summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndy Walls <awalls@md.metrocast.net>2010-07-18 19:57:25 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2010-08-08 23:42:54 -0300
commit5a28d9a320c865007da830c065bcaecfe91b3932 (patch)
tree60ca62e075c8b917165582707f1b0748512a471e
parentd06d5777b211112e8355e2f5a700c6a9babfdd6f (diff)
V4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin inversion
There is a distinction on IR Tx for the CX2388[578] chips of carrier sense inversion (space is a carrier burst and mark is no burst) and I/O pin level inversion (0 is high output level, 1 is low output level). Allow the caller to set these parameters distinctly as v4l2_subdevice IR parameters. This permits the IR device to be configured and enabled without the IR Tx LED being on during idle/space time due to an external hardware level inversion Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-rw-r--r--drivers/media/video/cx23885/cx23885-input.c2
-rw-r--r--drivers/media/video/cx23885/cx23888-ir.c32
-rw-r--r--include/media/v4l2-subdev.h5
3 files changed, 29 insertions, 10 deletions
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index d0b1613ede2f..496d751ffdc8 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -170,7 +170,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
* mark is received as low logic level;
* falling edges are detected as rising edges; etc.
*/
- params.invert = true;
+ params.invert_level = true;
break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index f63d378257a7..28ca90ff223c 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -60,6 +60,8 @@ MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
#define CNTRL_CPL 0x00001000
#define CNTRL_LBM 0x00002000
#define CNTRL_R 0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO 0x00008000
#define CX23888_IR_TXCLK_REG 0x170004
#define TXCLK_TCD 0x0000FFFF
@@ -423,6 +425,13 @@ static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
invert ? CNTRL_CPL : 0);
}
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+ bool invert)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+ invert ? CNTRL_IVO : 0);
+}
+
/*
* IR Rx & Tx Clock Register helpers
*/
@@ -782,8 +791,8 @@ static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
- o->invert = p->invert;
- atomic_set(&state->rx_invert, p->invert);
+ o->invert_level = p->invert_level;
+ atomic_set(&state->rx_invert, p->invert_level);
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
@@ -894,8 +903,11 @@ static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
/* FIXME - make this dependent on resolution for better performance */
control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
- control_tx_polarity_invert(dev, p->invert);
- o->invert = p->invert;
+ control_tx_polarity_invert(dev, p->invert_carrier_sense);
+ o->invert_carrier_sense = p->invert_carrier_sense;
+
+ control_tx_level_invert(dev, p->invert_level);
+ o->invert_level = p->invert_level;
o->interrupt_enable = p->interrupt_enable;
o->enable = p->enable;
@@ -1025,8 +1037,11 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
cntrl & CNTRL_TFE ? "enabled" : "disabled");
v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
cntrl & CNTRL_TIC ? "not empty" : "half full or less");
- v4l2_info(sd, "\tSignal polarity: %s\n",
- cntrl & CNTRL_CPL ? "0:mark 1:space" : "0:space 1:mark");
+ v4l2_info(sd, "\tOutput pin level inversion %s\n",
+ cntrl & CNTRL_IVO ? "yes" : "no");
+ v4l2_info(sd, "\tCarrier polarity: %s\n",
+ cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+ : "space:noburst mark:burst");
if (cntrl & CNTRL_MOD) {
v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
clock_divider_to_carrier_freq(txclk));
@@ -1146,7 +1161,7 @@ static const struct v4l2_subdev_ir_parameters default_rx_params = {
.noise_filter_min_width = 333333, /* ns */
.carrier_range_lower = 35000,
.carrier_range_upper = 37000,
- .invert = false,
+ .invert_level = false,
};
static const struct v4l2_subdev_ir_parameters default_tx_params = {
@@ -1160,7 +1175,8 @@ static const struct v4l2_subdev_ir_parameters default_tx_params = {
.modulation = true,
.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
.duty_cycle = 25, /* 25 % - RC-5 carrier */
- .invert = false,
+ .invert_level = false,
+ .invert_carrier_sense = false,
};
int cx23888_ir_probe(struct cx23885_dev *dev)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 9195ad490ee2..a780cca185fd 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -379,7 +379,10 @@ struct v4l2_subdev_ir_parameters {
u32 max_pulse_width; /* ns, valid only for baseband signal */
unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
unsigned int duty_cycle; /* percent, valid only for modulated signal*/
- bool invert; /* logically invert sense of mark/space */
+ bool invert_level; /* invert signal level */
+
+ /* Tx only */
+ bool invert_carrier_sense; /* Send 0/space as a carrier burst */
/* Rx only */
u32 noise_filter_min_width; /* ns, min time of a valid pulse */