summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNicolas Ferre <nicolas.ferre@atmel.com>2014-11-21 14:30:13 +0100
committerNicolas Ferre <nicolas.ferre@atmel.com>2014-11-21 17:35:14 +0100
commit37a0186fdef963a5345dc076d32779147acfa6cb (patch)
tree1b9ad4380f76d6130a6712aa30a06a6284daafcd
parent4fdfb67f24b64844ac110622bb51b2ee0f894492 (diff)
ARM: at91: remove at91rm9200 legacy boards files
Remove old board files that use at91rm9200 Atmel SoC. The device tree is mature on this SoCs. It must be used now. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
-rw-r--r--arch/arm/mach-at91/Makefile15
-rw-r--r--arch/arm/mach-at91/board-1arm.c99
-rw-r--r--arch/arm/mach-at91/board-carmeva.c167
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c189
-rw-r--r--arch/arm/mach-at91/board-csb337.c260
-rw-r--r--arch/arm/mach-at91/board-csb637.c142
-rw-r--r--arch/arm/mach-at91/board-eb9200.c126
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c191
-rw-r--r--arch/arm/mach-at91/board-eco920.c160
-rw-r--r--arch/arm/mach-at91/board-kafa.c113
-rw-r--r--arch/arm/mach-at91/board-kb9202.c159
-rw-r--r--arch/arm/mach-at91/board-picotux200.c129
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c196
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c597
14 files changed, 0 insertions, 2543 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2495d71f7ac..016d9a126eb9 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -22,21 +22,6 @@ obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
-obj-$(CONFIG_MACH_CSB337) += board-csb337.o
-obj-$(CONFIG_MACH_CSB637) += board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
-obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
-obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
-obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
-obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
-obj-$(CONFIG_MACH_ECO920) += board-eco920.o
-
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
deleted file mode 100644
index 3f6dbcc34022..000000000000
--- a/arch/arm/mach-at91/board-1arm.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-1arm.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init onearm_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata onearm_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
- .vbus_pin = AT91_PIN_PC2,
- .pullup_pin = AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&onearm_eth_data);
- /* USB Host */
- at91_add_device_usbh(&onearm_usbh_data);
- /* USB Device */
- at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = onearm_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = onearm_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
deleted file mode 100644
index 47313d3ee037..000000000000
--- a/arch/arm/mach-at91/board-carmeva.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-carmeva.c
- *
- * Copyright (c) 2005 Peer Georgi
- * Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init carmeva_init_early(void)
-{
- /* Initialize processor: 20.000 MHz crystal */
- at91_initialize(20000000);
-}
-
-static struct macb_platform_data __initdata carmeva_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
- .vbus_pin = AT91_PIN_PD12,
- .pullup_pin = AT91_PIN_PD9,
-};
-
-/* FIXME: user dependent */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-// .det_pin = AT91_PIN_PB0,
-// .rst_pin = AT91_PIN_PC5,
- // .irq_pin = -EINVAL,
- // .vcc_pin = -EINVAL,
-// };
-
-static struct mci_platform_data __initdata carmeva_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB10,
- .wp_pin = AT91_PIN_PC14,
- },
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- },
- { /* User accessible spi - cs1 (250KHz) */
- .modalias = "spi-cs1",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* User accessible spi - cs2 (1MHz) */
- .modalias = "spi-cs2",
- .chip_select = 2,
- .max_speed_hz = 1 * 1000 * 1000,
- },
- { /* User accessible spi - cs3 (10MHz) */
- .modalias = "spi-cs3",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- },
-};
-
-static struct gpio_led carmeva_leds[] = {
- { /* "user led 1", LED9 */
- .name = "led9",
- .gpio = AT91_PIN_PA21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 2", LED10 */
- .name = "led10",
- .gpio = AT91_PIN_PA25,
- .active_low = 1,
- },
- { /* "user led 3", LED11 */
- .name = "led11",
- .gpio = AT91_PIN_PA26,
- .active_low = 1,
- },
- { /* "user led 4", LED12 */
- .name = "led12",
- .gpio = AT91_PIN_PA18,
- .active_low = 1,
- }
-};
-
-static void __init carmeva_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&carmeva_eth_data);
- /* USB Host */
- at91_add_device_usbh(&carmeva_usbh_data);
- /* USB Device */
- at91_add_device_udc(&carmeva_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
- /* Compact Flash */
-// at91_add_device_cf(&carmeva_cf_data);
- /* MMC */
- at91_add_device_mci(0, &carmeva_mci0_data);
- /* LEDs */
- at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
- /* Maintainer: Conitec Datasystems */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = carmeva_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = carmeva_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
deleted file mode 100644
index c094350c9314..000000000000
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cpuat91.c
- *
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static struct gpio_led cpuat91_leds[] = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = AT91_PIN_PC0,
- },
-};
-
-static void __init cpuat91_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata cpuat91_eth_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata cpuat91_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata cpuat91_udc_data = {
- .vbus_pin = AT91_PIN_PC15,
- .pullup_pin = AT91_PIN_PC14,
-};
-
-static struct mci_platform_data __initdata cpuat91_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC2,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct physmap_flash_data cpuat91_flash_data = {
- .width = 2,
-};
-
-static struct resource cpuat91_flash_resource = {
- .start = AT91_CHIPSELECT_0,
- .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device cpuat91_norflash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cpuat91_flash_data,
- },
- .resource = &cpuat91_flash_resource,
- .num_resources = 1,
-};
-
-#ifdef CONFIG_MTD_PLATRAM
-struct platdata_mtd_ram at91_sram_pdata = {
- .mapname = "SRAM",
- .bankwidth = 2,
-};
-
-static struct resource at91_sram_resource[] = {
- [0] = {
- .start = AT91RM9200_SRAM_BASE,
- .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device at91_sram = {
- .name = "mtd-ram",
- .id = 0,
- .resource = at91_sram_resource,
- .num_resources = ARRAY_SIZE(at91_sram_resource),
- .dev = {
- .platform_data = &at91_sram_pdata,
- },
-};
-#endif /* MTD_PLATRAM */
-
-static struct platform_device *platform_devices[] __initdata = {
- &cpuat91_norflash,
-#ifdef CONFIG_MTD_PLATRAM
- &at91_sram,
-#endif /* CONFIG_MTD_PLATRAM */
-};
-
-static void __init cpuat91_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
- /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
- at91_add_device_serial();
- /* LEDs. */
- at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
- /* Ethernet */
- at91_add_device_eth(&cpuat91_eth_data);
- /* USB Host */
- at91_add_device_usbh(&cpuat91_usbh_data);
- /* USB Device */
- at91_add_device_udc(&cpuat91_udc_data);
- /* MMC */
- at91_add_device_mci(0, &cpuat91_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-MACHINE_START(CPUAT91, "Eukrea")
- /* Maintainer: Eric Benard - EUKREA Electromatique */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cpuat91_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cpuat91_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
deleted file mode 100644
index 0e35a45cf8d4..000000000000
--- a/arch/arm/mach-at91/board-csb337.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb337.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init csb337_init_early(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb337_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 0,
- /* The CSB337 bootloader stores the MAC the wrong-way around */
- .rev_eth_addr = 1,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
- .pullup_pin = AT91_PIN_PA24,
- .vbus_pin = -EINVAL,
-};
-
-static struct i2c_board_info __initdata csb337_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1307", 0x68),
- },
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
- /*
- * connector P4 on the CSB 337 mates to
- * connector P8 on the CSB 300CF
- */
-
- /* CSB337 specific */
- .det_pin = AT91_PIN_PC3,
-
- /* CSB300CF specific */
- .irq_pin = AT91_PIN_PA19,
- .vcc_pin = AT91_PIN_PD0,
- .rst_pin = AT91_PIN_PD2,
-};
-
-static struct mci_platform_data __initdata csb337_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD5,
- .wp_pin = AT91_PIN_PD6,
- },
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
- { /* CAN controller */
- .modalias = "sak82c900",
- .chip_select = 0,
- .max_speed_hz = 6 * 1000 * 1000,
- },
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_8M
-
-static struct mtd_partition csb_flash_partitions[] = {
- {
- .name = "uMON flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* read only */
- }
-};
-
-static struct physmap_flash_data csb_flash_data = {
- .width = 2,
- .parts = csb_flash_partitions,
- .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
- {
- .start = CSB_FLASH_BASE,
- .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device csb_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &csb_flash_data,
- },
- .resource = csb_flash_resources,
- .num_resources = ARRAY_SIZE(csb_flash_resources),
-};
-
-/*
- * GPIO Buttons (on CSB300)
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button csb300_buttons[] = {
- {
- .gpio = AT91_PIN_PB29,
- .code = BTN_0,
- .desc = "sw0",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB28,
- .code = BTN_1,
- .desc = "sw1",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA21,
- .code = BTN_2,
- .desc = "sw2",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data csb300_button_data = {
- .buttons = csb300_buttons,
- .nbuttons = ARRAY_SIZE(csb300_buttons),
-};
-
-static struct platform_device csb300_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &csb300_button_data,
- }
-};
-
-static void __init csb300_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
- at91_set_deglitch(AT91_PIN_PB29, 1);
- at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
- at91_set_deglitch(AT91_PIN_PB28, 1);
- at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
- at91_set_deglitch(AT91_PIN_PA21, 1);
-
- platform_device_register(&csb300_button_device);
-}
-#else
-static void __init csb300_add_device_buttons(void) {}
-#endif
-
-static struct gpio_led csb_leds[] = {
- { /* "led0", yellow */
- .name = "led0",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "led1", green */
- .name = "led1",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "led2", yellow */
- .name = "led2",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "ide-disk",
- }
-};
-
-
-static void __init csb337_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0 */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb337_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb337_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb337_udc_data);
- /* I2C */
- at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
- /* Compact Flash */
- at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
- at91_add_device_cf(&csb337_cf_data);
- /* SPI */
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &csb337_mci0_data);
- /* NOR flash */
- platform_device_register(&csb_flash);
- /* LEDs */
- at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- /* Switches on CSB300 */
- csb300_add_device_buttons();
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
- /* Maintainer: Bill Gatliff */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = csb337_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = csb337_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
deleted file mode 100644
index 18d027f529a8..000000000000
--- a/arch/arm/mach-at91/board-csb637.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb637.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init csb637_init_early(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb637_eth_data = {
- .phy_irq_pin = AT91_PIN_PC0,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
- .vbus_pin = AT91_PIN_PB28,
- .pullup_pin = AT91_PIN_PB1,
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_16M
-
-static struct mtd_partition csb_flash_partitions[] = {
- {
- .name = "uMON flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* read only */
- }
-};
-
-static struct physmap_flash_data csb_flash_data = {
- .width = 2,
- .parts = csb_flash_partitions,
- .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
- {
- .start = CSB_FLASH_BASE,
- .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device csb_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &csb_flash_data,
- },
- .resource = csb_flash_resources,
- .num_resources = ARRAY_SIZE(csb_flash_resources),
-};
-
-static struct gpio_led csb_leds[] = {
- { /* "d1", red */
- .name = "d1",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static void __init csb637_board_init(void)
-{
- /* LED(s) */
- at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb637_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb637_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb637_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* NOR flash */
- platform_device_register(&csb_flash);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
- /* Maintainer: Bill Gatliff */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = csb637_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = csb637_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
deleted file mode 100644
index aa457a8b22f5..000000000000
--- a/arch/arm/mach-at91/board-eb9200.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-eb9200.c
- *
- * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- * by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eb9200_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eb9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
- .irq_pin = -EINVAL,
- .det_pin = AT91_PIN_PB0,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PC5,
-};
-
-static struct mci_platform_data __initdata eb9200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- },
-};
-
-
-static void __init eb9200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&eb9200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&eb9200_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb9200_udc_data);
- /* I2C */
- at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
- /* Compact Flash */
- at91_add_device_cf(&eb9200_cf_data);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* MMC */
- /* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mci(0, &eb9200_mci0_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = eb9200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = eb9200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
deleted file mode 100644
index ede1373ccaba..000000000000
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
- * Copyright (C) 2007 emQbit.com.
- *
- * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ecb_at91init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ecb_at91eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata ecb_at91usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata ecbat91_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata my_flash0_partitions[] =
-{
- { /* 0x8400 */
- .name = "Darrell-loader",
- .offset = 0,
- .size = 12 * 1056,
- },
- {
- .name = "U-boot",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 110 * 1056,
- },
- { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
- .name = "UBoot-env",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 8 * 1056,
- },
- { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 1534 * 1056,
- },
- { /* 190200 - jffs2 root filesystem */
- .name = "Filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL, /* 26 sectors */
- }
-};
-
-static struct flash_platform_data __initdata my_flash0_platform = {
- .name = "Removable flash card",
- .parts = my_flash0_partitions,
- .nr_parts = ARRAY_SIZE(my_flash0_partitions)
-};
-
-#endif
-
-static struct spi_board_info __initdata ecb_at91spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
-#if defined(CONFIG_MTD_DATAFLASH)
- .platform_data = &my_flash0_platform,
-#endif
- },
- { /* User accessible spi - cs1 (250KHz) */
- .modalias = "spi-cs1",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* User accessible spi - cs2 (1MHz) */
- .modalias = "spi-cs2",
- .chip_select = 2,
- .max_speed_hz = 1 * 1000 * 1000,
- },
- { /* User accessible spi - cs3 (10MHz) */
- .modalias = "spi-cs3",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led ecb_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ecb_at91board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
- at91_add_device_serial();
-
- /* Ethernet */
- at91_add_device_eth(&ecb_at91eth_data);
-
- /* USB Host */
- at91_add_device_usbh(&ecb_at91usbh_data);
-
- /* I2C */
- at91_add_device_i2c(NULL, 0);
-
- /* MMC */
- at91_add_device_mci(0, &ecbat91_mci0_data);
-
- /* SPI */
- at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-
- /* LEDs */
- at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
-}
-
-MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
- /* Maintainer: emQbit.com */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ecb_at91init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ecb_at91board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644
index 4e75321a8f2a..000000000000
--- a/arch/arm/mach-at91/board-eco920.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eco920_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
- .vbus_pin = AT91_PIN_PB12,
- .pullup_pin = AT91_PIN_PB13,
-};
-
-static struct mci_platform_data __initdata eco920_mci0_data = {
- .slot[0] = {
- .bus_width = 1,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct physmap_flash_data eco920_flash_data = {
- .width = 2,
-};
-
-static struct resource eco920_flash_resource = {
- .start = 0x11000000,
- .end = 0x11ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &eco920_flash_data,
- },
- .resource = &eco920_flash_resource,
- .num_resources = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
- { /* CAN controller */
- .modalias = "tlv5638",
- .chip_select = 3,
- .max_speed_hz = 20 * 1000 * 1000,
- .mode = SPI_CPHA,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led eco920_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init eco920_board_init(void)
-{
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- at91_add_device_eth(&eco920_eth_data);
- at91_add_device_usbh(&eco920_usbh_data);
- at91_add_device_udc(&eco920_udc_data);
-
- at91_add_device_mci(0, &eco920_mci0_data);
- platform_device_register(&eco920_flash);
-
- at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
- | AT91_SMC_RWSETUP_(1)
- | AT91_SMC_DBW_8
- | AT91_SMC_WSEN
- | AT91_SMC_NWS_(15));
-
- at91_set_A_periph(AT91_PIN_PC6, 1);
-
- at91_set_gpio_input(AT91_PIN_PA23, 0);
- at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
- at91_ramc_write(0, AT91_SMC_CSR(3),
- AT91_SMC_DBW_16 | /* 16 bit */
- AT91_SMC_WSEN |
- AT91_SMC_NWS_(5) | /* wait states */
- AT91_SMC_TDF_(1) /* float time */
- );
-
- at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
- /* LEDs */
- at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
-}
-
-MACHINE_START(ECO920, "eco920")
- /* Maintainer: Sascha Hauer */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = eco920_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = eco920_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
deleted file mode 100644
index 93b1df42f639..000000000000
--- a/arch/arm/mach-at91/board-kafa.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kafa.c
- *
- * Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kafa_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata kafa_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
- .vbus_pin = AT91_PIN_PB6,
- .pullup_pin = AT91_PIN_PB7,
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kafa_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PB4,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static void __init kafa_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kafa_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kafa_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kafa_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* LEDs */
- at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
- /* Maintainer: Sergei Sharonov */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = kafa_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = kafa_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
deleted file mode 100644
index d58d36225e08..000000000000
--- a/arch/arm/mach-at91/board-kb9202.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kb9202.c
- *
- * Copyright (c) 2005 kb_admin
- * KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kb9202_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 10 MHz crystal */
- at91_initialize(10000000);
-}
-
-static struct macb_platform_data __initdata kb9202_eth_data = {
- .phy_irq_pin = AT91_PIN_PB29,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
- .vbus_pin = AT91_PIN_PB24,
- .pullup_pin = AT91_PIN_PB22,
-};
-
-static struct mci_platform_data __initdata kb9202_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB2,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
- {
- .name = "nand_fs",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata kb9202_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC29,
- .enable_pin = AT91_PIN_PC28,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = kb9202_nand_partition,
- .num_parts = ARRAY_SIZE(kb9202_nand_partition),
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kb9202_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PC19,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PC18,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init kb9202_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
- /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kb9202_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kb9202_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kb9202_udc_data);
- /* MMC */
- at91_add_device_mci(0, &kb9202_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
- /* LEDs */
- at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
-}
-
-MACHINE_START(KB9200, "KB920x")
- /* Maintainer: KwikByte, Inc. */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = kb9202_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = kb9202_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
deleted file mode 100644
index 2c0f2d554d84..000000000000
--- a/arch/arm/mach-at91/board-picotux200.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-picotux200.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Kleinhenz Elektronik GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init picotux200_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata picotux200_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata picotux200_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata picotux200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PA17,
- },
-};
-
-#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE SZ_4M
-
-static struct physmap_flash_data picotux200_flash_data = {
- .width = 2,
-};
-
-static struct resource picotux200_flash_resource = {
- .start = PICOTUX200_FLASH_BASE,
- .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device picotux200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &picotux200_flash_data,
- },
- .resource = &picotux200_flash_resource,
- .num_resources = 1,
-};
-
-static void __init picotux200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&picotux200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&picotux200_usbh_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mci(0, &picotux200_mci0_data);
- /* NOR Flash */
- platform_device_register(&picotux200_flash);
-}
-
-MACHINE_START(PICOTUX2XX, "picotux 200")
- /* Maintainer: Kleinhenz Elektronik GmbH */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = picotux200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = picotux200_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
deleted file mode 100644
index 953cea416754..000000000000
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200ek.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PA17,
- }
-};
-#endif
-
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("dac3550", 0x4d),
- }
-};
-
-#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE SZ_8M
-
-static struct physmap_flash_data ek_flash_data = {
- .width = 2,
-};
-
-static struct resource ek_flash_resource = {
- .start = EK_FLASH_BASE,
- .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ek_flash_data,
- },
- .resource = &ek_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led ek_leds[] = {
- { /* "user led 1", DS2 */
- .name = "green",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "user led 2", DS4 */
- .name = "yellow",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 3", DS6 */
- .name = "red",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&ek_eth_data);
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mci(0, &ek_mci0_data);
-#endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
-// ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
- /* Maintainer: SAN People/Atmel */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
deleted file mode 100644
index 46fdb0c68a68..000000000000
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-yl-9200.c
- *
- * Adapted from various board files in arch/arm/mach-at91
- *
- * Modifications for YL-9200 platform:
- * Copyright (C) 2007 S. Birtles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init yl9200_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led yl9200_leds[] = {
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PB17,
- .active_low = 1,
- .default_trigger = "timer",
- },
- { /* D3 */
- .name = "led3",
- .gpio = AT91_PIN_PB16,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D4 */
- .name = "led4",
- .gpio = AT91_PIN_PB15,
- .active_low = 1,
- },
- { /* D5 */
- .name = "led5",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- }
-};
-
-/*
- * Ethernet
- */
-static struct macb_platform_data __initdata yl9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PB28,
- .is_rmii = 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata yl9200_usbh_data = {
- .ports = 1, /* PQFP version of AT91RM9200 */
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device
- */
-static struct at91_udc_data __initdata yl9200_udc_data = {
- .pullup_pin = AT91_PIN_PC4,
- .vbus_pin = AT91_PIN_PC5,
- .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
-
-};
-
-/*
- * MMC
- */
-static struct mci_platform_data __initdata yl9200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB9,
- .wp_pin = -EINVAL,
- },
-};
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata yl9200_nand_partition[] = {
- {
- .name = "AT91 NAND partition 1, boot",
- .offset = 0,
- .size = SZ_256K
- },
- {
- .name = "AT91 NAND partition 2, kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = (2 * SZ_1M) - SZ_256K
- },
- {
- .name = "AT91 NAND partition 3, filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 14 * SZ_1M
- },
- {
- .name = "AT91 NAND partition 4, storage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_16M
- },
- {
- .name = "AT91 NAND partition 5, ext-fs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_32M
- }
-};
-
-static struct atmel_nand_data __initdata yl9200_nand_data = {
- .ale = 6,
- .cle = 7,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
- .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .ecc_mode = NAND_ECC_SOFT,
- .parts = yl9200_nand_partition,
- .num_parts = ARRAY_SIZE(yl9200_nand_partition),
-};
-
-/*
- * NOR Flash
- */
-#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE SZ_16M
-
-static struct mtd_partition yl9200_flash_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = (2 * SZ_1M) - SZ_256K
- },
- {
- .name = "Filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- }
-};
-
-static struct physmap_flash_data yl9200_flash_data = {
- .width = 2,
- .parts = yl9200_flash_partitions,
- .nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
-};
-
-static struct resource yl9200_flash_resources[] = {
- {
- .start = YL9200_FLASH_BASE,
- .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device yl9200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &yl9200_flash_data,
- },
- .resource = yl9200_flash_resources,
- .num_resources = ARRAY_SIZE(yl9200_flash_resources),
-};
-
-/*
- * I2C (TWI)
- */
-static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
- { /* EEPROM */
- I2C_BOARD_INFO("24c128", 0x50),
- }
-};
-
-/*
- * GPIO Buttons
-*/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl9200_buttons[] = {
- {
- .gpio = AT91_PIN_PA24,
- .code = BTN_2,
- .desc = "SW2",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB1,
- .code = BTN_3,
- .desc = "SW3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB2,
- .code = BTN_4,
- .desc = "SW4",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB6,
- .code = BTN_5,
- .desc = "SW5",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data yl9200_button_data = {
- .buttons = yl9200_buttons,
- .nbuttons = ARRAY_SIZE(yl9200_buttons),
-};
-
-static struct platform_device yl9200_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &yl9200_button_data,
- }
-};
-
-static void __init yl9200_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
- at91_set_deglitch(AT91_PIN_PA24, 1);
- at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
- at91_set_deglitch(AT91_PIN_PB1, 1);
- at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
- at91_set_deglitch(AT91_PIN_PB2, 1);
- at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
- at91_set_deglitch(AT91_PIN_PB6, 1);
-
- /* Enable buttons (Sheet 5) */
- at91_set_gpio_output(AT91_PIN_PB7, 1);
-
- platform_device_register(&yl9200_button_device);
-}
-#else
-static void __init yl9200_add_device_buttons(void) {}
-#endif
-
-/*
- * Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
-
- /* For a 8" touch-screen */
- // .x_plate_ohms = 603,
- // .y_plate_ohms = 332,
-
- /* For a 10.4" touch-screen */
- // .x_plate_ohms = 611,
- // .y_plate_ohms = 325,
-
- .x_plate_ohms = 576,
- .y_plate_ohms = 366,
-
- .pressure_max = 15000, /* generally nonsense on the 7843 */
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init yl9200_add_device_ts(void)
-{
- at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
- at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
-}
-#else
-static void __init yl9200_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info yl9200_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- { /* Touchscreen */
- .modalias = "ads7846",
- .chip_select = 0,
- .max_speed_hz = 5000 * 26,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PB11,
- },
-#endif
- { /* CAN */
- .modalias = "mcp2510",
- .chip_select = 1,
- .max_speed_hz = 25000 * 26,
- .irq = AT91_PIN_PC0,
- }
-};
-
-/*
- * LCD / VGA
- *
- * EPSON S1D13806 FB (discontinued chip)
- * EPSON S1D13506 FB
- */
-#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-#include <video/s1d13xxxfb.h>
-
-
-static void yl9200_init_video(void)
-{
- /* NWAIT Signal */
- at91_set_A_periph(AT91_PIN_PC6, 0);
-
- /* Initialization of the Static Memory Controller for Chip Select 2 */
- at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
- | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
- | AT91_SMC_TDF_(0x100) /* float time */
- );
-}
-
-static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
-{
- {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
- {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
- {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
- {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
- {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
- {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
- {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
- {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
- {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
- {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
- {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
- {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
- {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
- {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
- {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
- {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
- {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
- {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
- {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
- {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
- {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
- {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
- {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
- {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
- {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
- {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
- {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
- {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
- {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
- {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
- {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
- {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
- {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
- {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
- {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
- {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
- {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
- {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
- {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
- {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
- {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
- {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
- {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
- {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
- {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
- {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
- {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
- {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
- {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
- {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
- {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
- {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
- {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
- {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
- {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
- {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
- {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
- {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
- {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
- {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
- {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
- {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
- {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
- {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
- {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
- {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
- {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
- {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
- {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
- {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
- {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
- {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
- {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
- {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
- {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
- {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
- {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
- {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
- {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
- {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
- {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
- {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
- {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
- {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
- {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
- {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
- {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
- {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
- {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
- {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
- {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
- {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
- {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
- {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
- {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
- {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
- {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
- {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
- {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
- {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
- {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
- {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
- {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
-};
-
-static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
- .initregs = yl9200_s1dfb_initregs,
- .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
- .platform_init_video = yl9200_init_video,
-};
-
-#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
-#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
-#define YL9200_FB_VMEM_SIZE SZ_2M
-
-static struct resource yl9200_s1dfb_resource[] = {
- [0] = { /* video mem */
- .name = "s1d13xxxfb memory",
- .start = YL9200_FB_VMEM_BASE,
- .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* video registers */
- .name = "s1d13xxxfb registers",
- .start = YL9200_FB_REG_BASE,
- .end = YL9200_FB_REG_BASE + SZ_512 -1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device yl9200_s1dfb_device = {
- .name = "s1d13806fb",
- .id = -1,
- .dev = {
- .dma_mask = &s1dfb_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &yl9200_s1dfb_pdata,
- },
- .resource = yl9200_s1dfb_resource,
- .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
-};
-
-void __init yl9200_add_device_video(void)
-{
- platform_device_register(&yl9200_s1dfb_device);
-}
-#else
-void __init yl9200_add_device_video(void) {}
-#endif
-
-
-static void __init yl9200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&yl9200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&yl9200_usbh_data);
- /* USB Device */
- at91_add_device_udc(&yl9200_udc_data);
- /* I2C */
- at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
- /* MMC */
- at91_add_device_mci(0, &yl9200_mci0_data);
- /* NAND */
- at91_add_device_nand(&yl9200_nand_data);
- /* NOR Flash */
- platform_device_register(&yl9200_flash);
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- /* SPI */
- at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
- /* Touchscreen */
- yl9200_add_device_ts();
-#endif
- /* LEDs. */
- at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
- /* Push Buttons */
- yl9200_add_device_buttons();
- /* VGA */
- yl9200_add_device_video();
-}
-
-MACHINE_START(YL9200, "uCdragon YL-9200")
- /* Maintainer: S.Birtles */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = yl9200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = yl9200_board_init,
-MACHINE_END