a6ec2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,7 +1,12 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - name : should be 'sysreg'; - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; - reg : offset and length of the register set. + +Example: + syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt new file mode 100644 index 000000000000..952e373178d2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -0,0 +1,28 @@ +* Renesas CPG DIV6 Clock + +The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse +Generator (CPG). They clock input is divided by a configurable factor from 1 +to 64. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,cpg-div6-clock" for generic DIV6 clocks + - reg: Base address and length of the memory resource used by the DIV6 clock + - clocks: Reference to the parent clock + - #clock-cells: Must be 0 + - clock-output-names: The name of the clock as a free-form string + + +Example +------- + + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt new file mode 100644 index 000000000000..a6a352c2771e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -0,0 +1,51 @@ +* Renesas CPG Module Stop (MSTP) Clocks + +The CPG can gate SoC device clocks. The gates are organized in groups of up to +32 gates. + +This device tree binding describes a single 32 gate clocks group per node. +Clocks are referenced by user nodes by the MSTP node phandle and the clock +index in the group, from 0 to 31. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + - reg: Base address and length of the I/O mapped registers used by the MSTP + clocks. The first register is the clock control register and is mandatory. + The second register is the clock status register and is optional when not + implemented in hardware. + - clocks: Reference to the parent clocks, one per output clock. The parents + must appear in the same order as the output clocks. + - #clock-cells: Must be 1 + - clock-output-names: The name of the clocks as free-form strings + - renesas,indices: Indices of the gate clocks into the group (0 to 31) + +The clocks, clock-output-names and renesas,indices properties contain one +entry per gate clock. The MSTP groups are sparsely populated. Unimplemented +gate clocks must not be declared. + + +Example +------- + + #include <dt-bindings/clock/r8a7790-clock.h> + + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>; + #clock-cells = <1>; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0"; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 + >; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt new file mode 100644 index 000000000000..7b41c2fe54db --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -0,0 +1,32 @@ +* Renesas R-Car Gen2 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs +and several fixed ratio dividers. + +Required Properties: + + - compatible: Must be one of + - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG + - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "main", + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z" + + +Example +------- + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0, "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", "z"; + }; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index a8c21c256baa..1f5729f10621 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -50,6 +50,9 @@ Each dmas request consists of 4 cells: 0x00000008: Use fixed channel: Use automatic channel selection when unset Use DMA request line number when set + 0x00000010: Set channel as high priority: + Normal priority when unset + High priority when set Example: diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index c67b975c8906..532b1d440abc 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index b5a86d20ee36..167d5dab9f64 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -31,38 +31,58 @@ Required properties: 7: .. i: Local Timer Interrupt n -Example 1: In this example, the system uses only the first global timer - interrupt generated by MCT and the remaining three global timer - interrupts are unused. Two local timer interrupts have been - specified. + For MCT block that uses a per-processor interrupt for local timers, such + as ones compatible with "samsung,exynos4412-mct", only one local timer + interrupt might be specified, meaning that all local timers use the same + per processor interrupt. + +Example 1: In this example, the IP contains two local timers, using separate + interrupts, so two local timer interrupts have been specified, + in addition to four global timer interrupts. mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, <0 42 0>, <0 48 0>; }; -Example 2: In this example, the MCT global and local timer interrupts are - connected to two separate interrupt controllers. Hence, an - interrupt-map is created to map the interrupts to the respective - interrupt controllers. +Example 2: In this example, the timer interrupts are connected to two separate + interrupt controllers. Hence, an interrupt-map is created to map + the interrupts to the respective interrupt controllers. mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; + +Example 3: In this example, the IP contains four local timers, but using + a per-processor interrupt to handle them. Either all the local + timer interrupts can be specified, with the same interrupt specifier + value or just the first one. + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + + /* Both ways are possible in this case. Either: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>; + /* or: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; + }; diff --git a/Documentation/devicetree/bindings/usb/keystone-phy.txt b/Documentation/devicetree/bindings/usb/keystone-phy.txt new file mode 100644 index 000000000000..f37b3a86341d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-phy.txt @@ -0,0 +1,20 @@ +TI Keystone USB PHY + +Required properties: + - compatible: should be "ti,keystone-usbphy". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the usb phy control register set. + +The main purpose of this PHY driver is to enable the USB PHY reference clock +gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just +an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 +phy node in the USB Glue layer driver node. + +usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt new file mode 100644 index 000000000000..60527d335b58 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -0,0 +1,42 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the USB subsystem on + the SOC. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91896a3f703a..faa38bcc7001 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb # sam9x5 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb +dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb @@ -41,6 +42,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb + dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ @@ -64,10 +67,12 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4412-odroidx.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ + exynos4412-tiny4412.dtb \ exynos4412-trats2.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5420-arndale-octa.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb @@ -91,11 +96,13 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-iomega_ix2_200.dtb \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ + kirkwood-laplug.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ + kirkwood-netgear_readynas_nv+_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -110,6 +117,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -120,6 +128,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ + armada-xp-netgear-rn2120.dtb \ armada-xp-matrix.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ @@ -261,6 +270,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-hackberry.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a13-olinuxino.dtb \ + sun5i-a13-olinuxino-micro.dtb \ sun6i-a31-colombus.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 3a1de9eb5111..3c4f6d983cbd 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -90,34 +90,19 @@ nand-on-flash-bbt; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x8000>; - }; - - barebox@8000 { + barebox@0 { label = "barebox"; - reg = <0x8000 0x40000>; - }; - - bareboxenv@48000 { - label = "bareboxenv"; - reg = <0x48000 0x8000>; - }; - - user_block@0x50000 { - label = "user_block"; - reg = <0x50000 0xb0000>; + reg = <0x0 0x58000>; }; - kernel@100000 { - label = "kernel"; - reg = <0x100000 0x1b0000>; + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; }; - root@2b0000 { - label = "root"; - reg = <0x2b0000 0x1D50000>; + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2471d9da767b..944e8785b308 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -74,13 +74,13 @@ green_pwr_led { label = "mirabox:green:pwr"; gpios = <&gpio1 31 1>; - linux,default-trigger = "heartbeat"; + default-state = "keep"; }; blue_stat_led { label = "mirabox:blue:stat"; gpios = <&gpio2 0 1>; - linux,default-trigger = "cpu0"; + default-state = "off"; }; green_stat_led { @@ -139,6 +139,27 @@ reg = <0x25>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + partition@400000 { + label = "Linux"; + reg = <0x400000 0x400000>; + }; + partition@800000 { + label = "Filesystem"; + reg = <0x800000 0x3f800000>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 8ac2ac1f69cc..651aeb5ef439 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -11,6 +11,8 @@ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" / { @@ -62,6 +64,7 @@ marvell,pins = "mpp57"; marvell,function = "gpio"; }; + sata1_led_pin: sata1-led-pin { marvell,pins = "mpp15"; marvell,function = "gpio"; @@ -77,6 +80,21 @@ marvell,function = "gpio"; }; + backup_button_pin: backup-button-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + poweroff: poweroff { marvell,pins = "mpp8"; marvell,function = "gpio"; @@ -84,7 +102,7 @@ }; mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; @@ -104,6 +122,11 @@ clock-frequency = <100000>; status = "okay"; + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + g762: g762@3e { compatible = "gmt,g762"; reg = <0x3e>; @@ -113,82 +136,116 @@ pwm_polarity = <0>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = < &power_led_pin - &sata1_led_pin - &sata2_led_pin - &backup_led_pin >; + pinctrl-0 = <&power_led_pin + &sata1_led_pin + &sata2_led_pin + &backup_led_pin>; pinctrl-names = "default"; - blue_power_led { + blue-power-led { label = "rn102:blue:pwr"; - gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ - linux,default-trigger = "heartbeat"; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; - green_sata1_led { + green-sata1-led { label = "rn102:green:sata1"; - gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green_sata2_led { + green-sata2-led { label = "rn102:green:sata2"; - gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green_backup_led { + green-backup-led { label = "rn102:green:backup"; - gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + pinctrl-0 = <&power_button_pin + &reset_button_pin + &backup_button_pin>; + pinctrl-names = "default"; - button@1 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; - button@2 { + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio0 6 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; - button@3 { + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 26 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; }; - gpio_poweroff { + gpio-poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&poweroff>; pinctrl-names = "default"; - gpios = <&gpio0 8 1>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index b0b32f5fbeb4..4e27587667bf 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -11,6 +11,8 @@ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" / { @@ -58,12 +60,12 @@ marvell,function = "gpio"; }; - backup_key_pin: backup-key-pin { + backup_button_pin: backup-button-pin { marvell,pins = "mpp52"; marvell,function = "gpio"; }; - power_key_pin: power-key-pin { + power_button_pin: power-button-pin { marvell,pins = "mpp62"; marvell,function = "gpio"; }; @@ -78,18 +80,18 @@ marvell,function = "gpio"; }; - reset_key_pin: reset-key-pin { + reset_button_pin: reset-button-pin { marvell,pins = "mpp65"; marvell,function = "gpio"; }; }; mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; - phy1: ethernet-phy@1 { + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ reg = <1>; }; }; @@ -115,6 +117,11 @@ clock-frequency = <100000>; status = "okay"; + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + g762: g762@3e { compatible = "gmt,g762"; reg = <0x3e>; @@ -123,71 +130,133 @@ fan_startv = <1>; pwm_polarity = <0>; }; + + pca9554: pca9554@23 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x23>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; }; }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&backup_led_pin &power_led_pin>; pinctrl-names = "default"; - blue_backup_led { + blue-backup-led { label = "rn104:blue:backup"; - gpios = <&gpio1 31 0>; /* GPIO 63 Active High */ + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - blue_power_led { + blue-power-led { label = "rn104:blue:pwr"; - gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */ + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "keep"; }; + + blue-sata1-led { + label = "rn104:blue:sata1"; + gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata2-led { + label = "rn104:blue:sata2"; + gpios = <&pca9554 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata3-led { + label = "rn104:blue:sata3"; + gpios = <&pca9554 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata4-led { + label = "rn104:blue:sata4"; + gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&backup_key_pin - &power_key_pin - &reset_key_pin>; + pinctrl-0 = <&backup_button_pin + &power_button_pin + &reset_button_pin>; pinctrl-names = "default"; - button@1 { + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 20 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; - button@2 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; - button@3 { + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio2 1 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; }; - gpio_poweroff { + gpio-poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&poweroff>; pinctrl-names = "default"; - gpios = <&gpio1 28 1>; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f81810a59629..abbb807459d2 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -104,6 +104,27 @@ gpios = <&gpio0 6 1>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 80ffacd128f8..74b5964430ac 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -103,22 +103,52 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <50>; }; - mpic: interrupt-controller@20000 { - compatible = "marvell,mpic"; - #interrupt-cells = <1>; - #size-cells = <1>; - interrupt-controller; - msi-controller; + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; }; - coherency-fabric@20200 { - compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21010 0x1c>; + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <31>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; }; serial@12000 { @@ -146,25 +176,41 @@ clock-output-names = "nand"; }; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + mpic: interrupt-controller@20000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + msi-controller; + }; + + coherency-fabric@20200 { + compatible = "marvell,coherency-fabric"; + reg = <0x20200 0xb0>, <0x21010 0x1c>; + }; + timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; }; - sata@a0000 { - compatible = "marvell,armada-370-sata"; - reg = <0xa0000 0x5000>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <45>; status = "disabled"; }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x72004 0x4>; + usb@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x500>; + interrupts = <46>; + status = "disabled"; }; eth0: ethernet@70000 { @@ -175,6 +221,13 @@ status = "disabled"; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x4>; + }; + eth1: ethernet@74000 { compatible = "marvell,armada-370-neta"; reg = <0x74000 0x4000>; @@ -183,32 +236,25 @@ status = "disabled"; }; - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <31>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; + sata@a0000 { + compatible = "marvell,armada-370-sata"; + reg = <0xa0000 0x5000>; + interrupts = <55>; + clocks = <&gateclk 15>, <&gateclk 30>; + clock-names = "0", "1"; status = "disabled"; }; - i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + nand@d0000 { + compatible = "marvell,armada370-nand"; + reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; + #size-cells = <1>; + interrupts = <113>; + clocks = <&coredivclk 0>; status = "disabled"; }; - rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <50>; - }; - mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; @@ -220,43 +266,6 @@ cap-mmc-highspeed; status = "disabled"; }; - - usb@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x500>; - interrupts = <45>; - status = "disabled"; - }; - - usb@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x500>; - interrupts = <46>; - status = "disabled"; - }; - - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - reg = <0x10600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,orion-spi"; - reg = <0x10680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 7a4b82e71aaf..0d8530c98cf5 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -91,11 +91,6 @@ }; internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x100>; - }; - L2: l2-cache { compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; @@ -103,8 +98,17 @@ wt-override; }; - interrupt-controller@20000 { - reg = <0x20a00 0x1d0>, <0x21870 0x58>; + i2c0: i2c@11000 { + reg = <0x11000 0x20>; + }; + + i2c1: i2c@11100 { + reg = <0x11100 0x20>; + }; + + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; }; pinctrl { @@ -163,9 +167,11 @@ interrupts = <91>; }; - timer@20300 { - compatible = "marvell,armada-370-timer"; - clocks = <&coreclk 2>; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-370-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; coreclk: mvebu-sar@18230 { @@ -174,11 +180,28 @@ #clock-cells = <1>; }; - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-370-gating-clock"; - reg = <0x18220 0x4>; + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; + }; + + timer@20300 { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; + }; + + usb@50000 { + clocks = <&coreclk 0>; + }; + + usb@51000 { clocks = <&coreclk 0>; - #clock-cells = <1>; }; xor@60800 { @@ -218,29 +241,6 @@ dmacap,memset; }; }; - - i2c0: i2c@11000 { - reg = <0x11000 0x20>; - }; - - i2c1: i2c@11100 { - reg = <0x11100 0x20>; - }; - - usb@50000 { - clocks = <&coreclk 0>; - }; - - usb@51000 { - clocks = <&coreclk 0>; - }; - - thermal@18300 { - compatible = "marvell,armada370-thermal"; - reg = <0x18300 0x4 - 0x18304 0x4>; - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 2298e4a910e2..274e2ad5f51c 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -175,6 +175,14 @@ spi-max-frequency = <108000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts new file mode 100644 index 000000000000..ff049ee862eb --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -0,0 +1,327 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 2120 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-xp-mv78230.dtsi" + +/ { + model = "NETGEAR ReadyNAS 2120"; + compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to first Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to second Marvell 88SE9170 SATA controller */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Connected to Fresco Logic FL1009 USB 3.0 controller */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + poweroff: poweroff { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + sata3_led_pin: sata3-led-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + sata4_led_pin: sata4-led-pin { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + sata1_power_pin: sata1-power-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + sata2_power_pin: sata2-power-pin { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + + sata3_power_pin: sata3-power-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + sata4_power_pin: sata4-power-pin { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + sata3_pres_pin: sata3-pres-pin { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + sata4_pres_pin: sata4-pres-pin { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + + err_led_pin: err-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + clocks = <&coreclk 0>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <400000>; + status = "okay"; + + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + + /* Controller for rear fan #1 of 3 (Protechnic + * MGT4012XB-O20, 8000RPM) near eSATA port */ + g762_fan1: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Controller for rear (center) fan #2 of 3 */ + g762_fan2: g762@48 { + compatible = "gmt,g762"; + reg = <0x48>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Controller for rear fan #3 of 3 */ + g762_fan3: g762@49 { + compatible = "gmt,g762"; + reg = <0x49>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Temperature sensor */ + g751: g751@4c { + compatible = "gmt,g751"; + reg = <0x4c>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; + }; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin + &sata3_led_pin &sata4_led_pin>; + pinctrl-names = "default"; + + red-sata1-led { + label = "rn2120:red:sata1"; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata2-led { + label = "rn2120:red:sata2"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata3-led { + label = "rn2120:red:sata3"; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata4-led { + label = "rn2120:red:sata4"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-err-led { + label = "rn2120:red:err"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&power_button_pin &reset_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 5695afcc04bf..99bcf76e6953 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -103,8 +103,7 @@ green_led { label = "green_led"; gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; + default-state = "keep"; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 281c6447e872..b8b84a22f0f3 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -42,13 +42,14 @@ wt-override; }; - interrupt-controller@20000 { - reg = <0x20a00 0x2d0>, <0x21070 0x58>; + i2c0: i2c@11000 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x430>, <0x20800 0x20>; + i2c1: i2c@11100 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; }; serial@12200 { @@ -68,10 +69,16 @@ status = "disabled"; }; - timer@20300 { - compatible = "marvell,armada-xp-timer"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x500>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-xp-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; coreclk: mvebu-sar@18230 { @@ -80,6 +87,13 @@ #clock-cells = <1>; }; + thermal@182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0x182b0 0x4 + 0x184d0 0x4>; + status = "okay"; + }; + cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; @@ -87,16 +101,19 @@ clocks = <&coreclk 1>; }; - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-xp-gating-clock"; - reg = <0x18220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x500>; + timer@20300 { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + + armada-370-xp-pmsu@22000 { + compatible = "marvell,armada-370-xp-pmsu"; + reg = <0x22100 0x400>, <0x20800 0x20>; }; eth2: ethernet@30000 { @@ -107,6 +124,22 @@ status = "disabled"; }; + usb@50000 { + clocks = <&gateclk 18>; + }; + + usb@51000 { + clocks = <&gateclk 19>; + }; + + usb@52000 { + compatible = "marvell,orion-ehci"; + reg = <0x52000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; + xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 @@ -146,39 +179,6 @@ dmacap,memset; }; }; - - i2c0: i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - - usb@50000 { - clocks = <&gateclk 18>; - }; - - usb@51000 { - clocks = <&gateclk 19>; - }; - - usb@52000 { - compatible = "marvell,orion-ehci"; - reg = <0x52000 0x500>; - interrupts = <47>; - clocks = <&gateclk 20>; - status = "disabled"; - }; - - thermal@182b0 { - compatible = "marvell,armadaxp-thermal"; - reg = <0x182b0 0x4 - 0x184d0 0x4>; - status = "okay"; - }; }; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi new file mode 100644 index 000000000000..2093c4d7cd6a --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -0,0 +1,122 @@ +/* + * at91-cosino.dtsi - Device Tree file for Cosino core module + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9x5ek.dtsi by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g35.dtsi" + +/ { + model = "HCE Cosino core module"; + compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts new file mode 100644 index 000000000000..f9415dd11f17 --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -0,0 +1,84 @@ +/* + * at91-cosino_mega2560.dts - Device Tree file for Cosino board with + * Mega 2560 extension + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9g35ek.dts by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +#include "at91-cosino.dtsi" + +/ { + model = "HCE Cosino Mega 2560"; + compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + + tsadcc: tsadcc@f804c000 { + status = "okay"; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + + usart1: serial@f8020000 { + status = "okay"; + }; + + usart2: serial@f8024000 { + status = "okay"; + }; + + usb2: gadget@f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + non-removable; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f77065506f1e..c61b16fba79b 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -191,12 +191,12 @@ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; - pinctrl_uart0_rts: uart0_rts-0 { + pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; - pinctrl_uart0_cts: uart0_cts-0 { + pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index d2d72c3b44c4..df6b0aa0e4dd 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -29,10 +29,22 @@ ahb { apb { - dbgu: serial@fffff200 { + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; + atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy { + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + usart1: serial@fffc4000 { pinctrl-0 = <&pinctrl_uart1 @@ -44,16 +56,6 @@ status = "okay"; }; - macb0: ethernet@fffbc000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; @@ -63,12 +65,45 @@ reg = <0>; }; }; + + dbgu: serial@fffff200 { + status = "okay"; + }; }; usb0: ohci@00300000 { num-ports = <2>; status = "okay"; }; + + nor_flash@10000000 { + compatible = "cfi-flash"; + reg = <0x10000000 0x800000>; + linux,mtd-name = "physmap-flash.0"; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x00000 0x40000>; + }; + + bareboxenv@40000 { + label = "bareboxenv"; + reg = <0x40000 0x10000>; + }; + + kernel@50000 { + label = "kernel"; + reg = <0x50000 0x300000>; + }; + + root@350000 { + label = "root"; + reg = <0x350000 0x4B0000>; + }; + }; }; leds { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d5bd65f74602..c8fa9b9f07e3 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -30,6 +30,7 @@ i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -366,6 +367,34 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */ + AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */ + AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */ + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */ + AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -547,6 +576,23 @@ pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + pwm0: pwm@fffb8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffb8000 0x300>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + fb0: fb@0x00700000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 70f835b55c0b..15009c9f2293 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -95,6 +95,36 @@ }; }; + fb0: fb@0x00700000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index c3e514837074..ef0857cb171c 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -37,6 +37,7 @@ i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -143,6 +144,22 @@ }; }; + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA21 periph A TWCK0 */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A TWCK1 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -425,6 +442,42 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE0 periph A */ + AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE2 periph A */ + AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE3 periph A */ + AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE4 periph A */ + AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE5 periph A */ + AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE6 periph A */ + AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE7 periph A */ + AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE8 periph A */ + AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE9 periph A */ + AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE10 periph A */ + AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE11 periph A */ + AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE12 periph A */ + AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE13 periph A */ + AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE14 periph A */ + AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE15 periph A */ + AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE16 periph A */ + AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE17 periph A */ + AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE18 periph A */ + AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE19 periph A */ + AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE20 periph A */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE22 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -542,6 +595,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -551,6 +606,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -614,10 +671,19 @@ }; }; + pwm0: pwm@fffb8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffb8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; + mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -629,6 +695,7 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; @@ -727,6 +794,15 @@ }; }; + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a4b00e5c61c0..7ff665a8c708 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -105,6 +105,14 @@ AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; + + pwm0 { + pinctrl_pwm_leds: pwm-led { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */ + AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */ + }; + }; }; spi0: spi@fffa4000{ @@ -121,6 +129,42 @@ atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; status = "okay"; }; + + pwm0: pwm@fffb8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_leds>; + }; + }; + + fb0: fb@0x00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; }; nand0: nand@40000000 { @@ -165,16 +209,22 @@ gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; + }; + + pwmleds { + compatible = "pwm-leds"; d6 { label = "d6"; - gpios = <&pioD 0 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 3 5000 0>; + max-brightness = <255>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 1 5000 0>; + max-brightness = <255>; linux,default-trigger = "mmc0"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 6224f9fe2f2b..7248270a3ea6 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -33,6 +33,7 @@ i2c0 = &i2c0; i2c1 = &i2c1; ssc0 = &ssc0; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -542,6 +543,14 @@ reg = <0xfffffe40 0x10>; status = "disabled"; }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40267a116c3c..6e5e9cfc3c49 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -35,6 +35,7 @@ i2c1 = &i2c1; i2c2 = &i2c2; ssc0 = &ssc0; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -762,6 +763,14 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 978bab4991df..f8674bcc4489 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -27,6 +27,15 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; + clocks = <&clks 12>; + operating-points = < + /* kHz uV */ + 200000 1025000 + 400000 1025000 + 600000 1050000 + 800000 1100000 + >; + clock-latency = <150000>; }; }; @@ -69,6 +78,7 @@ cphifbg@88030000 { compatible = "sirf,prima2-cphifbg"; reg = <0x88030000 0x1000>; + clocks = <&clks 42>; }; }; @@ -546,6 +556,12 @@ sirf,function = "usp1"; }; }; + usp1_uart_nostreamctrl_pins_a: usp1@1 { + usp1 { + sirf,pins = "usp1_uart_nostreamctrl_grp"; + sirf,function = "usp1_uart_nostreamctrl"; + }; + }; usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 { usb0_upli_drvbus { sirf,pins = "usb0_upli_drvbusgrp"; @@ -636,6 +652,7 @@ reg = <0x56100000 0x100000>; interrupts = <38>; status = "disabled"; + bus-width = <4>; clocks = <&clks 36>; }; @@ -645,6 +662,7 @@ reg = <0x56200000 0x100000>; interrupts = <23>; status = "disabled"; + bus-width = <4>; clocks = <&clks 37>; }; @@ -654,6 +672,7 @@ reg = <0x56300000 0x100000>; interrupts = <23>; status = "disabled"; + bus-width = <4>; clocks = <&clks 37>; }; @@ -663,6 +682,7 @@ reg = <0x56500000 0x100000>; interrupts = <39>; status = "disabled"; + bus-width = <4>; clocks = <&clks 38>; }; @@ -697,6 +717,12 @@ interrupts = <52 53 54>; }; + minigpsrtc@2000 { + compatible = "sirf,prima2-minigpsrtc"; + reg = <0x2000 0x1000>; + interrupts = <54>; + }; + pwrc@3000 { compatible = "sirf,prima2-pwrc"; reg = <0x3000 0x1000>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 6e9deb786a7d..2a3b1c1313a0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -23,10 +23,15 @@ &gpio { pinctrl-names = "default"; - pinctrl-0 = <&alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &alt3>; + + gpioout: gpioout { + brcm,pins = <6>; + brcm,function = <1>; /* GPIO out */ + }; alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>; + brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; brcm,function = <4>; /* alt0 */ }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index aa537ed13f0a..b021c96d3ba1 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -107,6 +107,12 @@ clocks = <&clk_mmc>; status = "disabled"; }; + + usb { + compatible = "brcm,bcm2835-usb"; + reg = <0x7e980000 0x10000>; + interrupts = <1 9>; + }; }; clocks { diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 588ce58a2959..1e11e5a5f723 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -101,6 +101,9 @@ pinctrl-names = "default"; pinctrl-0 = <&mii_pins>; }; + gpio: gpio@1e26000 { + status = "okay"; + }; }; nand_cs3@62000000 { status = "okay"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 8d17346f9702..b695548dbb4e 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -8,6 +8,7 @@ * option) any later version. */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { arm { @@ -256,6 +257,19 @@ 36 >; }; + gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH + 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH + 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH + 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH + 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 8349a248ecea..7a70f4ca502a 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -23,7 +23,7 @@ power { label = "Power"; gpios = <&gpio0 18 1>; - linux,default-trigger = "default-on"; + default-state = "keep"; }; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 113a8bc7bee7..8de1031233ae 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -107,51 +107,29 @@ 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ - mbusc: mbus-ctrl@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x800100 0x8>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; + spi0: spi-ctrl@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; + status = "disabled"; }; - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <0>; - marvell,#interrupts = <5>; - }; - - core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; - }; - - gate_clk: clock-gating-ctrl@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; + i2c0: i2c-ctrl@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - thermal: thermal-diode@d001c { - compatible = "marvell,dove-thermal"; - reg = <0xd001c 0x0c>, <0xd005c 0x08>; + status = "disabled"; }; uart0: serial@12000 { @@ -192,34 +170,224 @@ status = "disabled"; }; - gpio0: gpio-ctrl@d0400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0400 0x20>; - ngpios = <32>; + spi1: spi-ctrl@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + mbusc: mbus-ctrl@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x800100 0x8>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; interrupt-controller; - #interrupt-cells = <2>; - interrupts = <12>, <13>, <14>, <60>; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; }; - gpio1: gpio-ctrl@d0420 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0420 0x20>; - ngpios = <32>; + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; interrupt-controller; - #interrupt-cells = <2>; - interrupts = <61>; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; }; - gpio2: gpio-ctrl@e8400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe8400 0x0c>; - ngpios = <8>; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + crypto: crypto-engine@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xffffe000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + clocks = <&gate_clk 15>; + status = "okay"; + }; + + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + + xor0: dma-engine@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gate_clk 23>; + status = "okay"; + + channel0 { + interrupts = <39>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <40>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + xor1: dma-engine@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gate_clk 24>; + status = "okay"; + + channel0 { + interrupts = <42>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <43>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + sdio1: sdio-host@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + eth: ethernet-ctrl@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device_type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + sdio0: sdio-host@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sata0: sata-host@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + clocks = <&gate_clk 3>; + phys = <&sata_phy0>; + phy-names = "port0"; + nr-ports = <1>; + status = "disabled"; + }; + + sata_phy0: sata-phy@a2000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0xa2000 0x0334>; + clocks = <&gate_clk 3>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + audio0: audio-controller@b0000 { + compatible = "marvell,dove-audio"; + reg = <0xb0000 0x2210>; + interrupts = <19>, <20>; + clocks = <&gate_clk 12>; + clock-names = "internal"; + status = "disabled"; + }; + + audio1: audio-controller@b4000 { + compatible = "marvell,dove-audio"; + reg = <0xb4000 0x2210>; + interrupts = <21>, <22>; + clocks = <&gate_clk 13>; + clock-names = "internal"; + status = "disabled"; + }; + + thermal: thermal-diode@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + + gate_clk: clock-gating-ctrl@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + pmu_intc: pmu-interrupt-ctrl@d0050 { + compatible = "marvell,dove-pmu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd0050 0x8>; + interrupts = <33>; + marvell,#interrupts = <7>; }; pinctrl: pin-ctrl@d0200 { @@ -413,193 +581,47 @@ }; }; - spi0: spi-ctrl@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <6>; - reg = <0x10600 0x28>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_spi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - spi1: spi-ctrl@14600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <5>; - reg = <0x14600 0x28>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - i2c0: i2c-ctrl@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <11>; - clock-frequency = <400000>; - timeout-ms = <1000>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - ehci0: usb-host@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <24>; - clocks = <&gate_clk 0>; - status = "okay"; - }; - - ehci1: usb-host@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x1000>; - interrupts = <25>; - clocks = <&gate_clk 1>; - status = "okay"; - }; - - sdio0: sdio-host@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>, <37>; - clocks = <&gate_clk 8>; - pinctrl-0 = <&pmx_sdio0>; - pinctrl-names = "default"; - status = "disabled"; + core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clock"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; }; - sdio1: sdio-host@90000 { - compatible = "marvell,dove-sdhci"; - reg = <0x90000 0x100>; - interrupts = <36>, <38>; - clocks = <&gate_clk 9>; - pinctrl-0 = <&pmx_sdio1>; - pinctrl-names = "default"; - status = "disabled"; + gpio0: gpio-ctrl@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12>, <13>, <14>, <60>; }; - sata0: sata-host@a0000 { - compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; - interrupts = <62>; - clocks = <&gate_clk 3>; - nr-ports = <1>; - status = "disabled"; + gpio1: gpio-ctrl@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <61>; }; rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; + interrupt-parent = <&pmu_intc>; + interrupts = <5>; }; - crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xffffe000 0x800>; - reg-names = "regs", "sram"; - interrupts = <31>; - clocks = <&gate_clk 15>; - status = "okay"; - }; - - xor0: dma-engine@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60a00 0x100>; - clocks = <&gate_clk 23>; - status = "okay"; - - channel0 { - interrupts = <39>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <40>; - dmacap,memcpy; - dmacap,xor; - }; - }; - - xor1: dma-engine@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - clocks = <&gate_clk 24>; - status = "okay"; - - channel0 { - interrupts = <42>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <43>; - dmacap,memcpy; - dmacap,xor; - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <30>; - clocks = <&gate_clk 2>; - status = "disabled"; - - ethphy: ethernet-phy { - device-type = "ethernet-phy"; - /* set phy address in board file */ - }; - }; - - eth: ethernet-ctrl@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 2>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - ethernet-port@0 { - device_type = "network"; - compatible = "marvell,orion-eth-port"; - reg = <0>; - interrupts = <29>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-handle = <ðphy>; - }; - }; - - audio0: audio-controller@b0000 { - compatible = "marvell,dove-audio"; - reg = <0xb0000 0x2210>; - interrupts = <19>, <20>; - clocks = <&gate_clk 12>; - clock-names = "internal"; - status = "disabled"; - }; - - audio1: audio-controller@b4000 { - compatible = "marvell,dove-audio"; - reg = <0xb4000 0x2210>; - interrupts = <21>, <22>; - clocks = <&gate_clk 13>; - clock-names = "internal"; - status = "disabled"; + gpio2: gpio-ctrl@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpios = <8>; }; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 861aa7d6fc7d..50ccd151091e 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -9,7 +9,10 @@ */ /dts-v1/; -/include/ "emev2.dtsi" +#include "emev2.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "EMEV2 KZM9D Board"; @@ -47,11 +50,46 @@ reg = <0x20000000 0x10000>; phy-mode = "mii"; interrupt-parent = <&gpio0>; - interrupts = <1 1>; /* active high */ + interrupts = <1 IRQ_TYPE_EDGE_RISING>; reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; vddvario-supply = <®_1p8v>; vdd33a-supply = <®_3p3v>; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-1"; + linux,code = <KEY_1>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-2"; + linux,code = <KEY_2>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-3"; + linux,code = <KEY_3>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-4"; + linux,code = <KEY_4>; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 9063a4434d6a..e37985fa10e2 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -8,7 +8,8 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "renesas,emev2"; @@ -48,44 +49,129 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 120 4>, - <0 121 4>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>; + }; + + smu@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u1_sclkdiv: usib_u1_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u2_sclkdiv: usib_u2_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 16>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u3_sclkdiv: usib_u3_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x660 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; + usib_u1_sclk: usib_u1_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4b8 1>; + clocks = <&usib_u1_sclkdiv>; + #clock-cells = <0>; + }; + usib_u2_sclk: usib_u2_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4bc 1>; + clocks = <&usib_u2_sclkdiv>; + #clock-cells = <0>; + }; + usib_u3_sclk: usib_u3_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4c0 1>; + clocks = <&usib_u3_sclkdiv>; + #clock-cells = <0>; + }; + sti_sclk: sti_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x528 1>; + clocks = <&c32ki>; + #clock-cells = <0>; + }; }; sti@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; - interrupts = <0 125 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sti_sclk>; + clock-names = "sclk"; }; uart@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; - interrupts = <0 8 0>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; }; uart@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; - interrupts = <0 9 0>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u1_sclk>; + clock-names = "sclk"; }; uart@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; - interrupts = <0 10 0>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u2_sclk>; + clock-names = "sclk"; }; uart@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; - interrupts = <0 11 0>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u3_sclk>; + clock-names = "sclk"; }; gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; - interrupts = <0 67 0>, <0 68 0>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, + <0 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -95,7 +181,8 @@ gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; - interrupts = <0 69 0>, <0 70 0>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -105,7 +192,8 @@ gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; - interrupts = <0 71 0>, <0 72 0>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -115,7 +203,8 @@ gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; - interrupts = <0 73 0>, <0 74 0>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, + <0 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -125,7 +214,8 @@ gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; - interrupts = <0 75 0>, <0 76 0>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, + <0 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <31>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a73eeb5f258f..08452e183b57 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -85,21 +85,21 @@ reg = <0x10023CE0 0x20>; }; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; interrupt-controller; reg = <0x10440000 0x1000>; }; - sys_reg: sysreg { + sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 057d6829d319..48ecd7a755ab 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -36,11 +36,11 @@ reg = <0x10023CA0 0x20>; }; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x8000>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <16>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, @@ -51,24 +51,21 @@ mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock 3>, <&clock 344>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &gic 0 69 0>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 0 42 0>, - <0x5 0 &gic 0 48 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 6f34d7f6ba7e..94a43f9a05e2 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -22,7 +22,7 @@ / { compatible = "samsung,exynos4212"; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x8000>; }; @@ -34,26 +34,4 @@ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, <0 107 0>, <0 108 0>; }; - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts new file mode 100644 index 000000000000..0a9831256b33 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -0,0 +1,93 @@ +/* + * FriendlyARM's Exynos4412 based TINY4412 board device tree source + * + * Copyright (c) 2013 Alex Ling <kasimling@gmail.com> + * + * Device tree source file for FriendlyARM's TINY4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412.dtsi" + +/ { + model = "FriendlyARM TINY4412 board based on Exynos4412"; + compatible = "friendlyarm,tiny4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&gpm4 0 1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpm4 1 1>; + default-state = "off"; + }; + + led3 { + label = "led3"; + gpios = <&gpm4 2 1>; + default-state = "off"; + }; + + led4 { + label = "led4"; + gpios = <&gpm4 3 1>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + rtc@10070000 { + status = "okay"; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 85812bd95a86..87b339c739de 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -22,7 +22,7 @@ / { compatible = "samsung,exynos4412"; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; @@ -35,30 +35,4 @@ <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; }; - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>, <6 0>, <7 0>; - clocks = <&clock 3>, <&clock 344>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>, - <0x6 0 &gic 1 12 0>, - <0x7 0 &gic 1 12 0>; - }; - }; - }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 1917c829e64e..5c412aa14738 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -42,6 +42,26 @@ #clock-cells = <1>; }; + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>; + }; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 074739d39e2d..258dca441f36 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -23,7 +23,7 @@ reg = <0x10000000 0x100>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; interrupt-controller; @@ -39,7 +39,7 @@ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; - gic:interrupt-controller@10481000 { + gic: interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -50,27 +50,6 @@ interrupts = <1 9 0xf04>; }; - dwmmc_0: dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc_1: dwmmc1@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc_2: dwmmc2@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index bbfb23f942e1..b42e658876e5 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -34,6 +34,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; samsung,i2c-slave-addr = <0x66>; + status = "okay"; s5m8767_pmic@66 { compatible = "samsung,s5m8767-pmic"; @@ -266,7 +267,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <925000>; + regulator-min-microvolt = <912500>; regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; @@ -321,11 +322,9 @@ }; }; - i2c@12C70000 { - status = "disabled"; - }; - i2c@12C80000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; samsung,i2c-slave-addr = <0x50>; @@ -337,7 +336,10 @@ }; i2c@12C90000 { + status = "okay"; + wm1811a@1a { + compatible = "wlf,wm1811"; reg = <0x1a>; @@ -355,23 +357,9 @@ }; }; - i2c@12CA0000 { - status = "disabled"; - }; - - i2c@12CB0000 { - status = "disabled"; - }; - - i2c@12CC0000 { - status = "disabled"; - }; - - i2c@12CD0000 { - status = "disabled"; - }; - i2c@12CE0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; samsung,i2c-slave-addr = <0x38>; @@ -382,15 +370,11 @@ }; }; - i2c@121D0000 { - status = "disabled"; - }; - - dwmmc_0: dwmmc0@12200000 { + mmc_0: mmc@12200000 { + status = "okay"; num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -405,14 +389,10 @@ }; }; - dwmmc_1: dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc_2: dwmmc2@12220000 { + mmc_2: mmc@12220000 { + status = "okay"; num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -428,26 +408,10 @@ }; }; - dwmmc_3: dwmmc3@12230000 { - status = "disabled"; - }; - i2s0: i2s@03830000 { status = "okay"; }; - spi_0: spi@12d20000 { - status = "disabled"; - }; - - spi_1: spi@12d30000 { - status = "disabled"; - }; - - spi_2: spi@12d40000 { - status = "disabled"; - }; - gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 9b186ac06c8b..9a61494f45f5 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -37,6 +37,7 @@ }; i2c@12C60000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -185,6 +186,7 @@ }; i2c@12C70000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -198,6 +200,7 @@ }; i2c@12C80000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -208,30 +211,31 @@ }; i2c@12C90000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CA0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CB0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; - i2c@12CC0000 { - status = "disabled"; - }; - i2c@12CD0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CE0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -241,11 +245,10 @@ }; }; - dwmmc0@12200000 { + mmc@12200000 { num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -259,14 +262,9 @@ }; }; - dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc2@12220000 { + mmc@12220000 { num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -281,11 +279,10 @@ }; }; - dwmmc3@12230000 { + mmc@12230000 { num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -298,19 +295,12 @@ }; }; - spi_0: spi@12d20000 { - status = "disabled"; - }; - spi_1: spi@12d30000 { + status = "okay"; samsung,spi-src-clk = <0>; num-cs = <1>; }; - spi_2: spi@12d40000 { - status = "disabled"; - }; - hdmi { hpd-gpio = <&gpx3 7 0>; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index f86d56760a45..3e69837c435c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -30,6 +30,7 @@ i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; + status = "okay"; eeprom@50 { compatible = "samsung,s524ad0xd1"; @@ -37,7 +38,7 @@ }; }; - vdd:fixed-regulator@0 { + vdd: fixed-regulator@0 { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; regulator-min-microvolt = <1800000>; @@ -45,7 +46,7 @@ regulator-always-on; }; - dbvdd:fixed-regulator@1 { + dbvdd: fixed-regulator@1 { compatible = "regulator-fixed"; regulator-name = "dbvdd-supply"; regulator-min-microvolt = <3300000>; @@ -53,7 +54,7 @@ regulator-always-on; }; - spkvdd:fixed-regulator@2 { + spkvdd: fixed-regulator@2 { compatible = "regulator-fixed"; regulator-name = "spkvdd-supply"; regulator-min-microvolt = <5000000>; @@ -64,6 +65,7 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; + status = "okay"; eeprom@51 { compatible = "samsung,s524ad0xd1"; @@ -77,6 +79,9 @@ gpio-controller; #gpio-cells = <2>; + clocks = <&codec_mclk>; + clock-names = "MCLK1"; + AVDD2-supply = <&vdd>; CPVDD-supply = <&vdd>; DBVDD-supply = <&dbvdd>; @@ -89,6 +94,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; samsung,i2c-slave-addr = <0x38>; + status = "okay"; sata-phy { compatible = "samsung,sata-phy"; @@ -103,6 +109,7 @@ i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + status = "okay"; hdmiddc@50 { compatible = "samsung,exynos4210-hdmiddc"; @@ -110,29 +117,10 @@ }; }; - i2c@12C90000 { - status = "disabled"; - }; - - i2c@12CA0000 { - status = "disabled"; - }; - - i2c@12CB0000 { - status = "disabled"; - }; - - i2c@12CC0000 { - status = "disabled"; - }; - - i2c@12CD0000 { - status = "disabled"; - }; - i2c@12CE0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + status = "okay"; hdmiphy@38 { compatible = "samsung,exynos4212-hdmiphy"; @@ -140,11 +128,11 @@ }; }; - dwmmc0@12200000 { + mmc@12200000 { + status = "okay"; num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -158,14 +146,10 @@ }; }; - dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc2@12220000 { + mmc@12220000 { + status = "okay"; num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -180,15 +164,13 @@ }; }; - dwmmc3@12230000 { - status = "disabled"; - }; - spi_0: spi@12d20000 { status = "disabled"; }; spi_1: spi@12d30000 { + status = "okay"; + w25q80bw@0 { #address-cells = <1>; #size-cells = <1>; @@ -214,10 +196,6 @@ }; }; - spi_2: spi@12d40000 { - status = "disabled"; - }; - hdmi { hpd-gpio = <&gpx3 7 0>; }; @@ -279,5 +257,11 @@ compatible = "samsung,clock-xxti"; clock-frequency = <24000000>; }; + + codec_mclk: codec-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16934000>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index c65f52a6dcea..7e45eea2d78f 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "exynos5250.dtsi" -#include "cros5250-common.dtsi" +#include "exynos5250-cros-common.dtsi" / { model = "Google Snow"; @@ -172,11 +172,20 @@ }; }; + mmc@12200000 { + status = "okay"; + }; + + mmc@12220000 { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. */ - dwmmc3@12230000 { + mmc@12230000 { + status = "okay"; slot@0 { pinctrl-names = "default"; pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 6feaa1c454fa..587dd3e36f6c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -33,10 +33,10 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &dwmmc_0; - mshc1 = &dwmmc_1; - mshc2 = &dwmmc_2; - mshc3 = &dwmmc_3; + mshc0 = &mmc_0; + mshc1 = &mmc_1; + mshc2 = &mmc_2; + mshc3 = &mmc_3; i2c0 = &i2c_0; i2c1 = &i2c_1; i2c2 = &i2c_2; @@ -244,6 +244,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; + status = "disabled"; }; i2c_1: i2c@12C70000 { @@ -256,6 +257,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; + status = "disabled"; }; i2c_2: i2c@12C80000 { @@ -268,6 +270,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; + status = "disabled"; }; i2c_3: i2c@12C90000 { @@ -280,6 +283,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; + status = "disabled"; }; i2c_4: i2c@12CA0000 { @@ -292,6 +296,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c4_bus>; + status = "disabled"; }; i2c_5: i2c@12CB0000 { @@ -304,6 +309,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c5_bus>; + status = "disabled"; }; i2c_6: i2c@12CC0000 { @@ -316,6 +322,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c6_bus>; + status = "disabled"; }; i2c_7: i2c@12CD0000 { @@ -328,6 +335,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c7_bus>; + status = "disabled"; }; i2c_8: i2c@12CE0000 { @@ -338,6 +346,7 @@ #size-cells = <0>; clocks = <&clock 302>; clock-names = "i2c"; + status = "disabled"; }; i2c@121D0000 { @@ -347,10 +356,12 @@ #size-cells = <0>; clocks = <&clock 288>; clock-names = "i2c"; + status = "disabled"; }; spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; dmas = <&pdma0 5 @@ -366,6 +377,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d30000 0x100>; interrupts = <0 67 0>; dmas = <&pdma1 5 @@ -381,6 +393,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d40000 0x100>; interrupts = <0 68 0>; dmas = <&pdma0 7 @@ -394,25 +407,43 @@ pinctrl-0 = <&spi2_bus>; }; - dwmmc_0: dwmmc0@12200000 { + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12200000 0x1000>; clocks = <&clock 280>, <&clock 139>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_1: dwmmc1@12210000 { + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12210000 0x1000>; clocks = <&clock 281>, <&clock 140>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_2: dwmmc2@12220000 { + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12220000 0x1000>; clocks = <&clock 282>, <&clock 141>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_3: dwmmc3@12230000 { + mmc_3: mmc@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; interrupts = <0 78 0>; @@ -420,6 +451,8 @@ #size-cells = <0>; clocks = <&clock 283>, <&clock 142>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; i2s0: i2s@03830000 { @@ -528,6 +561,15 @@ }; }; + pwm: pwm@12dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12dd0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock 311>; + clock-names = "timers"; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts new file mode 100644 index 000000000000..7340745ff979 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -0,0 +1,66 @@ +/* + * Samsung's Exynos5420 based Arndale Octa board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; + compatible = "insignal,arndale-octa", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC3,115200"; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + mmc@12200000 { + status = "okay"; + broken-cd; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 79524c74c603..fb5a1e25c632 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -31,6 +31,39 @@ }; }; + mmc@12200000 { + status = "okay"; + broken-cd; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 09aa06cb3d3a..11dd202c54bb 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -22,6 +22,9 @@ compatible = "samsung,exynos5420"; aliases { + mshc0 = &mmc_0; + mshc1 = &mmc_1; + mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -31,6 +34,18 @@ i2c1 = &i2c_1; i2c2 = &i2c_2; i2c3 = &i2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + i2c8 = &hsi2c_8; + i2c9 = &hsi2c_9; + i2c10 = &hsi2c_10; + gsc0 = &gsc_0; + gsc1 = &gsc_1; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; }; cpus { @@ -64,6 +79,34 @@ reg = <0x3>; clock-frequency = <1800000000>; }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <1000000000>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + }; }; clock: clock-controller@10010000 { @@ -88,13 +131,50 @@ clock-names = "mfc"; }; + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock 352>, <&clock 133>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock 353>, <&clock 134>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; clocks = <&clock 1>, <&clock 315>; clock-names = "fin_pll", "mct"; @@ -109,7 +189,11 @@ <4 &gic 0 120 0>, <5 &gic 0 121 0>, <6 &gic 0 122 0>, - <7 &gic 0 123 0>; + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; }; }; @@ -190,6 +274,106 @@ status = "okay"; }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock 362>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock 363>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock 473>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock 442>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; + + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + clocks = <&clock 271>, <&clock 135>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + clocks = <&clock 272>, <&clock 136>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + clocks = <&clock 273>, <&clock 137>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + serial@12C00000 { clocks = <&clock 257>, <&clock 128>; clock-names = "uart", "clk_uart_baud0"; @@ -210,6 +394,15 @@ clock-names = "uart", "clk_uart_baud0"; }; + pwm: pwm@12dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12dd0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock 279>; + clock-names = "timers"; + }; + dp_phy: video-phy@10040728 { compatible = "samsung,exynos5250-dp-video-phy"; reg = <0x10040728 4>; @@ -292,6 +485,97 @@ status = "disabled"; }; + hsi2c_4: i2c@12CA0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CA0000 0x1000>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; + clocks = <&clock 265>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: i2c@12CB0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CB0000 0x1000>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; + clocks = <&clock 266>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: i2c@12CC0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CC0000 0x1000>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; + clocks = <&clock 267>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: i2c@12CD0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CD0000 0x1000>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; + clocks = <&clock 268>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: i2c@12E00000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E00000 0x1000>; + interrupts = <0 87 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_hs_bus>; + clocks = <&clock 281>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: i2c@12E10000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E10000 0x1000>; + interrupts = <0 88 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_hs_bus>; + clocks = <&clock 282>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: i2c@12E20000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E20000 0x1000>; + interrupts = <0 203 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c10_hs_bus>; + clocks = <&clock 283>; + clock-names = "hsi2c"; + status = "disabled"; + }; + hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; @@ -310,4 +594,62 @@ clocks = <&clock 431>, <&clock 143>; clock-names = "mixer", "sclk_hdmi"; }; + + gsc_0: video-scaler@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock 465>; + clock-names = "gscl"; + samsung,power-domain = <&gsc_pd>; + }; + + gsc_1: video-scaler@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock 466>; + clock-names = "gscl"; + samsung,power-domain = <&gsc_pd>; + }; + + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif"; + }; + + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <0 183 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif"; + }; + + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <0 184 0>; + clocks = <&clock 318>, <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; + interrupts = <0 185 0>; + clocks = <&clock 318>, <&clock 319>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + + tmu_gpu: tmu@100a0000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x100a0000 0x100>, <0x10068000 0x4>; + interrupts = <0 215 0>; + clocks = <&clock 319>, <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8da107088ce4..02a0a1226cef 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -29,7 +29,7 @@ #clock-cells = <1>; }; - gic:interrupt-controller@2E0000 { + gic: interrupt-controller@2E0000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 0f06f8687b0b..88e3d477bf16 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -10,6 +10,11 @@ reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + timer@13000000 { reg = <0x13000000 0x100>; interrupt-parent = <&pic>; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts new file mode 100644 index 000000000000..eaefdfef65c3 --- /dev/null +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -0,0 +1,63 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * + * Keystone 2 Kepler/Hawking EVM device tree + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "keystone.dtsi" + +/ { + compatible = "ti,keystone-evm"; + + soc { + clock { + refclksys: refclksys { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-sys"; + }; + + refclkpass: refclkpass { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-pass"; + }; + + refclkarm: refclkarm { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "refclk-arm"; + }; + + refclkddr3a: refclkddr3a { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + clock-output-names = "refclk-ddr3a"; + }; + + refclkddr3b: refclkddr3b { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + clock-output-names = "refclk-ddr3b"; + }; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index d6713b113258..2363593e1050 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -13,17 +13,10 @@ clocks { #size-cells = <1>; ranges; - refclkmain: refclkmain { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <122880000>; - clock-output-names = "refclk-main"; - }; - mainpllclk: mainpllclk@2310110 { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclksys>; reg = <0x02620350 4>, <0x02310110 4>; reg-names = "control", "multiplier"; fixed-postdiv = <2>; @@ -32,47 +25,43 @@ clocks { papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkpass>; clock-output-names = "pa-pll-clk"; reg = <0x02620358 4>; reg-names = "control"; - fixed-postdiv = <6>; }; - ddr3allclk: ddr3apllclk@2620360 { + ddr3apllclk: ddr3apllclk@2620360 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkddr3a>; clock-output-names = "ddr-3a-pll-clk"; reg = <0x02620360 4>; reg-names = "control"; - fixed-postdiv = <6>; }; - ddr3bllclk: ddr3bpllclk@2620368 { + ddr3bpllclk: ddr3bpllclk@2620368 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkddr3b>; clock-output-names = "ddr-3b-pll-clk"; reg = <0x02620368 4>; reg-names = "control"; - fixed-postdiv = <6>; }; armpllclk: armpllclk@2620370 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkarm>; clock-output-names = "arm-pll-clk"; reg = <0x02620370 4>; reg-names = "control"; - fixed-postdiv = <6>; }; mainmuxclk: mainmuxclk@2310108 { #clock-cells = <0>; compatible = "ti,keystone,pll-mux-clock"; - clocks = <&mainpllclk>, <&refclkmain>; + clocks = <&mainpllclk>, <&refclksys>; reg = <0x02310108 4>; bit-shift = <23>; bit-mask = <1>; @@ -135,6 +124,15 @@ clocks { clock-output-names = "chipclk13"; }; + paclk13: paclk13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&papllclk>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "paclk13"; + }; + chipclk14: chipclk14 { #clock-cells = <0>; compatible = "fixed-factor-clock"; diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dtsi index 100bdf52b847..b4202907a27b 100644 --- a/arch/arm/boot/dts/keystone.dts +++ b/arch/arm/boot/dts/keystone.dtsi @@ -6,14 +6,12 @@ * published by the Free Software Foundation. */ -/dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" / { model = "Texas Instruments Keystone 2 SoC"; - compatible = "ti,keystone-evm"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&gic>; @@ -64,7 +62,11 @@ #address-cells = <1>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, - <0x0 0x02562000 0x0 0x2000>; + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; }; timer { @@ -179,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; }; + + usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; + }; + + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi new file mode 100644 index 000000000000..3916937d6818 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -0,0 +1,107 @@ +/ { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6192-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 650ef30e1856..416d96e1302f 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -89,6 +89,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; @@ -97,6 +99,8 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 3933a331ddc2..2902e0d7971d 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -104,6 +104,12 @@ }; }; + thermal@10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; @@ -111,12 +117,25 @@ clocks = <&gate_clk 7>; }; + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + status = "disabled"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; @@ -125,29 +144,13 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; cap-mmc-highspeed; status = "disabled"; }; - - thermal@10078 { - compatible = "marvell,kirkwood-thermal"; - reg = <0x10078 0x4>; - status = "okay"; - }; - - i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 142b9cd3b454..bb4df405527c 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -66,8 +66,8 @@ button@1 { label = "Power push button"; - linux,code = <116>; - gpios = <&gpio0 16 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; @@ -76,17 +76,17 @@ red-fail { label = "cloudbox:red:fail"; - gpios = <&gpio0 14 0>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; blue-sata { label = "cloudbox:blue:sata"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio_poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio0 17 0>; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 053aa20fb30f..afebc1570318 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -51,8 +51,8 @@ mvsdio@90000 { pinctrl-0 = <&pmx_sdio_gpios>; pinctrl-names = "default"; - wp-gpios = <&gpio1 5 0>; - cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index e112ca62d978..bf7fe8ab88f4 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -24,24 +24,24 @@ blue-power { label = "dns320:blue:power"; - gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; blue-usb { label = "dns320:blue:usb"; - gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; orange-l_hdd { label = "dns320:orange:l_hdd"; - gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; orange-r_hdd { label = "dns320:orange:r_hdd"; - gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; orange-usb { label = "dns320:orange:usb"; - gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 5119fb8a8eb6..cb9978c652f2 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -24,24 +24,24 @@ white-power { label = "dns325:white:power"; - gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; white-usb { label = "dns325:white:usb"; - gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ }; red-l_hdd { label = "dns325:red:l_hdd"; - gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; red-r_hdd { label = "dns325:red:r_hdd"; - gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; red-usb { label = "dns325:red:usb"; - gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index aefa375a550d..12087566ac6d 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -15,18 +15,18 @@ button@1 { label = "Power button"; - linux,code = <116>; - gpios = <&gpio1 2 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; button@2 { label = "USB unmount button"; - linux,code = <161>; - gpios = <&gpio1 15 1>; + linux,code = <KEY_EJECTCD>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset button"; - linux,code = <0x198>; - gpios = <&gpio1 16 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; @@ -35,8 +35,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 1 - &gpio1 13 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW + &gpio1 13 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; @@ -46,7 +46,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 33ff368fbfa5..2a41c75c5c21 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -42,12 +42,12 @@ health { label = "status:green:health"; - gpios = <&gpio1 14 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; fault { label = "status:orange:fault"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; regulators { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 6f62af99c9cb..a7558375e06f 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -87,15 +87,15 @@ bluetooth { label = "dreamplug:blue:bluetooth"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; wifi { label = "dreamplug:green:wifi"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; wifi-ap { label = "dreamplug:green:wifi_ap"; - gpios = <&gpio1 17 1>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index a43bebb25110..c2e512953570 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -85,44 +85,44 @@ health { label = "status:green:health"; - gpios = <&gpio1 14 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; fault { label = "status:orange:fault"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; left0 { label = "status:white:left0"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; left1 { label = "status:white:left1"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; left2 { label = "status:white:left2"; - gpios = <&gpio1 12 0>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; left3 { label = "status:white:left3"; - gpios = <&gpio1 13 0>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; right0 { label = "status:white:right0"; - gpios = <&gpio1 6 0>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; right1 { label = "status:white:right1"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; right2 { label = "status:white:right2"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; right3 { label = "status:white:right3"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; }; regulators { @@ -141,7 +141,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index d30a91a5047d..0b557d5cb723 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -45,10 +45,10 @@ nr-ports = <1>; }; + /* AzureWave AW-GH381 WiFi/BT */ mvsdio@90000 { status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; + non-removable; }; }; @@ -60,19 +60,19 @@ health-r { label = "guruplug:red:health"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; health-g { label = "guruplug:green:health"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; wmode-r { label = "guruplug:red:wmode"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; wmode-g { label = "guruplug:green:wmode"; - gpios = <&gpio1 17 1>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index c5fb02f7ebc3..6ccc78866e6d 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -63,13 +63,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio0 29 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 28 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; }; @@ -81,16 +81,16 @@ green-os { label = "ib62x0:green:os"; - gpios = <&gpio0 25 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; red-os { label = "ib62x0:red:os"; - gpios = <&gpio0 22 0>; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; usb-copy { label = "ib62x0:red:usb_copy"; - gpios = <&gpio0 27 0>; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; }; @@ -98,7 +98,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; - gpios = <&gpio0 24 0>; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 4a62b206f680..f7636291de77 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -94,37 +94,37 @@ led-level { label = "led_level"; - gpios = <&gpio1 9 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; power-blue { label = "power:blue"; - gpios = <&gpio1 10 0>; - linux,default-trigger = "timer"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; power-red { label = "power:red"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; usb1 { label = "usb1:blue"; - gpios = <&gpio1 12 0>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; usb2 { label = "usb2:blue"; - gpios = <&gpio1 13 0>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; usb3 { label = "usb3:blue"; - gpios = <&gpio1 14 0>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; usb4 { label = "usb4:blue"; - gpios = <&gpio1 15 0>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; otb { label = "otb:blue"; - gpios = <&gpio1 16 0>; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; }; @@ -137,14 +137,14 @@ button@1 { label = "OTB Button"; - linux,code = <133>; - gpios = <&gpio1 3 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 12 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index d15395d671ed..589000631b5a 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -127,20 +127,20 @@ power_led { label = "status:white:power_led"; - gpios = <&gpio0 16 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; rebuild_led { label = "status:white:rebuild_led"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; health_led { label = "status:red:health_led"; - gpios = <&gpio1 5 0>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; backup_led { label = "status:blue:backup_led"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio-keys { @@ -154,18 +154,18 @@ Power { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio0 14 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; Reset { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio0 12 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; OTB { label = "OTB Button"; - linux,code = <133>; - gpios = <&gpio1 3 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index cd44f37e54b5..5b5808ebc6e0 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -38,8 +38,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = < &gpio0 8 0 /* sda */ - &gpio0 9 0 >; /* scl */ + gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ + &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts new file mode 100644 index 000000000000..c9e82eff9bf2 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" + +/ { + model = "LaCie LaPlug"; + compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + i2c@11000 { + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + + pinctrl: pinctrl@10000 { + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button@1{ + label = "Power push button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "laplug_v2:red:power"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + blue-power { + label = "laplug_v2:blue:power"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power_back1: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Back 1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + usb_power_back2: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "USB Power Back 2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + usb_power_front: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "USB Power Front"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + /* Total size : 512MB */ + status = "okay"; + pinctrl-0 = <&pmx_nand>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; /* 1MB */ + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x1000000>; /* 16MB */ + }; + + partition@1100000 { + label = "rootfs"; + reg = <0x1100000 0x1EF00000>; /* 495MB */ + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 4e8f9e42c592..fc1cd3b7b968 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -108,20 +108,20 @@ button@1 { label = "Function Button"; - linux,code = <357>; - gpios = <&gpio1 9 1>; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; - linux,code = <0>; + linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; - linux,code = <1>; + linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -134,28 +134,28 @@ led@1 { label = "lsxl:blue:func"; - gpios = <&gpio1 4 1>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lsxl:red:alarm"; - gpios = <&gpio1 5 1>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; led@3 { label = "lsxl:amber:info"; - gpios = <&gpio1 6 1>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; led@4 { label = "lsxl:blue:power"; - gpios = <&gpio1 7 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@5 { label = "lsxl:red:func"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; @@ -163,13 +163,13 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 19 1 - &gpio0 18 1>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW + &gpio0 18 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 8 0>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6c1ec2786e6e..c20607cd7d7c 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -110,7 +110,7 @@ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 15 1>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /* No WP GPIO */ }; }; @@ -126,36 +126,36 @@ health { label = "status:green:health"; - gpios = <&gpio0 7 1>; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; user1o { label = "user1:orange"; - gpios = <&gpio1 8 1>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "on"; }; user1g { label = "user1:green"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; user0o { label = "user0:orange"; - gpios = <&gpio1 12 1>; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; user0g { label = "user0:green"; - gpios = <&gpio1 13 1>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; misc { label = "status:orange:misc"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 6317e1d088b3..dc86429756d7 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -90,17 +90,17 @@ green-status { label = "gtw:green:Status"; - gpios = <&gpio0 20 0>; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; }; red-status { label = "gtw:red:Status"; - gpios = <&gpio0 21 0>; + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; green-usb { label = "gtw:green:USB"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; }; @@ -113,13 +113,13 @@ button@1 { label = "SWR Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio1 15 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; button@2 { label = "WPS Button"; - linux,code = <0x211>; /* KEY_WPS_BUTTON */ - gpios = <&gpio1 14 1>; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102cf424c..4d2a8db9ab77 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,3 +1,14 @@ +/* + * Device Tree file for NETGEAR ReadyNAS Duo v2 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + /dts-v1/; #include "kirkwood.dtsi" @@ -32,41 +43,50 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + pmx_button_backup: pmx-button-backup { marvell,pins = "mpp45"; marvell,function = "gpio"; }; + pmx_button_reset: pmx-button-reset { marvell,pins = "mpp13"; marvell,function = "gpio"; }; + pmx_led_blue_power: pmx-led-blue-power { marvell,pins = "mpp31"; marvell,function = "gpio"; }; + pmx_led_blue_activity: pmx-led-blue-activity { marvell,pins = "mpp38"; marvell,function = "gpio"; }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { marvell,pins = "mpp23"; marvell,function = "gpio"; }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { marvell,pins = "mpp22"; marvell,function = "gpio"; }; + pmx_led_blue_backup: pmx-led-blue-backup { marvell,pins = "mpp29"; marvell,function = "gpio"; }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; @@ -112,69 +132,80 @@ power_led { label = "status:blue:power_led"; - gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; + activity_led { label = "status:blue:activity_led"; - gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; + disk1_led { label = "status:blue:disk1_led"; - gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; + disk2_led { label = "status:blue:disk2_led"; - gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; + backup_led { label = "status:blue:backup_led"; - gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power &pmx_button_backup &pmx_button_reset>; pinctrl-names = "default"; - button@1 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 15 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@2 { + + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio0 13 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - button@3 { + + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 13 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB 3.0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 14 0>; - }; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_regulator: usb3-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; }; &nand { @@ -210,7 +241,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ device_type = "ethernet-phy"; reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts new file mode 100644 index 000000000000..7c8a0d9d8d1f --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -0,0 +1,268 @@ +/* + * Device Tree file for NETGEAR ReadyNAS NV+ v2 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS NV+ v2"; + compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + mbus { + pcie-controller { + status = "okay"; + + /* Connected to NEC uPD720200 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk3: pmx-led-blue-disk3 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk4: pmx-led-blue-disk4 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */ + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup + &pmx_led_blue_disk1 &pmx_led_blue_disk2 + &pmx_led_blue_disk3 &pmx_led_blue_disk3 >; + pinctrl-names = "default"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + }; + + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + + disk3_led { + label = "status:blue:disk3_led"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + disk4_led { + label = "status:blue:disk4_led"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_button_power &pmx_button_backup + &pmx_button_reset>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + backup-button { + label = "Backup Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_regulator: usb3-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2fcb82e20828..ae1ccbe41029 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -64,8 +64,8 @@ button@1 { label = "Power push button"; - linux,code = <116>; - gpios = <&gpio1 0 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; }; @@ -74,13 +74,13 @@ red-fail { label = "ns2:red:fail"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; }; gpio_poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio0 31 0>; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index 279607093cdb..1f2ca60d8b3d 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -25,8 +25,8 @@ blue-sata { label = "ns2:blue:sata"; - gpios = <&gpio0 30 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ide-disk"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index defdc77fb550..72c78d0b1116 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -22,10 +22,10 @@ gpio_fan { compatible = "gpio-fan"; - gpios = <&gpio0 22 1 - &gpio0 7 1 - &gpio1 1 1 - &gpio0 23 1>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW + &gpio1 1 GPIO_ACTIVE_LOW + &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = < 0 0 1500 15 @@ -36,7 +36,7 @@ 3300 10 4300 9 5500 8>; - alarm-gpios = <&gpio0 25 1>; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; ns2-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index adbafdd90991..c441bf62c09f 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -23,10 +23,10 @@ gpio_fan { compatible = "gpio-fan"; - gpios = <&gpio0 22 1 - &gpio0 7 1 - &gpio1 1 1 - &gpio0 23 1>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW + &gpio1 1 GPIO_ACTIVE_LOW + &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = < 0 0 3000 15 @@ -37,7 +37,7 @@ 7140 10 7980 9 9200 8>; - alarm-gpios = <&gpio0 25 1>; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; ns2-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index e3f915defd3d..aa78c2d11fe7 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -40,7 +40,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_pwr_off>; pinctrl-names = "default"; - gpios = <&gpio1 16 0>; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; regulators { @@ -58,7 +58,7 @@ regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 21 0>; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index b5418bcaecce..03fa24cf3344 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -119,18 +119,18 @@ button@1 { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio1 14 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; button@2 { label = "Copy Button"; - linux,code = <133>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio1 4 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; }; @@ -145,43 +145,43 @@ green-sys { label = "nsa310:green:sys"; - gpios = <&gpio0 28 0>; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; red-sys { label = "nsa310:red:sys"; - gpios = <&gpio0 29 0>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; green-hdd { label = "nsa310:green:hdd"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; red-hdd { label = "nsa310:red:hdd"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; green-esata { label = "nsa310:green:esata"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; red-esata { label = "nsa310:red:esata"; - gpios = <&gpio0 13 0>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; green-usb { label = "nsa310:green:usb"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; red-usb { label = "nsa310:red:usb"; - gpios = <&gpio0 16 0>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; green-copy { label = "nsa310:green:copy"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; red-copy { label = "nsa310:red:copy"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index ab0212b0e6f5..a5e779452867 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -107,18 +107,18 @@ button@1 { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio1 14 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; button@2 { label = "Copy Button"; - linux,code = <133>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio1 4 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; }; @@ -127,39 +127,39 @@ green-sys { label = "nsa310:green:sys"; - gpios = <&gpio0 28 0>; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; red-sys { label = "nsa310:red:sys"; - gpios = <&gpio0 29 0>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; green-hdd { label = "nsa310:green:hdd"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; red-hdd { label = "nsa310:red:hdd"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; green-esata { label = "nsa310:green:esata"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; red-esata { label = "nsa310:red:esata"; - gpios = <&gpio0 13 0>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; green-usb { label = "nsa310:green:usb"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; green-copy { label = "nsa310:green:copy"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; red-copy { label = "nsa310:red:copy"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index f0e3d213604c..5c6a4f1b4e93 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -101,17 +101,17 @@ led-red { label = "obsa6:red:stat"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; led-green { label = "obsa6:green:stat"; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; led-yellow { label = "obsa6:yellow:stat"; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -124,8 +124,8 @@ button@1 { label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 6 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 851fb2a60f20..c054ef61cff5 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -126,17 +126,17 @@ led-red { label = "obsa7:red:stat"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; led-green { label = "obsa7:green:stat"; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; led-yellow { label = "obsa7:yellow:stat"; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -149,8 +149,8 @@ button@1 { label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 6 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 1173d7fb31b2..7b1cd993e891 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -1,5 +1,5 @@ /* - * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> * diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index eac6a21f3b1f..e2b4ea4f9e10 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -24,8 +24,8 @@ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 12 1>; - wp-gpios = <&gpio1 15 0>; + cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; }; @@ -36,8 +36,8 @@ health { label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index bb61918313db..82f6abf120fd 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -1,5 +1,5 @@ /* - * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> * @@ -31,13 +31,13 @@ health { label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; misc { label = "sheevaplug:red:misc"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 320da677b984..40d6adf678ca 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -131,25 +131,25 @@ disk { label = "topkick:yellow:disk"; - gpios = <&gpio0 21 1>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "ide-disk"; }; system2 { label = "topkick:red:system"; - gpios = <&gpio1 5 1>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; system { label = "topkick:blue:system"; - gpios = <&gpio1 6 1>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; default-state = "on"; }; wifi { label = "topkick:green:wifi"; - gpios = <&gpio1 7 1>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; wifi2 { label = "topkick:yellow:wifi"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; regulators { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index f755bc1dc604..c17ae45e19be 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -41,13 +41,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio0 15 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 16 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 345562f75891..0713d072758a 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -51,13 +51,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio1 11 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 8b73c80f1dad..81e6c409284e 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,4 +1,6 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) @@ -68,39 +70,21 @@ #address-cells = <1>; #size-cells = <1>; - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x1500 0x20>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <1>; - marvell,#interrupts = <6>; - }; - core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; - #clock-cells = <1>; + #clock-cells = <1>; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + clocks = <&gate_clk 7>; + status = "disabled"; }; gpio0: gpio@10100 { @@ -127,6 +111,17 @@ clocks = <&gate_clk 7>; }; + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + status = "disabled"; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -145,15 +140,18 @@ status = "disabled"; }; - spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <23>; - reg = <0x10600 0x28>; - clocks = <&gate_clk 7>; - status = "disabled"; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; }; gate_clk: clock-gating-control@2011c { @@ -163,6 +161,21 @@ #clock-cells = <1>; }; + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; @@ -172,6 +185,14 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + clocks = <&gate_clk 3>; + status = "okay"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -212,37 +233,6 @@ }; }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - clocks = <&gate_clk 3>; - status = "okay"; - }; - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <29>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - status = "disabled"; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <46>; - clocks = <&gate_clk 0>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - eth0: ethernet-controller@72000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; @@ -263,6 +253,18 @@ }; }; + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + eth1: ethernet-controller@76000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; @@ -282,5 +284,23 @@ /* set phy-handle property in board file */ }; }; + + sata_phy0: sata-phy@82000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x82000 0x0334>; + clocks = <&gate_clk 14>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + sata_phy1: sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts new file mode 100644 index 000000000000..90749d55de0d --- /dev/null +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -0,0 +1,109 @@ +/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +/include/ "moxart.dtsi" + +/ { + model = "MOXA UC-7112-LX"; + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + flash@80000000,0 { + compatible = "numonyx,js28f128", "cfi-flash"; + reg = <0x80000000 0x1000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x40000>; + }; + partition@40000 { + label = "linux kernel"; + reg = <0x40000 0x1C0000>; + }; + partition@200000 { + label = "root filesystem"; + reg = <0x200000 0x800000>; + }; + partition@a00000 { + label = "user filesystem"; + reg = <0xa00000 0x600000>; + }; + }; + + leds { + compatible = "gpio-leds"; + user-led { + label = "ready-led"; + gpios = <&gpio 27 0x1>; + default-state = "on"; + linux,default-trigger = "default-on"; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <500>; + button@25 { + label = "GPIO Reset"; + linux,code = <116>; + gpios = <&gpio 25 1>; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait"; + }; +}; + +&clk_pll { + clocks = <&ref12>; +}; + +&sdhci { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac0 { + status = "okay"; +}; + +&mac1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi new file mode 100644 index 000000000000..da1d8effef97 --- /dev/null +++ b/arch/arm/boot/dts/moxart.dtsi @@ -0,0 +1,154 @@ +/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "moxa,moxart"; + model = "MOXART"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "faraday,fa526"; + reg = <0>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref12: ref12M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x90000000 0x10000000>; + ranges; + + intc: interrupt-controller@98800000 { + compatible = "moxa,moxart-ic"; + reg = <0x98800000 0x38>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-mask = <0x00080000>; + }; + + clk_pll: clk_pll@98100000 { + compatible = "moxa,moxart-pll-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + }; + + clk_apb: clk_apb@98100000 { + compatible = "moxa,moxart-apb-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + clocks = <&clk_pll>; + }; + + timer: timer@98400000 { + compatible = "moxa,moxart-timer"; + reg = <0x98400000 0x42>; + interrupts = <19 1>; + clocks = <&clk_apb>; + }; + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; + + rtc: rtc { + compatible = "moxa,moxart-rtc"; + gpio-rtc-sclk = <&gpio 5 0>; + gpio-rtc-data = <&gpio 6 0>; + gpio-rtc-reset = <&gpio 7 0>; + }; + + dma: dma@90500000 { + compatible = "moxa,moxart-dma"; + reg = <0x90500080 0x40>; + interrupts = <24 0>; + #dma-cells = <1>; + }; + + watchdog: watchdog@98500000 { + compatible = "moxa,moxart-watchdog"; + reg = <0x98500000 0x10>; + clocks = <&clk_apb>; + }; + + sdhci: sdhci@98e00000 { + compatible = "moxa,moxart-sdhci"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mdio0: mdio@90900090 { + compatible = "moxa,moxart-mdio"; + reg = <0x90900090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio1: mdio@92000090 { + compatible = "moxa,moxart-mdio"; + reg = <0x92000090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac0: mac@90900000 { + compatible = "moxa,moxart-mac"; + reg = <0x90900000 0x90>; + interrupts = <25 0>; + phy-handle = <ðphy0>; + phy-mode = "mii"; + status = "disabled"; + }; + + mac1: mac@92000000 { + compatible = "moxa,moxart-mac"; + reg = <0x92000000 0x90>; + interrupts = <27 0>; + phy-handle = <ðphy1>; + phy-mode = "mii"; + status = "disabled"; + }; + + uart0: uart@98200000 { + compatible = "ns16550a"; + reg = <0x98200000 0x20>; + interrupts = <31 8>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <14745600>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index aed83deaa991..fcc5bb63f03a 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -58,7 +58,7 @@ status = "okay"; ethphy: ethernet-phy { - device-type = "ethernet-phy"; + device_type = "ethernet-phy"; reg = <8>; }; }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index e06c37e91ac6..9f51538cd9ef 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -42,6 +42,25 @@ interrupts = <6>, <7>, <8>, <9>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -60,15 +79,6 @@ status = "disabled"; }; - spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; - status = "disabled"; - }; - wdt@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; @@ -82,30 +92,6 @@ status = "disabled"; }; - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; - - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; - }; - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; - status = "disabled"; - }; - xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 @@ -125,26 +111,6 @@ }; }; - crypto@90000 { - compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; - reg-names = "regs", "sram"; - interrupts = <28>; - status = "okay"; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - eth: ethernet-controller@72000 { compatible = "marvell,orion-eth"; #address-cells = <1>; @@ -162,5 +128,39 @@ /* set phy-handle property in board file */ }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <28>; + status = "okay"; + }; + + ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index daee58944e15..0e219932d7cc 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -29,6 +29,15 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; + clocks = <&clks 12>; + operating-points = < + /* kHz uV */ + 200000 1025000 + 400000 1025000 + 664000 1050000 + 800000 1100000 + >; + clock-latency = <150000>; }; }; @@ -80,6 +89,7 @@ cphifbg@88030000 { compatible = "sirf,prima2-cphifbg"; reg = <0x88030000 0x1000>; + clocks = <&clks 42>; }; }; @@ -540,6 +550,18 @@ "usp0_uart_nostreamctrl"; }; }; + usp0_only_utfs_pins_a: usp0@2 { + usp0 { + sirf,pins = "usp0_only_utfs_grp"; + sirf,function = "usp0_only_utfs"; + }; + }; + usp0_only_urfs_pins_a: usp0@3 { + usp0 { + sirf,pins = "usp0_only_urfs_grp"; + sirf,function = "usp0_only_urfs"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; @@ -648,6 +670,9 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56000000 0x100000>; interrupts = <38>; + status = "disabled"; + bus-width = <8>; + clocks = <&clks 36>; }; sd1: sdhci@56100000 { @@ -655,6 +680,9 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56100000 0x100000>; interrupts = <38>; + status = "disabled"; + bus-width = <4>; + clocks = <&clks 36>; }; sd2: sdhci@56200000 { @@ -662,6 +690,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56200000 0x100000>; interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; }; sd3: sdhci@56300000 { @@ -669,6 +699,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56300000 0x100000>; interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; }; sd4: sdhci@56400000 { @@ -676,6 +708,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56400000 0x100000>; interrupts = <39>; + status = "disabled"; + clocks = <&clks 38>; }; sd5: sdhci@56500000 { @@ -683,6 +717,7 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56500000 0x100000>; interrupts = <39>; + clocks = <&clks 38>; }; pci-copy@57900000 { @@ -716,6 +751,12 @@ interrupts = <52 53 54>; }; + minigpsrtc@2000 { + compatible = "sirf,prima2-minigpsrtc"; + reg = <0x2000 0x1000>; + interrupts = <54>; + }; + pwrc@3000 { compatible = "sirf,prima2-pwrc"; reg = <0x3000 0x1000>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index d7c5d721a5c7..a70546945985 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -10,5 +10,29 @@ marvell,intc-priority; marvell,intc-nr-irqs = <34>; }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + }; + + pwm2: pwm@40c00000 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40c00000 0x10>; + #pwm-cells = <1>; + }; + + pwm3: pwm@40c00010 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40c00010 0x10>; + #pwm-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2ebb4f09a9b6..6ac94967d2d3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -29,5 +29,69 @@ <1 1 0xf08>; clock-frequency = <19200000>; }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 1fb20f2333cc..b1deaf7e2e06 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r7s72100.dtsi" +#include "r7s72100.dtsi" / { model = "Genmai"; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 9443e93d3cac..70b1fff8f4a3 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r8a73a4.dtsi" +#include "r8a73a4.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -25,6 +25,11 @@ reg = <0 0x40000000 0 0x40000000>; }; + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + vcc_mmc0: regulator@0 { compatible = "regulator-fixed"; regulator-name = "MMC0 Vcc"; @@ -88,22 +93,22 @@ pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; - scifa0_pins: scifa0 { + scifa0_pins: serial0 { renesas,groups = "scifa0_data"; renesas,function = "scifa0"; }; - mmc0_pins: mmcif { + mmc0_pins: mmc { renesas,groups = "mmc0_data8", "mmc0_ctrl"; renesas,function = "mmc0"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; renesas,function = "sdhi0"; }; - sdhi1_pins: sdhi1 { + sdhi1_pins: sd1 { renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 91436b58016f..ce085fa444a1 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -9,7 +9,8 @@ */ /dts-v1/; -/include/ "r8a73a4.dtsi" +#include "r8a73a4.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "APE6EVM"; @@ -24,6 +25,11 @@ reg = <0 0x40000000 0 0x40000000>; }; + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + ape6evm_fixed_3v3: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "3V3"; @@ -40,7 +46,7 @@ compatible = "smsc,lan9118", "smsc,lan9115"; reg = <0x08000000 0x1000>; interrupt-parent = <&irqc1>; - interrupts = <8 0x4>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "mii"; reg-io-width = <4>; smsc,irq-active-high; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 287e047592a0..62d0211bd192 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -9,6 +9,9 @@ * kind, whether express or implied. */ +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a73a4"; interrupt-parent = <&gic>; @@ -36,15 +39,15 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -53,14 +56,38 @@ interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, - <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>, - <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>, - <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>, - <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>, - <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>, - <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>, - <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; }; irqc1: interrupt-controller@e61c0200 { @@ -69,13 +96,32 @@ interrupt-controller; reg = <0 0xe61c0200 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, - <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>, - <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>, - <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>, - <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>, - <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>, - <0 56 4>, <0 57 4>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>, + <0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 39 IRQ_TYPE_LEVEL_HIGH>, + <0 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 IRQ_TYPE_LEVEL_HIGH>, + <0 43 IRQ_TYPE_LEVEL_HIGH>, + <0 44 IRQ_TYPE_LEVEL_HIGH>, + <0 45 IRQ_TYPE_LEVEL_HIGH>, + <0 46 IRQ_TYPE_LEVEL_HIGH>, + <0 47 IRQ_TYPE_LEVEL_HIGH>, + <0 48 IRQ_TYPE_LEVEL_HIGH>, + <0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 50 IRQ_TYPE_LEVEL_HIGH>, + <0 51 IRQ_TYPE_LEVEL_HIGH>, + <0 52 IRQ_TYPE_LEVEL_HIGH>, + <0 53 IRQ_TYPE_LEVEL_HIGH>, + <0 54 IRQ_TYPE_LEVEL_HIGH>, + <0 55 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>, + <0 57 IRQ_TYPE_LEVEL_HIGH>; }; dmac: dma-multiplexer@0 { @@ -91,27 +137,27 @@ compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; interrupt-parent = <&gic>; - interrupts = <0 220 4 - 0 200 4 - 0 201 4 - 0 202 4 - 0 203 4 - 0 204 4 - 0 205 4 - 0 206 4 - 0 207 4 - 0 208 4 - 0 209 4 - 0 210 4 - 0 211 4 - 0 212 4 - 0 213 4 - 0 214 4 - 0 215 4 - 0 216 4 - 0 217 4 - 0 218 4 - 0 219 4>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH + 0 215 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -126,7 +172,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupt-parent = <&gic>; - interrupts = <0 69 4>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6500000 { @@ -135,7 +181,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 174 0x4>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -145,7 +191,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 175 0x4>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -155,7 +201,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 176 0x4>; + interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -165,7 +211,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 177 0x4>; + interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -175,7 +221,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 178 0x4>; + interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -185,7 +231,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 179 0x4>; + interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -195,7 +241,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 184 0x4>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -205,7 +251,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 185 0x4>; + interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -215,24 +261,24 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 173 0x4>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - mmcif0: mmcif@ee200000 { + mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 169 0x4>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; - mmcif1: mmcif@ee220000 { + mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 170 0x4>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; @@ -242,31 +288,47 @@ reg = <0 0xe6050000 0 0x9000>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, + <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, + <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, + <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, + <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, + <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, + <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, + <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, + <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, + <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, + <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, + <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, + <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, + <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, + <&irqc1 24 0>, <&irqc1 25 0>; }; - sdhi0: sdhi@ee100000 { + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 165 4>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; - sdhi1: sdhi@ee120000 { + sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 166 4>; + interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { + sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 167 4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 1c56c5e56950..95a849bf921f 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -9,8 +9,9 @@ */ /dts-v1/; -/include/ "r8a7740.dtsi" +#include "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -62,6 +63,44 @@ enable-active-high; }; + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-5.0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&pfc 99 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "SW3"; + gpio-key,wakeup; + }; + + back-key { + gpios = <&pfc 100 GPIO_ACTIVE_LOW>; + linux,code = <158>; + label = "SW4"; + }; + + menu-key { + gpios = <&pfc 97 GPIO_ACTIVE_LOW>; + linux,code = <139>; + label = "SW5"; + }; + + home-key { + gpios = <&pfc 98 GPIO_ACTIVE_LOW>; + linux,code = <102>; + label = "SW6"; + }; + }; + leds { compatible = "gpio-leds"; led1 { @@ -85,32 +124,58 @@ default-brightness-level = <9>; pinctrl-0 = <&backlight_pins>; pinctrl-names = "default"; + power-supply = <®_5p0v>; + enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + bitclock-inversion; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + bitclock-master; + frame-master; + system-clock-frequency = <12288000>; + }; }; }; &i2c0 { status = "okay"; - touchscreen: st1232@55 { + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; interrupt-parent = <&irqpin1>; - interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&st1232_pins>; pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; + + wm8978: wm8978@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; }; &pfc { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; - scifa1_pins: scifa1 { + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; }; - st1232_pins: st1232 { + st1232_pins: touchscreen { renesas,groups = "intc_irq10"; renesas,function = "intc"; }; @@ -125,10 +190,16 @@ renesas,function = "mmc0"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; renesas,function = "sdhi0"; }; + + fsia_pins: sounda { + renesas,groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + renesas,function = "fsia"; + }; }; &tpu { @@ -155,3 +226,10 @@ cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 426cd9c3e1c4..a06a11e1a840 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r8a7740.dtsi" +#include "r8a7740.dtsi" / { model = "armadillo 800 eva"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index ae1e230f711d..8280884bfa59 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -10,6 +10,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7740"; @@ -34,12 +36,12 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 83 4>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin0: IRQ0 - IRQ7 */ irqpin0: irqpin@e6900000 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900000 4>, @@ -48,19 +50,19 @@ <0xe6900040 1>, <0xe6900060 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin1: IRQ8 - IRQ15 */ irqpin1: irqpin@e6900004 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900004 4>, @@ -69,19 +71,19 @@ <0xe6900044 1>, <0xe6900064 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin2: IRQ16 - IRQ23 */ irqpin2: irqpin@e6900008 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900008 4>, @@ -90,19 +92,19 @@ <0xe6900048 1>, <0xe6900068 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin3: IRQ24 - IRQ31 */ irqpin3: irqpin@e690000c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe690000c 4>, @@ -111,14 +113,14 @@ <0xe690004c 1>, <0xe690006c 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@fff20000 { @@ -127,10 +129,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 201 0x4 - 0 202 0x4 - 0 203 0x4 - 0 204 0x4>; + interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,10 +142,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 70 0x4 - 0 71 0x4 - 0 72 0x4 - 0 73 0x4>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH + 0 71 IRQ_TYPE_LEVEL_HIGH + 0 72 IRQ_TYPE_LEVEL_HIGH + 0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -153,6 +155,15 @@ <0xe605800c 0x20>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; }; tpu: pwm@e6600000 { @@ -162,36 +173,57 @@ #pwm-cells = <3>; }; - mmcif0: mmcif@e6bd0000 { + mmcif0: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 56 4 - 0 57 4>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH + 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - sdhi0: sdhi@e6850000 { + sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 117 4 - 0 118 4 - 0 119 4>; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH + 0 118 IRQ_TYPE_LEVEL_HIGH + 0 119 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; }; - sdhi1: sdhi@e6860000 { + sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 121 4 - 0 122 4 - 0 123 4>; + interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH + 0 122 IRQ_TYPE_LEVEL_HIGH + 0 123 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@e6870000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6870000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH + 0 126 IRQ_TYPE_LEVEL_HIGH + 0 127 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; }; + + sh_fsi2: sound@fe1f0000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xfe1f0000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 969e386e852c..bb62c7a906f4 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -15,7 +15,8 @@ */ /dts-v1/; -/include/ "r8a7778.dtsi" +#include "r8a7778.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "bockw"; @@ -45,13 +46,65 @@ phy-mode = "mii"; interrupt-parent = <&irqpin>; - interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */ + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; + +}; + +&mmcif { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + broken-cd; + status = "okay"; }; &irqpin { status = "okay"; }; + +&pfc { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_a", "scif0_ctrl"; + renesas,function = "scif0"; + }; + + mmc_pins: mmc { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", + "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0_a"; + renesas,function = "hspi0"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 12bbebc9c955..46a884d45175 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "r8a7778.dtsi" +#include "r8a7778.dtsi" / { model = "bockw"; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index a6308a399e2d..ddb3bd7a8838 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -16,6 +16,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7778"; @@ -25,6 +27,12 @@ }; }; + aliases { + spi0 = &hspi0; + spi1 = &hspi1; + spi2 = &hspi2; + }; + gic: interrupt-controller@fe438000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -35,7 +43,7 @@ /* irqpin: IRQ0 - IRQ3 */ irqpin: irqpin@fe78001c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; status = "disabled"; /* default off */ @@ -45,10 +53,10 @@ <0xfe780044 4>, <0xfe780064 4>; interrupt-parent = <&gic>; - interrupts = <0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4>; + interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -56,7 +64,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -68,7 +76,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -80,7 +88,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -92,7 +100,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -104,7 +112,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 27>; @@ -114,6 +122,148 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7778"; - reg = <0xfffc000 0x118>; + reg = <0xfffc0000 0x118>; + }; + + i2c0: i2c@ffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@ffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@ffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@ffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmcif: mmc@ffe4e000 { + compatible = "renesas,sh-mmcif"; + reg = <0xffe4e000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhi0: sd@ffe4c000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4c000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@ffe4d000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4d000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@ffe4f000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4f000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + i2c0: i2c@ffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@ffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@ffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@ffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi0: spi@fffc7000 { + compatible = "renesas,hspi"; + reg = <0xfffc7000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi1: spi@fffc8000 { + compatible = "renesas,hspi"; + reg = <0xfffc8000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi2: spi@fffc6000 { + compatible = "renesas,hspi"; + reg = <0xfffc6000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index ab4110aa3c3b..76f5eef7d1cc 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -10,8 +10,9 @@ */ /dts-v1/; -/include/ "r8a7779.dtsi" +#include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "marzen"; @@ -43,7 +44,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; - interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */ + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; @@ -68,7 +69,7 @@ }; &pfc { - pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; + pinctrl-0 = <&scif2_pins &scif4_pins>; pinctrl-names = "default"; lan0_pins: lan0 { @@ -82,19 +83,38 @@ }; }; - scif2_pins: scif2 { + scif2_pins: serial2 { renesas,groups = "scif2_data_c"; renesas,function = "scif2"; }; - scif4_pins: scif4 { + scif4_pins: serial4 { renesas,groups = "scif4_data"; renesas,function = "scif4"; }; - sdhi0_pins: sdhi0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", - "sdhi0_wp"; + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; renesas,function = "sdhi0"; }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index f3f7f7999736..a7af2c2371f2 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "r8a7779.dtsi" +#include "r8a7779.dtsi" / { model = "marzen"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 19faeac3fd2e..d0561d4c7c46 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -11,6 +11,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7779"; @@ -40,6 +42,12 @@ }; }; + aliases { + spi0 = &hspi0; + spi1 = &hspi1; + spi2 = &hspi2; + }; + gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -52,7 +60,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 141 0x4>; + interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -64,7 +72,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 142 0x4>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -76,7 +84,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 143 0x4>; + interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -88,7 +96,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 144 0x4>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -100,7 +108,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 145 0x4>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -112,7 +120,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 146 0x4>; + interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -124,7 +132,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 147 0x4>; + interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; @@ -133,7 +141,7 @@ }; irqpin0: irqpin@fe780010 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; #interrupt-cells = <2>; status = "disabled"; interrupt-controller; @@ -143,50 +151,50 @@ <0xfe780044 4>, <0xfe780064 4>; interrupt-parent = <&gic>; - interrupts = <0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4>; + interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 79 0x4>; + interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 82 0x4>; + interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 80 0x4>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 81 0x4>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -204,6 +212,70 @@ compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 100 0x4>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + }; + + sdhi0: sd@ffe4c000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4c000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@ffe4d000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4d000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@ffe4e000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4e000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi3: sd@ffe4f000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4f000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + hspi0: spi@fffc7000 { + compatible = "renesas,hspi"; + reg = <0xfffc7000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi1: spi@fffc8000 { + compatible = "renesas,hspi"; + reg = <0xfffc8000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi2: spi@fffc6000 { + compatible = "renesas,hspi"; + reg = <0xfffc6000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts b/arch/arm/boot/dts/r8a7790-lager-reference.dts deleted file mode 100644 index c462ef138922..000000000000 --- a/arch/arm/boot/dts/r8a7790-lager-reference.dts +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Device Tree Source for the Lager board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -/include/ "r8a7790.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Lager"; - compatible = "renesas,lager-reference", "renesas,r8a7790"; - - chosen { - bootargs = "console=ttySC6,115200 ignore_loglevel rw"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x80000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - - leds { - compatible = "gpio-leds"; - led6 { - gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; - }; - led7 { - gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; - }; - led8 { - gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 203bd089af29..57569cba1528 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -9,7 +9,8 @@ */ /dts-v1/; -/include/ "r8a7790.dtsi" +#include "r8a7790.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Lager"; @@ -24,8 +25,69 @@ reg = <0 0x40000000 0 0x80000000>; }; + memory@180000000 { + device_type = "memory"; + reg = <1 0x80000000 0 0x80000000>; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + }; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data"; + renesas,function = "scif1"; + }; + + mmc1_pins: mmc1 { + renesas,groups = "mmc1_data8", "mmc1_ctrl"; + renesas,function = "mmc1"; + }; +}; + +&mmcif1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + non-removable; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 9987dd0e9c59..f48487c2a970 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -8,6 +8,10 @@ * kind, whether express or implied. */ +#include <dt-bindings/clock/r8a7790-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7790"; interrupt-parent = <&gic>; @@ -84,14 +88,14 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 4 0x4>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -103,7 +107,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 5 0x4>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -115,7 +119,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 6 0x4>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -127,7 +131,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 7 0x4>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -139,7 +143,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 8 0x4>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -151,7 +155,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 9 0x4>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -159,21 +163,31 @@ interrupt-controller; }; + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a7790", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6508000 { @@ -182,7 +196,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6508000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 287 0x4>; + interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C0>; status = "disabled"; }; @@ -192,7 +207,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6518000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 288 0x4>; + interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C1>; status = "disabled"; }; @@ -202,7 +218,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6530000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 286 0x4>; + interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C2>; status = "disabled"; }; @@ -212,24 +229,27 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6540000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 290 0x4>; + interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C3>; status = "disabled"; }; mmcif0: mmcif@ee200000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 169 0x4>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; reg-io-width = <4>; status = "disabled"; }; - mmcif1: mmcif@ee220000 { - compatible = "renesas,sh-mmcif"; + mmcif1: mmc@ee220000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 170 0x4>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; reg-io-width = <4>; status = "disabled"; }; @@ -239,39 +259,372 @@ reg = <0 0xe6060000 0 0x250>; }; - sdhi0: sdhi@ee100000 { + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 165 4>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; cap-sd-highspeed; status = "disabled"; }; - sdhi1: sdhi@ee120000 { + sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 166 4>; + interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { + sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 167 4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; cap-sd-highspeed; status = "disabled"; }; - sdhi3: sdhi@ee160000 { + sdhi3: sd@ee160000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 168 4>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; cap-sd-highspeed; status = "disabled"; }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", + "z"; + }; + + /* Variable factor clocks */ + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + sd3_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd3"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + mmc1_clk: mmc1_clk@e6150244 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150244 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc1"; + }; + ssp_clk: ssp_clk@e6150248 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150248 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssp"; + }; + ssprs_clk: ssprs_clk@e615024c { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615024c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssprs"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + z2_clk: z2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "z2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "vsp1-du0", "vsp1-rt", "vsp1-sy"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 + R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 + R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "msiof3", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>, <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1 + >; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0", "cmt1"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>; + clock-output-names = "thermal", "pwm"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, + <&zx_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 + R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 + R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 + R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0 + >; + clock-output-names = + "ehci", "hsusb", "hscif1", "hscif0", "scif1", + "scif0", "du2", "du1", "du0", "lvds1", "lvds0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_ETHER>; + clock-output-names = "ether"; + }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD + R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 + R8A7790_CLK_I2C0 + >; + clock-output-names = + "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts new file mode 100644 index 000000000000..588ca17ea1f0 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts @@ -0,0 +1,115 @@ +/* + * Device Tree Source for the Koelsch board + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Koelsch"; + compatible = "renesas,koelsch-reference", "renesas,r8a7791"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-a { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <30>; + label = "SW30"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <48>; + label = "SW31"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <46>; + label = "SW32"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <32>; + label = "SW33"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-e { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <18>; + label = "SW34"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-f { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <33>; + label = "SW35"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-g { + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <34>; + label = "SW36"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 1ce5250ec278..fd556c3483e3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -10,7 +10,8 @@ */ /dts-v1/; -/include/ "r8a7791.dtsi" +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Koelsch"; @@ -29,4 +30,36 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index fea5cfef4691..19c65509a22d 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -9,6 +9,10 @@ * kind, whether express or implied. */ +#include <dt-bindings/clock/r8a7791-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7791"; interrupt-parent = <&gic>; @@ -43,32 +47,463 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a7791", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, - <0 1 4>, - <0 2 4>, - <0 3 4>, - <0 12 4>, - <0 13 4>, - <0 14 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7791"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7791-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Variable factor clocks */ + sd1_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd1"; + }; + sd2_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + ssp_clk: ssp_clk@e6150248 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150248 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssp"; + }; + ssprs_clk: ssprs_clk@e615024c { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615024c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssprs"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "vsp1-du0", "vsp1-sy"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 + R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 + R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "misof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, + <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 + R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + >; + clock-output-names = + "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>; + clock-output-names = "thermal", "pwm"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&zx_clk>, <&zx_clk>, <&zx_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 + R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 + R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 + R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 + R8A7791_CLK_LVDS0 + >; + clock-output-names = + "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_ETHER>; + clock-output-names = "ether"; + }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD + R8A7791_CLK_I2C4 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 + R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + >; + clock-output-names = + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", + "i2c2", "i2c1", "i2c0"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index de9feced9935..1105558d188b 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> @@ -37,6 +37,7 @@ i2c2 = &i2c2; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <1>; @@ -179,6 +180,15 @@ status = "disabled"; }; + pwm0: pwm@f002c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf002c000 0x300>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; @@ -304,6 +314,8 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi2_clk>; @@ -333,21 +345,35 @@ }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; }; dma0: dma-controller@ffffe600 { @@ -486,6 +512,14 @@ }; }; + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ + }; + }; + isi { pinctrl_isi: isi-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi new file mode 100644 index 000000000000..6c31c26e6cc0 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36.dtsi @@ -0,0 +1,20 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts new file mode 100644 index 000000000000..59576c6f9826 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36ek.dts @@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 49d4d76ca6f4..a9fa75e41652 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -12,6 +12,11 @@ #include <dt-bindings/clk/at91.h> / { + aliases { + serial5 = &uart0; + serial6 = &uart1; + }; + ahb { apb { pinctrl@fffff200 { diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 1c296d6b2f2a..f9bdde542ced 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -18,6 +18,7 @@ interrupts = <31 0x0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts index 8acf51e0cdae..a759a276c9a9 100644 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "sh7372.dtsi" +#include "sh7372.dtsi" / { model = "Mackerel (AP4 EVM 2nd)"; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 8ee06dd81799..eb8886b535e4 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -12,8 +12,9 @@ */ /dts-v1/; -/include/ "sh73a0.dtsi" +#include "sh73a0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "KZM-A9-GT"; @@ -82,7 +83,7 @@ reg = <0x10000000 0x100>; phy-mode = "mii"; interrupt-parent = <&irqpin0>; - interrupts = <3 0>; /* active low */ + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; smsc,irq-push-pull; smsc,save-mac-address; @@ -105,6 +106,66 @@ gpios = <&pfc 23 GPIO_ACTIVE_LOW>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + back-key { + gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; + linux,code = <158>; + label = "SW3"; + }; + + right-key { + gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; + linux,code = <106>; + label = "SW2-R"; + }; + + left-key { + gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; + linux,code = <105>; + label = "SW2-L"; + }; + + enter-key { + gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; + linux,code = <28>; + label = "SW2-P"; + }; + + up-key { + gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; + linux,code = <103>; + label = "SW2-U"; + }; + + down-key { + gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; + linux,code = <108>; + label = "SW2-D"; + }; + + home-key { + gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; + linux,code = <102>; + label = "SW1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + system-clock-frequency = <11289600>; + }; + }; }; &i2c0 { @@ -179,12 +240,29 @@ }; }; }; + + ak4648: ak4648@0x12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; }; &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; status = "okay"; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; &mmcif { @@ -205,7 +283,7 @@ renesas,function = "i2c3"; }; - mmcif_pins: mmcif { + mmcif_pins: mmc { mux { renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; renesas,function = "mmc0"; @@ -217,20 +295,26 @@ }; }; - scifa4_pins: scifa4 { + scifa4_pins: serial4 { renesas,groups = "scifa4_data", "scifa4_ctrl"; renesas,function = "scifa4"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; renesas,function = "sdhi0"; }; - sdhi2_pins: sdhi2 { + sdhi2_pins: sd2 { renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; + + fsia_pins: sounda { + renesas,groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + renesas,function = "fsia"; + }; }; &sdhi0 { @@ -251,3 +335,10 @@ broken-cd; status = "okay"; }; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 0f1ca7792c46..27c5f426d172 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "sh73a0.dtsi" +#include "sh73a0.dtsi" / { model = "KZM-A9-GT"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index fcf26889a8a0..b7bd3b9a6753 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -10,6 +10,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,sh73a0"; @@ -40,12 +42,12 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 55 4>, - <0 56 4>; + interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>; }; irqpin0: irqpin@e6900000 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900000 4>, @@ -54,18 +56,18 @@ <0xe6900040 1>, <0xe6900060 1>; interrupt-parent = <&gic>; - interrupts = <0 1 0x4 - 0 2 0x4 - 0 3 0x4 - 0 4 0x4 - 0 5 0x4 - 0 6 0x4 - 0 7 0x4 - 0 8 0x4>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH + 0 2 IRQ_TYPE_LEVEL_HIGH + 0 3 IRQ_TYPE_LEVEL_HIGH + 0 4 IRQ_TYPE_LEVEL_HIGH + 0 5 IRQ_TYPE_LEVEL_HIGH + 0 6 IRQ_TYPE_LEVEL_HIGH + 0 7 IRQ_TYPE_LEVEL_HIGH + 0 8 IRQ_TYPE_LEVEL_HIGH>; }; irqpin1: irqpin@e6900004 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900004 4>, @@ -74,19 +76,19 @@ <0xe6900044 1>, <0xe6900064 1>; interrupt-parent = <&gic>; - interrupts = <0 9 0x4 - 0 10 0x4 - 0 11 0x4 - 0 12 0x4 - 0 13 0x4 - 0 14 0x4 - 0 15 0x4 - 0 16 0x4>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH + 0 10 IRQ_TYPE_LEVEL_HIGH + 0 11 IRQ_TYPE_LEVEL_HIGH + 0 12 IRQ_TYPE_LEVEL_HIGH + 0 13 IRQ_TYPE_LEVEL_HIGH + 0 14 IRQ_TYPE_LEVEL_HIGH + 0 15 IRQ_TYPE_LEVEL_HIGH + 0 16 IRQ_TYPE_LEVEL_HIGH>; control-parent; }; irqpin2: irqpin@e6900008 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900008 4>, @@ -95,18 +97,18 @@ <0xe6900048 1>, <0xe6900068 1>; interrupt-parent = <&gic>; - interrupts = <0 17 0x4 - 0 18 0x4 - 0 19 0x4 - 0 20 0x4 - 0 21 0x4 - 0 22 0x4 - 0 23 0x4 - 0 24 0x4>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH + 0 18 IRQ_TYPE_LEVEL_HIGH + 0 19 IRQ_TYPE_LEVEL_HIGH + 0 20 IRQ_TYPE_LEVEL_HIGH + 0 21 IRQ_TYPE_LEVEL_HIGH + 0 22 IRQ_TYPE_LEVEL_HIGH + 0 23 IRQ_TYPE_LEVEL_HIGH + 0 24 IRQ_TYPE_LEVEL_HIGH>; }; irqpin3: irqpin@e690000c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe690000c 4>, @@ -115,14 +117,14 @@ <0xe690004c 1>, <0xe690006c 1>; interrupt-parent = <&gic>; - interrupts = <0 25 0x4 - 0 26 0x4 - 0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4 - 0 31 0x4 - 0 32 0x4>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH + 0 26 IRQ_TYPE_LEVEL_HIGH + 0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH + 0 31 IRQ_TYPE_LEVEL_HIGH + 0 32 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6820000 { @@ -131,10 +133,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 167 0x4 - 0 168 0x4 - 0 169 0x4 - 0 170 0x4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH + 0 168 IRQ_TYPE_LEVEL_HIGH + 0 169 IRQ_TYPE_LEVEL_HIGH + 0 170 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -144,10 +146,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 51 0x4 - 0 52 0x4 - 0 53 0x4 - 0 54 0x4>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH + 0 52 IRQ_TYPE_LEVEL_HIGH + 0 53 IRQ_TYPE_LEVEL_HIGH + 0 54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -157,10 +159,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 171 0x4 - 0 172 0x4 - 0 173 0x4 - 0 174 0x4>; + interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH + 0 172 IRQ_TYPE_LEVEL_HIGH + 0 173 IRQ_TYPE_LEVEL_HIGH + 0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -170,10 +172,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 183 0x4 - 0 184 0x4 - 0 185 0x4 - 0 186 0x4>; + interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH + 0 184 IRQ_TYPE_LEVEL_HIGH + 0 185 IRQ_TYPE_LEVEL_HIGH + 0 186 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,52 +185,52 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 187 0x4 - 0 188 0x4 - 0 189 0x4 - 0 190 0x4>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH + 0 188 IRQ_TYPE_LEVEL_HIGH + 0 189 IRQ_TYPE_LEVEL_HIGH + 0 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - mmcif: mmcif@e6bd0000 { + mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; + interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH + 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; - sdhi0: sdhi@ee100000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 83 4 - 0 84 4 - 0 85 4>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH + 0 84 IRQ_TYPE_LEVEL_HIGH + 0 85 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ - sdhi1: sdhi@ee120000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 88 4 - 0 89 4>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH + 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 104 4 - 0 105 4>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH + 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -240,5 +242,23 @@ <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + }; + + sh_fsi2: sound@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index f936476c2753..537f1a5c07f5 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -79,6 +79,8 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + clocks = <&l4_main_clk>; + clock-names = "apb_pclk"; }; }; @@ -467,6 +469,8 @@ interrupts = <0 38 0x04>; cache-unified; cache-level = <2>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <2 1 1>; }; /* Local timer */ diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h index 8c45d85ac13e..4851c387d52d 100644 --- a/arch/arm/boot/dts/st-pincfg.h +++ b/arch/arm/boot/dts/st-pincfg.h @@ -15,7 +15,7 @@ /* Pull Up */ #define PU (1 << 26) /* Open Drain */ -#define OD (1 << 26) +#define OD (1 << 25) #define RT (1 << 23) #define INVERTCLK (1 << 22) #define CLKNOTDATA (1 << 21) diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 7da99fe497e1..e0853ea02df2 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -913,6 +913,10 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; clock-names = "msp", "apb_pclk"; @@ -925,6 +929,9 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "tx"; + clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; clock-names = "msp", "apb_pclk"; @@ -938,6 +945,11 @@ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev + HighPrio - Fixed */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; clock-names = "msp", "apb_pclk"; @@ -950,6 +962,9 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ + dma-names = "rx"; + clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; clock-names = "msp", "apb_pclk"; @@ -987,6 +1002,23 @@ status = "disabled"; }; + mcde@a0350000 { + compatible = "stericsson,mcde"; + reg = <0xa0350000 0x1000>, /* MCDE */ + <0xa0351000 0x1000>, /* DSI link 1 */ + <0xa0352000 0x1000>, /* DSI link 2 */ + <0xa0353000 0x1000>; /* DSI link 3 */ + interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ + <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ + <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ + <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ + <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ + <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ + <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ + <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ + }; + cryp@a03cb000 { compatible = "stericsson,ux500-cryp"; reg = <0xa03cb000 0x1000>; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi new file mode 100644 index 000000000000..addfcc7c2750 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -0,0 +1,745 @@ +/* + * Copyright 2013 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "ste-nomadik-pinctrl.dtsi" + +/ { + soc { + pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + + sleep_cfg3 { + ste,pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + ste,function = "u1"; + ste,pins = "u1rxtx_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + ste,function = "u2"; + ste,pins = "u2rxtx_c_1"; + }; + default_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_default_mode: i2c_default { + default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_default_mode: i2c_default { + default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_b_2"; + }; + default_cfg1 { + ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_default_mode: i2c_default { + default_mux { + ste,function = "i2c2"; + ste,pins = "i2c2_b_2"; + }; + default_cfg1 { + ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_default_mode: i2c_default { + default_mux { + ste,function = "i2c3"; + ste,pins = "i2c3_c_2"; + }; + default_cfg1 { + ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c3_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_default_mode: i2c_default { + default_mux { + ste,function = "i2c4"; + ste,pins = "i2c4_b_1"; + }; + default_cfg1 { + ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all SPI default and sleep states */ + spi2 { + spi2_default_mode: spi_default { + default_mux { + ste,function = "spi2"; + ste,pins = "spi2_oc1_2"; + }; + default_cfg1 { + ste,pins = "GPIO216_AG12"; /* FRM */ + ste,config = <&gpio_out_hi>; + }; + default_cfg2 { + ste,pins = "GPIO218_AH11"; /* RXD */ + ste,config = <&in_pd>; + }; + default_cfg3 { + ste,pins = + "GPIO215_AH13", /* TXD */ + "GPIO217_AH12"; /* CLK */ + ste,config = <&out_lo>; + }; + }; + + spi2_idle_mode: spi_idle { + /* + * The idle mode is basically sleep mode sans wakeups. Also + * note that we have muxes the pins off the function here + * as we do not state any muxing. + */ + idle_cfg1 { + ste,pins = "GPIO218_AH11"; /* RXD */ + ste,config = <&slpm_in_pdis>; + }; + idle_cfg2 { + ste,pins = "GPIO215_AH13"; /* TXD */ + ste,config = <&slpm_out_lo_pdis>; + }; + idle_cfg3 { + ste,pins = "GPIO217_AH12"; /* CLK */ + ste,config = <&slpm_pdis>; + }; + }; + + spi2_sleep_mode: spi_sleep { + sleep_cfg1 { + ste,pins = + "GPIO216_AG12", /* FRM */ + "GPIO218_AH11"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = "GPIO215_AH13"; /* TXD */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = "GPIO217_AH12"; /* CLK */ + ste,config = <&slpm_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + sdi0_default_mode: sdi0_default { + default_mux { + ste,function = "mc0"; + ste,pins = "mc0_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + ste,pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + ste,pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi0_sleep_mode: sdi0_sleep { + sleep_cfg1 { + ste,pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + sdi1_default_mode: sdi1_default { + default_mux { + ste,function = "mc1"; + ste,pins = "mc1_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi1_sleep_mode: sdi1_sleep { + sleep_cfg1 { + ste,pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + sdi2_default_mode: sdi2_default { + default_mux { + ste,function = "mc2"; + ste,pins = "mc2_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi2_sleep_mode: sdi2_sleep { + sleep_cfg1 { + ste,pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + ste,pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + sdi4_default_mode: sdi4_default { + default_mux { + ste,function = "mc4"; + ste,pins = "mc4_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi4_sleep_mode: sdi4_sleep { + sleep_cfg1 { + ste,pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0_default_mode: msp0_default { + default_msp0_mux { + ste,function = "msp0"; + ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + ste,pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1_default_mode: msp1_default { + default_mux { + ste,function = "msp1"; + ste,pins = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + + }; + }; + + msp2 { + msp2_default_mode: msp2_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + ste,function = "msp2"; + ste,pins = "msp2_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + ste,pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + + musb { + musb_default_mode: musb_default { + default_mux { + ste,function = "usb"; + ste,pins = "usb_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + ste,pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + musb_sleep_mode: musb_sleep { + sleep_cfg1 { + ste,pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + ste,pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; + + mcde { + lcd_default_mode: lcd_default { + default_mux { + /* Mux in VSI0 and all the data lines */ + ste,function = "lcd"; + ste,pins = + "lcdvsi0_a_1", /* VSI0 for LCD */ + "lcd_d0_d7_a_1", /* Data lines */ + "lcd_d8_d11_a_1", /* TV-out */ + "lcdaclk_b_1", /* Clock line for TV-out */ + "lcdvsi1_a_1"; /* VSI1 for HDMI */ + }; + default_cfg1 { + ste,pins = + "GPIO68_E1", /* VSI0 */ + "GPIO69_E2"; /* VSI1 */ + ste,config = <&in_pu>; + }; + }; + lcd_sleep_mode: lcd_sleep { + sleep_cfg1 { + ste,pins = "GPIO69_E2"; /* VSI1 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + ske { + /* SKE keys on position 2 in an 8x8 matrix */ + ske_kpa2_default_mode: ske_kpa2_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_2"; + }; + default_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&in_pd>; + }; + default_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&out_lo>; + }; + }; + ske_kpa2_sleep_mode: ske_kpa2_sleep { + sleep_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&slpm_in_pu_wkup_pdis_en>; + }; + sleep_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&slpm_out_lo_pdis>; + }; + }; + /* + * SKE keys on position 1 and "other C1" combi giving + * six rows of six keys. + */ + ske_kpaoc1_default_mode: ske_kpaoc1_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_1", "kp_oc1_1"; + }; + default_cfg1 { + ste,pins = + "GPIO91_B6", /* KP_O0 */ + "GPIO90_A3", /* KP_O1 */ + "GPIO87_B3", /* KP_O2 */ + "GPIO86_C6", /* KP_O3 */ + "GPIO96_D8", /* KP_O6 */ + "GPIO94_D7"; /* KP_O7 */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = + "GPIO93_B7", /* KP_I0 */ + "GPIO92_D6", /* KP_I1 */ + "GPIO89_E6", /* KP_I2 */ + "GPIO88_C4", /* KP_I3 */ + "GPIO97_D9", /* KP_I6 */ + "GPIO95_E8"; /* KP_I7 */ + ste,config = <&in_pu>; + }; + }; + }; + + wlan { + wlan_default_mode: wlan_default { + /* + * Activate this mode with the WLAN chip. + * These are plain GPIO pins used by WLAN + */ + default_cfg1 { + ste,pins = + "GPIO226_AF8", /* WLAN_PMU_EN */ + "GPIO85_D5"; /* WLAN_ENA */ + ste,config = <&gpio_out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 76704ec0ffcc..1c3574435ea8 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -12,6 +12,28 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 0x4>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 0x4>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { i2c@80004000 { stmpe1601: stmpe1601@40 { @@ -74,5 +96,24 @@ rohm,flip-y; }; }; + + pinctrl { + prox { + prox_stuib_mode: prox_stuib { + stuib_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_stuib_mode: stuib_tvk { + stuib_cfg { + ste,pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 76d3ef13175f..c40565320978 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -14,27 +14,105 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 0x4>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 0x4>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { - /* Add Synaptics touch screen, TC35892 keypad etc here */ + /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { - tc3589x@44 { - compatible = "tc3589x"; + tc35893@44 { + compatible = "toshiba,tc35893"; reg = <0x44>; interrupt-parent = <&gpio6>; interrupts = <26 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + linux,wakeup; + linux,keymap = <0x0301006b + 0x04010066 + 0x06040072 + 0x040200d7 + 0x0303006a + 0x0205000e + 0x0607008b + 0x0500001c + 0x0403000b + 0x03040034 + 0x05020067 + 0x0305006c + 0x040500e7 + 0x0005009e + 0x06020073 + 0x01030039 + 0x07060069 + 0x050500d9>; + }; + }; + }; + pinctrl { + /* Pull up this GPIO pin */ + tc35893 { + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + ste,pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + prox { + prox_tvk_mode: prox_tvk { + tvk_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + ste,pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index aa3f02060fdd..0c1e8d871ed1 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -11,37 +11,57 @@ #include <dt-bindings/interrupt-controller/irq.h> #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { memory { reg = <0x00000000 0x20000000>; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - linux,code = <11>; - label = "SFH7741 Proximity Sensor"; + soc { + usb_per5@a03e0000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; }; - }; - soc { uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; + i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; lp5521@33 { compatible = "national,lp5521"; reg = <0x33>; @@ -85,6 +105,12 @@ }; }; + i2c@80110000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c3_default_mode>; + pinctrl-1 = <&i2c3_sleep_mode>; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; @@ -94,8 +120,9 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; - - cd-gpios = <&tc3589x_gpio 3 0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi0_default_mode>; + pinctrl-1 = <&sdi0_sleep_mode>; status = "okay"; }; @@ -105,6 +132,9 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi1_default_mode>; + pinctrl-1 = <&sdi1_sleep_mode>; status = "okay"; }; @@ -115,6 +145,9 @@ max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi2_default_mode>; + pinctrl-1 = <&sdi2_sleep_mode>; status = "okay"; }; @@ -126,6 +159,9 @@ bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi4_default_mode>; + pinctrl-1 = <&sdi4_sleep_mode>; status = "okay"; }; @@ -137,7 +173,21 @@ stericsson,audio-codec = <&codec>; }; + msp0: msp@80123000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp0_default_mode>; + status = "okay"; + }; + msp1: msp@80124000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp1_default_mode>; + status = "okay"; + }; + + msp2: msp@80117000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp2_default_mode>; status = "okay"; }; @@ -198,5 +248,11 @@ }; }; }; + + mcde@a0350000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_default_mode>; + pinctrl-1 = <&lcd_sleep_mode>; + }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index b2cd7bc2752f..40f0ecdf9303 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -28,18 +28,20 @@ reg = <0x33>; }; - tc3589x@42 { - compatible = "tc3589x"; + tc35892@42 { + compatible = "toshiba,tc35892"; reg = <0x42>; interrupt-parent = <&gpio6>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35892_hrefprev60_mode>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -49,11 +51,77 @@ }; }; + ssp@80002000 { + /* + * On the first generation boards, this SSP/SPI port was connected + * to the AB8500. + */ + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_hrefprev60_mode>; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + cd-gpios = <&tc3589x_gpio 3 0x4>; + }; + vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; enable-gpio = <&tc3589x_gpio 17 0x4>; + }; + + pinctrl { + /* Set this up using hogs */ + pinctrl-names = "default"; + pinctrl-0 = <&ipgpio_hrefprev60_mode>; - status = "okay"; + ssp0 { + ssp0_hrefprev60_mode: ssp0_hrefprev60_default { + hrefprev60_mux { + ste,function = "ssp0"; + ste,pins = "ssp0_a_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO145_C13"; /* RXD */ + ste,config = <&in_pd>; + }; + + }; + }; + sdi0 { + /* This additional pin needed on early MOP500 and HREFs previous to v60 */ + sdi0_default_mode: sdi0_default { + hrefprev60_mux { + ste,function = "mc0"; + ste,pins = "mc0dat31dir_a_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + + }; + }; + tc35892 { + tc35892_hrefprev60_mode: tc35892_hrefprev60 { + hrefprev60_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + ipgpio { + ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { + hrefprev60_mux { + ste,function = "ipgpio"; + ste,pins = "ipgpio0_c_1", "ipgpio1_c_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index aed511b47a9e..3b6d1181939b 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -16,55 +16,226 @@ model = "ST-Ericsson HREF (v60+) platform with Device Tree"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - gpio_keys { - button@1 { - gpios = <&gpio5 25 0x4>; - }; - }; - soc { // External Micro SD slot sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - cd-gpios = <&gpio2 31 0x4>; // 95 - - status = "okay"; }; - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - - status = "okay"; - }; - - // PoP:ed eMMC - sdi2_per3@80005000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - - status = "okay"; + vmmci: regulator-gpio { + gpios = <&gpio0 5 0x4>; + enable-gpio = <&gpio5 9 0x4>; }; - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl { + /* + * Set this up using hogs, as time goes by and as seems fit, these + * can be moved over to being controlled by respective device. + */ + pinctrl-names = "default"; + pinctrl-0 = <&ipgpio_hrefv60_mode>, + <&accel_hrefv60_mode>, + <&magneto_hrefv60_mode>, + <&etm_hrefv60_mode>, + <&nahj_hrefv60_mode>, + <&nfc_hrefv60_mode>, + <&force_hrefv60_mode>, + <&dipro_hrefv60_mode>, + <&vaudio_hf_hrefv60_mode>, + <&gbf_hrefv60_mode>, + <&hdtv_hrefv60_mode>, + <&touch_hrefv60_mode>; - status = "okay"; + sdi0 { + /* SD card detect GPIO pin, extend default state */ + sdi0_default_mode: sdi0_default { + default_hrefv60_cfg1 { + ste,pins = "GPIO95_E8"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + ipgpio { + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant + * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias + * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. + */ + ipgpio_hrefv60_mode: ipgpio_hrefv60 { + hrefv60_mux { + ste,function = "ipgpio"; + ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1"; + }; + hrefv60_cfg1 { + ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + ste,config = <&in_pu>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg3 { + ste,pins = "GPIO64_F3"; + ste,config = <&out_lo>; + }; + }; + }; + accelerometer { + accel_hrefv60_mode: accel_hrefv60 { + /* Accelerometer interrupt lines 1 & 2 */ + hrefv60_cfg1 { + ste,pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_hrefv60_mode: magneto_hrefv60 { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + hrefv60_cfg1 { + ste,pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + etm { + /* + * Drive D19-D23 for the ETM PTM trace interface low, + * (presumably pins are unconnected therefore grounded here, + * the "other alt C1" setting enables these pins) + */ + etm_hrefv60_mode: etm_hrefv60 { + hrefv60_cfg1 { + ste,pins = + "GPIO70_G5", + "GPIO71_G4", + "GPIO72_H4", + "GPIO73_H3", + "GPIO74_J3"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + nahj { + nahj_hrefv60_mode: nahj_hrefv60 { + /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */ + hrefv60_cfg1 { + ste,pins = "GPIO76_J2"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO216_AG12"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + nfc { + nfc_hrefv60_mode: nfc_hrefv60 { + /* NFC ENA and RESET to low, pulldown IRQ line */ + hrefv60_cfg1 { + ste,pins = + "GPIO77_H1", /* NFC_ENA */ + "GPIO142_C11"; /* NFC_RESET */ + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO144_B13"; /* NFC_IRQ */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + force { + force_hrefv60_mode: force_hrefv60 { + hrefv60_cfg1 { + ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ + ste,config = <&gpio_in_pu>; + }; + hrefv60_cfg2 { + ste,pins = + "GPIO92_D6", /* FORCE_SENSING_RST */ + "GPIO97_D9"; /* FORCE_SENSING_WU */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + dipro { + dipro_hrefv60_mode: dipro_hrefv60 { + hrefv60_cfg1 { + ste,pins = "GPIO139_C9"; /* DIPRO_INT */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + vaudio_hf { + vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 { + /* Audio Amplifier HF enable GPIO */ + hrefv60_cfg1 { + ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + gbf { + gbf_hrefv60_mode: gbf_hrefv60 { + /* + * GBF (GPS, Bluetooth, FM-radio) interface, + * pull low to reset state + */ + hrefv60_cfg1 { + ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + hdtv { + hdtv_hrefv60_mode: hdtv_hrefv60 { + /* MSP : HDTV INTERFACE GPIO line */ + hrefv60_cfg1 { + ste,pins = "GPIO192_AJ27"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + touch { + touch_hrefv60_mode: touch_hrefv60 { + /* + * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and + * GPIO 67 for interrupts. Pull-up the IRQ line and drive both + * reset signals low. + */ + hrefv60_cfg1 { + ste,pins = "GPIO143_D12", "GPIO146_D13"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO67_G2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + mcde { + lcd_hrefv60_mode: lcd_hrefv60 { + /* + * Display Interface 1 uses GPIO 65 for RST (reset). + * Display Interface 2 uses GPIO 66 for RST (reset). + * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) + */ + hrefv60_cfg1 { + ste,pins ="GPIO65_F1"; + ste,config = <&gpio_out_hi>; + }; + hrefv60_cfg2 { + ste,pins ="GPIO66_G3"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index efddee9403c4..e6f22b266420 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -31,17 +31,57 @@ ste,output = <OUTPUT_LOW>; }; + gpio_in_pu: gpio_input_pull_up { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_PULLUP>; + }; + + gpio_in_pd: gpio_input_pull_down { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_PULLDOWN>; + }; + gpio_out_lo: gpio_output_low { ste,gpio = <GPIOMODE_ENABLED>; ste,output = <OUTPUT_LOW>; }; + gpio_out_hi: gpio_output_high { + ste,gpio = <GPIOMODE_ENABLED>; + ste,output = <OUTPUT_HIGH>; + }; + + slpm_pdis: slpm_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_wkup_pdis: slpm_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_wkup_pdis_en: slpm_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + slpm_in_pu: slpm_in_pu { ste,sleep = <SLPM_ENABLED>; ste,sleep-input = <SLPM_INPUT_PULLUP>; ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; }; + slpm_in_pdis: slpm_in_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_in_wkup_pdis: slpm_in_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-input = <SLPM_DIR_INPUT>; @@ -49,6 +89,20 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + + slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_INPUT_PULLUP>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + slpm_out_lo: slpm_out_lo { ste,sleep = <SLPM_ENABLED>; ste,sleep-output = <SLPM_OUTPUT_LOW>; @@ -68,6 +122,20 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + slpm_out_lo_pdis: slpm_out_lo_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_out_wkup_pdis: slpm_out_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-output = <SLPM_DIR_OUTPUT>; @@ -81,6 +149,18 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + in_wkup_pdis_en: in_wkup_pdis_en { + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + + out_lo_wkup_pdis: out_lo_wkup_pdis { + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + out_hi_wkup_pdis: out_hi_wkup_pdis { ste,sleep-output = <SLPM_OUTPUT_HIGH>; ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 16c3888b7b15..f557feb997f4 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -67,10 +67,6 @@ /* Custom board node with GPIO pins to active etc */ usb-s8815 { - /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ - ethernet-gpio { - gpios = <&gpio3 8 0x1>; - }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { gpios = <&gpio3 16 0x1>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 79425e3836ce..5acc0449676a 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -769,14 +769,14 @@ #size-cells = <1>; ranges; - vica: intc@0x10140000 { + vica: intc@10140000 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x20>; }; - vicb: intc@0x10140020 { + vicb: intc@10140020 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f0b39f835914..97d5d21b7db7 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -75,6 +76,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpioled_snowball_mode>; used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; @@ -84,6 +87,11 @@ }; soc { + usb_per5@a03e0000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; sound { compatible = "stericsson,snd-soc-mop500"; @@ -92,7 +100,21 @@ stericsson,audio-codec = <&codec>; }; + msp0: msp@80123000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp0_default_mode>; + status = "okay"; + }; + msp1: msp@80124000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp1_default_mode>; + status = "okay"; + }; + + msp2: msp@80117000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp2_default_mode>; status = "okay"; }; @@ -110,6 +132,8 @@ interrupt-parent = <&gpio4>; vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; + pinctrl-names = "default"; + pinctrl-0 = <ð_snowball_mode>; reg-shift = <1>; reg-io-width = <2>; @@ -122,10 +146,8 @@ }; vmmci: regulator-gpio { - gpios = <&gpio6 25 0x4>; - enable-gpio = <&gpio7 4 0x4>; - - status = "okay"; + gpios = <&gpio7 4 0x4>; + enable-gpio = <&gpio6 25 0x4>; }; // External Micro SD slot @@ -136,6 +158,9 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi0_default_mode>; + pinctrl-1 = <&sdi0_sleep_mode>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; @@ -143,6 +168,27 @@ status = "okay"; }; + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi1_default_mode>; + pinctrl-1 = <&sdi1_sleep_mode>; + + status = "okay"; + }; + + // Unused PoP eMMC - register and put it to sleep by default */ + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + pinctrl-names = "default"; + pinctrl-0 = <&sdi2_sleep_mode>; + + status = "okay"; + }; + // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; @@ -150,22 +196,63 @@ bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi4_default_mode>; + pinctrl-1 = <&sdi4_sleep_mode>; status = "okay"; }; uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; + i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + + i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; + }; + + i2c@80110000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c3_default_mode>; + pinctrl-1 = <&i2c3_sleep_mode>; + }; + + ssp@80002000 { + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_snowball_mode>; + }; + cpufreq-cooling { status = "okay"; }; @@ -266,5 +353,141 @@ }; }; }; + + pinctrl { + /* + * Set this up using hogs, as time goes by and as seems fit, these + * can be moved over to being controlled by respective device. + */ + pinctrl-names = "default"; + pinctrl-0 = <&accel_snowball_mode>, + <&magneto_snowball_mode>, + <&gbf_snowball_mode>, + <&wlan_snowball_mode>; + + ethernet { + /* + * Mux in "SM" which is used for the + * SMSC911x Ethernet adapter + */ + eth_snowball_mode: eth_snowball { + snowball_mux { + ste,function = "sm"; + ste,pins = "sm_b_1"; + }; + /* LAN IRQ pin */ + snowball_cfg1 { + ste,pins = "GPIO140_B11"; + ste,config = <&in_nopull>; + }; + /* LAN reset pin */ + snowball_cfg2 { + ste,pins = "GPIO141_C12"; + ste,config = <&gpio_out_hi>; + }; + + }; + }; + sdi0 { + sdi0_default_mode: sdi0_default { + snowball_mux { + ste,function = "mc0"; + ste,pins = "mc0dat31dir_a_1"; + }; + snowball_cfg1 { + ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + + }; + }; + ssp0 { + ssp0_snowball_mode: ssp0_snowball_default { + snowball_mux { + ste,function = "ssp0"; + ste,pins = "ssp0_a_1"; + }; + snowball_cfg1 { + ste,pins = "GPIO144_B13"; /* FRM */ + ste,config = <&gpio_out_hi>; + }; + snowball_cfg2 { + ste,pins = "GPIO145_C13"; /* RXD */ + ste,config = <&in_pd>; + }; + snowball_cfg3 { + ste,pins = + "GPIO146_D13", /* TXD */ + "GPIO143_D12"; /* CLK */ + ste,config = <&out_lo>; + }; + + }; + }; + gpio_led { + gpioled_snowball_mode: gpioled_default { + snowball_cfg1 { + ste,pins = "GPIO142_C11"; + ste,config = <&gpio_out_hi>; + }; + + }; + }; + accelerometer { + accel_snowball_mode: accel_snowball { + /* Accelerometer lines */ + snowball_cfg1 { + ste,pins = + "GPIO163_C20", /* ACCEL_IRQ1 */ + "GPIO164_B21"; /* ACCEL_IRQ2 */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_snowball_mode: magneto_snowball { + snowball_cfg1 { + ste,pins = "GPIO165_C21"; /* MAG_DRDY */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + gbf { + gbf_snowball_mode: gbf_snowball { + /* + * GBF (GPS, Bluetooth, FM-radio) interface, + * pull low to reset state + */ + snowball_cfg1 { + ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + wlan { + wlan_snowball_mode: wlan_snowball { + /* + * Activate this mode with the WLAN chip. + * These are plain GPIO pins used by WLAN + */ + snowball_cfg1 { + ste,pins = + "GPIO161_D21", /* WLAN_PMU_EN */ + "GPIO215_AH13"; /* WLAN_ENA */ + ste,config = <&gpio_out_lo>; + }; + snowball_cfg2 { + ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; + + mcde@a0350000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_default_mode>; + pinctrl-1 = <&lcd_sleep_mode>; + }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 1d322b24d1e4..e56449d41481 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -86,6 +86,24 @@ }; }; }; + + sbc_i2c0 { + pinctrl_sbc_i2c0_default: sbc_i2c0-default { + st,pins { + sda = <&PIO4 6 ALT1 BIDIR>; + scl = <&PIO4 5 ALT1 BIDIR>; + }; + }; + }; + + sbc_i2c1 { + pinctrl_sbc_i2c1_default: sbc_i2c1-default { + st,pins { + sda = <&PIO3 2 ALT2 BIDIR>; + scl = <&PIO3 1 ALT2 BIDIR>; + }; + }; + }; }; pin-controller-front { @@ -143,6 +161,24 @@ reg = <0x7000 0x100>; st,bank-name = "PIO12"; }; + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&PIO9 3 ALT1 BIDIR>; + scl = <&PIO9 2 ALT1 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&PIO12 1 ALT1 BIDIR>; + scl = <&PIO12 0 ALT1 BIDIR>; + }; + }; + }; }; pin-controller-rear { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index 74ab8ded4b49..d9c7dd1d95a4 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -9,6 +9,7 @@ #include "stih41x.dtsi" #include "stih415-clock.dtsi" #include "stih415-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> / { L2: cache-controller { @@ -83,5 +84,57 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; + + i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLKS_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@fed41000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed41000 0x110>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLKS_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@fe540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe540000 0x110>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c0_default>; + + status = "disabled"; + }; + + i2c@fe541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe541000 0x110>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c1_default>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 0f246c979262..b29ff4ba542c 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -97,6 +97,24 @@ }; }; }; + + sbc_i2c0 { + pinctrl_sbc_i2c0_default: sbc_i2c0-default { + st,pins { + sda = <&PIO4 6 ALT1 BIDIR>; + scl = <&PIO4 5 ALT1 BIDIR>; + }; + }; + }; + + sbc_i2c1 { + pinctrl_sbc_i2c1_default: sbc_i2c1-default { + st,pins { + sda = <&PIO3 2 ALT2 BIDIR>; + scl = <&PIO3 1 ALT2 BIDIR>; + }; + }; + }; }; pin-controller-front { @@ -175,6 +193,23 @@ }; }; + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&PIO9 3 ALT1 BIDIR>; + scl = <&PIO9 2 ALT1 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&PIO12 1 ALT1 BIDIR>; + scl = <&PIO12 0 ALT1 BIDIR>; + }; + }; + }; }; pin-controller-rear { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 1a0326ea7d07..b7ab47b95816 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,7 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> / { L2: cache-controller { compatible = "arm,pl310-cache"; @@ -92,5 +93,57 @@ pinctrl-0 = <&pinctrl_sbc_serial1>; clocks = <&CLK_SYSIN>; }; + + i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_S_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@fed41000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed41000 0x110>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_S_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@fe540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe540000 0x110>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c0_default>; + + status = "disabled"; + }; + + i2c@fe541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe541000 0x110>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c1_default>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index 8e694d2b8f5b..1e6aa92772f5 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -37,5 +37,14 @@ }; }; + /* HDMI Tx I2C */ + i2c@fed41000 { + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + i2c-min-scl-pulse-width-us = <0>; + i2c-min-sda-pulse-width-us = <5>; + + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 133e18143b1b..0ef0a69df8ea 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -38,5 +38,27 @@ default-state = "off"; }; }; + + i2c@fed40000 { + status = "okay"; + }; + + /* HDMI Tx I2C */ + i2c@fed41000 { + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + i2c-min-scl-pulse-width-us = <0>; + i2c-min-sda-pulse-width-us = <5>; + + status = "okay"; + }; + + i2c@fe540000 { + status = "okay"; + }; + + i2c@fe541000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index eb4d73b6a090..d4b081d6a167 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -18,10 +18,6 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; - aliases { - serial0 = &uart0; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 425a7db898c5..b139ee6bcf99 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -17,15 +17,6 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index b3ae51fa9372..3a1595f67823 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -18,10 +18,6 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 0c1447c68059..70b3323caf1a 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -18,10 +18,6 @@ model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { uart0: serial@01c28000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 319cc6b509da..040bb0eba152 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -15,6 +15,12 @@ / { interrupt-parent = <&intc>; + aliases { + ethernet0 = &emac; + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -66,6 +72,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -131,12 +160,11 @@ "apb0_ir1", "apb0_keypad"; }; - /* dummy is pll62 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -158,6 +186,126 @@ "apb1_uart4", "apb1_uart5", "apb1_uart6", "apb1_uart7"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; }; soc@01c00000 { @@ -266,11 +414,23 @@ reg = <0x01c20c90 0x10>; }; + rtc: rtc@01c20d00 { + compatible = "allwinner,sun4i-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index e674c94c7206..ea16054857a4 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -16,6 +16,10 @@ / { interrupt-parent = <&intc>; + aliases { + ethernet0 = &emac; + }; + cpus { cpu@0 { compatible = "arm,cortex-a8"; @@ -63,6 +67,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -123,12 +150,11 @@ "apb0_ir", "apb0_keypad"; }; - /* dummy is pll62 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -147,6 +173,102 @@ "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; }; soc@01c00000 { @@ -260,6 +382,12 @@ reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts new file mode 100644 index 000000000000..fe2ce0acdb06 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2012 Maxime Ripard + * Copyright 2013 Hans de Goede <hdegoede@redhat.com> + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" + +/ { + model = "Olimex A13-Olinuxino Micro"; + compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; + + soc@01c00000 { + pinctrl@01c20800 { + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinom>; + + power { + label = "a13-olinuxino-micro:green:power"; + gpios = <&pio 6 9 0>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 9e508dcc4245..a4ba5ff010cf 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -18,10 +18,6 @@ model = "Olimex A13-Olinuxino"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { pinctrl@01c20800 { led_pins_olinuxino: led_pins@0 { diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 1ccd75d37f49..320335abfccd 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -67,6 +67,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -125,12 +148,11 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - /* dummy is pll6 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -148,6 +170,102 @@ clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; }; soc@01c00000 { @@ -227,6 +345,12 @@ reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 7f5878c2784a..5256ad9be52c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -212,6 +212,24 @@ }; }; + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; @@ -235,6 +253,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; status = "disabled"; }; @@ -245,6 +264,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; status = "disabled"; }; @@ -255,6 +275,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; status = "disabled"; }; @@ -265,6 +286,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; status = "disabled"; }; @@ -275,6 +297,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; status = "disabled"; }; @@ -285,6 +308,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; + resets = <&apb2_rst 21>; status = "disabled"; }; @@ -298,5 +322,15 @@ #interrupt-cells = <3>; interrupts = <1 9 0xf04>; }; + + cpucfg@01f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + prcm@01f01c00 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8a1009d6c829..f9dcb61a5305 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -33,6 +33,24 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 0135039eff96..119f066f0d98 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -16,6 +16,10 @@ / { interrupt-parent = <&gic>; + aliases { + ethernet0 = &emac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -49,10 +53,11 @@ clock-frequency = <24000000>; }; - osc32k: osc32k { + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; + clock-output-names = "osc32k"; }; pll1: pll1@01c20000 { @@ -62,23 +67,34 @@ clocks = <&osc24M>; }; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - pll6: pll6 { + pll4: pll4@01c20018 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-cpu-clk"; reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; }; axi: axi@01c20054 { @@ -137,7 +153,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -159,6 +175,162 @@ "apb1_uart2", "apb1_uart3", "apb1_uart4", "apb1_uart5", "apb1_uart6", "apb1_uart7"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + /* + * Dummy clock used by output clocks + */ + osc24M_32k: clk@1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <750>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc24M_32k"; + }; + + clk_out_a: clk@01c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + + clk_out_b: clk@01c201f4 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f4 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_b"; + }; }; soc@01c00000 { @@ -246,6 +418,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -265,11 +451,23 @@ reg = <0x01c20c90 0x10>; }; + rtc: rtc@01c20d00 { + compatible = "allwinner,sun7i-a20-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <0 24 1>; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <0 29 4>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index cb5ec23b03a7..73aecfb57ccb 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -7,11 +7,42 @@ model = "NVIDIA Tegra114 Dalmore evaluation board"; compatible = "nvidia,dalmore", "nvidia,tegra114"; + aliases { + rtc0 = "/i2c@7000d000/tps65913@58"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x40000000>; }; - pinmux { + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&vdd_hdmi_reg>; + pll-supply = <&palmas_smps3_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + dsi@54300000 { + status = "okay"; + + panel@0 { + compatible = "panasonic,vvx10f004b00", + "simple-panel"; + reg = <0>; + + power-supply = <&avdd_lcd_reg>; + backlight = <&backlight>; + }; + }; + }; + + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -19,41 +50,41 @@ clk1_out_pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap1_din_pn1 { nvidia,pins = "dap1_din_pn1"; nvidia,function = "i2s0"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap1_dout_pn2 { nvidia,pins = "dap1_dout_pn2", "dap1_fs_pn0", "dap1_sclk_pn3"; nvidia,function = "i2s0"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_din_pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_dout_pa5 { nvidia,pins = "dap2_dout_pa5", "dap2_fs_pa2", "dap2_sclk_pa3"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap4_din_pp5 { nvidia,pins = "dap4_din_pp5", @@ -61,17 +92,17 @@ "dap4_fs_pp4", "dap4_sclk_pp7"; nvidia,function = "i2s3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dvfs_pwm_px0 { nvidia,pins = "dvfs_pwm_px0", "dvfs_clk_px2"; nvidia,function = "cldvfs"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_clk_py0 { nvidia,pins = "ulpi_clk_py0", @@ -84,128 +115,128 @@ "ulpi_data6_po7", "ulpi_data7_po0"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_dir_py1 { nvidia,pins = "ulpi_dir_py1", "ulpi_nxt_py2"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_stp_py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; cam_mclk_pcc0 { nvidia,pins = "cam_mclk_pcc0", "pbb0"; nvidia,function = "vi_alt3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; - nvidia,lock = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; }; gen2_i2c_scl_pt5 { nvidia,pins = "gen2_i2c_scl_pt5", "gen2_i2c_sda_pt6"; nvidia,function = "i2c2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; gmi_a16_pj7 { nvidia,pins = "gmi_a16_pj7"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_a17_pb0 { nvidia,pins = "gmi_a17_pb0", "gmi_a18_pb1"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_a19_pk7 { nvidia,pins = "gmi_a19_pk7"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad5_pg5 { nvidia,pins = "gmi_ad5_pg5", "gmi_cs6_n_pi3", "gmi_wr_n_pi0"; nvidia,function = "spi4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad6_pg6 { nvidia,pins = "gmi_ad6_pg6", "gmi_ad7_pg7"; nvidia,function = "spi4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad12_ph4 { nvidia,pins = "gmi_ad12_ph4"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad9_ph1 { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_cs1_n_pj2 { nvidia,pins = "gmi_cs1_n_pj2", "gmi_oe_n_pi1"; nvidia,function = "soc"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk2_out_pw5 { nvidia,pins = "clk2_out_pw5"; nvidia,function = "extperiph2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -214,23 +245,23 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_wp_n_pv3 { nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "spi4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -242,16 +273,16 @@ "sdmmc3_clk_lb_out_pee4", "sdmmc3_clk_lb_in_pee5"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc4_cmd_pt7 { nvidia,pins = "sdmmc4_cmd_pt7", @@ -264,16 +295,16 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "blink"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col0_pq0 { nvidia,pins = "kb_col0_pq0", @@ -283,265 +314,265 @@ "kb_row1_pr1", "kb_row2_pr2"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap3_din_pp1 { nvidia,pins = "dap3_din_pp1", "dap3_sclk_pp3"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row7_pr7 { nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row9_ps1 { nvidia,pins = "kb_row9_ps1"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pwr_i2c_scl_pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; sys_clk_req_pz5 { nvidia,pins = "sys_clk_req_pz5"; nvidia,function = "sysclk"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; core_pwr_req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; cpu_pwr_req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pwr_int_n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; reset_out_n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gen1_i2c_scl_pc4 { nvidia,pins = "gen1_i2c_scl_pc4", "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; uart2_cts_n_pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart2_rts_n_pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart2_rxd_pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart2_txd_pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart3_cts_n_pa1 { nvidia,pins = "uart3_cts_n_pa1", "uart3_rxd_pw7"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart3_rts_n_pc0 { nvidia,pins = "uart3_rts_n_pc0", "uart3_txd_pw6"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; owr { nvidia,pins = "owr"; nvidia,function = "owr"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; hdmi_cec_pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; ddc_scl_pv4 { nvidia,pins = "ddc_scl_pv4", "ddc_sda_pv5"; nvidia,function = "i2c4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,rcv-sel = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; }; spdif_in_pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "usb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; }; usb_vbus_en0_pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "usb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; gpio_x6_aud_px6 { nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi6"; - nvidia,pull = <2>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x4_aud_px4 { nvidia,pins = "gpio_x4_aud_px4", "gpio_x7_aud_px7"; nvidia,function = "rsvd1"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_x5_aud_px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "rsvd1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_w2_aud_pw2 { nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "rsvd2"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_w3_aud_pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x1_aud_px1 { nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x3_aud_px3 { nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap3_fs_pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap3_dout_pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pv1 { nvidia,pins = "pv1"; nvidia,function = "rsvd1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3", @@ -549,25 +580,25 @@ "pbb6", "pbb7"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pcc1 { nvidia,pins = "pcc1", "pcc2"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad0_pg0 { nvidia,pins = "gmi_ad0_pg0", "gmi_ad1_pg1"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad10_ph2 { nvidia,pins = "gmi_ad10_ph2", @@ -576,17 +607,17 @@ "gmi_ad8_ph0", "gmi_clk_pk1"; nvidia,function = "gmi"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad2_pg2 { nvidia,pins = "gmi_ad2_pg2", "gmi_ad3_pg3"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_adv_n_pk0 { nvidia,pins = "gmi_adv_n_pk0", @@ -598,39 +629,39 @@ "gmi_iordy_pi5", "gmi_wp_n_pc7"; nvidia,function = "gmi"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_cs3_n_pk4 { nvidia,pins = "gmi_cs3_n_pk4"; nvidia,function = "gmi"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; clk2_req_pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col3_pq3 { nvidia,pins = "kb_col3_pq3", "kb_col6_pq6", "kb_col7_pq7"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col5_pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row3_pr3 { nvidia,pins = "kb_row3_pr3", @@ -638,77 +669,77 @@ "kb_row6_pr6", "kb_row8_ps0"; nvidia,function = "kbc"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk3_req_pee1 { nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pu4 { nvidia,pins = "pu4"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pu5 { nvidia,pins = "pu5", "pu6"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk1_req_pee2 { nvidia,pins = "clk1_req_pee2", "usb_vbus_en1_pn5"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; - nvidia,slew-rate-rising = <2>; - nvidia,slew-rate-falling = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; }; drive_sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <22>; nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; drive_gma { nvidia,pins = "drive_gma"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <2>; nvidia,pull-up-strength = <1>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,drive-type = <1>; }; }; @@ -718,11 +749,15 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; - battery: smart-battery { + battery: smart-battery@b { compatible = "ti,bq20z45", "sbs,sbs-battery"; reg = <0xb>; battery-name = "battery"; @@ -731,7 +766,7 @@ power-supplies = <&charger>; }; - rt5640: rt5640 { + rt5640: rt5640@1c { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; @@ -749,11 +784,15 @@ }; }; + hdmi_ddc: i2c@7000c700 { + status = "okay"; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; - tps51632 { + tps51632@43 { compatible = "ti,tps51632"; reg = <0x43>; regulator-name = "vdd-cpu"; @@ -763,7 +802,7 @@ regulator-always-on; }; - tps65090 { + tps65090@48 { compatible = "ti,tps65090"; reg = <0x48>; interrupt-parent = <&gpio>; @@ -806,7 +845,7 @@ regulator-boot-on; }; - fet1 { + vdd_bl_reg: fet1 { regulator-name = "vdd-lcd-bl"; }; @@ -814,7 +853,7 @@ regulator-name = "vdd-modem-3v3"; }; - fet4 { + avdd_lcd_reg: fet4 { regulator-name = "avdd-lcd"; }; @@ -846,7 +885,7 @@ }; }; - palmas: tps65913 { + palmas: tps65913@58 { compatible = "ti,palmas"; reg = <0x58>; interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; @@ -1046,7 +1085,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -1057,7 +1096,7 @@ nvidia,sys-clock-req-active-high; }; - ahub { + ahub@70080000 { i2s@70080400 { status = "okay"; }; @@ -1084,12 +1123,23 @@ vbus-supply = <&usb3_vbus_reg>; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 1 1000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -1150,16 +1200,6 @@ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; - lcd_bl_en_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "lcd_bl_en"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - }; - usb1_vbus_reg: regulator@3 { compatible = "regulator-fixed"; reg = <3>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 731249fbe206..389e987ec281 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra114-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -15,7 +16,113 @@ serial3 = &uartd; }; - gic: interrupt-controller { + host1x@50000000 { + compatible = "nvidia,tegra114-host1x", "simple-bus"; + reg = <0x50000000 0x00028000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA114_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x01000000>; + + gr2d@54140000 { + compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d@54180000 { + compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; + }; + + dc@54200000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP1>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP2>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra114-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_HDMI>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + dsi@54300000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIA>, + <&tegra_car TEGRA114_CLK_DSIALP>, + <&tegra_car TEGRA114_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + dsi@54400000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54400000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIB>, + <&tegra_car TEGRA114_CLK_DSIBLP>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -39,14 +146,14 @@ clocks = <&tegra_car TEGRA114_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -87,12 +194,12 @@ #dma-cells = <1>; }; - ahb: ahb { + ahb: ahb@6000c004 { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -109,7 +216,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra114-pinmux"; reg = <0x70000868 0x148 /* Pad control registers */ 0x70003000 0x40c>; /* Mux registers */ @@ -175,7 +282,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -350,14 +457,14 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA114_CLK_RTC>; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -367,14 +474,14 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - iommu { + iommu@70019010 { compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; reg = <0x70019010 0x02c 0x700191f0 0x010 @@ -385,7 +492,7 @@ nvidia,ahb = <&ahb>; }; - ahub { + ahub@70080000 { compatible = "nvidia,tegra114-ahub"; reg = <0x70080000 0x200>, <0x70080200 0x100>, @@ -479,6 +586,13 @@ }; }; + mipi: mipi@700e3000 { + compatible = "nvidia,tegra114-mipi"; + reg = <0x700e3000 0x100>; + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; + #nvidia,mipi-calibrate-cells = <1>; + }; + sdhci@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 431d67a2b413..c6dcef513e5d 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1,19 +1,917 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra124.dtsi" / { model = "NVIDIA Tegra124 Venice2"; compatible = "nvidia,venice2", "nvidia,tegra124"; + aliases { + rtc0 = "/i2c@7000d000/as3722@40"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x80000000>; }; + pinmux: pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + pj7 { + nvidia,pins = "pj7", + "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pb0 { + nvidia,pins = "pb0", + "pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <32>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <20>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <1>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + als_irq_l { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_l { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hp_det_l { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + serial@70006000 { status = "okay"; }; + pwm: pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + as3722: as3722@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_ac_bat_reg>; + vsup-sd3-supply = <&vdd_ac_bat_reg>; + vsup-sd4-supply = <&vdd_ac_bat_reg>; + vsup-sd5-supply = <&vdd_ac_bat_reg>; + vin-ldo0-supply = <&as3722_sd2>; + vin-ldo1-6-supply = <&vdd_ac_bat_reg>; + vin-ldo2-5-7-supply = <&as3722_sd5>; + vin-ldo3-4-supply = <&vdd_ac_bat_reg>; + vin-ldo9-10-supply = <&vdd_ac_bat_reg>; + vin-ldo11-supply = <&vdd_ac_bat_reg>; + + sd0 { + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <2>; + }; + + sd1 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <1>; + }; + + as3722_sd2: sd2 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "vddio-ddr-2phase"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "avdd-pex-sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + }; + + as3722_sd5: sd5 { + regulator-name = "vddio-sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "vdd-gpu"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,external-control = <1>; + }; + + ldo1 { + regulator-name = "run-cam-1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "gen-avdd,vddio-hsic"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "vdd-cam"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd-cam-front"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7 { + regulator-name = "vdd-cam-rear"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "vdd-touch"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "vdd-cam-af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@7000d400 { + status = "okay"; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) + MATRIX_KEY(0x00, 0x02, KEY_F1) + MATRIX_KEY(0x00, 0x03, KEY_B) + MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x06, KEY_N) + MATRIX_KEY(0x00, 0x08, KEY_EQUAL) + MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) + + MATRIX_KEY(0x01, 0x01, KEY_ESC) + MATRIX_KEY(0x01, 0x02, KEY_F4) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_F7) + MATRIX_KEY(0x01, 0x06, KEY_H) + MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) + MATRIX_KEY(0x01, 0x09, KEY_F9) + MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + + MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) + MATRIX_KEY(0x02, 0x01, KEY_TAB) + MATRIX_KEY(0x02, 0x02, KEY_F3) + MATRIX_KEY(0x02, 0x03, KEY_T) + MATRIX_KEY(0x02, 0x04, KEY_F6) + MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) + MATRIX_KEY(0x02, 0x06, KEY_Y) + MATRIX_KEY(0x02, 0x07, KEY_102ND) + MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) + MATRIX_KEY(0x02, 0x09, KEY_F8) + + MATRIX_KEY(0x03, 0x01, KEY_GRAVE) + MATRIX_KEY(0x03, 0x02, KEY_F2) + MATRIX_KEY(0x03, 0x03, KEY_5) + MATRIX_KEY(0x03, 0x04, KEY_F5) + MATRIX_KEY(0x03, 0x06, KEY_6) + MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x04, 0x02, KEY_D) + MATRIX_KEY(0x04, 0x03, KEY_F) + MATRIX_KEY(0x04, 0x04, KEY_S) + MATRIX_KEY(0x04, 0x05, KEY_K) + MATRIX_KEY(0x04, 0x06, KEY_J) + MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) + MATRIX_KEY(0x04, 0x09, KEY_L) + MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) + MATRIX_KEY(0x04, 0x0b, KEY_ENTER) + + MATRIX_KEY(0x05, 0x01, KEY_Z) + MATRIX_KEY(0x05, 0x02, KEY_C) + MATRIX_KEY(0x05, 0x03, KEY_V) + MATRIX_KEY(0x05, 0x04, KEY_X) + MATRIX_KEY(0x05, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x06, KEY_M) + MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) + MATRIX_KEY(0x05, 0x08, KEY_SLASH) + MATRIX_KEY(0x05, 0x09, KEY_DOT) + MATRIX_KEY(0x05, 0x0b, KEY_SPACE) + + MATRIX_KEY(0x06, 0x01, KEY_1) + MATRIX_KEY(0x06, 0x02, KEY_3) + MATRIX_KEY(0x06, 0x03, KEY_4) + MATRIX_KEY(0x06, 0x04, KEY_2) + MATRIX_KEY(0x06, 0x05, KEY_8) + MATRIX_KEY(0x06, 0x06, KEY_7) + MATRIX_KEY(0x06, 0x08, KEY_0) + MATRIX_KEY(0x06, 0x09, KEY_9) + MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) + MATRIX_KEY(0x06, 0x0b, KEY_DOWN) + MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) + + MATRIX_KEY(0x07, 0x01, KEY_Q) + MATRIX_KEY(0x07, 0x02, KEY_E) + MATRIX_KEY(0x07, 0x03, KEY_R) + MATRIX_KEY(0x07, 0x04, KEY_W) + MATRIX_KEY(0x07, 0x05, KEY_I) + MATRIX_KEY(0x07, 0x06, KEY_U) + MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) + MATRIX_KEY(0x07, 0x08, KEY_P) + MATRIX_KEY(0x07, 0x09, KEY_O) + MATRIX_KEY(0x07, 0x0b, KEY_UP) + MATRIX_KEY(0x07, 0x0c, KEY_LEFT) + >; + }; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -24,4 +922,170 @@ nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; }; + + sdhci@700b0400 { + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + status = "okay"; + bus-width = <4>; + }; + + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + }; + + ahub@70300000 { + i2s@70301100 { + status = "okay"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + }; + + vdd_3v3_modem_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd-modem-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_hdmi_5v0_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd-hdmi-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + }; + + vdd_bl_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd-bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>; + }; + + vdd_ts_sw_5v0: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_ts_sw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>; + }; + + usb1_vbus_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + usb3_vbus_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + panel_3v3_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-venice2", + "nvidia,tegra-audio-max98090"; + nvidia,model = "NVIDIA Tegra Venice2"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index b7413004ee77..ec0698a8354a 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1,4 +1,6 @@ +#include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -28,6 +30,14 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TIMER>; + }; + + tegra_car: clock@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; }; gpio: gpio@6000d000 { @@ -47,6 +57,53 @@ interrupt-controller; }; + apbdma: dma@60020000 { + compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x60020000 0x1400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_APBDMA>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + pinmux: pinmux@70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164>, /* Pad control registers */ + <0x70003000 0x434>; /* Mux registers */ + }; + /* * There are two serial driver i.e. 8250 based simple serial * driver and APB DMA based serial driver for higher baudrate @@ -60,6 +117,11 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -68,6 +130,11 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTB>; + resets = <&tegra_car 7>; + reset-names = "serial"; + dmas = <&apbdma 9>, <&apbdma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -76,6 +143,11 @@ reg = <0x70006200 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTC>; + resets = <&tegra_car 55>; + reset-names = "serial"; + dmas = <&apbdma 10>, <&apbdma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -84,6 +156,11 @@ reg = <0x70006300 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTD>; + resets = <&tegra_car 65>; + reset-names = "serial"; + dmas = <&apbdma 19>, <&apbdma 19>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -92,6 +169,201 @@ reg = <0x70006400 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTE>; + resets = <&tegra_car 66>; + reset-names = "serial"; + dmas = <&apbdma 20>, <&apbdma 20>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm@7000a000 { + compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA124_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d100 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d100 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&tegra_car 166>; + reset-names = "i2c"; + dmas = <&apbdma 30>, <&apbdma 30>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC1>; + clock-names = "spi"; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC2>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC3>; + clock-names = "spi"; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC4>; + clock-names = "spi"; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC5>; + clock-names = "spi"; + resets = <&tegra_car 104>; + reset-names = "spi"; + dmas = <&apbdma 27>, <&apbdma 27>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC6>; + clock-names = "spi"; + resets = <&tegra_car 105>; + reset-names = "spi"; + dmas = <&apbdma 28>, <&apbdma 28>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -99,11 +371,157 @@ compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_RTC>; }; pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + sdhci@700b0000 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0000 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0200 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0200 0x200>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0400 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0400 0x200>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0600 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0600 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disable"; + }; + + ahub@70300000 { + compatible = "nvidia,tegra124-ahub"; + reg = <0x70300000 0x200>, + <0x70300800 0x800>, + <0x70300200 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>, + <&tegra_car TEGRA124_CLK_APBIF>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, /* d_audio */ + <&tegra_car 107>, /* apbif */ + <&tegra_car 30>, /* i2s0 */ + <&tegra_car 11>, /* i2s1 */ + <&tegra_car 18>, /* i2s2 */ + <&tegra_car 101>, /* i2s3 */ + <&tegra_car 102>, /* i2s4 */ + <&tegra_car 108>, /* dam0 */ + <&tegra_car 109>, /* dam1 */ + <&tegra_car 110>, /* dam2 */ + <&tegra_car 10>, /* spdif */ + <&tegra_car 153>, /* amx */ + <&tegra_car 185>, /* amx1 */ + <&tegra_car 154>, /* adx */ + <&tegra_car 180>, /* adx1 */ + <&tegra_car 186>, /* afc0 */ + <&tegra_car 187>, /* afc1 */ + <&tegra_car 188>, /* afc2 */ + <&tegra_car 189>, /* afc3 */ + <&tegra_car 190>, /* afc4 */ + <&tegra_car 191>; /* afc5 */ + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif", "amx", "amx1", "adx", "adx1", + "afc0", "afc1", "afc2", "afc3", "afc4", "afc5"; + dmas = <&apbdma 1>, <&apbdma 1>, + <&apbdma 2>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 3>, + <&apbdma 4>, <&apbdma 4>, + <&apbdma 6>, <&apbdma 6>, + <&apbdma 7>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 12>, + <&apbdma 13>, <&apbdma 13>, + <&apbdma 14>, <&apbdma 14>, + <&apbdma 29>, <&apbdma 29>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", + "rx3", "tx3", "rx4", "tx4", "rx5", "tx5", + "rx6", "tx6", "rx7", "tx7", "rx8", "tx8", + "rx9", "tx9"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70301000 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301000 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA124_CLK_I2S0>; + resets = <&tegra_car 30>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s1: i2s@70301100 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301100 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA124_CLK_I2S1>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s2: i2s@70301200 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301200 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA124_CLK_I2S2>; + resets = <&tegra_car 18>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s3: i2s@70301300 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301300 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA124_CLK_I2S3>; + resets = <&tegra_car 101>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s4: i2s@70301400 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301400 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA124_CLK_I2S4>; + resets = <&tegra_car 102>; + reset-names = "i2s"; + status = "disabled"; + }; }; cpus { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index cbe89ff10686..8e0066ad9628 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -4,12 +4,17 @@ model = "Toradex Colibri T20 512MB"; compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -19,7 +24,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -27,20 +32,20 @@ audio_refclk { nvidia,pins = "cdev1"; nvidia,function = "plla_out"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; crt { nvidia,pins = "crtp"; nvidia,function = "crt"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; dap3 { nvidia,pins = "dap3"; nvidia,function = "dap3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; displaya { nvidia,pins = "ld0", "ld1", "ld2", "ld3", @@ -50,155 +55,163 @@ "lhs", "lpw0", "lpw2", "lsc0", "lsc1", "lsck", "lsda", "lspi", "lvs"; nvidia,function = "displaya"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; gpio_dte { nvidia,pins = "dte"; nvidia,function = "rsvd1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_gmi { nvidia,pins = "ata", "atc", "atd", "ate", "dap1", "dap2", "dap4", "gpu", "irrx", "irtx", "spia", "spib", "spic"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_pta { nvidia,pins = "pta"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_uac { nvidia,pins = "uac"; nvidia,function = "rsvd2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; hdint { nvidia,pins = "hdint"; nvidia,function = "hdmi"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2c1 { nvidia,pins = "rm"; nvidia,function = "i2c1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2c3 { nvidia,pins = "dtf"; nvidia,function = "i2c3"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2cddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2cp { nvidia,pins = "i2cp"; nvidia,function = "i2cp"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; irda { nvidia,pins = "uad"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; nand { nvidia,pins = "kbca", "kbcc", "kbcd", "kbce", "kbcf"; nvidia,function = "nand"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; owc { nvidia,pins = "owc"; nvidia,function = "owr"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; pwm { nvidia,pins = "sdb", "sdc", "sdd"; nvidia,function = "pwm"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; sdio4 { nvidia,pins = "atb", "gma", "gme"; nvidia,function = "sdio4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; spi1 { nvidia,pins = "spid", "spie", "spif"; nvidia,function = "spi1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; spi4 { nvidia,pins = "slxa", "slxc", "slxd", "slxk"; nvidia,function = "spi4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; uarta { nvidia,pins = "sdio1"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; uartd { nvidia,pins = "gmc"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; ulpi { nvidia,pins = "uaa", "uab", "uda"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; ulpi_refclk { nvidia,pins = "cdev2"; nvidia,function = "pllp_out4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; usb_gpio { nvidia,pins = "spig", "spih"; nvidia,function = "spi2_alt"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; vi { nvidia,pins = "dta", "dtb", "dtc", "dtd"; nvidia,function = "vi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; vi_sc { nvidia,pins = "csus"; nvidia,function = "vi_sensor_clk"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; }; }; + ac97: ac97@70002000 { + status = "okay"; + nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) + GPIO_ACTIVE_HIGH>; + }; + i2c@7000c000 { clock-frequency = <400000>; }; @@ -225,15 +238,15 @@ #gpio-cells = <2>; gpio-controller; - sys-supply = <&vdd_5v0_reg>; + sys-supply = <&vdd_3v3_reg>; vin-sm0-supply = <&sys_reg>; vin-sm1-supply = <&sys_reg>; vin-sm2-supply = <&sys_reg>; vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&sm2_reg>; - vinldo4-supply = <&sm2_reg>; - vinldo678-supply = <&sm2_reg>; - vinldo9-supply = <&sm2_reg>; + vinldo23-supply = <&vdd_3v3_reg>; + vinldo4-supply = <&vdd_3v3_reg>; + vinldo678-supply = <&vdd_3v3_reg>; + vinldo9-supply = <&vdd_3v3_reg>; regulators { #address-cells = <1>; @@ -250,8 +263,8 @@ reg = <1>; regulator-compatible = "sm0"; regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1275000>; - regulator-max-microvolt = <1275000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; @@ -259,8 +272,8 @@ reg = <2>; regulator-compatible = "sm1"; regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; @@ -316,8 +329,8 @@ reg = <10>; regulator-compatible = "ldo6"; regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; }; hdmi_vdd_reg: regulator@11 { @@ -362,7 +375,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; @@ -442,14 +455,6 @@ }; }; - ac97: ac97 { - status = "okay"; - nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) - GPIO_ACTIVE_HIGH>; - nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) - GPIO_ACTIVE_HIGH>; - }; - usb@c5004000 { status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) @@ -471,7 +476,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -479,37 +484,17 @@ }; }; - sound { - compatible = "nvidia,tegra-audio-wm9712-colibri_t20", - "nvidia,tegra-audio-wm9712"; - nvidia,model = "Colibri T20 AC97 Audio"; - - nvidia,audio-routing = - "Headphone", "HPOUTL", - "Headphone", "HPOUTR", - "LineIn", "LINEINL", - "LineIn", "LINEINR", - "Mic", "MIC1"; - - nvidia,ac97-controller = <&ac97>; - - clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - vdd_5v0_reg: regulator@100 { + vdd_3v3_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -525,4 +510,24 @@ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Colibri T20 AC97 Audio"; + + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + + nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index e156ab30e763..3fb1f50f6d46 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -1,17 +1,31 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +37,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -184,50 +198,50 @@ "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dta", "dtd", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "sdd", "spic", "spie", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -237,12 +251,12 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; }; @@ -255,6 +269,10 @@ status = "okay"; }; + pwm: pwm@7000a000 { + status = "okay"; + }; + i2c@7000c000 { status = "okay"; clock-frequency = <400000>; @@ -415,7 +433,124 @@ }; }; - pmc { + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <2>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W) + MATRIX_KEY(0x00, 0x03, KEY_S) + MATRIX_KEY(0x00, 0x04, KEY_A) + MATRIX_KEY(0x00, 0x05, KEY_Z) + MATRIX_KEY(0x00, 0x07, KEY_FN) + MATRIX_KEY(0x01, 0x07, KEY_MENU) + MATRIX_KEY(0x02, 0x06, KEY_LEFTALT) + MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT) + MATRIX_KEY(0x03, 0x00, KEY_5) + MATRIX_KEY(0x03, 0x01, KEY_4) + MATRIX_KEY(0x03, 0x02, KEY_R) + MATRIX_KEY(0x03, 0x03, KEY_E) + MATRIX_KEY(0x03, 0x04, KEY_F) + MATRIX_KEY(0x03, 0x05, KEY_D) + MATRIX_KEY(0x03, 0x06, KEY_X) + MATRIX_KEY(0x04, 0x00, KEY_7) + MATRIX_KEY(0x04, 0x01, KEY_6) + MATRIX_KEY(0x04, 0x02, KEY_T) + MATRIX_KEY(0x04, 0x03, KEY_H) + MATRIX_KEY(0x04, 0x04, KEY_G) + MATRIX_KEY(0x04, 0x05, KEY_V) + MATRIX_KEY(0x04, 0x06, KEY_C) + MATRIX_KEY(0x04, 0x07, KEY_SPACE) + MATRIX_KEY(0x05, 0x00, KEY_9) + MATRIX_KEY(0x05, 0x01, KEY_8) + MATRIX_KEY(0x05, 0x02, KEY_U) + MATRIX_KEY(0x05, 0x03, KEY_Y) + MATRIX_KEY(0x05, 0x04, KEY_J) + MATRIX_KEY(0x05, 0x05, KEY_N) + MATRIX_KEY(0x05, 0x06, KEY_B) + MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH) + MATRIX_KEY(0x06, 0x00, KEY_MINUS) + MATRIX_KEY(0x06, 0x01, KEY_0) + MATRIX_KEY(0x06, 0x02, KEY_O) + MATRIX_KEY(0x06, 0x03, KEY_I) + MATRIX_KEY(0x06, 0x04, KEY_L) + MATRIX_KEY(0x06, 0x05, KEY_K) + MATRIX_KEY(0x06, 0x06, KEY_COMMA) + MATRIX_KEY(0x06, 0x07, KEY_M) + MATRIX_KEY(0x07, 0x01, KEY_EQUAL) + MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE) + MATRIX_KEY(0x07, 0x03, KEY_ENTER) + MATRIX_KEY(0x07, 0x07, KEY_MENU) + MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT) + MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT) + MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL) + MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL) + MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE) + MATRIX_KEY(0x0B, 0x01, KEY_P) + MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE) + MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON) + MATRIX_KEY(0x0B, 0x04, KEY_SLASH) + MATRIX_KEY(0x0B, 0x05, KEY_DOT) + MATRIX_KEY(0x0C, 0x00, KEY_F10) + MATRIX_KEY(0x0C, 0x01, KEY_F9) + MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE) + MATRIX_KEY(0x0C, 0x03, KEY_3) + MATRIX_KEY(0x0C, 0x04, KEY_2) + MATRIX_KEY(0x0C, 0x05, KEY_UP) + MATRIX_KEY(0x0C, 0x06, KEY_PRINT) + MATRIX_KEY(0x0C, 0x07, KEY_PAUSE) + MATRIX_KEY(0x0D, 0x00, KEY_INSERT) + MATRIX_KEY(0x0D, 0x01, KEY_DELETE) + MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP ) + MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN) + MATRIX_KEY(0x0D, 0x05, KEY_RIGHT) + MATRIX_KEY(0x0D, 0x06, KEY_DOWN) + MATRIX_KEY(0x0D, 0x07, KEY_LEFT) + MATRIX_KEY(0x0E, 0x00, KEY_F11) + MATRIX_KEY(0x0E, 0x01, KEY_F12) + MATRIX_KEY(0x0E, 0x02, KEY_F8) + MATRIX_KEY(0x0E, 0x03, KEY_Q) + MATRIX_KEY(0x0E, 0x04, KEY_F4) + MATRIX_KEY(0x0E, 0x05, KEY_F3) + MATRIX_KEY(0x0E, 0x06, KEY_1) + MATRIX_KEY(0x0E, 0x07, KEY_F7) + MATRIX_KEY(0x0F, 0x00, KEY_ESC) + MATRIX_KEY(0x0F, 0x01, KEY_GRAVE) + MATRIX_KEY(0x0F, 0x02, KEY_F5) + MATRIX_KEY(0x0F, 0x03, KEY_TAB) + MATRIX_KEY(0x0F, 0x04, KEY_F1) + MATRIX_KEY(0x0F, 0x05, KEY_F2) + MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK) + MATRIX_KEY(0x0F, 0x07, KEY_F6) + MATRIX_KEY(0x14, 0x00, KEY_KP7) + MATRIX_KEY(0x15, 0x00, KEY_KP9) + MATRIX_KEY(0x15, 0x01, KEY_KP8) + MATRIX_KEY(0x15, 0x02, KEY_KP4) + MATRIX_KEY(0x15, 0x04, KEY_KP1) + MATRIX_KEY(0x16, 0x01, KEY_KPSLASH) + MATRIX_KEY(0x16, 0x02, KEY_KP6) + MATRIX_KEY(0x16, 0x03, KEY_KP5) + MATRIX_KEY(0x16, 0x04, KEY_KP3) + MATRIX_KEY(0x16, 0x05, KEY_KP2) + MATRIX_KEY(0x16, 0x07, KEY_KP0) + MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK) + MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS) + MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS) + MATRIX_KEY(0x1B, 0x05, KEY_KPDOT) + MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP) + MATRIX_KEY(0x1D, 0x03, KEY_HOME) + MATRIX_KEY(0x1D, 0x04, KEY_END) + MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN) + MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK) + MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK) + MATRIX_KEY(0x1E, 0x02, KEY_MUTE) + MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>; + }; + + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -425,7 +560,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; status = "okay"; @@ -483,12 +618,23 @@ bus-width = <8>; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -502,126 +648,18 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <2>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; - linux,keymap = <0x00020011 /* KEY_W */ - 0x0003001F /* KEY_S */ - 0x0004001E /* KEY_A */ - 0x0005002C /* KEY_Z */ - 0x000701D0 /* KEY_FN */ - 0x0107008B /* KEY_MENU */ - 0x02060038 /* KEY_LEFTALT */ - 0x02070064 /* KEY_RIGHTALT */ - 0x03000006 /* KEY_5 */ - 0x03010005 /* KEY_4 */ - 0x03020013 /* KEY_R */ - 0x03030012 /* KEY_E */ - 0x03040021 /* KEY_F */ - 0x03050020 /* KEY_D */ - 0x0306002D /* KEY_X */ - 0x04000008 /* KEY_7 */ - 0x04010007 /* KEY_6 */ - 0x04020014 /* KEY_T */ - 0x04030023 /* KEY_H */ - 0x04040022 /* KEY_G */ - 0x0405002F /* KEY_V */ - 0x0406002E /* KEY_C */ - 0x04070039 /* KEY_SPACE */ - 0x0500000A /* KEY_9 */ - 0x05010009 /* KEY_8 */ - 0x05020016 /* KEY_U */ - 0x05030015 /* KEY_Y */ - 0x05040024 /* KEY_J */ - 0x05050031 /* KEY_N */ - 0x05060030 /* KEY_B */ - 0x0507002B /* KEY_BACKSLASH */ - 0x0600000C /* KEY_MINUS */ - 0x0601000B /* KEY_0 */ - 0x06020018 /* KEY_O */ - 0x06030017 /* KEY_I */ - 0x06040026 /* KEY_L */ - 0x06050025 /* KEY_K */ - 0x06060033 /* KEY_COMMA */ - 0x06070032 /* KEY_M */ - 0x0701000D /* KEY_EQUAL */ - 0x0702001B /* KEY_RIGHTBRACE */ - 0x0703001C /* KEY_ENTER */ - 0x0707008B /* KEY_MENU */ - 0x0804002A /* KEY_LEFTSHIFT */ - 0x08050036 /* KEY_RIGHTSHIFT */ - 0x0905001D /* KEY_LEFTCTRL */ - 0x09070061 /* KEY_RIGHTCTRL */ - 0x0B00001A /* KEY_LEFTBRACE */ - 0x0B010019 /* KEY_P */ - 0x0B020028 /* KEY_APOSTROPHE */ - 0x0B030027 /* KEY_SEMICOLON */ - 0x0B040035 /* KEY_SLASH */ - 0x0B050034 /* KEY_DOT */ - 0x0C000044 /* KEY_F10 */ - 0x0C010043 /* KEY_F9 */ - 0x0C02000E /* KEY_BACKSPACE */ - 0x0C030004 /* KEY_3 */ - 0x0C040003 /* KEY_2 */ - 0x0C050067 /* KEY_UP */ - 0x0C0600D2 /* KEY_PRINT */ - 0x0C070077 /* KEY_PAUSE */ - 0x0D00006E /* KEY_INSERT */ - 0x0D01006F /* KEY_DELETE */ - 0x0D030068 /* KEY_PAGEUP */ - 0x0D04006D /* KEY_PAGEDOWN */ - 0x0D05006A /* KEY_RIGHT */ - 0x0D06006C /* KEY_DOWN */ - 0x0D070069 /* KEY_LEFT */ - 0x0E000057 /* KEY_F11 */ - 0x0E010058 /* KEY_F12 */ - 0x0E020042 /* KEY_F8 */ - 0x0E030010 /* KEY_Q */ - 0x0E04003E /* KEY_F4 */ - 0x0E05003D /* KEY_F3 */ - 0x0E060002 /* KEY_1 */ - 0x0E070041 /* KEY_F7 */ - 0x0F000001 /* KEY_ESC */ - 0x0F010029 /* KEY_GRAVE */ - 0x0F02003F /* KEY_F5 */ - 0x0F03000F /* KEY_TAB */ - 0x0F04003B /* KEY_F1 */ - 0x0F05003C /* KEY_F2 */ - 0x0F06003A /* KEY_CAPSLOCK */ - 0x0F070040 /* KEY_F6 */ - 0x14000047 /* KEY_KP7 */ - 0x15000049 /* KEY_KP9 */ - 0x15010048 /* KEY_KP8 */ - 0x1502004B /* KEY_KP4 */ - 0x1504004F /* KEY_KP1 */ - 0x1601004E /* KEY_KPSLASH */ - 0x1602004D /* KEY_KP6 */ - 0x1603004C /* KEY_KP5 */ - 0x16040051 /* KEY_KP3 */ - 0x16050050 /* KEY_KP2 */ - 0x16070052 /* KEY_KP0 */ - 0x1B010037 /* KEY_KPASTERISK */ - 0x1B03004A /* KEY_KPMINUS */ - 0x1B04004E /* KEY_KPPLUS */ - 0x1B050053 /* KEY_KPDOT */ - 0x1C050073 /* KEY_VOLUMEUP */ - 0x1D030066 /* KEY_HOME */ - 0x1D04006B /* KEY_END */ - 0x1D0500E1 /* KEY_BRIGHTNESSUP */ - 0x1D060072 /* KEY_VOLUMEDOWN */ - 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */ - 0x1E000045 /* KEY_NUMLOCK */ - 0x1E010046 /* KEY_SCROLLLOCK */ - 0x1E020071 /* KEY_MUTE */ - 0x1F0400D6>; /* KEY_QUESTION */ + panel: panel { + compatible = "auo,b101aw03", "simple-panel"; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; }; regulators { @@ -667,7 +705,7 @@ enable-active-high; }; - regulator@4 { + vdd_pnl_reg: regulator@4 { compatible = "regulator-fixed"; reg = <4>; regulator-name = "vdd_pnl"; @@ -677,7 +715,7 @@ enable-active-high; }; - regulator@5 { + vdd_bl_reg: regulator@5 { compatible = "regulator-fixed"; reg = <5>; regulator-name = "vdd_bl"; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index f2222bd74eab..8cfb83f42e1f 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -6,61 +6,61 @@ model = "Toradex Colibri T20 512MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; - pinmux { + pinmux@70000014 { state_default: pinmux { hdint { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; i2cddc { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdio4 { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; uarta { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; uartd { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; - usb@c5000000 { + serial@70006000 { status = "okay"; }; - usb-phy@c5000000 { + serial@70006300 { status = "okay"; }; - usb@c5008000 { + i2c_ddc: i2c@7000c400 { status = "okay"; }; - usb-phy@c5008000 { + usb@c5000000 { status = "okay"; }; - serial@70006000 { + usb-phy@c5000000 { status = "okay"; }; - serial@70006300 { + usb@c5008000 { status = "okay"; }; - i2c_ddc: i2c@7000c400 { + usb-phy@c5008000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 7580578903cf..6d3a4cbc36cc 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,7 +6,7 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; - pwm { + pwm@7000a000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index e57fb3aefc2a..c7cd8e6802d7 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; compatible = "compal,paz00", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -177,39 +183,39 @@ "gpu", "gpu7", "gpv", "i2cp", "pta", "rm", "sdio1", "slxk", "spdo", "uac", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "dap3", "dap4", "dtb", "dtc", "dte", "slxa", "slxc", "slxd", "spdi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_csus { nvidia,pins = "csus", "spia", "spib", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "irrx", "irtx", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "spic", "spig", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dta { nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd", "spie", "spih", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "ld0", "ld1", "ld2", @@ -218,23 +224,23 @@ "ld13", "ld14", "ld15", "ld16", "ld17", "ldc", "ldi", "lhs", "lsc0", "lspi", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_lcsn { nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2", "lm0", "lm1", "lpp", "lpw0", "lpw1", "lpw2", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "lvp1", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; }; @@ -268,7 +274,7 @@ clock-frequency = <100000>; }; - nvec { + nvec@7000c500 { compatible = "nvidia,nvec"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -417,7 +423,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -474,7 +480,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -488,7 +494,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index d7a358a6a647..29051a2ae0ae 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -6,8 +6,8 @@ model = "Avionic Design Plutux board"; compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 315aae26c3cd..a11b6e7b4759 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; compatible = "nvidia,seaboard", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,53 +195,53 @@ "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", "uad", "uca", "ucb", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ate { nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "gmb", "slxa", "spia", "spig", "spih"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dte { nvidia,pins = "dte", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_kbca { nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdio1", "spic", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -245,22 +251,22 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <31>; nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <3>; - nvidia,slew-rate-falling = <3>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; }; @@ -386,6 +392,13 @@ status = "okay"; clock-frequency = <400000>; + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0xc>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; + }; + pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; @@ -507,16 +520,149 @@ compatible = "onnn,nct1008"; reg = <0x4c>; }; + }; - magnetometer@c { - compatible = "ak,ak8975"; - reg = <0xc>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; - }; + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <32>; + nvidia,repeat-delay-ms = <160>; + nvidia,ghost-filter; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W) + MATRIX_KEY(0x00, 0x03, KEY_S) + MATRIX_KEY(0x00, 0x04, KEY_A) + MATRIX_KEY(0x00, 0x05, KEY_Z) + MATRIX_KEY(0x00, 0x07, KEY_FN) + + MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA) + MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT) + MATRIX_KEY(0x02, 0x07, KEY_LEFTALT) + + MATRIX_KEY(0x03, 0x00, KEY_5) + MATRIX_KEY(0x03, 0x01, KEY_4) + MATRIX_KEY(0x03, 0x02, KEY_R) + MATRIX_KEY(0x03, 0x03, KEY_E) + MATRIX_KEY(0x03, 0x04, KEY_F) + MATRIX_KEY(0x03, 0x05, KEY_D) + MATRIX_KEY(0x03, 0x06, KEY_X) + + MATRIX_KEY(0x04, 0x00, KEY_7) + MATRIX_KEY(0x04, 0x01, KEY_6) + MATRIX_KEY(0x04, 0x02, KEY_T) + MATRIX_KEY(0x04, 0x03, KEY_H) + MATRIX_KEY(0x04, 0x04, KEY_G) + MATRIX_KEY(0x04, 0x05, KEY_V) + MATRIX_KEY(0x04, 0x06, KEY_C) + MATRIX_KEY(0x04, 0x07, KEY_SPACE) + + MATRIX_KEY(0x05, 0x00, KEY_9) + MATRIX_KEY(0x05, 0x01, KEY_8) + MATRIX_KEY(0x05, 0x02, KEY_U) + MATRIX_KEY(0x05, 0x03, KEY_Y) + MATRIX_KEY(0x05, 0x04, KEY_J) + MATRIX_KEY(0x05, 0x05, KEY_N) + MATRIX_KEY(0x05, 0x06, KEY_B) + MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH) + + MATRIX_KEY(0x06, 0x00, KEY_MINUS) + MATRIX_KEY(0x06, 0x01, KEY_0) + MATRIX_KEY(0x06, 0x02, KEY_O) + MATRIX_KEY(0x06, 0x03, KEY_I) + MATRIX_KEY(0x06, 0x04, KEY_L) + MATRIX_KEY(0x06, 0x05, KEY_K) + MATRIX_KEY(0x06, 0x06, KEY_COMMA) + MATRIX_KEY(0x06, 0x07, KEY_M) + + MATRIX_KEY(0x07, 0x01, KEY_EQUAL) + MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE) + MATRIX_KEY(0x07, 0x03, KEY_ENTER) + MATRIX_KEY(0x07, 0x07, KEY_MENU) + + MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT) + MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT) + + MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL) + MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL) + + MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE) + MATRIX_KEY(0x0B, 0x01, KEY_P) + MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE) + MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON) + MATRIX_KEY(0x0B, 0x04, KEY_SLASH) + MATRIX_KEY(0x0B, 0x05, KEY_DOT) + + MATRIX_KEY(0x0C, 0x00, KEY_F10) + MATRIX_KEY(0x0C, 0x01, KEY_F9) + MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE) + MATRIX_KEY(0x0C, 0x03, KEY_3) + MATRIX_KEY(0x0C, 0x04, KEY_2) + MATRIX_KEY(0x0C, 0x05, KEY_UP) + MATRIX_KEY(0x0C, 0x06, KEY_PRINT) + MATRIX_KEY(0x0C, 0x07, KEY_PAUSE) + + MATRIX_KEY(0x0D, 0x00, KEY_INSERT) + MATRIX_KEY(0x0D, 0x01, KEY_DELETE) + MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP ) + MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN) + MATRIX_KEY(0x0D, 0x05, KEY_RIGHT) + MATRIX_KEY(0x0D, 0x06, KEY_DOWN) + MATRIX_KEY(0x0D, 0x07, KEY_LEFT) + + MATRIX_KEY(0x0E, 0x00, KEY_F11) + MATRIX_KEY(0x0E, 0x01, KEY_F12) + MATRIX_KEY(0x0E, 0x02, KEY_F8) + MATRIX_KEY(0x0E, 0x03, KEY_Q) + MATRIX_KEY(0x0E, 0x04, KEY_F4) + MATRIX_KEY(0x0E, 0x05, KEY_F3) + MATRIX_KEY(0x0E, 0x06, KEY_1) + MATRIX_KEY(0x0E, 0x07, KEY_F7) + + MATRIX_KEY(0x0F, 0x00, KEY_ESC) + MATRIX_KEY(0x0F, 0x01, KEY_GRAVE) + MATRIX_KEY(0x0F, 0x02, KEY_F5) + MATRIX_KEY(0x0F, 0x03, KEY_TAB) + MATRIX_KEY(0x0F, 0x04, KEY_F1) + MATRIX_KEY(0x0F, 0x05, KEY_F2) + MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK) + MATRIX_KEY(0x0F, 0x07, KEY_F6) + + /* Software Handled Function Keys */ + MATRIX_KEY(0x14, 0x00, KEY_KP7) + + MATRIX_KEY(0x15, 0x00, KEY_KP9) + MATRIX_KEY(0x15, 0x01, KEY_KP8) + MATRIX_KEY(0x15, 0x02, KEY_KP4) + MATRIX_KEY(0x15, 0x04, KEY_KP1) + + MATRIX_KEY(0x16, 0x01, KEY_KPSLASH) + MATRIX_KEY(0x16, 0x02, KEY_KP6) + MATRIX_KEY(0x16, 0x03, KEY_KP5) + MATRIX_KEY(0x16, 0x04, KEY_KP3) + MATRIX_KEY(0x16, 0x05, KEY_KP2) + MATRIX_KEY(0x16, 0x07, KEY_KP0) + + MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK) + MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS) + MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS) + MATRIX_KEY(0x1B, 0x05, KEY_KPDOT) + + MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP) + + MATRIX_KEY(0x1D, 0x03, KEY_HOME) + MATRIX_KEY(0x1D, 0x04, KEY_END) + MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN) + MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP) + + MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK) + MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK) + MATRIX_KEY(0x1E, 0x02, KEY_MUTE) + + MATRIX_KEY(0x1F, 0x04, KEY_HELP)>; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -621,7 +767,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -635,7 +781,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; @@ -649,145 +795,6 @@ }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <32>; - nvidia,repeat-delay-ms = <160>; - nvidia,ghost-filter; - nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; - linux,keymap = <0x00020011 /* KEY_W */ - 0x0003001F /* KEY_S */ - 0x0004001E /* KEY_A */ - 0x0005002C /* KEY_Z */ - 0x000701d0 /* KEY_FN */ - - 0x0107007D /* KEY_LEFTMETA */ - 0x02060064 /* KEY_RIGHTALT */ - 0x02070038 /* KEY_LEFTALT */ - - 0x03000006 /* KEY_5 */ - 0x03010005 /* KEY_4 */ - 0x03020013 /* KEY_R */ - 0x03030012 /* KEY_E */ - 0x03040021 /* KEY_F */ - 0x03050020 /* KEY_D */ - 0x0306002D /* KEY_X */ - - 0x04000008 /* KEY_7 */ - 0x04010007 /* KEY_6 */ - 0x04020014 /* KEY_T */ - 0x04030023 /* KEY_H */ - 0x04040022 /* KEY_G */ - 0x0405002F /* KEY_V */ - 0x0406002E /* KEY_C */ - 0x04070039 /* KEY_SPACE */ - - 0x0500000A /* KEY_9 */ - 0x05010009 /* KEY_8 */ - 0x05020016 /* KEY_U */ - 0x05030015 /* KEY_Y */ - 0x05040024 /* KEY_J */ - 0x05050031 /* KEY_N */ - 0x05060030 /* KEY_B */ - 0x0507002B /* KEY_BACKSLASH */ - - 0x0600000C /* KEY_MINUS */ - 0x0601000B /* KEY_0 */ - 0x06020018 /* KEY_O */ - 0x06030017 /* KEY_I */ - 0x06040026 /* KEY_L */ - 0x06050025 /* KEY_K */ - 0x06060033 /* KEY_COMMA */ - 0x06070032 /* KEY_M */ - - 0x0701000D /* KEY_EQUAL */ - 0x0702001B /* KEY_RIGHTBRACE */ - 0x0703001C /* KEY_ENTER */ - 0x0707008B /* KEY_MENU */ - - 0x08040036 /* KEY_RIGHTSHIFT */ - 0x0805002A /* KEY_LEFTSHIFT */ - - 0x09050061 /* KEY_RIGHTCTRL */ - 0x0907001D /* KEY_LEFTCTRL */ - - 0x0B00001A /* KEY_LEFTBRACE */ - 0x0B010019 /* KEY_P */ - 0x0B020028 /* KEY_APOSTROPHE */ - 0x0B030027 /* KEY_SEMICOLON */ - 0x0B040035 /* KEY_SLASH */ - 0x0B050034 /* KEY_DOT */ - - 0x0C000044 /* KEY_F10 */ - 0x0C010043 /* KEY_F9 */ - 0x0C02000E /* KEY_BACKSPACE */ - 0x0C030004 /* KEY_3 */ - 0x0C040003 /* KEY_2 */ - 0x0C050067 /* KEY_UP */ - 0x0C0600D2 /* KEY_PRINT */ - 0x0C070077 /* KEY_PAUSE */ - - 0x0D00006E /* KEY_INSERT */ - 0x0D01006F /* KEY_DELETE */ - 0x0D030068 /* KEY_PAGEUP */ - 0x0D04006D /* KEY_PAGEDOWN */ - 0x0D05006A /* KEY_RIGHT */ - 0x0D06006C /* KEY_DOWN */ - 0x0D070069 /* KEY_LEFT */ - - 0x0E000057 /* KEY_F11 */ - 0x0E010058 /* KEY_F12 */ - 0x0E020042 /* KEY_F8 */ - 0x0E030010 /* KEY_Q */ - 0x0E04003E /* KEY_F4 */ - 0x0E05003D /* KEY_F3 */ - 0x0E060002 /* KEY_1 */ - 0x0E070041 /* KEY_F7 */ - - 0x0F000001 /* KEY_ESC */ - 0x0F010029 /* KEY_GRAVE */ - 0x0F02003F /* KEY_F5 */ - 0x0F03000F /* KEY_TAB */ - 0x0F04003B /* KEY_F1 */ - 0x0F05003C /* KEY_F2 */ - 0x0F06003A /* KEY_CAPSLOCK */ - 0x0F070040 /* KEY_F6 */ - - /* Software Handled Function Keys */ - 0x14000047 /* KEY_KP7 */ - - 0x15000049 /* KEY_KP9 */ - 0x15010048 /* KEY_KP8 */ - 0x1502004B /* KEY_KP4 */ - 0x1504004F /* KEY_KP1 */ - - 0x1601004E /* KEY_KPSLASH */ - 0x1602004D /* KEY_KP6 */ - 0x1603004C /* KEY_KP5 */ - 0x16040051 /* KEY_KP3 */ - 0x16050050 /* KEY_KP2 */ - 0x16070052 /* KEY_KP0 */ - - 0x1B010037 /* KEY_KPASTERISK */ - 0x1B03004A /* KEY_KPMINUS */ - 0x1B04004E /* KEY_KPPLUS */ - 0x1B050053 /* KEY_KPDOT */ - - 0x1C050073 /* KEY_VOLUMEUP */ - - 0x1D030066 /* KEY_HOME */ - 0x1D04006B /* KEY_END */ - 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */ - 0x1D060072 /* KEY_VOLUMEDOWN */ - 0x1D0700E1 /* KEY_BRIGHTNESSUP */ - - 0x1E000045 /* KEY_NUMLOCK */ - 0x1E010046 /* KEY_SCROLLLOCK */ - 0x1E020071 /* KEY_MUTE */ - - 0x1F04008A>; /* KEY_HELP */ - }; regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 7726dab3d08d..a1b0d965757f 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -4,12 +4,17 @@ model = "Avionic Design Tamonten SOM"; compatible = "ad,tamonten", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -19,7 +24,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -176,50 +181,50 @@ "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dta", "dtd", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "sdd", "spic", "spie", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -229,12 +234,12 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; @@ -457,7 +462,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -467,7 +472,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; }; @@ -492,7 +497,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 3ada3cb67f07..890562c667fb 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -6,8 +6,8 @@ model = "Avionic Design Tamonten Evaluation Carrier"; compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; @@ -32,7 +32,7 @@ }; }; - pcie-controller { + pcie-controller@80003000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 78deea5c0d21..216fa6d50c65 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; compatible = "compulab,trimslice", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000c500/rtc@56"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -191,49 +197,49 @@ "dtb", "dtc", "dtd", "dte", "gmb", "gme", "i2cp", "pta", "slxc", "slxd", "spdi", "spdo", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_atb { nvidia,pins = "atb", "cdev1", "cdev2", "dap1", "gma", "gmc", "gmd", "gpu", "gpu7", "gpv", "sdio1", "slxa", "slxk", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spia", "spib", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "pmc"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "owc", "spic", "spie", "spig", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -243,17 +249,17 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; conf_spif { nvidia,pins = "spif"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; @@ -301,7 +307,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; @@ -310,7 +316,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { status = "okay"; pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; @@ -366,7 +372,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -380,7 +386,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index aab872cd0530..571d12e6ac2d 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,50 +195,50 @@ "irtx", "pta", "rm", "sdc", "sdd", "slxc", "slxd", "slxk", "spdi", "spdo", "uac", "uad", "uca", "ucb", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ate { nvidia,pins = "ate", "csus", "dap3", "gmd", "gpv", "owc", "spia", "spib", "spic", "spid", "spie", "spig"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "gmb", "slxa", "spih"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dte { nvidia,pins = "dte", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsck", "lsda", "lsdi", "lvp0"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_kbca { nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdio1", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -242,22 +248,22 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lsc1", "lspi", "lvp1", "lvs", "pmc", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <1>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <31>; nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <3>; - nvidia,slew-rate-falling = <3>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; }; @@ -492,7 +498,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -556,7 +562,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -570,7 +576,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index d33a73cf167c..1843725785c9 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; compatible = "nvidia,whistler", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/max8907@3c"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,8 +195,8 @@ "kbcf", "sdc", "sdd", "spie", "spig", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_atd { nvidia,pins = "atd", "ate", "cdev1", "csus", @@ -198,54 +204,54 @@ "dtf", "gpu", "gpu7", "gpv", "i2cp", "rm", "sdio1", "slxa", "slxc", "slxd", "slxk", "spdi", "spdo", "uac", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_cdev2 { nvidia,pins = "cdev2", "spia", "spib"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "lc", "pmca", "pmcb", "pmcc", "pmcd", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_gme { nvidia,pins = "gme", "owc", "pta", "spic"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; conf_ls { nvidia,pins = "ls", "pmce"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; drive_dap1 { nvidia,pins = "drive_dap1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <1>; - nvidia,low-power-mode = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>; nvidia,pull-down-strength = <0>; nvidia,pull-up-strength = <0>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; }; }; @@ -495,7 +501,20 @@ }; }; - pmc { + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <20>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2>; + nvidia,kbc-col-pins = <16 17>; + nvidia,wakeup-source; + linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER) + MATRIX_KEY(0x01, 0x00, KEY_HOME) + MATRIX_KEY(0x01, 0x01, KEY_BACK) + MATRIX_KEY(0x02, 0x01, KEY_MENU)>; + }; + + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -543,7 +562,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -551,25 +570,12 @@ }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <20>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2>; - nvidia,kbc-col-pins = <16 17>; - nvidia,wakeup-source; - linux,keymap = <0x00000074 /* KEY_POWER */ - 0x01000066 /* KEY_HOME */ - 0x0101009E /* KEY_BACK */ - 0x0201008B>; /* KEY_MENU */ - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - usb0_vbus_reg: regulator { + usb0_vbus_reg: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "usb0_vbus"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c90d0aac3afe..480ecda3416b 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -16,7 +17,7 @@ serial4 = &uarte; }; - host1x { + host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -30,7 +31,7 @@ ranges = <0x54000000 0x54000000 0x04000000>; - mpe { + mpe@54040000 { compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; @@ -39,7 +40,7 @@ reset-names = "mpe"; }; - vi { + vi@54080000 { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -48,7 +49,7 @@ reset-names = "vi"; }; - epp { + epp@540c0000 { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -57,7 +58,7 @@ reset-names = "epp"; }; - isp { + isp@54100000 { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -66,7 +67,7 @@ reset-names = "isp"; }; - gr2d { + gr2d@54140000 { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -75,9 +76,9 @@ reset-names = "2d"; }; - gr3d { + gr3d@54140000 { compatible = "nvidia,tegra20-gr3d"; - reg = <0x54180000 0x00040000>; + reg = <0x54140000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; @@ -113,7 +114,7 @@ }; }; - hdmi { + hdmi@54280000 { compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -125,7 +126,7 @@ status = "disabled"; }; - tvo { + tvo@542c0000 { compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -133,9 +134,9 @@ status = "disabled"; }; - dsi { + dsi@542c0000 { compatible = "nvidia,tegra20-dsi"; - reg = <0x54300000 0x00040000>; + reg = <0x542c0000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_DSI>; resets = <&tegra_car 48>; reset-names = "dsi"; @@ -151,7 +152,7 @@ clocks = <&tegra_car TEGRA20_CLK_TWD>; }; - intc: interrupt-controller { + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 0x50040100 0x0100>; @@ -159,7 +160,7 @@ #interrupt-cells = <3>; }; - cache-controller { + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; arm,data-latency = <5 5 2>; @@ -178,14 +179,14 @@ clocks = <&tegra_car TEGRA20_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra20-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -210,12 +211,12 @@ #dma-cells = <1>; }; - ahb { + ahb@6000c004 { compatible = "nvidia,tegra20-ahb"; reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra20-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -231,7 +232,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000014 { compatible = "nvidia,tegra20-pinmux"; reg = <0x70000014 0x10 /* Tri-state registers */ 0x70000080 0x20 /* Mux registers */ @@ -239,12 +240,12 @@ 0x70000868 0xa8>; /* Pad control registers */ }; - das { + das@70000c00 { compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; - tegra_ac97: ac97 { + tegra_ac97: ac97@70002000 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -352,7 +353,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -362,7 +363,7 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -503,7 +504,7 @@ status = "disabled"; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -513,7 +514,7 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; @@ -527,7 +528,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; - iommu { + iommu@7000f024 { compatible = "nvidia,tegra20-gart"; reg = <0x7000f024 0x00000018 /* controller registers */ 0x58000000 0x02000000>; /* GART aperture */ @@ -540,7 +541,7 @@ #size-cells = <0>; }; - pcie-controller { + pcie-controller@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; reg = <0x80003000 0x00000800 /* PADS registers */ diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 08cad696e89f..e93fe45b7803 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -6,11 +6,16 @@ model = "NVIDIA Tegra30 Beaver evaluation board"; compatible = "nvidia,beaver", "nvidia,tegra30"; + aliases { + rtc0 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x7ff00000>; }; - pcie-controller { + pcie-controller@00003000 { status = "okay"; pex-clk-supply = <&sys_3v3_pexs_reg>; vdd-supply = <&ldo1_reg>; @@ -31,8 +36,8 @@ }; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&sys_3v3_reg>; @@ -44,7 +49,7 @@ }; }; - pinmux { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -52,8 +57,8 @@ sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -62,14 +67,14 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -78,15 +83,15 @@ "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { nvidia,pins = "sdmmc4_dat0_paa0", @@ -98,8 +103,8 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2", @@ -107,18 +112,18 @@ "dap2_din_pa4", "dap2_dout_pa5"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; pex_l1_prsnt_n_pdd4 { nvidia,pins = "pex_l1_prsnt_n_pdd4", "pex_l1_clkreq_n_pdd6"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,pull-down-strength = <46>; nvidia,pull-up-strength = <42>; nvidia,slew-rate-rising = <1>; @@ -159,7 +164,7 @@ status = "okay"; clock-frequency = <100000>; - rt5640: rt5640 { + rt5640: rt5640@1c { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; @@ -168,19 +173,6 @@ <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>; }; - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -284,6 +276,19 @@ }; }; }; + + tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; }; spi@7000da00 { @@ -296,13 +301,7 @@ }; }; - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - pmc { + pmc@7000e400 { status = "okay"; nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -314,6 +313,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -328,6 +333,15 @@ non-removable; }; + usb@7d004000 { + status = "okay"; + }; + + phy2: usb-phy@7d004000 { + vbus-supply = <&sys_3v3_reg>; + status = "okay"; + }; + usb@7d008000 { status = "okay"; }; @@ -342,7 +356,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -350,6 +364,19 @@ }; }; + gpio-leds { + compatible = "gpio-leds"; + + gpled1 { + label = "LED1"; /* CR5A1 (blue) */ + gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; + }; + gpled2 { + label = "LED2"; /* CR4A2 (green) */ + gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -453,19 +480,6 @@ }; }; - gpio-leds { - compatible = "gpio-leds"; - - gpled1 { - label = "LED1"; /* CR5A1 (blue) */ - gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; - }; - gpled2 { - label = "LED2"; /* CR4A2 (green) */ - gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; - }; - }; - sound { compatible = "nvidia,tegra-audio-rt5640-beaver", "nvidia,tegra-audio-rt5640"; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index 1082c5ed90d1..c9bfedcca6ed 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -8,6 +8,13 @@ model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + keep-power-in-suspend; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -83,12 +90,5 @@ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; }; }; - - sdhci@78000400 { - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - keep-power-in-suspend; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index bf012bddaafb..fadf55e46b2b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -8,6 +8,13 @@ model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + keep-power-in-suspend; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -95,11 +102,4 @@ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; - - sdhci@78000400 { - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - keep-power-in-suspend; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 5ea7dfa4d9fa..9104224124ee 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -27,11 +27,16 @@ model = "NVIDIA Tegra30 Cardhu evaluation board"; compatible = "nvidia,cardhu", "nvidia,tegra30"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x40000000>; }; - pcie-controller { + pcie-controller@00003000 { status = "okay"; pex-clk-supply = <&pex_hvdd_3v3_reg>; vdd-supply = <&ldo1_reg>; @@ -51,7 +56,17 @@ }; }; - pinmux { + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -59,8 +74,8 @@ sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -69,14 +84,14 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -85,15 +100,15 @@ "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { nvidia,pins = "sdmmc4_dat0_paa0", @@ -105,8 +120,8 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2", @@ -114,17 +129,17 @@ "dap2_din_pa4", "dap2_dout_pa5"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,pull-down-strength = <46>; nvidia,pull-up-strength = <42>; - nvidia,slew-rate-rising = <1>; - nvidia,slew-rate-falling = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>; }; uart3_txd_pw6 { nvidia,pins = "uart3_txd_pw6", @@ -132,8 +147,8 @@ "uart3_rts_n_pc0", "uart3_rxd_pw7"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; @@ -147,7 +162,11 @@ status = "okay"; }; - i2c@7000c000 { + pwm@7000a000 { + status = "okay"; + }; + + panelddc: i2c@7000c000 { status = "okay"; clock-frequency = <100000>; }; @@ -302,7 +321,7 @@ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; }; - tps62361 { + tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; @@ -326,13 +345,7 @@ }; }; - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - pmc { + pmc@7000e400 { status = "okay"; nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -344,6 +357,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -367,12 +386,23 @@ status = "okay"; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -380,6 +410,16 @@ }; }; + panel: panel { + compatible = "chunghwa,claa101wb01", "simple-panel"; + ddc-i2c-bus = <&panelddc>; + + power-supply = <&vdd_pnl1_reg>; + enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 31259b09e7cc..ed8e7700b46d 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra30-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -16,7 +17,7 @@ serial4 = &uarte; }; - pcie-controller { + pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -89,7 +90,7 @@ }; }; - host1x { + host1x@50000000 { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -103,7 +104,7 @@ ranges = <0x54000000 0x54000000 0x04000000>; - mpe { + mpe@54040000 { compatible = "nvidia,tegra30-mpe"; reg = <0x54040000 0x00040000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; @@ -112,7 +113,7 @@ reset-names = "mpe"; }; - vi { + vi@54080000 { compatible = "nvidia,tegra30-vi"; reg = <0x54080000 0x00040000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -121,7 +122,7 @@ reset-names = "vi"; }; - epp { + epp@540c0000 { compatible = "nvidia,tegra30-epp"; reg = <0x540c0000 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -130,7 +131,7 @@ reset-names = "epp"; }; - isp { + isp@54100000 { compatible = "nvidia,tegra30-isp"; reg = <0x54100000 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -139,7 +140,7 @@ reset-names = "isp"; }; - gr2d { + gr2d@54140000 { compatible = "nvidia,tegra30-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -148,7 +149,7 @@ clocks = <&tegra_car TEGRA30_CLK_GR2D>; }; - gr3d { + gr3d@54180000 { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA30_CLK_GR3D @@ -189,7 +190,7 @@ }; }; - hdmi { + hdmi@54280000 { compatible = "nvidia,tegra30-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -201,7 +202,7 @@ status = "disabled"; }; - tvo { + tvo@542c0000 { compatible = "nvidia,tegra30-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +210,7 @@ status = "disabled"; }; - dsi { + dsi@54300000 { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA30_CLK_DSIA>; @@ -227,7 +228,7 @@ clocks = <&tegra_car TEGRA30_CLK_TWD>; }; - intc: interrupt-controller { + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 0x50040100 0x0100>; @@ -235,7 +236,7 @@ #interrupt-cells = <3>; }; - cache-controller { + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; arm,data-latency = <6 6 2>; @@ -256,14 +257,14 @@ clocks = <&tegra_car TEGRA30_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -304,12 +305,12 @@ #dma-cells = <1>; }; - ahb: ahb { + ahb: ahb@6000c004 { compatible = "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */ }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -326,7 +327,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra30-pinmux"; reg = <0x70000868 0xd4 /* Pad control registers */ 0x70003000 0x3e4>; /* Mux registers */ @@ -405,7 +406,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -415,7 +416,7 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -586,7 +587,7 @@ status = "disabled"; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -596,14 +597,14 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - memory-controller { + memory-controller@7000f000 { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -612,7 +613,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; - iommu { + iommu@7000f010 { compatible = "nvidia,tegra30-smmu"; reg = <0x7000f010 0x02c 0x7000f1f0 0x010 @@ -622,7 +623,7 @@ nvidia,ahb = <&ahb>; }; - ahub { + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 0x70080200 0x100>; @@ -784,7 +785,7 @@ compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - phy_type = "ulpi"; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>; resets = <&tegra_car 58>; reset-names = "usb"; @@ -794,12 +795,23 @@ phy2: usb-phy@7d004000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d004000 0x4000>; - phy_type = "ulpi"; + reg = <0x7d004000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, - <&tegra_car TEGRA30_CLK_CDEV2>; - clock-names = "reg", "pll_u", "ulpi-link"; + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index e7f73b2e4550..5d7681be0580 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -15,6 +15,25 @@ / { compatible = "xlnx,zynq-7000"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + clocks = <&clkc 3>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + clocks = <&clkc 3>; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 5 4>, <0 6 4>; @@ -65,6 +84,24 @@ interrupts = <0 50 4>; }; + gem0: ethernet@e000b000 { + compatible = "cdns,gem"; + reg = <0xe000b000 0x4000>; + status = "disabled"; + interrupts = <0 22 4>; + clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; + clock-names = "pclk", "hclk", "tx_clk"; + }; + + gem1: ethernet@e000c000 { + compatible = "cdns,gem"; + reg = <0xe000c000 0x4000>; + status = "disabled"; + interrupts = <0 45 4>; + clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; + clock-names = "pclk", "hclk", "tx_clk"; + }; + slcr: slcr@f8000000 { compatible = "xlnx,zynq-slcr"; reg = <0xF8000000 0x1000>; @@ -106,7 +143,6 @@ compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; - clock-ranges; }; ttc1: ttc1@f8002000 { @@ -115,7 +151,6 @@ compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; - clock-ranges; }; scutimer: scutimer@f8f00600 { interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 21aea99a067b..34d680a46b7e 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -29,6 +29,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 79009e0b74b9..b2835d5fc09a 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,6 +30,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index d6acf2b1cdf4..2eda06889dfc 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -30,6 +30,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 473e21b87364..17c0fe627435 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -63,6 +63,9 @@ /* Base address to the AP system controller */ void __iomem *ap_syscon_base; +/* Base address to the external bus interface */ +static void __iomem *ebi_base; + /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -72,15 +75,11 @@ void __iomem *ap_syscon_base; * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical * ef000000 Cache flush - * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -91,16 +90,6 @@ void __iomem *ap_syscon_base; static struct map_desc ap_io_desc[] __initdata __maybe_unused = { { - .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, @@ -174,9 +163,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) -#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) - static int ap_flash_init(struct platform_device *dev) { u32 tmp; @@ -184,13 +170,15 @@ static int ap_flash_init(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) | + INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) + & INTEGRATOR_EBI_WRITE_ENABLE)) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } return 0; } @@ -202,13 +190,15 @@ static void ap_flash_exit(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + ~INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + INTEGRATOR_EBI_WRITE_ENABLE) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } } @@ -475,11 +465,17 @@ static const struct of_device_id ap_syscon_match[] = { { }, }; +static const struct of_device_id ebi_match[] = { + { .compatible = "arm,external-bus-interface"}, + { }, +}; + static void __init ap_init_of(void) { unsigned long sc_dec; struct device_node *root; struct device_node *syscon; + struct device_node *ebi; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; @@ -495,10 +491,16 @@ static void __init ap_init_of(void) syscon = of_find_matching_node(root, ap_syscon_match); if (!syscon) return; + ebi = of_find_matching_node(root, ebi_match); + if (!ebi) + return; ap_syscon_base = of_iomap(syscon, 0); if (!ap_syscon_base) return; + ebi_base = of_iomap(ebi, 0); + if (!ebi_base) + return; ap_sc_id = readl(ap_syscon_base); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4fc0a195de01..5e84149d1790 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -64,9 +64,6 @@ static void __iomem *intcp_con_base; /* * Logical Physical - * f1000000 10000000 Core module registers - * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -74,21 +71,10 @@ static void __iomem *intcp_con_base; * f1a00000 1a000000 Debug LEDs * fc900000 c9000000 GPIO * fca00000 ca000000 SIC - * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { { - .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index cce2c9dfb5d1..4a1065e41e9c 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -110,38 +110,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) } /* - * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects - * to simply request an IRQ passed as a resource. So the GPIO pin needs - * to be requested by this hog and set as input. - */ -static int __init cpu8815_eth_init(void) -{ - struct device_node *eth; - int gpio, irq, err; - - eth = of_find_node_by_path("/usb-s8815/ethernet-gpio"); - if (!eth) { - pr_info("could not find any ethernet GPIO\n"); - return 0; - } - gpio = of_get_gpio(eth, 0); - err = gpio_request(gpio, "eth_irq"); - if (err) { - pr_info("failed to request ethernet GPIO\n"); - return -ENODEV; - } - err = gpio_direction_input(gpio); - if (err) { - pr_info("failed to set ethernet GPIO as input\n"); - return -ENODEV; - } - irq = gpio_to_irq(gpio); - pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq); - return 0; -} -device_initcall(cpu8815_eth_init); - -/* * This GPIO pin turns on a line that is used to detect card insertion * on this board. */ diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index 1687df9b267f..875cf3f3f503 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -27,14 +27,6 @@ * see board-bock.c for checking detail of dip-switch */ -static const struct pinctrl_map bockw_pinctrl_map[] = { - /* SCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_data_a", "scif0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_ctrl", "scif0"), -}; - #define FPGA 0x18200000 #define IRQ0MR 0x30 #define COMCTLR 0x101c @@ -44,10 +36,6 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin_dt(1); - - pinctrl_register_mappings(bockw_pinctrl_map, - ARRAY_SIZE(bockw_pinctrl_map)); - r8a7778_pinmux_init(); r8a7778_add_dt_devices(); fpga = ioremap_nocache(FPGA, SZ_1M); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 4f9e3ec42ddc..d832a4477b4b 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -347,8 +347,6 @@ static const struct pinctrl_map marzen_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_wp", "sdhi0"), /* SMSC */ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", "intc_irq1_b", "intc"), diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 571409b611d3..7348d58f500e 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -584,15 +584,15 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]), CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index e9a3c6401845..dd989f93498f 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -590,18 +590,18 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("e6850000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("e6860000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), - CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), + CLKDEV_DEV_ID("e6870000.sd", &mstp_clks[MSTP415]), /* ICK */ CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index dfb0fff4d24c..9783945f8bc7 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -184,13 +184,13 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("ffe4e000.mmcif", &mstp_clks[MSTP331]), /* MMC */ + CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */ + CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */ + CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */ + CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */ CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */ CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index b545c8dbb818..f1fb89b76786 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -204,13 +204,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */ + CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */ + CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4e000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */ + CLKDEV_DEV_ID("ffe4e000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ - CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP320]), /* SDHI3 */ + CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP320]), /* SDHI3 */ CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */ }; diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 30552448b056..f44987a92ad4 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -302,17 +302,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), - CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("ee160000.sdhi", &mstp_clks[MSTP311]), + CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), - CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 87e349ddba7c..23edf8360c27 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -658,13 +658,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ - CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ + CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */ CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */ CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */ diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 616b96e86ad4..d05ba759da30 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,10 +2,10 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o devices.o id.o timer.o pm.o +obj-y := cpu.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-pins.o \ board-mop500-audio.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 43d6cb8c381d..9309ad4cbd09 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,16 +7,13 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <linux/platform_data/dma-ste-dma40.h> -#include "devices.h" #include "irqs.h" #include <linux/platform_data/asoc-ux500-msp.h> #include "ste-dma40-db8500.h" #include "board-mop500.h" -#include "devices-db8500.h" static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0efb1560fc35..f63619b69113 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -10,94 +10,18 @@ #include <linux/string.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include "board-mop500.h" -enum custom_pin_cfg_t { - PINS_FOR_DEFAULT, - PINS_FOR_U9500, -}; - -static enum custom_pin_cfg_t pinsfor; - /* These simply sets bias for pins */ #define BIAS(a,b) static unsigned long a[] = { b } -BIAS(pd, PIN_PULL_DOWN); -BIAS(in_nopull, PIN_INPUT_NOPULL); -BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); -BIAS(in_pu, PIN_INPUT_PULLUP); -BIAS(in_pd, PIN_INPUT_PULLDOWN); -BIAS(out_hi, PIN_OUTPUT_HIGH); -BIAS(out_lo, PIN_OUTPUT_LOW); -BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); - BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); -/* These also force them into GPIO mode */ -BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); -BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); -/* Sleep modes */ -BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_ENABLED); -BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_DISABLED); -BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_DISABLED); - -/* We use these to define hog settings that are always done on boot */ -#define DB8500_MUX_HOG(group,func) \ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) -#define DB8500_PIN_HOG(pin,conf) \ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) - -/* These are default states associated with device and changed runtime */ -#define DB8500_MUX(group,func,dev) \ - PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) -#define DB8500_PIN(pin,conf,dev) \ - PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) -#define DB8500_PIN_IDLE(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \ - pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) -#define DB8500_MUX_STATE(group, func, dev, state) \ - PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func) -#define DB8500_PIN_STATE(pin, conf, dev, state) \ - PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) - #define AB8500_MUX_HOG(group, func) \ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func) #define AB8500_PIN_HOG(pin, conf) \ @@ -344,725 +268,8 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = { AB8505_PIN_HOG("GPIO53_D15", in_pd), }; -/* Pin control settings */ -static struct pinctrl_map __initdata mop500_family_pinmap[] = { - /* - * uMSP0, mux in 4 pins, regular placement of RX/TX - * explicitly set the pins to no pull - */ - DB8500_MUX_HOG("msp0txrx_a_1", "msp0"), - DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"), - DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */ - DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */ - DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */ - DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */ - /* MSP2 for HDMI, pull down TXD, TCK, TFS */ - DB8500_MUX_HOG("msp2_a_1", "msp2"), - DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */ - DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */ - DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */ - DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */ - /* - * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to - * pull-up - * TODO: is this really correct? Snowball doesn't have a LCD. - */ - DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), - DB8500_PIN_HOG("GPIO68_E1", in_pu), - DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), - /* - * STMPE1601/tc35893 keypad IRQ GPIO 218 - * TODO: set for snowball and HREF really?? - */ - DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), - /* - * UART0, we do not mux in u0 here. - * uart-0 pins gpio configuration should be kept intact to prevent - * a glitch in tx line when the tty dev is opened. Later these pins - * are configured by uart driver - */ - DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ - DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ - /* - * Mux in UART2 on altfunction C and set pull-ups. - * TODO: is this used on U8500 variants and Snowball really? - * The setting on GPIO31 conflicts with magnetometer use on hrefv60 - */ - /* default state for UART2 */ - DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), - DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ - DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ - /* Sleep state for UART2 */ - DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), - DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), - /* - * The following pin sets were known as "runtime pins" before being - * converted to the pinctrl model. Here we model them as "default" - * states. - */ - /* Mux in UART0 after initialization */ - DB8500_MUX("u0_a_1", "u0", "uart0"), - DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ - DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ - DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ - DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* Sleep state for UART0 */ - DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), - /* Mux in UART1 after initialization */ - DB8500_MUX("u1rxtx_a_1", "u1", "uart1"), - DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */ - DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */ - /* Sleep state for UART1 */ - DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), - DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), - /* MSP1 for ALSA codec */ - DB8500_MUX_HOG("msp1txrx_a_1", "msp1"), - DB8500_MUX_HOG("msp1_a_1", "msp1"), - DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup), - DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup), - DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup), - DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup), - /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ - DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), - DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), - /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ - DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"), - DB8500_PIN("GPIO69_E2", in_pu, "0-0070"), - /* LCD VSI1 sleep state */ - DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"), - /* Mux in i2c0 block, default state */ - DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), - /* i2c0 sleep state */ - DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */ - DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */ - /* Mux in i2c1 block, default state */ - DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"), - /* i2c1 sleep state */ - DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */ - DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */ - /* Mux in i2c2 block, default state */ - DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"), - /* i2c2 sleep state */ - DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */ - DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */ - /* Mux in i2c3 block, default state */ - DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"), - /* i2c3 sleep state */ - DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */ - DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */ - /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */ - DB8500_MUX("mc0_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */ - DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */ - DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */ - DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */ - DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */ - DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */ - DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */ - DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ - DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ - DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ - /* SDI0 sleep state */ - DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"), - - /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ - DB8500_MUX("mc1_a_1", "mc1", "sdi1"), - DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ - DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */ - DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */ - DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */ - DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ - DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ - DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ - /* SDI1 sleep state */ - DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */ - DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */ - DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */ - - /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ - DB8500_MUX("mc2_a_1", "mc2", "sdi2"), - DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ - DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */ - DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */ - DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */ - DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */ - DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */ - DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */ - DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */ - DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ - DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ - DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ - /* SDI2 sleep state */ - DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */ - DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */ - DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */ - DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */ - - /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ - DB8500_MUX("mc4_a_1", "mc4", "sdi4"), - DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ - DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */ - DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */ - DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */ - DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */ - DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */ - DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */ - DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */ - DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ - DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ - DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ - /*SDI4 sleep state */ - DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */ - DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */ - DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */ - DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ - - /* Mux in USB pins, drive STP high */ - /* USB default state */ - DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */ - /* USB sleep state */ - DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ - DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ - DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ - DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ - DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ - DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ - DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ - - /* Mux in SPI2 pins on the "other C1" altfunction */ - DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), - DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ - DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ - DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ - DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ - /* SPI2 idle state */ - DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ - /* SPI2 sleep state */ - DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ - DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ - - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ - - /* STM APE pins states */ - DB8500_MUX_STATE("stmape_c_1", "stmape", - "stm", "ape_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "ape_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "ape_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "ape_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "ape_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "ape_mipi34"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat0 */ - - DB8500_MUX_STATE("stmape_oc1_1", "stmape", - "stm", "ape_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "ape_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "ape_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "ape_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "ape_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "ape_microsd"), /* dat3 */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "ape_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat3 */ - - /* STM Modem pins states */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod tx */ - - DB8500_MUX_STATE("stmmod_b_1", "stmmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "mod_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "mod_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "mod_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "mod_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "mod_microsd"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_microsd"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_microsd"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod tx */ - - /* STM dual Modem/APE pins state */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("stmape_c_2", "stmape", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ -}; - -/* - * These are specifically for the MOP500 and HREFP (pre-v60) version of the - * board, which utilized a TC35892 GPIO expander instead of using a lot of - * on-chip pins as the HREFv60 and later does. - */ -static struct pinctrl_map __initdata mop500_pinmap[] = { - /* Mux in SSP0, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up - * the pins. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), - DB8500_PIN_HOG("GPIO7_AG5", in_pu), - /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ - DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), - /* Mux in UART1 and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ - /* - * Runtime stuff: make it possible to mux in the SKE keypad - * and bias the pins - */ - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ - - /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ - DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), -}; - -/* - * The HREFv60 series of platforms is using available pins on the DB8500 - * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 - * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. - */ -static struct pinctrl_map __initdata hrefv60_pinmap[] = { - /* Drive WLAN_ENA low */ - DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant - * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias - * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ - DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ - DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ - DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ - DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ - /* - * Display Interface 1 uses GPIO 65 for RST (reset). - * Display Interface 2 uses GPIO 66 for RST (reset). - * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) - */ - DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ - DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ - /* - * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up the IRQ line and drive both - * reset signals low. - */ - DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ - DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ - DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ - /* - * Drive D19-D23 for the ETM PTM trace interface low, - * (presumably pins are unconnected therefore grounded here, - * the "other alt C1" setting enables these pins) - */ - DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), - DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), - DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), - DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), - DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), - /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ - DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ - /* NFC ENA and RESET to low, pulldown IRQ line */ - DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ - DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ - /* - * SKE keyboard partly on alt A and partly on "Other alt C1" - * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three - * rows of 6 keys, then pull up force sensing interrup and - * drive reset and force sensing WU low. - */ - DB8500_MUX_HOG("kp_a_1", "kp"), - DB8500_MUX_HOG("kp_oc1_1", "kp"), - DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ - DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ - DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ - DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ - DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ - DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ - DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ - DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ - DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ - DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ - DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ - /* DiPro Sensor interrupt */ - DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ - /* Audio Amplifier HF enable */ - DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ - /* GBF interface, pull low to reset state */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ - /* MSP : HDTV INTERFACE GPIO line */ - DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), - /* Accelerometer interrupt lines */ - DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ - DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ - /* SD card detect GPIO pin */ - DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu), - /* - * Runtime stuff - * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor - * etc. - */ - DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), -}; - -static struct pinctrl_map __initdata u9500_pinmap[] = { - /* Mux in UART1 (just RX/TX) and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), - DB8500_PIN_HOG("GPIO5_AG6", out_hi), - /* WLAN_IRQ line */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), - /* HSI */ - DB8500_MUX_HOG("hsir_a_1", "hsi"), - DB8500_MUX_HOG("hsit_a_2", "hsi"), - DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ - DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ - DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ - DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ - DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ - DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ - DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ - DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */ -}; - -static struct pinctrl_map __initdata u8500_pinmap[] = { - DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ -}; - -static struct pinctrl_map __initdata snowball_pinmap[] = { - /* Mux in SSP0 connected to AB8500, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* Always drive the MC0 DAT31DIR line high on these boards */ - DB8500_PIN_HOG("GPIO21_AB3", out_hi), - /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ - DB8500_MUX_HOG("sm_b_1", "sm"), - /* User LED */ - DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), - /* Drive RSTn_LAN high */ - DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), - /* Accelerometer/Magnetometer */ - DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ - DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ - DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ - /* WLAN/GBF */ - DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ - DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ -}; - -/* - * passing "pinsfor=" in kernel cmdline allows for custom - * configuration of GPIOs on u8500 derived boards. - */ -static int __init early_pinsfor(char *p) -{ - pinsfor = PINS_FOR_DEFAULT; - - if (strcmp(p, "u9500-21") == 0) - pinsfor = PINS_FOR_U9500; - - return 0; -} -early_param("pinsfor", early_pinsfor); - -int pins_for_u9500(void) -{ - if (pinsfor == PINS_FOR_U9500) - return 1; - - return 0; -} - -static void __init mop500_href_family_pinmaps_init(void) -{ - switch (pinsfor) { - case PINS_FOR_U9500: - pinctrl_register_mappings(u9500_pinmap, - ARRAY_SIZE(u9500_pinmap)); - break; - case PINS_FOR_DEFAULT: - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); - default: - break; - } -} - void __init mop500_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(mop500_pinmap, - ARRAY_SIZE(mop500_pinmap)); - mop500_href_family_pinmaps_init(); if (machine_is_u8520()) pinctrl_register_mappings(ab8505_pinmap, ARRAY_SIZE(ab8505_pinmap)); @@ -1073,23 +280,12 @@ void __init mop500_pinmaps_init(void) void __init snowball_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(snowball_pinmap, - ARRAY_SIZE(snowball_pinmap)); - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } void __init hrefv60_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(hrefv60_pinmap, - ARRAY_SIZE(hrefv60_pinmap)); - mop500_href_family_pinmaps_init(); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 0dc44c683427..a4e139aa2441 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -30,20 +30,6 @@ struct regulator_init_data gpio_en_3v3_regulator = { .consumer_supplies = gpio_en_3v3_consumers, }; -static struct regulator_consumer_supply sdi0_reg_consumers[] = { - REGULATOR_SUPPLY("vqmmc", "sdi0"), -}; - -struct regulator_init_data sdi0_reg_init_data = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2900000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers), - .consumer_supplies = sdi0_reg_consumers, -}; - /* * TPS61052 regulator */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 039f5132c370..9bece38fe933 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,7 +18,6 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; -extern struct regulator_init_data sdi0_reg_init_data; void mop500_regulator_init(void); diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 26600a1c5319..fcbf3a13a539 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -14,10 +14,8 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> -#include "devices.h" #include "db8500-regs.h" -#include "devices-db8500.h" #include "board-mop500.h" #include "ste-dma40-db8500.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c deleted file mode 100644 index 514d40b625a4..000000000000 --- a/arch/arm/mach-ux500/board-mop500.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2008-2012 ST-Ericsson - * - * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/platform_data/db8500_thermal.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/regulator/ab8500.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/driver.h> -#include <linux/mfd/tps6105x.h> -#include <linux/platform_data/leds-lp55xx.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <asm/mach-types.h> - -#include "setup.h" -#include "devices.h" -#include "irqs.h" - -#include "ste-dma40-db8500.h" -#include "db8500-regs.h" -#include "devices-db8500.h" -#include "board-mop500.h" -#include "board-mop500-regulators.h" - -struct ab8500_platform_data ab8500_platdata = { - .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator = &ab8500_regulator_plat_data, -}; - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV8_SSP0, -}; - -static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV8_SSP0, -}; -#endif - -struct pl022_ssp_controller ssp0_plat = { - .bus_id = 0, -#ifdef CONFIG_STE_DMA40 - .enable_dma = 1, - .dma_filter = stedma40_filter, - .dma_rx_param = &ssp0_dma_cfg_rx, - .dma_tx_param = &ssp0_dma_cfg_tx, -#else - .enable_dma = 0, -#endif - /* on this platform, gpio 31,142,144,214 & - * 224 are connected as chip selects - */ - .num_chipselect = 5, -}; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 511d6febbe99..d48e8662c676 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -87,7 +87,6 @@ extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; -extern struct pl022_ssp_controller ssp0_plat; void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 12c7e5c03ea4..bc8a6183560d 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -21,21 +21,32 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/regulator/machine.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <linux/random.h> #include <asm/pmu.h> #include <asm/mach/map.h> #include "setup.h" -#include "devices.h" #include "irqs.h" -#include "devices-db8500.h" -#include "db8500-regs.h" +#include "board-mop500-regulators.h" #include "board-mop500.h" +#include "db8500-regs.h" #include "id.h" +struct ab8500_platform_data ab8500_platdata = { + .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator = &ab8500_regulator_plat_data, +}; + +struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .ab_irq = IRQ_DB8500_AB8500, + .irq_base = IRQ_PRCMU_BASE, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; + /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), @@ -159,17 +170,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", NULL), - /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, - "pinctrl-db8500", NULL), {}, }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), {}, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index f84d4397896b..d11ac4bf336c 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include "setup.h" -#include "devices.h" #include "board-mop500.h" #include "db8500-regs.h" @@ -64,12 +63,7 @@ void __init ux500_init_irq(void) } else ux500_unknown_soc(); -#ifdef CONFIG_OF - if (of_have_populated_dt()) - irqchip_init(); - else -#endif - gic_init(0, 29, dist_base, cpu_base); + irqchip_init(); /* * Init clocks here so that they are available for system timer @@ -79,16 +73,11 @@ void __init ux500_init_irq(void) prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - if (of_have_populated_dt()) - u8500_of_clk_init(U8500_CLKRST1_BASE, - U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, - U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); - else - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); + u8500_of_clk_init(U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); } else if (cpu_is_u9540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c deleted file mode 100644 index c59f89d058ff..000000000000 --- a/arch/arm/mach-ux500/devices-db8500.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> -#include <linux/mfd/dbx500-prcmu.h> - -#include "setup.h" -#include "irqs.h" - -#include "db8500-regs.h" -#include "devices-db8500.h" - -struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .ab_irq = IRQ_DB8500_AB8500, - .irq_base = IRQ_PRCMU_BASE, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h deleted file mode 100644 index b8ffc9979bb2..000000000000 --- a/arch/arm/mach-ux500/devices-db8500.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB8500_H -#define __DEVICES_DB8500_H - -#include "irqs.h" -#include "db8500-regs.h" - -struct platform_device; - -extern struct ab8500_platform_data ab8500_platdata; -extern struct prcmu_pdata db8500_prcmu_pdata; - -#endif diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c deleted file mode 100644 index 0f9e52b95935..000000000000 --- a/arch/arm/mach-ux500/devices.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/amba/bus.h> - -#include "setup.h" - -#include "db8500-regs.h" - -void __init amba_add_devices(struct amba_device *devs[], int num) -{ - int i; - - for (i = 0; i < num; i++) { - struct amba_device *d = devs[i]; - amba_device_register(d, &iomem_resource); - } -} diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h deleted file mode 100644 index 5bca7c605cd6..000000000000 --- a/arch/arm/mach-ux500/devices.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __ASM_ARCH_DEVICES_H__ -#define __ASM_ARCH_DEVICES_H__ - -struct platform_device; -struct amba_device; - -extern struct amba_device ux500_pl031_device; - -#endif diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index b1dd8584bed4..2dea8b59d222 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -19,17 +19,11 @@ void ux500_restart(enum reboot_mode mode, const char *cmd); void __init ux500_map_io(void); -extern void __init u8500_map_io(void); - -extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern struct device *ux500_soc_device_init(const char *soc_id); -struct amba_device; -extern void __init amba_add_devices(struct amba_device *devs[], int num); - extern void ux500_timer_init(void); #define __IO_DEV_DESC(x, sz) { \ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 05a4ff78b3bd..87efda0aa348 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -10,40 +10,12 @@ #include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> - -#include <asm/smp_twd.h> #include "setup.h" -#include "irqs.h" #include "db8500-regs.h" #include "id.h" -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, - U8500_TWD_BASE, IRQ_LOCALTIMER); - -static void __init ux500_twd_init(void) -{ - struct twd_local_timer *twd_local_timer; - int err; - - /* Use this to switch local timer base if changed in new ASICs */ - twd_local_timer = &u8500_twd_local_timer; - - if (of_have_populated_dt()) - clocksource_of_init(); - else { - err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); - } -} -#else -#define ux500_twd_init() do { } while(0) -#endif - const static struct of_device_id prcmu_timer_of_match[] __initconst = { { .compatible = "stericsson,db8500-prcmu-timer-4", }, { }, @@ -51,54 +23,26 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = { void __init ux500_timer_init(void) { - void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; void __iomem *tmp_base; struct device_node *np; - if (cpu_is_u8500_family() || cpu_is_ux540_family()) { - mtu_timer_base = __io_address(U8500_MTU0_BASE); + if (cpu_is_u8500_family() || cpu_is_ux540_family()) prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); - } else { + else ux500_unknown_soc(); - } - /* TODO: Once MTU has been DT:ed place code above into else. */ - if (of_have_populated_dt()) { -#ifdef CONFIG_OF - np = of_find_matching_node(NULL, prcmu_timer_of_match); - if (!np) -#endif - goto dt_fail; + np = of_find_matching_node(NULL, prcmu_timer_of_match); + if (!np) + goto dt_fail; - tmp_base = of_iomap(np, 0); - if (!tmp_base) - goto dt_fail; + tmp_base = of_iomap(np, 0); + if (!tmp_base) + goto dt_fail; - prcmu_timer_base = tmp_base; - } + prcmu_timer_base = tmp_base; dt_fail: - /* Doing it the old fashioned way. */ - - /* - * Here we register the timerblocks active in the system. - * Localtimers (twd) is started when both cpu is up and running. - * MTU register a clocksource, clockevent and sched_clock. - * Since the MTU is located in the VAPE power domain - * it will be cleared in sleep which makes it unsuitable. - * We however need it as a timer tick (clockevent) - * during boot to calibrate delay until twd is started. - * RTC-RTT have problems as timer tick during boot since it is - * depending on delay which is not yet calibrated. RTC-RTT is in the - * always-on powerdomain and is used as clockevent instead of twd when - * sleeping. - * The PRCMU timer 4 register a clocksource and - * sched_clock with higher rating then MTU since is always-on. - * - */ - if (!of_have_populated_dt()) - nmdk_timer_init(mtu_timer_base, IRQ_MTU0); clksrc_dbx500_prcmu_init(prcmu_timer_base); - ux500_twd_init(); + clocksource_of_init(); } diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index ace7309c4369..a3b7c5dd3c16 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/ obj-$(CONFIG_X86) += x86/ diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile new file mode 100644 index 000000000000..706adc6ae70c --- /dev/null +++ b/drivers/clk/shmobile/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o + +# for emply built-in.o +obj-n := dummy diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c new file mode 100644 index 000000000000..aac4756ec52e --- /dev/null +++ b/drivers/clk/shmobile/clk-div6.c @@ -0,0 +1,185 @@ +/* + * r8a7790 Common Clock Framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define CPG_DIV6_CKSTP BIT(8) +#define CPG_DIV6_DIV(d) ((d) & 0x3f) +#define CPG_DIV6_DIV_MASK 0x3f + +/** + * struct div6_clock - MSTP gating clock + * @hw: handle between common and hardware-specific interfaces + * @reg: IO-remapped register + * @div: divisor value (1-64) + */ +struct div6_clock { + struct clk_hw hw; + void __iomem *reg; + unsigned int div; +}; + +#define to_div6_clock(_hw) container_of(_hw, struct div6_clock, hw) + +static int cpg_div6_clock_enable(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg); + + return 0; +} + +static void cpg_div6_clock_disable(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + /* DIV6 clocks require the divisor field to be non-zero when stopping + * the clock. + */ + clk_writel(CPG_DIV6_CKSTP | CPG_DIV6_DIV(CPG_DIV6_DIV_MASK), + clock->reg); +} + +static int cpg_div6_clock_is_enabled(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + return !(clk_readl(clock->reg) & CPG_DIV6_CKSTP); +} + +static unsigned long cpg_div6_clock_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct div6_clock *clock = to_div6_clock(hw); + unsigned int div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1; + + return parent_rate / div; +} + +static unsigned int cpg_div6_clock_calc_div(unsigned long rate, + unsigned long parent_rate) +{ + unsigned int div; + + div = DIV_ROUND_CLOSEST(parent_rate, rate); + return clamp_t(unsigned int, div, 1, 64); +} + +static long cpg_div6_clock_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned int div = cpg_div6_clock_calc_div(rate, *parent_rate); + + return *parent_rate / div; +} + +static int cpg_div6_clock_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct div6_clock *clock = to_div6_clock(hw); + unsigned int div = cpg_div6_clock_calc_div(rate, parent_rate); + + clock->div = div; + + /* Only program the new divisor if the clock isn't stopped. */ + if (!(clk_readl(clock->reg) & CPG_DIV6_CKSTP)) + clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg); + + return 0; +} + +static const struct clk_ops cpg_div6_clock_ops = { + .enable = cpg_div6_clock_enable, + .disable = cpg_div6_clock_disable, + .is_enabled = cpg_div6_clock_is_enabled, + .recalc_rate = cpg_div6_clock_recalc_rate, + .round_rate = cpg_div6_clock_round_rate, + .set_rate = cpg_div6_clock_set_rate, +}; + +static void __init cpg_div6_clock_init(struct device_node *np) +{ + struct clk_init_data init; + struct div6_clock *clock; + const char *parent_name; + const char *name; + struct clk *clk; + int ret; + + clock = kzalloc(sizeof(*clock), GFP_KERNEL); + if (!clock) { + pr_err("%s: failed to allocate %s DIV6 clock\n", + __func__, np->name); + return; + } + + /* Remap the clock register and read the divisor. Disabling the + * clock overwrites the divisor, so we need to cache its value for the + * enable operation. + */ + clock->reg = of_iomap(np, 0); + if (clock->reg == NULL) { + pr_err("%s: failed to map %s DIV6 clock register\n", + __func__, np->name); + goto error; + } + + clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1; + + /* Parse the DT properties. */ + ret = of_property_read_string(np, "clock-output-names", &name); + if (ret < 0) { + pr_err("%s: failed to get %s DIV6 clock output name\n", + __func__, np->name); + goto error; + } + + parent_name = of_clk_get_parent_name(np, 0); + if (parent_name == NULL) { + pr_err("%s: failed to get %s DIV6 clock parent name\n", + __func__, np->name); + goto error; + } + + /* Register the clock. */ + init.name = name; + init.ops = &cpg_div6_clock_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = &parent_name; + init.num_parents = 1; + + clock->hw.init = &init; + + clk = clk_register(NULL, &clock->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register %s DIV6 clock (%ld)\n", + __func__, np->name, PTR_ERR(clk)); + goto error; + } + + of_clk_add_provider(np, of_clk_src_simple_get, clk); + + return; + +error: + if (clock->reg) + iounmap(clock->reg); + kfree(clock); +} +CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init); diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c new file mode 100644 index 000000000000..e576b60de20e --- /dev/null +++ b/drivers/clk/shmobile/clk-mstp.c @@ -0,0 +1,229 @@ +/* + * R-Car MSTP clocks + * + * Copyright (C) 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +/* + * MSTP clocks. We can't use standard gate clocks as we need to poll on the + * status register when enabling the clock. + */ + +#define MSTP_MAX_CLOCKS 32 + +/** + * struct mstp_clock_group - MSTP gating clocks group + * + * @data: clocks in this group + * @smstpcr: module stop control register + * @mstpsr: module stop status register (optional) + * @lock: protects writes to SMSTPCR + */ +struct mstp_clock_group { + struct clk_onecell_data data; + void __iomem *smstpcr; + void __iomem *mstpsr; + spinlock_t lock; +}; + +/** + * struct mstp_clock - MSTP gating clock + * @hw: handle between common and hardware-specific interfaces + * @bit_index: control bit index + * @group: MSTP clocks group + */ +struct mstp_clock { + struct clk_hw hw; + u32 bit_index; + struct mstp_clock_group *group; +}; + +#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw) + +static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable) +{ + struct mstp_clock *clock = to_mstp_clock(hw); + struct mstp_clock_group *group = clock->group; + u32 bitmask = BIT(clock->bit_index); + unsigned long flags; + unsigned int i; + u32 value; + + spin_lock_irqsave(&group->lock, flags); + + value = clk_readl(group->smstpcr); + if (enable) + value &= ~bitmask; + else + value |= bitmask; + clk_writel(value, group->smstpcr); + + spin_unlock_irqrestore(&group->lock, flags); + + if (!enable || !group->mstpsr) + return 0; + + for (i = 1000; i > 0; --i) { + if (!(clk_readl(group->mstpsr) & bitmask)) + break; + cpu_relax(); + } + + if (!i) { + pr_err("%s: failed to enable %p[%d]\n", __func__, + group->smstpcr, clock->bit_index); + return -ETIMEDOUT; + } + + return 0; +} + +static int cpg_mstp_clock_enable(struct clk_hw *hw) +{ + return cpg_mstp_clock_endisable(hw, true); +} + +static void cpg_mstp_clock_disable(struct clk_hw *hw) +{ + cpg_mstp_clock_endisable(hw, false); +} + +static int cpg_mstp_clock_is_enabled(struct clk_hw *hw) +{ + struct mstp_clock *clock = to_mstp_clock(hw); + struct mstp_clock_group *group = clock->group; + u32 value; + + if (group->mstpsr) + value = clk_readl(group->mstpsr); + else + value = clk_readl(group->smstpcr); + + return !!(value & BIT(clock->bit_index)); +} + +static const struct clk_ops cpg_mstp_clock_ops = { + .enable = cpg_mstp_clock_enable, + .disable = cpg_mstp_clock_disable, + .is_enabled = cpg_mstp_clock_is_enabled, +}; + +static struct clk * __init +cpg_mstp_clock_register(const char *name, const char *parent_name, + unsigned int index, struct mstp_clock_group *group) +{ + struct clk_init_data init; + struct mstp_clock *clock; + struct clk *clk; + + clock = kzalloc(sizeof(*clock), GFP_KERNEL); + if (!clock) { + pr_err("%s: failed to allocate MSTP clock.\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &cpg_mstp_clock_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = &parent_name; + init.num_parents = 1; + + clock->bit_index = index; + clock->group = group; + clock->hw.init = &init; + + clk = clk_register(NULL, &clock->hw); + + if (IS_ERR(clk)) + kfree(clock); + + return clk; +} + +static void __init cpg_mstp_clocks_init(struct device_node *np) +{ + struct mstp_clock_group *group; + struct clk **clks; + unsigned int i; + + group = kzalloc(sizeof(*group), GFP_KERNEL); + clks = kzalloc(MSTP_MAX_CLOCKS * sizeof(*clks), GFP_KERNEL); + if (group == NULL || clks == NULL) { + kfree(group); + kfree(clks); + pr_err("%s: failed to allocate group\n", __func__); + return; + } + + spin_lock_init(&group->lock); + group->data.clks = clks; + + group->smstpcr = of_iomap(np, 0); + group->mstpsr = of_iomap(np, 1); + + if (group->smstpcr == NULL) { + pr_err("%s: failed to remap SMSTPCR\n", __func__); + kfree(group); + kfree(clks); + return; + } + + for (i = 0; i < MSTP_MAX_CLOCKS; ++i) { + const char *parent_name; + const char *name; + u32 clkidx; + int ret; + + /* Skip clocks with no name. */ + ret = of_property_read_string_index(np, "clock-output-names", + i, &name); + if (ret < 0 || strlen(name) == 0) + continue; + + parent_name = of_clk_get_parent_name(np, i); + ret = of_property_read_u32_index(np, "renesas,clock-indices", i, + &clkidx); + if (parent_name == NULL || ret < 0) + break; + + if (clkidx >= MSTP_MAX_CLOCKS) { + pr_err("%s: invalid clock %s %s index %u)\n", + __func__, np->name, name, clkidx); + continue; + } + + clks[clkidx] = cpg_mstp_clock_register(name, parent_name, i, + group); + if (!IS_ERR(clks[clkidx])) { + group->data.clk_num = max(group->data.clk_num, clkidx); + /* + * Register a clkdev to let board code retrieve the + * clock by name and register aliases for non-DT + * devices. + * + * FIXME: Remove this when all devices that require a + * clock will be instantiated from DT. + */ + clk_register_clkdev(clks[clkidx], name, NULL); + } else { + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clks[clkidx])); + } + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &group->data); +} +CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init); diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c new file mode 100644 index 000000000000..a59ec217a124 --- /dev/null +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -0,0 +1,298 @@ +/* + * rcar_gen2 Core CPG Clocks + * + * Copyright (C) 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +struct rcar_gen2_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +#define CPG_SDCKCR 0x00000074 +#define CPG_PLL0CR 0x000000d8 +#define CPG_FRQCRC 0x000000e0 +#define CPG_FRQCRC_ZFC_MASK (0x1f << 8) +#define CPG_FRQCRC_ZFC_SHIFT 8 + +/* ----------------------------------------------------------------------------- + * Z Clock + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = parent->rate * mult / 32 + * parent - fixed parent. No clk_set_parent support + */ + +struct cpg_z_clk { + struct clk_hw hw; + void __iomem *reg; +}; + +#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw) + +static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct cpg_z_clk *zclk = to_z_clk(hw); + unsigned int mult; + unsigned int val; + + val = (clk_readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK) + >> CPG_FRQCRC_ZFC_SHIFT; + mult = 32 - val; + + return div_u64((u64)parent_rate * mult, 32); +} + +static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long prate = *parent_rate; + unsigned int mult; + + if (!prate) + prate = 1; + + mult = div_u64((u64)rate * 32, prate); + mult = clamp(mult, 1U, 32U); + + return *parent_rate / 32 * mult; +} + +static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct cpg_z_clk *zclk = to_z_clk(hw); + unsigned int mult; + u32 val; + + mult = div_u64((u64)rate * 32, parent_rate); + mult = clamp(mult, 1U, 32U); + + val = clk_readl(zclk->reg); + val &= ~CPG_FRQCRC_ZFC_MASK; + val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT; + clk_writel(val, zclk->reg); + + return 0; +} + +static const struct clk_ops cpg_z_clk_ops = { + .recalc_rate = cpg_z_clk_recalc_rate, + .round_rate = cpg_z_clk_round_rate, + .set_rate = cpg_z_clk_set_rate, +}; + +static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg) +{ + static const char *parent_name = "pll0"; + struct clk_init_data init; + struct cpg_z_clk *zclk; + struct clk *clk; + + zclk = kzalloc(sizeof(*zclk), GFP_KERNEL); + if (!zclk) + return ERR_PTR(-ENOMEM); + + init.name = "z"; + init.ops = &cpg_z_clk_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + zclk->reg = cpg->reg + CPG_FRQCRC; + zclk->hw.init = &init; + + clk = clk_register(NULL, &zclk->hw); + if (IS_ERR(clk)) + kfree(zclk); + + return clk; +} + +/* ----------------------------------------------------------------------------- + * CPG Clock Data + */ + +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) *1 *1 + *--------------------------------------------------- + * 0 0 0 15 x 1 x172/2 x208/2 x106 + * 0 0 1 15 x 1 x172/2 x208/2 x88 + * 0 1 0 20 x 1 x130/2 x156/2 x80 + * 0 1 1 20 x 1 x130/2 x156/2 x66 + * 1 0 0 26 / 2 x200/2 x240/2 x122 + * 1 0 1 26 / 2 x200/2 x240/2 x102 + * 1 1 0 30 / 2 x172/2 x208/2 x106 + * 1 1 1 30 / 2 x172/2 x208/2 x88 + * + * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) + */ +#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \ + (((md) & BIT(13)) >> 12) | \ + (((md) & BIT(19)) >> 19)) +struct cpg_pll_config { + unsigned int extal_div; + unsigned int pll1_mult; + unsigned int pll3_mult; +}; + +static const struct cpg_pll_config cpg_pll_configs[8] __initconst = { + { 1, 208, 106 }, { 1, 208, 88 }, { 1, 156, 80 }, { 1, 156, 66 }, + { 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208, 88 }, +}; + +/* SDHI divisors */ +static const struct clk_div_table cpg_sdh_div_table[] = { + { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, + { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, + { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 }, +}; + +static const struct clk_div_table cpg_sd01_div_table[] = { + { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 }, + { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 }, +}; + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +static u32 cpg_mode __initdata; + +static struct clk * __init +rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, + const struct cpg_pll_config *config, + const char *name) +{ + const struct clk_div_table *table = NULL; + const char *parent_name = "main"; + unsigned int shift; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "main")) { + parent_name = of_clk_get_parent_name(np, 0); + div = config->extal_div; + } else if (!strcmp(name, "pll0")) { + /* PLL0 is a configurable multiplier clock. Register it as a + * fixed factor clock for now as there's no generic multiplier + * clock implementation and we currently have no need to change + * the multiplier value. + */ + u32 value = clk_readl(cpg->reg + CPG_PLL0CR); + mult = ((value >> 24) & ((1 << 7) - 1)) + 1; + } else if (!strcmp(name, "pll1")) { + mult = config->pll1_mult / 2; + } else if (!strcmp(name, "pll3")) { + mult = config->pll3_mult; + } else if (!strcmp(name, "lb")) { + div = cpg_mode & BIT(18) ? 36 : 24; + } else if (!strcmp(name, "qspi")) { + div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) + ? 16 : 20; + } else if (!strcmp(name, "sdh")) { + table = cpg_sdh_div_table; + shift = 8; + } else if (!strcmp(name, "sd0")) { + table = cpg_sd01_div_table; + shift = 4; + } else if (!strcmp(name, "sd1")) { + table = cpg_sd01_div_table; + shift = 0; + } else if (!strcmp(name, "z")) { + return cpg_z_clk_register(cpg); + } else { + return ERR_PTR(-EINVAL); + } + + if (!table) + return clk_register_fixed_factor(NULL, name, parent_name, 0, + mult, div); + else + return clk_register_divider_table(NULL, name, parent_name, 0, + cpg->reg + CPG_SDCKCR, shift, + 4, 0, table, &cpg->lock); +} + +static void __init rcar_gen2_cpg_clocks_init(struct device_node *np) +{ + const struct cpg_pll_config *config; + struct rcar_gen2_cpg *cpg; + struct clk **clks; + unsigned int i; + int num_clks; + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + pr_err("%s: failed to allocate cpg\n", __func__); + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + cpg->reg = of_iomap(np, 0); + if (WARN_ON(cpg->reg == NULL)) + return; + + config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)]; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = rcar_gen2_cpg_register_clock(np, cpg, config, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks", + rcar_gen2_cpg_clocks_init); + +void __init rcar_gen2_clocks_init(u32 mode) +{ + cpg_mode = mode; + + of_clk_init(NULL); +} diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 62b0de6a1837..48f76bc05da0 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -71,6 +71,10 @@ enum { MCT_L1_IRQ, MCT_L2_IRQ, MCT_L3_IRQ, + MCT_L4_IRQ, + MCT_L5_IRQ, + MCT_L6_IRQ, + MCT_L7_IRQ, MCT_NR_IRQS, }; diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 152a3f3875ee..a709cfa49d85 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> #include <linux/sched_clock.h> #include <asm/mach/time.h> @@ -103,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) return 0; } -void nmdk_clkevt_reset(void) +static void nmdk_clkevt_reset(void) { if (clkevt_periodic) { /* Timer: configure load and background-load, and fire it up */ @@ -144,7 +143,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } -void nmdk_clksrc_reset(void) +static void nmdk_clksrc_reset(void) { /* Disable */ writel(0, mtu_base + MTU_CR(0)); @@ -192,8 +191,8 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -static void __init __nmdk_timer_init(void __iomem *base, int irq, - struct clk *pclk, struct clk *clk) +static void __init nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; @@ -245,18 +244,6 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq, register_current_timer_delay(&mtu_delay_timer); } -void __init nmdk_timer_init(void __iomem *base, int irq) -{ - struct clk *clk0, *pclk0; - - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - - __nmdk_timer_init(base, irq, pclk0, clk0); -} - static void __init nmdk_timer_of_init(struct device_node *node) { struct clk *pclk; @@ -280,7 +267,7 @@ static void __init nmdk_timer_of_init(struct device_node *node) if (irq <= 0) panic("Can't parse IRQ"); - __nmdk_timer_init(base, irq, pclk, clk); + nmdk_timer_init(base, irq, pclk, clk); } CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", nmdk_timer_of_init); diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index b8c031b7de4e..00a2de957b23 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2409,6 +2409,7 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) +#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) @@ -2446,6 +2447,9 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, cfg.use_fixed_channel = true; } + if (D40_DT_FLAGS_HIGH_PRIO(flags)) + cfg.high_priority = true; + return dma_request_channel(cap, stedma40_filter, &cfg); } diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index cd2b1a1c9275..53a11114927f 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -4,7 +4,7 @@ * Copyright (C) 2008,2009 STMicroelectronics * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2011-2013 Linus Walleij <linus.walleij@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -33,7 +33,6 @@ #include <linux/pinctrl/pinconf.h> /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include "pinctrl-nomadik.h" #include "core.h" @@ -45,6 +44,221 @@ * Symbols in this file are called "nmk_gpio" for "nomadik gpio" */ +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) + * bit 23..25 - PDIS value (if input) + * bit 26 - Gpio mode + * bit 27 - Sleep mode + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE + +#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ +#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +#define PIN_SLPM_PDIS_SHIFT 23 +#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS(x) \ + (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) + +#define PIN_LOWEMI_SHIFT 25 +#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) + +#define PIN_GPIOMODE_SHIFT 26 +#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) + +#define PIN_SLEEPMODE_SHIFT 27 +#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) + + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +#define GPIO_BLOCK_SHIFT 5 +#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 +#define NMK_GPIO_LOWEMI 0x28 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 +/* These appear in DB8540 and later ASICs */ +#define NMK_GPIO_EDGELEVEL 0x5C +#define NMK_GPIO_LEVEL 0x60 + + +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, +}; + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; + int num_gpio; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); + bool supports_sleepmode; +}; + struct nmk_gpio_chip { struct gpio_chip chip; struct irq_domain *domain; @@ -1026,7 +1240,7 @@ static const struct irq_domain_ops nmk_gpio_irq_simple_ops = { static int nmk_gpio_probe(struct platform_device *dev) { - struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; + struct nmk_gpio_platform_data *pdata; struct device_node *np = dev->dev.of_node; struct nmk_gpio_chip *nmk_chip; struct gpio_chip *chip; @@ -1034,32 +1248,24 @@ static int nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; - int irq_start = 0; int irq; int ret; - if (!pdata && !np) { - dev_err(&dev->dev, "No platform data or device tree found\n"); - return -ENODEV; - } - - if (np) { - pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - if (of_get_property(np, "st,supports-sleepmode", NULL)) - pdata->supports_sleepmode = true; + pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; - if (of_property_read_u32(np, "gpio-bank", &dev->id)) { - dev_err(&dev->dev, "gpio-bank property not found\n"); - return -EINVAL; - } + if (of_get_property(np, "st,supports-sleepmode", NULL)) + pdata->supports_sleepmode = true; - pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; - pdata->num_gpio = NMK_GPIO_PER_CHIP; + if (of_property_read_u32(np, "gpio-bank", &dev->id)) { + dev_err(&dev->dev, "gpio-bank property not found\n"); + return -EINVAL; } + pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; + pdata->num_gpio = NMK_GPIO_PER_CHIP; + irq = platform_get_irq(dev, 0); if (irq < 0) return irq; @@ -1107,10 +1313,7 @@ static int nmk_gpio_probe(struct platform_device *dev) clk_enable(nmk_chip->clk); nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI); clk_disable(nmk_chip->clk); - -#ifdef CONFIG_OF_GPIO chip->of_node = np; -#endif ret = gpiochip_add(&nmk_chip->chip); if (ret) @@ -1122,10 +1325,8 @@ static int nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (!np) - irq_start = pdata->first_irq; nmk_chip->domain = irq_domain_add_simple(np, - NMK_GPIO_PER_CHIP, irq_start, + NMK_GPIO_PER_CHIP, 0, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); @@ -1858,11 +2059,10 @@ static int nmk_pinctrl_resume(struct platform_device *pdev) static int nmk_pinctrl_probe(struct platform_device *pdev) { - const struct platform_device_id *platid = platform_get_device_id(pdev); + const struct of_device_id *match; struct device_node *np = pdev->dev.of_node; struct device_node *prcm_np; struct nmk_pinctrl *npct; - struct resource *res; unsigned int version = 0; int i; @@ -1870,16 +2070,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev) if (!npct) return -ENOMEM; - if (platid) - version = platid->driver_data; - else if (np) { - const struct of_device_id *match; - - match = of_match_device(nmk_pinctrl_match, &pdev->dev); - if (!match) - return -ENODEV; - version = (unsigned int) match->data; - } + match = of_match_device(nmk_pinctrl_match, &pdev->dev); + if (!match) + return -ENODEV; + version = (unsigned int) match->data; /* Poke in other ASIC variants here */ if (version == PINCTRL_NMK_STN8815) @@ -1889,17 +2083,9 @@ static int nmk_pinctrl_probe(struct platform_device *pdev) if (version == PINCTRL_NMK_DB8540) nmk_pinctrl_db8540_init(&npct->soc); - if (np) { - prcm_np = of_parse_phandle(np, "prcm", 0); - if (prcm_np) - npct->prcm_base = of_iomap(prcm_np, 0); - } - - /* Allow platform passed information to over-write DT. */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) - npct->prcm_base = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + prcm_np = of_parse_phandle(np, "prcm", 0); + if (prcm_np) + npct->prcm_base = of_iomap(prcm_np, 0); if (!npct->prcm_base) { if (version == PINCTRL_NMK_STN8815) { dev_info(&pdev->dev, @@ -1958,13 +2144,6 @@ static struct platform_driver nmk_gpio_driver = { .probe = nmk_gpio_probe, }; -static const struct platform_device_id nmk_pinctrl_id[] = { - { "pinctrl-stn8815", PINCTRL_NMK_STN8815 }, - { "pinctrl-db8500", PINCTRL_NMK_DB8500 }, - { "pinctrl-db8540", PINCTRL_NMK_DB8540 }, - { } -}; - static struct platform_driver nmk_pinctrl_driver = { .driver = { .owner = THIS_MODULE, @@ -1972,7 +2151,6 @@ static struct platform_driver nmk_pinctrl_driver = { .of_match_table = nmk_pinctrl_match, }, .probe = nmk_pinctrl_probe, - .id_table = nmk_pinctrl_id, #ifdef CONFIG_PM .suspend = nmk_pinctrl_suspend, .resume = nmk_pinctrl_resume, diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h index bcd4191e10ea..d8215f1e70c7 100644 --- a/drivers/pinctrl/pinctrl-nomadik.h +++ b/drivers/pinctrl/pinctrl-nomadik.h @@ -1,13 +1,23 @@ #ifndef PINCTRL_PINCTRL_NOMADIK_H #define PINCTRL_PINCTRL_NOMADIK_H -#include <linux/platform_data/pinctrl-nomadik.h> - /* Package definitions */ #define PINCTRL_NMK_STN8815 0 #define PINCTRL_NMK_DB8500 1 #define PINCTRL_NMK_DB8540 2 +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +#define NMK_GPIO_ALT_CX_SHIFT 2 +#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) + #define PRCM_GPIOCR_ALTCX(pin_num,\ altc1_used, altc1_ri, altc1_cb,\ altc2_used, altc2_ri, altc2_cb,\ diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 420f0b00ae1e..859e9be511d9 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -22,6 +22,9 @@ #define R8A7790_CLK_SD1 8 #define R8A7790_CLK_Z 9 +/* MSTP0 */ +#define R8A7790_CLK_MSIOF0 0 + /* MSTP1 */ #define R8A7790_CLK_TMU1 11 #define R8A7790_CLK_TMU3 21 @@ -37,8 +40,11 @@ #define R8A7790_CLK_SCIFA2 2 #define R8A7790_CLK_SCIFA1 3 #define R8A7790_CLK_SCIFA0 4 +#define R8A7790_CLK_MSIOF2 5 #define R8A7790_CLK_SCIFB0 6 #define R8A7790_CLK_SCIFB1 7 +#define R8A7790_CLK_MSIOF1 8 +#define R8A7790_CLK_MSIOF3 15 #define R8A7790_CLK_SCIFB2 16 #define R8A7790_CLK_SYS_DMAC0 18 #define R8A7790_CLK_SYS_DMAC1 19 @@ -91,6 +97,7 @@ #define R8A7790_CLK_GPIO0 12 #define R8A7790_CLK_RCAN1 15 #define R8A7790_CLK_RCAN0 16 +#define R8A7790_CLK_QSPI_MOD 17 #define R8A7790_CLK_IICDVFS 26 #define R8A7790_CLK_I2C3 28 #define R8A7790_CLK_I2C2 29 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index df1715b77f96..30f82f286e29 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -21,6 +21,9 @@ #define R8A7791_CLK_SD0 7 #define R8A7791_CLK_Z 8 +/* MSTP0 */ +#define R8A7791_CLK_MSIOF0 0 + /* MSTP1 */ #define R8A7791_CLK_TMU1 11 #define R8A7791_CLK_TMU3 21 @@ -35,8 +38,10 @@ #define R8A7791_CLK_SCIFA2 2 #define R8A7791_CLK_SCIFA1 3 #define R8A7791_CLK_SCIFA0 4 +#define R8A7791_CLK_MSIOF2 5 #define R8A7791_CLK_SCIFB0 6 #define R8A7791_CLK_SCIFB1 7 +#define R8A7791_CLK_MSIOF1 8 #define R8A7791_CLK_SCIFB2 16 #define R8A7791_CLK_DMAC 18 @@ -89,6 +94,7 @@ #define R8A7791_CLK_GPIO0 12 #define R8A7791_CLK_RCAN1 15 #define R8A7791_CLK_RCAN0 16 +#define R8A7791_CLK_QSPI_MOD 17 #define R8A7791_CLK_I2C5 25 #define R8A7791_CLK_IICDVFS 26 #define R8A7791_CLK_I2C4 27 diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h index 4d179c00f081..197dc28b676e 100644 --- a/include/dt-bindings/gpio/tegra-gpio.h +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -43,6 +43,7 @@ #define TEGRA_GPIO_BANK_ID_CC 28 #define TEGRA_GPIO_BANK_ID_DD 29 #define TEGRA_GPIO_BANK_ID_EE 30 +#define TEGRA_GPIO_BANK_ID_FF 31 #define TEGRA_GPIO(bank, offset) \ ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h new file mode 100644 index 000000000000..ebafa498be0f --- /dev/null +++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h @@ -0,0 +1,45 @@ +/* + * This header provides constants for Tegra pinctrl bindings. + * + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H +#define _DT_BINDINGS_PINCTRL_TEGRA_H + +/* + * Enable/disable for diffeent dt properties. This is applicable for + * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain, + * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt. + */ +#define TEGRA_PIN_DISABLE 0 +#define TEGRA_PIN_ENABLE 1 + +#define TEGRA_PIN_PULL_NONE 0 +#define TEGRA_PIN_PULL_DOWN 1 +#define TEGRA_PIN_PULL_UP 2 + +/* Low power mode driver */ +#define TEGRA_PIN_LP_DRIVE_DIV_8 0 +#define TEGRA_PIN_LP_DRIVE_DIV_4 1 +#define TEGRA_PIN_LP_DRIVE_DIV_2 2 +#define TEGRA_PIN_LP_DRIVE_DIV_1 3 + +/* Rising/Falling slew rate */ +#define TEGRA_PIN_SLEW_RATE_FASTEST 0 +#define TEGRA_PIN_SLEW_RATE_FAST 1 +#define TEGRA_PIN_SLEW_RATE_SLOW 2 +#define TEGRA_PIN_SLEW_RATE_SLOWEST 3 + +#endif diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h new file mode 100644 index 000000000000..f9bf080a1123 --- /dev/null +++ b/include/linux/clk/shmobile.h @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_CLK_SHMOBILE_H_ +#define __LINUX_CLK_SHMOBILE_H_ + +#include <linux/types.h> + +void rcar_gen2_clocks_init(u32 mode); + +#endif diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h deleted file mode 100644 index 80088973b734..000000000000 --- a/include/linux/platform_data/clocksource-nomadik-mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base, int irq); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h deleted file mode 100644 index abf5bed84df3..000000000000 --- a/include/linux/platform_data/pinctrl-nomadik.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -#define GPIO_BLOCK_SHIFT 5 -#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 -/* These appear in DB8540 and later ASICs */ -#define NMK_GPIO_EDGELEVEL 0x5C -#define NMK_GPIO_LEVEL 0x60 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ |