Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Ladies and gentlemen, we proudly announce to you the latest branch of
  ARM device tree contents for the mainline kernel.  Come and see, come
  and see!

  No less than twentythree thousand lines of additions! Just imagine the
  joy you will have of using your mainline kernel on newly supported
  hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or
  UniPhier hardware!

  For those of you feeling less adventurous, added hardware support on
  platforms such as TI DM814x and Gumstix Overo platforms might be more
  of your liking.

  We've got something for everyone here!

  Ahem.  Cough.  So, anyway...

  This is the usual large batch of DT updates.  Lots and lots of smaller
  changes, some of the larger ones to point out are:

   - Rockchip veyron (Chromebook) support, as well as several other new boards
   - DRM support on Atmel AT91SAM9N12EK
   - USB additions on some Allwinner platforms
   - Mediatek MT6580 support
   - Freescale i.MX6UL support
   - cleanups for Renesas shmobile platforms
   - lots of added devices on LPC18xx
   - lots of added devices and boards on UniPhier

  There's also some dependent code added here, in particular some
  branches that are primarily merged through the clock tree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits)
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
  ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes
  ARM: dts: rockchip: correct regulator power states for suspend
  ARM: dts: rockchip: correct regulator PM properties
  ARM: dts: vexpress: Use assigned-clock-parents for sp810
  pinctrl: tegra: Only set the gpio range if needed
  arm: boot: dts: am4372: add ARM timers and SCU nodes
  ARM: dts: AM4372: Add the am4372-rtc compatible string
  ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain
  ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain
  ...

7 files changed, 68 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 23c097812d98..7fd64ec9ee1d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -52,6 +52,7 @@ System Timer (ST) required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+- clocks: phandle to input clock.
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
@@ -63,7 +64,7 @@ TC/TCLIB Timer required properties:
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
 - clock-names: tuple listing input clock names.
-	Required elements: "t0_clk"
+	Required elements: "t0_clk", "slow_clk"
 	Optional elements: "t1_clk", "t2_clk"
 - clocks: phandles to input clocks.
 
@@ -91,12 +92,14 @@ RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
   <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 Example:
 
 	rstc@fffffd00 {
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
+		clocks = <&clk32k>;
 	};
 
 RAMC SDRAM/DDR Controller required properties:
@@ -119,6 +122,7 @@ required properties:
 - compatible: Should be "atmel,<chip>-shdwc".
   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 optional properties:
 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -137,9 +141,10 @@ optional at91sam9x5 properties:
 
 Example:
 
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
 	};
 
 Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000000..6824b3180ffb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible:		Should be "raspberrypi,bcm2835-firmware"
+- mboxes:		Phandle to the firmware device's Mailbox.
+			  (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fee4b..5171ad8f48ff 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
 board. Currently known boards are:
 
 "buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
 "buffalo,lsxhl"
 "buffalo,lsxl"
 "dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29db6..2daa424a13a4 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
 Required root node property:
 
 compatible: Must contain one of
+   "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
    "mediatek,mt8127"
@@ -14,6 +15,9 @@ compatible: Must contain one of
 
 Supported boards:
 
+- Evaluation board for MT6580:
+    Required root node properties:
+      - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
 - bq Aquaris5 smart phone:
     Required root node properties:
       - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352ccd8..3c9c3a7f3d25 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -11,6 +11,7 @@ Required properties:
 	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
+	"mediatek,mt6580-sysirq"
 	"mediatek,mt6577-sysirq"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef1d1..9f4e5136e568 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
 
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a9b5..af58cd74aeff 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+    Required root node properties:
+      - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+    Required root node properties:
+      - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+    Required root node properties:
+      - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+    Required root node properties:
+      - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+    Required root node properties:
+      - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+    Required root node properties:
+      - compatible = "rockchip,r88", "rockchip,rk3368";