Merge tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.4 kernel
  development cycle.  Development pace is high in pin control again this
  merge window.  28 contributors, 83 patches.

  It hits a few sites outside the pin control subsystem:

   - Device tree bindings in Documentation (as usual)
   - MAINTAINERS
   - drivers/base/* for the "init" state handling by Doug Anderson.
     This has been ACKed by Greg.
   - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change
     in the USB subsystem.  This has been ACKed by both Greg and Felipe.
   - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone
     through the ARM SoC tree but ended up here.

  This time I am using Geert Uytterhoeven as submaintainer for SH PFC
  since the are three-four people working in parallel with new Renesas
  ASICs.

  Summary of changes:

  Infrastructure:

   - Doug Anderson wrote a patch adding an "init" state different from
     the "default" state for pin control state handling in the core
     framework.  This is applied before the driver's probe() call if
     defined and takes precedence over "default".  If both are defined,
     "init" will be applied *before* probe() and "default" will be
     applied *after* probe().

  Significant subdriver improvements:

   - SH PFC is switched to getting GPIO ranges from the device tree
     ranges property on DT platforms.
   - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized.
   - Got rid of SH PFC hardcoded IRQ numbers.
   - Allwinner sunxi external interrupt through the "r" controller.
   - Moved the Cygnus driver to use DT-provided GPIO ranges.

  New drivers:

   - Atmel PIO4 pin controller for the SAMA4D2 family

  New subdrivers:

   - Rockchip RK3036 subdriver
   - Renesas SH PFC R8A7795 subdriver
   - Allwinner sunxi A83T PIO subdriver
   - Freescale i.MX7d iomux lpsr subdriver
   - Marvell Berlin BG4CT subdriver
   - SiRF Atlas 7 step B SoC subdriver
   - Intel Broxton SoC subdriver

  Apart from this, the usual slew if syntactic and semantic fixes"

* tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits)
  pinctrl: pinconf: remove needless loop
  pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
  pinctrl: zynq: fix UTF-8 errors
  pinctrl: zynq: Initialize early
  pinctrl: at91: add missing of_node_put
  pinctrl: tegra-xusb: Correct lane mux options
  pinctrl: intel: Add Intel Broxton pin controller support
  pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
  pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
  drivers/pinctrl: Add the concept of an "init" state
  pinctrl: uniphier: set input-enable before pin-muxing
  pinctrl: cygnus: Add new compatible string for gpio controller driver
  pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
  pinctrl: cygnus: Optional DT property to support pin mappings
  pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
  pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
  pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
  pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
  pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
  usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>
  ...

0 files changed, 0 insertions, 0 deletions