Merge tag 'berlin-dt-3.16' of https://github.com/shesselba/linux-berlin into next/dt

Merge "ARM: berlin: DT changes for v3.16" from Sebastian Hesselbart:

Quite a lot changes but it looks like DT approach is really paying off.
BG2Q joins Berlin SoC family with corresponding development board, DW
gpio nodes for all SoCs. Most notably, we have settled clock bindings
to allow us to continue on drivers requiring clocks and pinctrl bindings.
Last but not least, BG2Q gained SDHCI support and is able to properly
boot into userspace.

* tag 'berlin-dt-3.16' of https://github.com/shesselba/linux-berlin:
  ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP
  ARM: dts: berlin: add the SDHCI nodes for the BG2Q
  ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
  dt-binding: ARM: add pinctrl binding docs for Marvell Berlin2 SoCs
  ARM: dts: berlin: convert BG2Q to DT clock nodes
  ARM: dts: berlin: convert BG2 to DT clock nodes
  ARM: dts: berlin: convert BG2CD to DT clock nodes
  clk: berlin: add binding include for Berlin SoC clock ids
  dt-binding: ARM: add clock binding docs for Marvell Berlin2 SoCs
  ARM: dts: berlin: add the BG2CD GPIO nodes
  ARM: dts: berlin: add the BG2 GPIO nodes
  ARM: dts: berlin: add the BG2Q GPIO nodes
  ARM: dts: berlin: add scu and chipctrl device nodes for BG2/BG2Q
  ARM: dts: berlin: add the Marvell BG2-Q DMP device tree
  ARM: dts: berlin: add the Marvell Armada 1500 pro

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 102 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 737afa5f8148..94013a9a8769 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -12,6 +12,7 @@ SoC and board used. Currently known SoC compatibles are:
     "marvell,berlin2"      for Marvell Armada 1500 (BG2, 88DE3100),
     "marvell,berlin2cd"    for Marvell Armada 1500-mini (BG2CD, 88DE3005)
     "marvell,berlin2ct"    for Marvell Armada ? (BG2CT, 88DE????)
+    "marvell,berlin2q"     for Marvell Armada 1500-pro (BG2Q, 88DE3114)
     "marvell,berlin3"      for Marvell Armada ? (BG3, 88DE????)
 
 * Example:
@@ -22,3 +23,104 @@ SoC and board used. Currently known SoC compatibles are:
 
 	...
 }
+
+* Marvell Berlin2 chip control binding
+
+Marvell Berlin SoCs have a chip control register set providing several
+individual registers dealing with pinmux, padmux, clock, reset, and secondary
+CPU boot address. Unfortunately, the individual registers are spread among the
+chip control registers, so there should be a single DT node only providing the
+different functions which are described below.
+
+Required properties:
+- compatible: shall be one of
+	"marvell,berlin2-chip-ctrl" for BG2
+	"marvell,berlin2cd-chip-ctrl" for BG2CD
+	"marvell,berlin2q-chip-ctrl" for BG2Q
+- reg: address and length of following register sets for
+  BG2/BG2CD: chip control register set
+  BG2Q: chip control register set and cpu pll registers
+
+* Marvell Berlin2 system control binding
+
+Marvell Berlin SoCs have a system control register set providing several
+individual registers dealing with pinmux, padmux, and reset.
+
+Required properties:
+- compatible: should be one of
+	"marvell,berlin2-system-ctrl" for BG2
+	"marvell,berlin2cd-system-ctrl" for BG2CD
+	"marvell,berlin2q-system-ctrl" for BG2Q
+- reg: address and length of the system control register set
+
+* Clock provider binding
+
+As clock related registers are spread among the chip control registers, the
+chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q)
+SoCs share the same IP for PLLs and clocks, with some minor differences in
+features and register layout.
+
+Required properties:
+- #clock-cells: shall be set to 1
+- clocks: clock specifiers referencing the core clock input clocks
+- clock-names: array of strings describing the input clock specifiers above.
+    Allowed clock-names for the reference clocks are
+      "refclk" for the SoCs osciallator input on all SoCs,
+    and SoC-specific input clocks for
+      BG2/BG2CD: "video_ext0" for the external video clock input
+
+Clocks provided by core clocks shall be referenced by a clock specifier
+indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h
+for the corresponding index mapping.
+
+* Pin controller binding
+
+Pin control registers are part of both register sets, chip control and system
+control. The pins controlled are organized in groups, so no actual pin
+information is needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and the muxing
+function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
+a 'function' in the pin-controller subsystem.
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
+Example:
+
+chip: chip-control@ea0000 {
+	compatible = "marvell,berlin2-chip-ctrl";
+	#clock-cells = <1>;
+	reg = <0xea0000 0x400>;
+	clocks = <&refclk>, <&externaldev 0>;
+	clock-names = "refclk", "video_ext0";
+
+	spi1_pmux: spi1-pmux {
+		groups = "G0";
+		function = "spi1";
+	};
+};
+
+sysctrl: system-controller@d000 {
+	compatible = "marvell,berlin2-system-ctrl";
+	reg = <0xd000 0x100>;
+
+	uart0_pmux: uart0-pmux {
+		groups = "GSM4";
+		function = "uart0";
+	};
+
+	uart1_pmux: uart1-pmux {
+		groups = "GSM5";
+		function = "uart1";
+	};
+
+	uart2_pmux: uart2-pmux {
+		groups = "GSM3";
+		function = "uart2";
+	};
+};