summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-01-06 14:41:41 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-01-06 15:59:19 -0800
commitd29389de0b0ee1715333bafc6ac3f22a75aa4313 (patch)
tree6c4321359bd10231532d6cb2141f06070d8ddfd6
parentc2bacfc44f4b8d03dbaad5d2dca2fb4161e81975 (diff)
spi_gpio driver
Generalize the old at91rm9200 "bootstrap" bitbanging SPI master driver as "spi_gpio", so it works with arbitrary GPIOs and can be configured through platform_data. Such SPI masters support: - any number of bus instances (bus_num is the platform_device.id) - any number of chipselects (one GPIO per spi_device) - all four SPI_MODE values, and SPI_CS_HIGH - i/o word sizes from 1 to 32 bits; - devices configured as with any other spi_master controller When configured using platform_data, this provides relatively low clock rates. On platforms that support inlined GPIO calls, significantly improved transfer speeds are also possible with a semi-custom driver. (It's still painful when accessing flash memory, but less so.) Sanity checked by using this version to replace both native controllers on a board with six different SPI slaves, relying on three different SPI_MODE_* values and both SPI_CS_HIGH settings for correct operation. [akpm@linux-foundation.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Magnus Damm <damm@igel.co.jp> Tested-by: Magnus Damm <damm@igel.co.jp> Cc: Torgil Svensson <torgil.svensson@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/spi/Kconfig18
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/spi_gpio.c360
-rw-r--r--include/linux/spi/spi_gpio.h60
4 files changed, 438 insertions, 1 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b9d0efb6803f..4a6fe01831a8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -78,7 +78,7 @@ config SPI_AU1550
will be called au1550_spi.
config SPI_BITBANG
- tristate "Bitbanging SPI master"
+ tristate "Utilities for Bitbanging SPI masters"
help
With a few GPIO pins, your system can bitbang the SPI protocol.
Select this to get SPI support through I/O pins (GPIO, parallel
@@ -100,6 +100,22 @@ config SPI_BUTTERFLY
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_GPIO
+ tristate "GPIO-based bitbanging SPI Master"
+ depends on GENERIC_GPIO
+ select SPI_BITBANG
+ help
+ This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
+ interface to manage MOSI, MISO, SCK, and chipselect signals. SPI
+ slaves connected to a bus using this driver are configured as usual,
+ except that the spi_board_info.controller_data holds the GPIO number
+ for the chipselect used by this controller driver.
+
+ Note that this driver often won't achieve even 1 Mbit/sec speeds,
+ making it unusually slow for SPI. If your platform can inline
+ GPIO operations, you should be able to leverage that for better
+ speed with a custom version of this driver; see the source code.
+
config SPI_IMX
tristate "Freescale iMX SPI controller"
depends on ARCH_IMX && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ccf18de34e1e..5e9f521b8844 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
+obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
new file mode 100644
index 000000000000..49698cabc30d
--- /dev/null
+++ b/drivers/spi/spi_gpio.c
@@ -0,0 +1,360 @@
+/*
+ * spi_gpio.c - SPI master driver using generic bitbanged GPIO
+ *
+ * Copyright (C) 2006,2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/spi/spi_gpio.h>
+
+
+/*
+ * This bitbanging SPI master driver should help make systems usable
+ * when a native hardware SPI engine is not available, perhaps because
+ * its driver isn't yet working or because the I/O pins it requires
+ * are used for other purposes.
+ *
+ * platform_device->driver_data ... points to spi_gpio
+ *
+ * spi->controller_state ... reserved for bitbang framework code
+ * spi->controller_data ... holds chipselect GPIO
+ *
+ * spi->master->dev.driver_data ... points to spi_gpio->bitbang
+ */
+
+struct spi_gpio {
+ struct spi_bitbang bitbang;
+ struct spi_gpio_platform_data pdata;
+ struct platform_device *pdev;
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Because the overhead of going through four GPIO procedure calls
+ * per transferred bit can make performance a problem, this code
+ * is set up so that you can use it in either of two ways:
+ *
+ * - The slow generic way: set up platform_data to hold the GPIO
+ * numbers used for MISO/MOSI/SCK, and issue procedure calls for
+ * each of them. This driver can handle several such busses.
+ *
+ * - The quicker inlined way: only helps with platform GPIO code
+ * that inlines operations for constant GPIOs. This can give
+ * you tight (fast!) inner loops, but each such bus needs a
+ * new driver. You'll define a new C file, with Makefile and
+ * Kconfig support; the C code can be a total of six lines:
+ *
+ * #define DRIVER_NAME "myboard_spi2"
+ * #define SPI_MISO_GPIO 119
+ * #define SPI_MOSI_GPIO 120
+ * #define SPI_SCK_GPIO 121
+ * #define SPI_N_CHIPSEL 4
+ * #include "spi_gpio.c"
+ */
+
+#ifndef DRIVER_NAME
+#define DRIVER_NAME "spi_gpio"
+
+#define GENERIC_BITBANG /* vs tight inlines */
+
+/* all functions referencing these symbols must define pdata */
+#define SPI_MISO_GPIO ((pdata)->miso)
+#define SPI_MOSI_GPIO ((pdata)->mosi)
+#define SPI_SCK_GPIO ((pdata)->sck)
+
+#define SPI_N_CHIPSEL ((pdata)->num_chipselect)
+
+#endif
+
+/*----------------------------------------------------------------------*/
+
+static inline const struct spi_gpio_platform_data * __pure
+spi_to_pdata(const struct spi_device *spi)
+{
+ const struct spi_bitbang *bang;
+ const struct spi_gpio *spi_gpio;
+
+ bang = spi_master_get_devdata(spi->master);
+ spi_gpio = container_of(bang, struct spi_gpio, bitbang);
+ return &spi_gpio->pdata;
+}
+
+/* this is #defined to avoid unused-variable warnings when inlining */
+#define pdata spi_to_pdata(spi)
+
+static inline void setsck(const struct spi_device *spi, int is_on)
+{
+ gpio_set_value(SPI_SCK_GPIO, is_on);
+}
+
+static inline void setmosi(const struct spi_device *spi, int is_on)
+{
+ gpio_set_value(SPI_MOSI_GPIO, is_on);
+}
+
+static inline int getmiso(const struct spi_device *spi)
+{
+ return gpio_get_value(SPI_MISO_GPIO);
+}
+
+#undef pdata
+
+/*
+ * NOTE: this clocks "as fast as we can". It "should" be a function of the
+ * requested device clock. Software overhead means we usually have trouble
+ * reaching even one Mbit/sec (except when we can inline bitops), so for now
+ * we'll just assume we never need additional per-bit slowdowns.
+ */
+#define spidelay(nsecs) do {} while (0)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+/*
+ * These functions can leverage inline expansion of GPIO calls to shrink
+ * costs for a txrx bit, often by factors of around ten (by instruction
+ * count). That is particularly visible for larger word sizes, but helps
+ * even with default 8-bit words.
+ *
+ * REVISIT overheads calling these functions for each word also have
+ * significant performance costs. Having txrx_bufs() calls that inline
+ * the txrx_word() logic would help performance, e.g. on larger blocks
+ * used with flash storage or MMC/SD. There should also be ways to make
+ * GCC be less stupid about reloading registers inside the I/O loops,
+ * even without inlined GPIO calls; __attribute__((hot)) on GCC 4.3?
+ */
+
+static u32 spi_gpio_txrx_word_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode2(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 spi_gpio_txrx_word_mode3(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+/*----------------------------------------------------------------------*/
+
+static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
+{
+ unsigned long cs = (unsigned long) spi->controller_data;
+
+ /* set initial clock polarity */
+ if (is_active)
+ setsck(spi, spi->mode & SPI_CPOL);
+
+ /* SPI is normally active-low */
+ gpio_set_value(cs, (spi->mode & SPI_CS_HIGH) ? is_active : !is_active);
+}
+
+static int spi_gpio_setup(struct spi_device *spi)
+{
+ unsigned long cs = (unsigned long) spi->controller_data;
+ int status = 0;
+
+ if (spi->bits_per_word > 32)
+ return -EINVAL;
+
+ if (!spi->controller_state) {
+ status = gpio_request(cs, spi->dev.bus_id);
+ if (status)
+ return status;
+ status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
+ }
+ if (!status)
+ status = spi_bitbang_setup(spi);
+ if (status) {
+ if (!spi->controller_state)
+ gpio_free(cs);
+ }
+ return status;
+}
+
+static void spi_gpio_cleanup(struct spi_device *spi)
+{
+ unsigned long cs = (unsigned long) spi->controller_data;
+
+ gpio_free(cs);
+ spi_bitbang_cleanup(spi);
+}
+
+static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+{
+ int value;
+
+ value = gpio_request(pin, label);
+ if (value == 0) {
+ if (is_in)
+ value = gpio_direction_input(pin);
+ else
+ value = gpio_direction_output(pin, 0);
+ }
+ return value;
+}
+
+static int __init
+spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+{
+ int value;
+
+ /* NOTE: SPI_*_GPIO symbols may reference "pdata" */
+
+ value = spi_gpio_alloc(SPI_MOSI_GPIO, label, false);
+ if (value)
+ goto done;
+
+ value = spi_gpio_alloc(SPI_MISO_GPIO, label, true);
+ if (value)
+ goto free_mosi;
+
+ value = spi_gpio_alloc(SPI_SCK_GPIO, label, false);
+ if (value)
+ goto free_miso;
+
+ goto done;
+
+free_miso:
+ gpio_free(SPI_MISO_GPIO);
+free_mosi:
+ gpio_free(SPI_MOSI_GPIO);
+done:
+ return value;
+}
+
+static int __init spi_gpio_probe(struct platform_device *pdev)
+{
+ int status;
+ struct spi_master *master;
+ struct spi_gpio *spi_gpio;
+ struct spi_gpio_platform_data *pdata;
+
+ pdata = pdev->dev.platform_data;
+#ifdef GENERIC_BITBANG
+ if (!pdata || !pdata->num_chipselect)
+ return -ENODEV;
+#endif
+
+ status = spi_gpio_request(pdata, dev_name(&pdev->dev));
+ if (status < 0)
+ return status;
+
+ master = spi_alloc_master(&pdev->dev, sizeof *spi_gpio);
+ if (!master) {
+ status = -ENOMEM;
+ goto gpio_free;
+ }
+ spi_gpio = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, spi_gpio);
+
+ spi_gpio->pdev = pdev;
+ if (pdata)
+ spi_gpio->pdata = *pdata;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = SPI_N_CHIPSEL;
+ master->setup = spi_gpio_setup;
+ master->cleanup = spi_gpio_cleanup;
+
+ spi_gpio->bitbang.master = spi_master_get(master);
+ spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
+ spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_word_mode3;
+ spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+ spi_gpio->bitbang.flags = SPI_CS_HIGH;
+
+ status = spi_bitbang_start(&spi_gpio->bitbang);
+ if (status < 0) {
+ spi_master_put(spi_gpio->bitbang.master);
+gpio_free:
+ gpio_free(SPI_MISO_GPIO);
+ gpio_free(SPI_MOSI_GPIO);
+ gpio_free(SPI_SCK_GPIO);
+ spi_master_put(master);
+ }
+
+ return status;
+}
+
+static int __exit spi_gpio_remove(struct platform_device *pdev)
+{
+ struct spi_gpio *spi_gpio;
+ struct spi_gpio_platform_data *pdata;
+ int status;
+
+ spi_gpio = platform_get_drvdata(pdev);
+ pdata = pdev->dev.platform_data;
+
+ /* stop() unregisters child devices too */
+ status = spi_bitbang_stop(&spi_gpio->bitbang);
+ spi_master_put(spi_gpio->bitbang.master);
+
+ platform_set_drvdata(pdev, NULL);
+
+ gpio_free(SPI_MISO_GPIO);
+ gpio_free(SPI_MOSI_GPIO);
+ gpio_free(SPI_SCK_GPIO);
+
+ return status;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver spi_gpio_driver = {
+ .driver.name = DRIVER_NAME,
+ .driver.owner = THIS_MODULE,
+ .remove = __exit_p(spi_gpio_remove),
+};
+
+static int __init spi_gpio_init(void)
+{
+ return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
+}
+module_init(spi_gpio_init);
+
+static void __exit spi_gpio_exit(void)
+{
+ platform_driver_unregister(&spi_gpio_driver);
+}
+module_exit(spi_gpio_exit);
+
+
+MODULE_DESCRIPTION("SPI master driver using generic bitbanged GPIO ");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h
new file mode 100644
index 000000000000..0f01a0f1f40c
--- /dev/null
+++ b/include/linux/spi/spi_gpio.h
@@ -0,0 +1,60 @@
+#ifndef __LINUX_SPI_GPIO_H
+#define __LINUX_SPI_GPIO_H
+
+/*
+ * For each bitbanged SPI bus, set up a platform_device node with:
+ * - name "spi_gpio"
+ * - id the same as the SPI bus number it implements
+ * - dev.platform data pointing to a struct spi_gpio_platform_data
+ *
+ * Or, see the driver code for information about speedups that are
+ * possible on platforms that support inlined access for GPIOs (no
+ * spi_gpio_platform_data is used).
+ *
+ * Use spi_board_info with these busses in the usual way, being sure
+ * that the controller_data being the GPIO used for each device's
+ * chipselect:
+ *
+ * static struct spi_board_info ... [] = {
+ * ...
+ * // this slave uses GPIO 42 for its chipselect
+ * .controller_data = (void *) 42,
+ * ...
+ * // this one uses GPIO 86 for its chipselect
+ * .controller_data = (void *) 86,
+ * ...
+ * };
+ *
+ * If the bitbanged bus is later switched to a "native" controller,
+ * that platform_device and controller_data should be removed.
+ */
+
+/**
+ * struct spi_gpio_platform_data - parameter for bitbanged SPI master
+ * @sck: number of the GPIO used for clock output
+ * @mosi: number of the GPIO used for Master Output, Slave In (MOSI) data
+ * @miso: number of the GPIO used for Master Input, Slave Output (MISO) data
+ * @num_chipselect: how many slaves to allow
+ *
+ * All GPIO signals used with the SPI bus managed through this driver
+ * (chipselects, MOSI, MISO, SCK) must be configured as GPIOs, instead
+ * of some alternate function.
+ *
+ * It can be convenient to use this driver with pins that have alternate
+ * functions associated with a "native" SPI controller if a driver for that
+ * controller is not available, or is missing important functionality.
+ *
+ * On platforms which can do so, configure MISO with a weak pullup unless
+ * there's an external pullup on that signal. That saves power by avoiding
+ * floating signals. (A weak pulldown would save power too, but many
+ * drivers expect to see all-ones data as the no slave "response".)
+ */
+struct spi_gpio_platform_data {
+ unsigned sck;
+ unsigned mosi;
+ unsigned miso;
+
+ u16 num_chipselect;
+};
+
+#endif /* __LINUX_SPI_GPIO_H */