diff options
| author | Thierry Reding <treding@nvidia.com> | 2016-04-12 17:07:36 +0200 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2016-04-19 17:25:19 -0500 |
| commit | a8ca1b28acf543143bb96f62eb1423164accaa53 (patch) | |
| tree | 140c40b7650883f06b97e09ead90661718e0ec07 /Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt | |
| parent | f43521e9521133c169fe4b9255fb0917baf5ec84 (diff) | |
dt-bindings: tegra: Rename some bindings for consistency
Device tree binding for NVIDIA Tegra have traditionally carried the
"nvidia," vendor prefix in the filename. A couple of odd ones don't, so
fix them up for consistency.
Also rename existing bindings to reflect the first compatible value that
they document. This wasn't done consistently either.
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt new file mode 100644 index 000000000000..66c83c3e8915 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -0,0 +1,32 @@ +Tegra124 SoC SATA AHCI controller + +Required properties : +- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, + must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> + is tegra132. +- reg : Should contain 2 entries: + - AHCI register set (SATA BAR5) + - SATA register set +- interrupts : Defines the interrupt used by SATA +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - sata + - sata-oob + - cml1 + - pll_e +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sata + - sata-oob + - sata-cold +- phys : Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. +- phy-names : Must include the following entries: + - sata-phy : XUSB PADCTL SATA PHY +- hvdd-supply : Defines the SATA HVDD regulator +- vddio-supply : Defines the SATA VDDIO regulator +- avdd-supply : Defines the SATA AVDD regulator +- target-5v-supply : Defines the SATA 5V power regulator +- target-12v-supply : Defines the SATA 12V power regulator |