diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:35:30 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-11 18:35:30 -0700 |
commit | d06e4156430e7c5eb4f04dabcaa0d9e2fba335e3 (patch) | |
tree | 6a8e0663a501b321655dd12683a48635474c28f0 /Documentation/devicetree/bindings/arm | |
parent | 8931084c0d017314ad025f19353f7c5c1d3782d8 (diff) | |
parent | f59d261180f3b66367962f1974090815ce710056 (diff) |
Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
- DT binding schema examples are now validated against the schemas.
Various examples are fixed due to that.
- Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73
- Initial schemas for networking bindings. This includes ethernet, phy
and mdio common bindings with several Allwinner and stmmac converted
to the schema.
- Conversion of more Arm top-level SoC/board bindings to DT schema
- Conversion of PSCI binding to DT schema
- Rework Arm CPU schema to coexist with other CPU schemas
- Add a bunch of missing vendor prefixes and new ones for SoChip,
Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif
- Add Mediatek UART RX wakeup support to binding
- Add reset to ST UART binding
- Remove some Linuxisms from the endianness common-properties.txt
binding
- Make the flattened DT read-only after init
- Ignore disabled reserved memory nodes
- Clean-up some dead code in FDT functions
* tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: vendor-prefixes: add Sipeed
dt-bindings: vendor-prefixes: add SoChip
dt-bindings: 83xx-512x-pci: Drop cell-index property
dt-bindings: serial: add documentation for Rx in-band wakeup support
dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema
of: unittest: simplify getting the adapter of a client
of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap
of/platform: Drop superfluous cast in of_device_make_bus_id()
dt-bindings: usb: ehci: Fix example warnings
dt-bindings: net: Use phy-mode instead of phy-connection-type
dt-bindings: simple-framebuffer: Add requirement for pipelines
dt-bindings: display: Fix simple-framebuffer example
dt-bindings: net: mdio: Add child nodes
dt-bindings: net: mdio: Add address and size cells
dt-bindings: net: mdio: Add a nodename pattern
dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property
dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes
dt-bindings: backlight: lm3630a: correct schema validation
dt-bindings: net: dwmac: Deprecate the PHY reset properties
dt-bindings: net: sun8i-emac: Convert the binding to a schemas
...
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
18 files changed, 533 insertions, 450 deletions
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt deleted file mode 100644 index d00debe2e86f..000000000000 --- a/Documentation/devicetree/bindings/arm/al,alpine.txt +++ /dev/null @@ -1,16 +0,0 @@ -Annapurna Labs Alpine Platform Device Tree Bindings ---------------------------------------------------------------- - -Boards in the Alpine family shall have the following properties: - -* Required root node properties: -compatible: must contain "al,alpine" - -* Example: - -/ { - model = "Annapurna Labs Alpine Dev Board"; - compatible = "al,alpine"; - - ... -} diff --git a/Documentation/devicetree/bindings/arm/al,alpine.yaml b/Documentation/devicetree/bindings/arm/al,alpine.yaml new file mode 100644 index 000000000000..a70dff277e05 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/al,alpine.yaml @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/al,alpine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Annapurna Labs Alpine Platform Device Tree Bindings + +maintainers: + - Tsahee Zidenberg <tsahee@annapurnalabs.com> + - Antoine Tenart <antoine.tenart@bootlin.com> + +properties: + compatible: + items: + - const: al,alpine + model: + items: + - const: "Annapurna Labs Alpine Dev Board" + +... diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index abff8d834a6a..6758ece324b1 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -197,7 +197,7 @@ Required nodes: The description for the board must include: - a "psci" node describing the boot method used for the secondary CPUs. A detailed description of the bindings used for "psci" nodes is present - in the psci.txt file. + in the psci.yaml file. - a "cpus" node describing the available cores and their associated "enable-method"s. For more details see cpus.txt file. diff --git a/Documentation/devicetree/bindings/arm/axxia.txt b/Documentation/devicetree/bindings/arm/axxia.txt deleted file mode 100644 index 7b4ef9c07696..000000000000 --- a/Documentation/devicetree/bindings/arm/axxia.txt +++ /dev/null @@ -1,12 +0,0 @@ -Axxia AXM55xx device tree bindings - -Boards using the AXM55xx SoC need to have the following properties: - -Required root node property: - - - compatible = "lsi,axm5516" - -Boards: - - LSI AXM5516 Validation board (Amarillo) - compatible = "lsi,axm5516-amarillo", "lsi,axm5516" diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml new file mode 100644 index 000000000000..98780a569f22 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/axxia.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/axxia.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axxia AXM55xx device tree bindings + +maintainers: + - Anders Berg <anders.berg@lsi.com> + +properties: + compatible: + description: LSI AXM5516 Validation board (Amarillo) + items: + - const: lsi,axm5516-amarillo + - const: lsi,axm5516 + +... diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 591bbd012d63..aa40b074b864 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -39,281 +39,242 @@ description: |+ described below. properties: - $nodename: - const: cpus - description: Container of cpu nodes - - '#address-cells': - enum: [1, 2] + reg: + maxItems: 1 description: | - Definition depends on ARM architecture version and configuration: + Usage and definition depend on ARM architecture version and + configuration: On uniprocessor ARM architectures previous to v7 - value must be 1, to enable a simple enumeration - scheme for processors that do not have a HW CPU - identification register. - On 32-bit ARM 11 MPcore, ARM v7 or later systems - value must be 1, that corresponds to CPUID/MPIDR - registers sizes. - On ARM v8 64-bit systems value should be set to 2, - that corresponds to the MPIDR_EL1 register size. - If MPIDR_EL1[63:32] value is equal to 0 on all CPUs - in the system, #address-cells can be set to 1, since - MPIDR_EL1[63:32] bits are not used for CPUs - identification. - - '#size-cells': - const: 0 - -patternProperties: - '^cpu@[0-9a-f]+$': - type: object - properties: - device_type: - const: cpu - - reg: - maxItems: 1 - description: | - Usage and definition depend on ARM architecture version and - configuration: - - On uniprocessor ARM architectures previous to v7 - this property is required and must be set to 0. - - On ARM 11 MPcore based systems this property is - required and matches the CPUID[11:0] register bits. - - Bits [11:0] in the reg cell must be set to - bits [11:0] in CPU ID register. - - All other bits in the reg cell must be set to 0. - - On 32-bit ARM v7 or later systems this property is - required and matches the CPU MPIDR[23:0] register - bits. - - Bits [23:0] in the reg cell must be set to - bits [23:0] in MPIDR. - - All other bits in the reg cell must be set to 0. - - On ARM v8 64-bit systems this property is required - and matches the MPIDR_EL1 register affinity bits. + this property is required and must be set to 0. + + On ARM 11 MPcore based systems this property is + required and matches the CPUID[11:0] register bits. + + Bits [11:0] in the reg cell must be set to + bits [11:0] in CPU ID register. + + All other bits in the reg cell must be set to 0. + + On 32-bit ARM v7 or later systems this property is + required and matches the CPU MPIDR[23:0] register + bits. + + Bits [23:0] in the reg cell must be set to + bits [23:0] in MPIDR. + + All other bits in the reg cell must be set to 0. + + On ARM v8 64-bit systems this property is required + and matches the MPIDR_EL1 register affinity bits. + + * If cpus node's #address-cells property is set to 2 + + The first reg cell bits [7:0] must be set to + bits [39:32] of MPIDR_EL1. + + The second reg cell bits [23:0] must be set to + bits [23:0] of MPIDR_EL1. + + * If cpus node's #address-cells property is set to 1 + + The reg cell bits [23:0] must be set to bits [23:0] + of MPIDR_EL1. + + All other bits in the reg cells must be set to 0. + + compatible: + enum: + - arm,arm710t + - arm,arm720t + - arm,arm740t + - arm,arm7ej-s + - arm,arm7tdmi + - arm,arm7tdmi-s + - arm,arm9es + - arm,arm9ej-s + - arm,arm920t + - arm,arm922t + - arm,arm925 + - arm,arm926e-s + - arm,arm926ej-s + - arm,arm940t + - arm,arm946e-s + - arm,arm966e-s + - arm,arm968e-s + - arm,arm9tdmi + - arm,arm1020e + - arm,arm1020t + - arm,arm1022e + - arm,arm1026ej-s + - arm,arm1136j-s + - arm,arm1136jf-s + - arm,arm1156t2-s + - arm,arm1156t2f-s + - arm,arm1176jzf + - arm,arm1176jz-s + - arm,arm1176jzf-s + - arm,arm11mpcore + - arm,armv8 # Only for s/w models + - arm,cortex-a5 + - arm,cortex-a7 + - arm,cortex-a8 + - arm,cortex-a9 + - arm,cortex-a12 + - arm,cortex-a15 + - arm,cortex-a17 + - arm,cortex-a53 + - arm,cortex-a57 + - arm,cortex-a72 + - arm,cortex-a73 + - arm,cortex-m0 + - arm,cortex-m0+ + - arm,cortex-m1 + - arm,cortex-m3 + - arm,cortex-m4 + - arm,cortex-r4 + - arm,cortex-r5 + - arm,cortex-r7 + - brcm,brahma-b15 + - brcm,brahma-b53 + - brcm,vulcan + - cavium,thunder + - cavium,thunder2 + - faraday,fa526 + - intel,sa110 + - intel,sa1100 + - marvell,feroceon + - marvell,mohawk + - marvell,pj4a + - marvell,pj4b + - marvell,sheeva-v5 + - marvell,sheeva-v7 + - nvidia,tegra132-denver + - nvidia,tegra186-denver + - nvidia,tegra194-carmel + - qcom,krait + - qcom,kryo + - qcom,kryo385 + - qcom,scorpion + + enable-method: + allOf: + - $ref: '/schemas/types.yaml#/definitions/string' + - oneOf: + # On ARM v8 64-bit this property is required + - enum: + - psci + - spin-table + # On ARM 32-bit systems this property is optional + - enum: + - actions,s500-smp + - allwinner,sun6i-a31 + - allwinner,sun8i-a23 + - allwinner,sun9i-a80-smp + - allwinner,sun8i-a83t-smp + - amlogic,meson8-smp + - amlogic,meson8b-smp + - arm,realview-smp + - brcm,bcm11351-cpu-method + - brcm,bcm23550 + - brcm,bcm2836-smp + - brcm,bcm63138 + - brcm,bcm-nsp-smp + - brcm,brahma-b15 + - marvell,armada-375-smp + - marvell,armada-380-smp + - marvell,armada-390-smp + - marvell,armada-xp-smp + - marvell,98dx3236-smp + - mediatek,mt6589-smp + - mediatek,mt81xx-tz-smp + - qcom,gcc-msm8660 + - qcom,kpss-acc-v1 + - qcom,kpss-acc-v2 + - renesas,apmu + - renesas,r9a06g032-smp + - rockchip,rk3036-smp + - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp + - ste,dbx500-smp + + cpu-release-addr: + $ref: '/schemas/types.yaml#/definitions/uint64' + + description: + Required for systems that have an "enable-method" + property value of "spin-table". + On ARM v8 64-bit systems must be a two cell + property identifying a 64-bit zero-initialised + memory location. + + cpu-idle-states: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: | + List of phandles to idle state nodes supported + by this cpu (see ./idle-states.txt). + + capacity-dmips-mhz: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + u32 value representing CPU capacity (see ./cpu-capacity.txt) in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + + dynamic-power-coefficient: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: + A u32 value that represents the running time dynamic + power coefficient in units of uW/MHz/V^2. The + coefficient can either be calculated from power + measurements or derived by analysis. + + The dynamic power consumption of the CPU is + proportional to the square of the Voltage (V) and + the clock frequency (f). The coefficient is used to + calculate the dynamic power as below - + + Pdyn = dynamic-power-coefficient * V^2 * f + + where voltage is in V, frequency is in MHz. + + qcom,saw: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the SAW* node associated with this CPU. - * If cpus node's #address-cells property is set to 2 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The first reg cell bits [7:0] must be set to - bits [39:32] of MPIDR_EL1. + * arm/msm/qcom,saw2.txt - The second reg cell bits [23:0] must be set to - bits [23:0] of MPIDR_EL1. + qcom,acc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the ACC* node associated with this CPU. - * If cpus node's #address-cells property is set to 1 + Required for systems that have an "enable-method" property + value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - The reg cell bits [23:0] must be set to bits [23:0] - of MPIDR_EL1. + * arm/msm/qcom,kpss-acc.txt - All other bits in the reg cells must be set to 0. + rockchip,pmu: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the syscon node controlling the cpu core power domains. - compatible: - items: - - enum: - - arm,arm710t - - arm,arm720t - - arm,arm740t - - arm,arm7ej-s - - arm,arm7tdmi - - arm,arm7tdmi-s - - arm,arm9es - - arm,arm9ej-s - - arm,arm920t - - arm,arm922t - - arm,arm925 - - arm,arm926e-s - - arm,arm926ej-s - - arm,arm940t - - arm,arm946e-s - - arm,arm966e-s - - arm,arm968e-s - - arm,arm9tdmi - - arm,arm1020e - - arm,arm1020t - - arm,arm1022e - - arm,arm1026ej-s - - arm,arm1136j-s - - arm,arm1136jf-s - - arm,arm1156t2-s - - arm,arm1156t2f-s - - arm,arm1176jzf - - arm,arm1176jz-s - - arm,arm1176jzf-s - - arm,arm11mpcore - - arm,armv8 # Only for s/w models - - arm,cortex-a5 - - arm,cortex-a7 - - arm,cortex-a8 - - arm,cortex-a9 - - arm,cortex-a12 - - arm,cortex-a15 - - arm,cortex-a17 - - arm,cortex-a53 - - arm,cortex-a57 - - arm,cortex-a72 - - arm,cortex-a73 - - arm,cortex-m0 - - arm,cortex-m0+ - - arm,cortex-m1 - - arm,cortex-m3 - - arm,cortex-m4 - - arm,cortex-r4 - - arm,cortex-r5 - - arm,cortex-r7 - - brcm,brahma-b15 - - brcm,brahma-b53 - - brcm,vulcan - - cavium,thunder - - cavium,thunder2 - - faraday,fa526 - - intel,sa110 - - intel,sa1100 - - marvell,feroceon - - marvell,mohawk - - marvell,pj4a - - marvell,pj4b - - marvell,sheeva-v5 - - marvell,sheeva-v7 - - nvidia,tegra132-denver - - nvidia,tegra186-denver - - nvidia,tegra194-carmel - - qcom,krait - - qcom,kryo - - qcom,kryo385 - - qcom,scorpion - - enable-method: - allOf: - - $ref: '/schemas/types.yaml#/definitions/string' - - oneOf: - # On ARM v8 64-bit this property is required - - enum: - - psci - - spin-table - # On ARM 32-bit systems this property is optional - - enum: - - actions,s500-smp - - allwinner,sun6i-a31 - - allwinner,sun8i-a23 - - allwinner,sun9i-a80-smp - - allwinner,sun8i-a83t-smp - - amlogic,meson8-smp - - amlogic,meson8b-smp - - arm,realview-smp - - brcm,bcm11351-cpu-method - - brcm,bcm23550 - - brcm,bcm2836-smp - - brcm,bcm63138 - - brcm,bcm-nsp-smp - - brcm,brahma-b15 - - marvell,armada-375-smp - - marvell,armada-380-smp - - marvell,armada-390-smp - - marvell,armada-xp-smp - - marvell,98dx3236-smp - - mediatek,mt6589-smp - - mediatek,mt81xx-tz-smp - - qcom,gcc-msm8660 - - qcom,kpss-acc-v1 - - qcom,kpss-acc-v2 - - renesas,apmu - - renesas,r9a06g032-smp - - rockchip,rk3036-smp - - rockchip,rk3066-smp - - socionext,milbeaut-m10v-smp - - ste,dbx500-smp - - cpu-release-addr: - $ref: '/schemas/types.yaml#/definitions/uint64' - - description: - Required for systems that have an "enable-method" - property value of "spin-table". - On ARM v8 64-bit systems must be a two cell - property identifying a 64-bit zero-initialised - memory location. - - cpu-idle-states: - $ref: '/schemas/types.yaml#/definitions/phandle-array' - description: | - List of phandles to idle state nodes supported - by this cpu (see ./idle-states.txt). - - capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - u32 value representing CPU capacity (see ./cpu-capacity.txt) in - DMIPS/MHz, relative to highest capacity-dmips-mhz - in the system. - - dynamic-power-coefficient: - $ref: '/schemas/types.yaml#/definitions/uint32' - description: - A u32 value that represents the running time dynamic - power coefficient in units of uW/MHz/V^2. The - coefficient can either be calculated from power - measurements or derived by analysis. - - The dynamic power consumption of the CPU is - proportional to the square of the Voltage (V) and - the clock frequency (f). The coefficient is used to - calculate the dynamic power as below - - - Pdyn = dynamic-power-coefficient * V^2 * f - - where voltage is in V, frequency is in MHz. - - qcom,saw: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the SAW* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,saw2.txt - - qcom,acc: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the ACC* node associated with this CPU. - - Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2" - - * arm/msm/qcom,kpss-acc.txt - - rockchip,pmu: - $ref: '/schemas/types.yaml#/definitions/phandle' - description: | - Specifies the syscon node controlling the cpu core power domains. - - Optional for systems that have an "enable-method" - property value of "rockchip,rk3066-smp" - While optional, it is the preferred way to get access to - the cpu-core power-domains. - - required: - - device_type - - reg - - compatible - - dependencies: - cpu-release-addr: [enable-method] - rockchip,pmu: [enable-method] + Optional for systems that have an "enable-method" + property value of "rockchip,rk3066-smp" + While optional, it is the preferred way to get access to + the cpu-core power-domains. required: - - '#address-cells' - - '#size-cells' + - device_type + - reg + - compatible + +dependencies: + rockchip,pmu: [enable-method] examples: - | diff --git a/Documentation/devicetree/bindings/arm/digicolor.txt b/Documentation/devicetree/bindings/arm/digicolor.txt deleted file mode 100644 index 658553f40b23..000000000000 --- a/Documentation/devicetree/bindings/arm/digicolor.txt +++ /dev/null @@ -1,6 +0,0 @@ -Conexant Digicolor Platforms Device Tree Bindings - -Each device tree must specify which Conexant Digicolor SoC it uses. -Must be the following compatible string: - - cnxt,cx92755 diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml new file mode 100644 index 000000000000..d9c80b827e9b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/digicolor.yaml @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/digicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Conexant Digicolor Platforms Device Tree Bindings + +maintainers: + - Baruch Siach <baruch@tkos.co.il> + +properties: + compatible: + const: cnxt,cx92755 + +... diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 45730ba60af5..326f29b270ad 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -241,9 +241,13 @@ processor idle states, defined as device tree nodes, are listed. - "psci" # On ARM 32-bit systems this property is optional -The nodes describing the idle states (state) can only be defined within the -idle-states node, any other configuration is considered invalid and therefore -must be ignored. +This assumes that the "enable-method" property is set to "psci" in the cpu +node[6] that is responsible for setting up CPU idle management in the OS +implementation. + +The nodes describing the idle states (state) can only be defined +within the idle-states node, any other configuration is considered invalid +and therefore must be ignored. =========================================== 4 - state node @@ -687,7 +691,7 @@ cpus { Documentation/devicetree/bindings/arm/cpus.yaml [2] ARM Linux Kernel documentation - PSCI bindings - Documentation/devicetree/bindings/arm/psci.txt + Documentation/devicetree/bindings/arm/psci.yaml [3] ARM Server Base System Architecture (SBSA) http://infocenter.arm.com/help/index.jsp @@ -697,3 +701,6 @@ cpus { [5] Devicetree Specification https://www.devicetree.org/specifications/ + +[6] ARM Linux Kernel documentation - Booting AArch64 Linux + Documentation/arm64/booting.txt diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt deleted file mode 100644 index 11087edb0658..000000000000 --- a/Documentation/devicetree/bindings/arm/moxart.txt +++ /dev/null @@ -1,12 +0,0 @@ -MOXA ART device tree bindings - -Boards with the MOXA ART SoC shall have the following properties: - -Required root node property: - -compatible = "moxa,moxart"; - -Boards: - -- UC-7112-LX: embedded computer - compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml new file mode 100644 index 000000000000..c068df59fad2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/moxart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MOXA ART device tree bindings + +maintainers: + - Jonas Jensen <jonas.jensen@gmail.com> + +properties: + compatible: + description: UC-7112-LX embedded computer + items: + - const: moxa,moxart-uc-7112-lx + - const: moxa,moxart + +... diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt deleted file mode 100644 index 56ec8ddc4a3b..000000000000 --- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.txt +++ /dev/null @@ -1,8 +0,0 @@ -NXP LPC32xx Platforms Device Tree Bindings ------------------------------------------- - -Boards with the NXP LPC32xx SoC shall have the following properties: - -Required root node property: - -compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250" diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml new file mode 100644 index 000000000000..07f39d3eee7e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx Platforms Device Tree Bindings + +maintainers: + - Roland Stigge <stigge@antcom.de> + +properties: + compatible: + oneOf: + - enum: + - nxp,lpc3220 + - nxp,lpc3230 + - nxp,lpc3240 + - items: + - enum: + - ea,ea3250 + - phytec,phy3250 + - const: nxp,lpc3250 + +... diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt deleted file mode 100644 index a2c4f1d52492..000000000000 --- a/Documentation/devicetree/bindings/arm/psci.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Power State Coordination Interface (PSCI) - -Firmware implementing the PSCI functions described in ARM document number -ARM DEN 0022A ("Power State Coordination Interface System Software on ARM -processors") can be used by Linux to initiate various CPU-centric power -operations. - -Issue A of the specification describes functions for CPU suspend, hotplug -and migration of secure software. - -Functions are invoked by trapping to the privilege level of the PSCI -firmware (specified as part of the binding below) and passing arguments -in a manner similar to that specified by AAPCS: - - r0 => 32-bit Function ID / return value - {r1 - r3} => Parameters - -Note that the immediate field of the trapping instruction must be set -to #0. - - -Main node required properties: - - - compatible : should contain at least one of: - - * "arm,psci" : For implementations complying to PSCI versions prior - to 0.2. - For these cases function IDs must be provided. - - * "arm,psci-0.2" : For implementations complying to PSCI 0.2. - Function IDs are not required and should be ignored by - an OS with PSCI 0.2 support, but are permitted to be - present for compatibility with existing software when - "arm,psci" is later in the compatible list. - - * "arm,psci-1.0" : For implementations complying to PSCI 1.0. - PSCI 1.0 is backward compatible with PSCI 0.2 with - minor specification updates, as defined in the PSCI - specification[2]. - - - method : The method of calling the PSCI firmware. Permitted - values are: - - "smc" : SMC #0, with the register assignments specified - in this binding. - - "hvc" : HVC #0, with the register assignments specified - in this binding. - -Main node optional properties: - - - cpu_suspend : Function ID for CPU_SUSPEND operation - - - cpu_off : Function ID for CPU_OFF operation - - - cpu_on : Function ID for CPU_ON operation - - - migrate : Function ID for MIGRATE operation - -Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle -state nodes, as per bindings in [1]) must specify the following properties: - -- arm,psci-suspend-param - Usage: Required for state nodes[1] if the corresponding - idle-states node entry-method property is set - to "psci". - Value type: <u32> - Definition: power_state parameter to pass to the PSCI - suspend call. - -Example: - -Case 1: PSCI v0.1 only. - - psci { - compatible = "arm,psci"; - method = "smc"; - cpu_suspend = <0x95c10000>; - cpu_off = <0x95c10001>; - cpu_on = <0x95c10002>; - migrate = <0x95c10003>; - }; - -Case 2: PSCI v0.2 only - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - -Case 3: PSCI v0.2 and PSCI v0.1. - - A DTB may provide IDs for use by kernels without PSCI 0.2 support, - enabling firmware and hypervisors to support existing and new kernels. - These IDs will be ignored by kernels with PSCI 0.2 support, which will - use the standard PSCI 0.2 IDs exclusively. - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "hvc"; - - cpu_on = < arbitrary value >; - cpu_off = < arbitrary value >; - - ... - }; - -[1] Kernel documentation - ARM idle states bindings - Documentation/devicetree/bindings/arm/idle-states.txt -[2] Power State Coordination Interface (PSCI) specification - http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml new file mode 100644 index 000000000000..7abdf58b335e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + const: arm,psci-0.2 + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + const: arm,psci-1.0 + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + + method: + description: The method of calling the PSCI firmware. + allOf: + - $ref: /schemas/types.yaml#/definitions/string-array + - enum: + # SMC #0, with the register assignments specified in this binding. + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/arm/idle-states.txt + + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index f6316ab66385..54ef6b6b9189 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -102,6 +102,15 @@ properties: - const: qcom,msm8960 - items: + - enum: + - fairphone,fp2 + - lge,hammerhead + - sony,xperia-amami + - sony,xperia-castor + - sony,xperia-honami + - const: qcom,msm8974 + + - items: - const: qcom,msm8916-mtp/1 - const: qcom,msm8916-mtp - const: qcom,msm8916 @@ -110,6 +119,11 @@ properties: - const: qcom,msm8996-mtp - items: + - enum: + - qcom,ipq4019-ap-dk04.1-c3 + - qcom,ipq4019-ap-dk07.1-c1 + - qcom,ipq4019-ap-dk07.1-c2 + - qcom,ipq4019-dk04.1-c1 - const: qcom,ipq4019 - items: diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt deleted file mode 100644 index 43c80762c428..000000000000 --- a/Documentation/devicetree/bindings/arm/rda.txt +++ /dev/null @@ -1,17 +0,0 @@ -RDA Micro platforms device tree bindings ----------------------------------------- - -RDA8810PL SoC -============= - -Required root node properties: - - - compatible : must contain "rda,8810pl" - - -Boards: - -Root node property compatible must contain, depending on board: - - - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" - - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml new file mode 100644 index 000000000000..51cec2b63b04 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.yaml @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/rda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RDA Micro platforms device tree bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +properties: + compatible: + items: + - enum: + - xunlong,orangepi-2g-iot # Orange Pi 2G-IoT + - xunlong,orangepi-i96 # Orange Pi i96 + - const: rda,8810pl + +... |