summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHarini Katakam <harini.katakam@xilinx.com>2014-07-08 16:32:35 +0530
committerLinus Walleij <linus.walleij@linaro.org>2014-07-10 11:11:41 +0200
commit3242ba117e9bd29eb748afd6f6fbfbd6dd7cfe52 (patch)
treeac01c36057b3aa43eab356ede0d4f507e056d0fc
parent85ea29ac1c4838a720e6fcde2805ddb33451f21b (diff)
gpio: Add driver for Zynq GPIO controller
Add support for GPIO controller used by Xilinx Zynq. v3 changes: - Use linux/gpio/driver.h instead of linux/gpio.h - Make irq a local variable in probe v2 changes: - convert to pm_runtime_force_(suspend|resume) - add pm_runtime_set_active in probe() - also (un)prepare clocks when they are dis-/enabled - add some missing calls to pm_runtime_get() - use pm_runtime_put() instead of sync variant - remove gpio chip in driver remove() - remove redundant type casts - directly use IO helpers - use BIT macro to set/clear bits - migrate to GPIOLIB_IRQCHIP Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-zynq.c649
3 files changed, 657 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 690904a93fb4..345da63fb0ad 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -340,6 +340,13 @@ config GPIO_XILINX
help
Say yes here to support the Xilinx FPGA GPIO device
+config GPIO_ZYNQ
+ tristate "Xilinx Zynq GPIO support"
+ depends on ARCH_ZYNQ
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support Xilinx Zynq GPIO controller.
+
config GPIO_XTENSA
bool "Xtensa GPIO32 support"
depends on XTENSA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 09c5b5643bff..2881840843f0 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
+obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
new file mode 100644
index 000000000000..c0c53fdbf07d
--- /dev/null
+++ b/drivers/gpio/gpio-zynq.c
@@ -0,0 +1,649 @@
+/*
+ * Xilinx Zynq GPIO device driver
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option) any later
+ * version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define DRIVER_NAME "zynq-gpio"
+
+/* Maximum banks */
+#define ZYNQ_GPIO_MAX_BANK 4
+
+#define ZYNQ_GPIO_BANK0_NGPIO 32
+#define ZYNQ_GPIO_BANK1_NGPIO 22
+#define ZYNQ_GPIO_BANK2_NGPIO 32
+#define ZYNQ_GPIO_BANK3_NGPIO 32
+
+#define ZYNQ_GPIO_NR_GPIOS (ZYNQ_GPIO_BANK0_NGPIO + \
+ ZYNQ_GPIO_BANK1_NGPIO + \
+ ZYNQ_GPIO_BANK2_NGPIO + \
+ ZYNQ_GPIO_BANK3_NGPIO)
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
+ ZYNQ_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
+ ZYNQ_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
+ ZYNQ_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
+ ZYNQ_GPIO_BANK3_NGPIO - 1)
+
+
+/* Register offsets for the GPIO device */
+/* LSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_LSW_OFFSET(BANK) (0x000 + (8 * BANK))
+/* MSW Mask & Data -WO */
+#define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK))
+/* Data Register-RW */
+#define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK))
+/* Direction mode reg-RW */
+#define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK))
+/* Output enable reg-RW */
+#define ZYNQ_GPIO_OUTEN_OFFSET(BANK) (0x208 + (0x40 * BANK))
+/* Interrupt mask reg-RO */
+#define ZYNQ_GPIO_INTMASK_OFFSET(BANK) (0x20C + (0x40 * BANK))
+/* Interrupt enable reg-WO */
+#define ZYNQ_GPIO_INTEN_OFFSET(BANK) (0x210 + (0x40 * BANK))
+/* Interrupt disable reg-WO */
+#define ZYNQ_GPIO_INTDIS_OFFSET(BANK) (0x214 + (0x40 * BANK))
+/* Interrupt status reg-RO */
+#define ZYNQ_GPIO_INTSTS_OFFSET(BANK) (0x218 + (0x40 * BANK))
+/* Interrupt type reg-RW */
+#define ZYNQ_GPIO_INTTYPE_OFFSET(BANK) (0x21C + (0x40 * BANK))
+/* Interrupt polarity reg-RW */
+#define ZYNQ_GPIO_INTPOL_OFFSET(BANK) (0x220 + (0x40 * BANK))
+/* Interrupt on any, reg-RW */
+#define ZYNQ_GPIO_INTANY_OFFSET(BANK) (0x224 + (0x40 * BANK))
+
+/* Disable all interrupts mask */
+#define ZYNQ_GPIO_IXR_DISABLE_ALL 0xFFFFFFFF
+
+/* Mid pin number of a bank */
+#define ZYNQ_GPIO_MID_PIN_NUM 16
+
+/* GPIO upper 16 bit mask */
+#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
+
+/**
+ * struct zynq_gpio - gpio device private data structure
+ * @chip: instance of the gpio_chip
+ * @base_addr: base address of the GPIO device
+ * @clk: clock resource for this controller
+ */
+struct zynq_gpio {
+ struct gpio_chip chip;
+ void __iomem *base_addr;
+ struct clk *clk;
+};
+
+/**
+ * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank
+ * for a given pin in the GPIO device
+ * @pin_num: gpio pin number within the device
+ * @bank_num: an output parameter used to return the bank number of the gpio
+ * pin
+ * @bank_pin_num: an output parameter used to return pin number within a bank
+ * for the given gpio pin
+ *
+ * Returns the bank number and pin offset within the bank.
+ */
+static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
+ unsigned int *bank_num,
+ unsigned int *bank_pin_num)
+{
+ switch (pin_num) {
+ case ZYNQ_GPIO_BANK0_PIN_MIN ... ZYNQ_GPIO_BANK0_PIN_MAX:
+ *bank_num = 0;
+ *bank_pin_num = pin_num;
+ break;
+ case ZYNQ_GPIO_BANK1_PIN_MIN ... ZYNQ_GPIO_BANK1_PIN_MAX:
+ *bank_num = 1;
+ *bank_pin_num = pin_num - ZYNQ_GPIO_BANK1_PIN_MIN;
+ break;
+ case ZYNQ_GPIO_BANK2_PIN_MIN ... ZYNQ_GPIO_BANK2_PIN_MAX:
+ *bank_num = 2;
+ *bank_pin_num = pin_num - ZYNQ_GPIO_BANK2_PIN_MIN;
+ break;
+ case ZYNQ_GPIO_BANK3_PIN_MIN ... ZYNQ_GPIO_BANK3_PIN_MAX:
+ *bank_num = 3;
+ *bank_pin_num = pin_num - ZYNQ_GPIO_BANK3_PIN_MIN;
+ break;
+ default:
+ WARN(true, "invalid GPIO pin number: %u", pin_num);
+ *bank_num = 0;
+ *bank_pin_num = 0;
+ break;
+ }
+}
+
+/**
+ * zynq_gpio_get_value - Get the state of the specified pin of GPIO device
+ * @chip: gpio_chip instance to be worked on
+ * @pin: gpio pin number within the device
+ *
+ * This function reads the state of the specified pin of the GPIO device.
+ *
+ * Return: 0 if the pin is low, 1 if pin is high.
+ */
+static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin)
+{
+ u32 data;
+ unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
+
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+
+ data = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
+
+ return (data >> bank_pin_num) & 1;
+}
+
+/**
+ * zynq_gpio_set_value - Modify the state of the pin with specified value
+ * @chip: gpio_chip instance to be worked on
+ * @pin: gpio pin number within the device
+ * @state: value used to modify the state of the specified pin
+ *
+ * This function calculates the register offset (i.e to lower 16 bits or
+ * upper 16 bits) based on the given pin number and sets the state of a
+ * gpio pin to the specified value. The state is either 0 or non-zero.
+ */
+static void zynq_gpio_set_value(struct gpio_chip *chip, unsigned int pin,
+ int state)
+{
+ unsigned int reg_offset, bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
+
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+
+ if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
+ /* only 16 data bits in bit maskable reg */
+ bank_pin_num -= ZYNQ_GPIO_MID_PIN_NUM;
+ reg_offset = ZYNQ_GPIO_DATA_MSW_OFFSET(bank_num);
+ } else {
+ reg_offset = ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num);
+ }
+
+ /*
+ * get the 32 bit value to be written to the mask/data register where
+ * the upper 16 bits is the mask and lower 16 bits is the data
+ */
+ state = !!state;
+ state = ~(1 << (bank_pin_num + ZYNQ_GPIO_MID_PIN_NUM)) &
+ ((state << bank_pin_num) | ZYNQ_GPIO_UPPER_MASK);
+
+ writel_relaxed(state, gpio->base_addr + reg_offset);
+}
+
+/**
+ * zynq_gpio_dir_in - Set the direction of the specified GPIO pin as input
+ * @chip: gpio_chip instance to be worked on
+ * @pin: gpio pin number within the device
+ *
+ * This function uses the read-modify-write sequence to set the direction of
+ * the gpio pin as input.
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
+{
+ u32 reg;
+ unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
+
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+
+ /* bank 0 pins 7 and 8 are special and cannot be used as inputs */
+ if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
+ return -EINVAL;
+
+ /* clear the bit in direction mode reg to set the pin as input */
+ reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ reg &= ~BIT(bank_pin_num);
+ writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+
+ return 0;
+}
+
+/**
+ * zynq_gpio_dir_out - Set the direction of the specified GPIO pin as output
+ * @chip: gpio_chip instance to be worked on
+ * @pin: gpio pin number within the device
+ * @state: value to be written to specified pin
+ *
+ * This function sets the direction of specified GPIO pin as output, configures
+ * the Output Enable register for the pin and uses zynq_gpio_set to set
+ * the state of the pin to the value specified.
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_dir_out(struct gpio_chip *chip, unsigned int pin,
+ int state)
+{
+ u32 reg;
+ unsigned int bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = container_of(chip, struct zynq_gpio, chip);
+
+ zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num);
+
+ /* set the GPIO pin as output */
+ reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+ reg |= BIT(bank_pin_num);
+ writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
+
+ /* configure the output enable reg for the pin */
+ reg = readl_relaxed(gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+ reg |= BIT(bank_pin_num);
+ writel_relaxed(reg, gpio->base_addr + ZYNQ_GPIO_OUTEN_OFFSET(bank_num));
+
+ /* set the state of the pin */
+ zynq_gpio_set_value(chip, pin, state);
+ return 0;
+}
+
+/**
+ * zynq_gpio_irq_mask - Disable the interrupts for a gpio pin
+ * @irq_data: per irq and chip data passed down to chip functions
+ *
+ * This function calculates gpio pin number from irq number and sets the
+ * bit in the Interrupt Disable register of the corresponding bank to disable
+ * interrupts for that pin.
+ */
+static void zynq_gpio_irq_mask(struct irq_data *irq_data)
+{
+ unsigned int device_pin_num, bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
+
+ device_pin_num = irq_data->hwirq;
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ writel_relaxed(BIT(bank_pin_num),
+ gpio->base_addr + ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
+}
+
+/**
+ * zynq_gpio_irq_unmask - Enable the interrupts for a gpio pin
+ * @irq_data: irq data containing irq number of gpio pin for the interrupt
+ * to enable
+ *
+ * This function calculates the gpio pin number from irq number and sets the
+ * bit in the Interrupt Enable register of the corresponding bank to enable
+ * interrupts for that pin.
+ */
+static void zynq_gpio_irq_unmask(struct irq_data *irq_data)
+{
+ unsigned int device_pin_num, bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
+
+ device_pin_num = irq_data->hwirq;
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+ writel_relaxed(BIT(bank_pin_num),
+ gpio->base_addr + ZYNQ_GPIO_INTEN_OFFSET(bank_num));
+}
+
+/**
+ * zynq_gpio_set_irq_type - Set the irq type for a gpio pin
+ * @irq_data: irq data containing irq number of gpio pin
+ * @type: interrupt type that is to be set for the gpio pin
+ *
+ * This function gets the gpio pin number and its bank from the gpio pin number
+ * and configures the INT_TYPE, INT_POLARITY and INT_ANY registers.
+ *
+ * Return: 0, negative error otherwise.
+ * TYPE-EDGE_RISING, INT_TYPE - 1, INT_POLARITY - 1, INT_ANY - 0;
+ * TYPE-EDGE_FALLING, INT_TYPE - 1, INT_POLARITY - 0, INT_ANY - 0;
+ * TYPE-EDGE_BOTH, INT_TYPE - 1, INT_POLARITY - NA, INT_ANY - 1;
+ * TYPE-LEVEL_HIGH, INT_TYPE - 0, INT_POLARITY - 1, INT_ANY - NA;
+ * TYPE-LEVEL_LOW, INT_TYPE - 0, INT_POLARITY - 0, INT_ANY - NA
+ */
+static int zynq_gpio_set_irq_type(struct irq_data *irq_data, unsigned int type)
+{
+ u32 int_type, int_pol, int_any;
+ unsigned int device_pin_num, bank_num, bank_pin_num;
+ struct zynq_gpio *gpio = irq_data_get_irq_chip_data(irq_data);
+
+ device_pin_num = irq_data->hwirq;
+ zynq_gpio_get_bank_pin(device_pin_num, &bank_num, &bank_pin_num);
+
+ int_type = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+ int_pol = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+ int_any = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+
+ /*
+ * based on the type requested, configure the INT_TYPE, INT_POLARITY
+ * and INT_ANY registers
+ */
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ int_type |= BIT(bank_pin_num);
+ int_pol |= BIT(bank_pin_num);
+ int_any &= ~BIT(bank_pin_num);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ int_type |= BIT(bank_pin_num);
+ int_pol &= ~BIT(bank_pin_num);
+ int_any &= ~BIT(bank_pin_num);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ int_type |= BIT(bank_pin_num);
+ int_any |= BIT(bank_pin_num);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ int_type &= ~BIT(bank_pin_num);
+ int_pol |= BIT(bank_pin_num);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ int_type &= ~BIT(bank_pin_num);
+ int_pol &= ~BIT(bank_pin_num);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel_relaxed(int_type,
+ gpio->base_addr + ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
+ writel_relaxed(int_pol,
+ gpio->base_addr + ZYNQ_GPIO_INTPOL_OFFSET(bank_num));
+ writel_relaxed(int_any,
+ gpio->base_addr + ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+ return 0;
+}
+
+static int zynq_gpio_set_wake(struct irq_data *data, unsigned int on)
+{
+ if (on)
+ zynq_gpio_irq_unmask(data);
+ else
+ zynq_gpio_irq_mask(data);
+
+ return 0;
+}
+
+/* irq chip descriptor */
+static struct irq_chip zynq_gpio_irqchip = {
+ .name = DRIVER_NAME,
+ .irq_mask = zynq_gpio_irq_mask,
+ .irq_unmask = zynq_gpio_irq_unmask,
+ .irq_set_type = zynq_gpio_set_irq_type,
+ .irq_set_wake = zynq_gpio_set_wake,
+};
+
+/**
+ * zynq_gpio_irqhandler - IRQ handler for the gpio banks of a gpio device
+ * @irq: irq number of the gpio bank where interrupt has occurred
+ * @desc: irq descriptor instance of the 'irq'
+ *
+ * This function reads the Interrupt Status Register of each bank to get the
+ * gpio pin number which has triggered an interrupt. It then acks the triggered
+ * interrupt and calls the pin specific handler set by the higher layer
+ * application for that pin.
+ * Note: A bug is reported if no handler is set for the gpio pin.
+ */
+static void zynq_gpio_irqhandler(unsigned int irq, struct irq_desc *desc)
+{
+ u32 int_sts, int_enb;
+ unsigned int bank_num;
+ struct zynq_gpio *gpio = irq_get_handler_data(irq);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(irqchip, desc);
+
+ for (bank_num = 0; bank_num < ZYNQ_GPIO_MAX_BANK; bank_num++) {
+ int_sts = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
+ int_enb = readl_relaxed(gpio->base_addr +
+ ZYNQ_GPIO_INTMASK_OFFSET(bank_num));
+ int_sts &= ~int_enb;
+ if (int_sts) {
+ int offset;
+ unsigned long pending = int_sts;
+
+ for_each_set_bit(offset, &pending, 32) {
+ unsigned int gpio_irq =
+ irq_find_mapping(gpio->chip.irqdomain,
+ offset);
+ generic_handle_irq(gpio_irq);
+ }
+
+ /* clear IRQ in HW */
+ writel_relaxed(int_sts, gpio->base_addr +
+ ZYNQ_GPIO_INTSTS_OFFSET(bank_num));
+ }
+ }
+
+ chained_irq_exit(irqchip, desc);
+}
+
+static int __maybe_unused zynq_gpio_suspend(struct device *dev)
+{
+ if (!device_may_wakeup(dev))
+ return pm_runtime_force_suspend(dev);
+
+ return 0;
+}
+
+static int __maybe_unused zynq_gpio_resume(struct device *dev)
+{
+ if (!device_may_wakeup(dev))
+ return pm_runtime_force_resume(dev);
+
+ return 0;
+}
+
+static int __maybe_unused zynq_gpio_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(gpio->clk);
+
+ return 0;
+}
+
+static int __maybe_unused zynq_gpio_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+
+ return clk_prepare_enable(gpio->clk);
+}
+
+static int zynq_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ int ret;
+
+ ret = pm_runtime_get_sync(chip->dev);
+
+ /*
+ * If the device is already active pm_runtime_get() will return 1 on
+ * success, but gpio_request still needs to return 0.
+ */
+ return ret < 0 ? ret : 0;
+}
+
+static void zynq_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ pm_runtime_put(chip->dev);
+}
+
+static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(zynq_gpio_suspend, zynq_gpio_resume)
+ SET_PM_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend,
+ zynq_gpio_runtime_resume, NULL)
+};
+
+/**
+ * zynq_gpio_probe - Initialization method for a zynq_gpio device
+ * @pdev: platform device instance
+ *
+ * This function allocates memory resources for the gpio device and registers
+ * all the banks of the device. It will also set up interrupts for the gpio
+ * pins.
+ * Note: Interrupts are disabled for all the banks during initialization.
+ *
+ * Return: 0 on success, negative error otherwise.
+ */
+static int zynq_gpio_probe(struct platform_device *pdev)
+{
+ int ret, bank_num, irq;
+ struct zynq_gpio *gpio;
+ struct gpio_chip *chip;
+ struct resource *res;
+
+ gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, gpio);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gpio->base_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gpio->base_addr))
+ return PTR_ERR(gpio->base_addr);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "invalid IRQ\n");
+ return irq;
+ }
+
+ /* configure the gpio chip */
+ chip = &gpio->chip;
+ chip->label = "zynq_gpio";
+ chip->owner = THIS_MODULE;
+ chip->dev = &pdev->dev;
+ chip->get = zynq_gpio_get_value;
+ chip->set = zynq_gpio_set_value;
+ chip->request = zynq_gpio_request;
+ chip->free = zynq_gpio_free;
+ chip->direction_input = zynq_gpio_dir_in;
+ chip->direction_output = zynq_gpio_dir_out;
+ chip->base = -1;
+ chip->ngpio = ZYNQ_GPIO_NR_GPIOS;
+
+ /* Enable GPIO clock */
+ gpio->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(gpio->clk)) {
+ dev_err(&pdev->dev, "input clock not found.\n");
+ return PTR_ERR(gpio->clk);
+ }
+ ret = clk_prepare_enable(gpio->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+
+ /* report a bug if gpio chip registration fails */
+ ret = gpiochip_add(chip);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add gpio chip\n");
+ goto err_disable_clk;
+ }
+
+ /* disable interrupts for all banks */
+ for (bank_num = 0; bank_num < ZYNQ_GPIO_MAX_BANK; bank_num++)
+ writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
+ ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
+
+ ret = gpiochip_irqchip_add(chip, &zynq_gpio_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add irq chip\n");
+ goto err_rm_gpiochip;
+ }
+
+ gpiochip_set_chained_irqchip(chip, &zynq_gpio_irqchip, irq,
+ zynq_gpio_irqhandler);
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ device_set_wakeup_capable(&pdev->dev, 1);
+
+ return 0;
+
+err_rm_gpiochip:
+ if (gpiochip_remove(chip))
+ dev_err(&pdev->dev, "Failed to remove gpio chip\n");
+err_disable_clk:
+ clk_disable_unprepare(gpio->clk);
+
+ return ret;
+}
+
+/**
+ * zynq_gpio_remove - Driver removal function
+ * @pdev: platform device instance
+ *
+ * Return: 0 always
+ */
+static int zynq_gpio_remove(struct platform_device *pdev)
+{
+ int ret;
+ struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ ret = gpiochip_remove(&gpio->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to remove gpio chip\n");
+ return ret;
+ }
+ clk_disable_unprepare(gpio->clk);
+ device_set_wakeup_capable(&pdev->dev, 0);
+ return 0;
+}
+
+static struct of_device_id zynq_gpio_of_match[] = {
+ { .compatible = "xlnx,zynq-gpio-1.0", },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, zynq_gpio_of_match);
+
+static struct platform_driver zynq_gpio_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = &zynq_gpio_dev_pm_ops,
+ .of_match_table = zynq_gpio_of_match,
+ },
+ .probe = zynq_gpio_probe,
+ .remove = zynq_gpio_remove,
+};
+
+/**
+ * zynq_gpio_init - Initial driver registration call
+ *
+ * Return: value from platform_driver_register
+ */
+static int __init zynq_gpio_init(void)
+{
+ return platform_driver_register(&zynq_gpio_driver);
+}
+postcore_initcall(zynq_gpio_init);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Zynq GPIO driver");
+MODULE_LICENSE("GPL");