summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
diff options
context:
space:
mode:
authorHiroshi Doyu <hdoyu@nvidia.com>2013-05-22 19:45:33 +0300
committerStephen Warren <swarren@nvidia.com>2013-05-28 16:10:53 -0600
commit9513109df85184ab5c4a20c939a0eeea92422118 (patch)
tree39b103013f030c1a4457008b1b3a5b2dd4e80f64 /Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
parentec23ad67f641b09673d337e80b7fb6afe424f621 (diff)
ARM: tegra30: create a DT header defining CLK IDs
Create a header file to define the clock IDs used by the Tegra30 clock binding. Remove the list of definitions from the binding documentation, and refer the reader to the header file. This will allow the same header to be used by both device tree files, and drivers implementing this binding, which guarantees that the two stay in sync. This also makes device trees more readable by using names instead of magic numbers. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, add header to clock/ instead of clk/ to match binding location] Signed-off-by: Stephen Warren <swarren@nvidia.com>
Diffstat (limited to 'Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt')
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt211
1 files changed, 4 insertions, 207 deletions
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index f3da3be5fcad..0f714081e986 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -12,212 +12,9 @@ Required properties :
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
- In clock consumers, this cell represents the clock ID exposed by the CAR.
-
- The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- registers. These IDs often match those in the CAR's RST_DEVICES registers,
- but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- this case, those clocks are assigned IDs above 160 in order to highlight
- this issue. Implementations that interpret these clock IDs as bit values
- within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- explicitly handle these special cases.
-
- The balance of the clocks controlled by the CAR are assigned IDs of 160 and
- above.
-
- 0 cpu
- 1 unassigned
- 2 unassigned
- 3 unassigned
- 4 rtc
- 5 timer
- 6 uarta
- 7 unassigned (register bit affects uartb and vfir)
- 8 gpio
- 9 sdmmc2
- 10 unassigned (register bit affects spdif_in and spdif_out)
- 11 i2s1
- 12 i2c1
- 13 ndflash
- 14 sdmmc1
- 15 sdmmc4
- 16 unassigned
- 17 pwm
- 18 i2s2
- 19 epp
- 20 unassigned (register bit affects vi and vi_sensor)
- 21 2d
- 22 usbd
- 23 isp
- 24 3d
- 25 unassigned
- 26 disp2
- 27 disp1
- 28 host1x
- 29 vcp
- 30 i2s0
- 31 cop_cache
-
- 32 mc
- 33 ahbdma
- 34 apbdma
- 35 unassigned
- 36 kbc
- 37 statmon
- 38 pmc
- 39 unassigned (register bit affects fuse and fuse_burn)
- 40 kfuse
- 41 sbc1
- 42 nor
- 43 unassigned
- 44 sbc2
- 45 unassigned
- 46 sbc3
- 47 i2c5
- 48 dsia
- 49 unassigned (register bit affects cve and tvo)
- 50 mipi
- 51 hdmi
- 52 csi
- 53 tvdac
- 54 i2c2
- 55 uartc
- 56 unassigned
- 57 emc
- 58 usb2
- 59 usb3
- 60 mpe
- 61 vde
- 62 bsea
- 63 bsev
-
- 64 speedo
- 65 uartd
- 66 uarte
- 67 i2c3
- 68 sbc4
- 69 sdmmc3
- 70 pcie
- 71 owr
- 72 afi
- 73 csite
- 74 pciex
- 75 avpucq
- 76 la
- 77 unassigned
- 78 unassigned
- 79 dtv
- 80 ndspeed
- 81 i2cslow
- 82 dsib
- 83 unassigned
- 84 irama
- 85 iramb
- 86 iramc
- 87 iramd
- 88 cram2
- 89 unassigned
- 90 audio_2x a/k/a audio_2x_sync_clk
- 91 unassigned
- 92 csus
- 93 cdev2
- 94 cdev1
- 95 unassigned
-
- 96 cpu_g
- 97 cpu_lp
- 98 3d2
- 99 mselect
- 100 tsensor
- 101 i2s3
- 102 i2s4
- 103 i2c4
- 104 sbc5
- 105 sbc6
- 106 d_audio
- 107 apbif
- 108 dam0
- 109 dam1
- 110 dam2
- 111 hda2codec_2x
- 112 atomics
- 113 audio0_2x
- 114 audio1_2x
- 115 audio2_2x
- 116 audio3_2x
- 117 audio4_2x
- 118 audio5_2x
- 119 actmon
- 120 extern1
- 121 extern2
- 122 extern3
- 123 sata_oob
- 124 sata
- 125 hda
- 127 se
- 128 hda2hdmi
- 129 sata_cold
-
- 160 uartb
- 161 vfir
- 162 spdif_in
- 163 spdif_out
- 164 vi
- 165 vi_sensor
- 166 fuse
- 167 fuse_burn
- 168 cve
- 169 tvo
-
- 170 clk_32k
- 171 clk_m
- 172 clk_m_div2
- 173 clk_m_div4
- 174 pll_ref
- 175 pll_c
- 176 pll_c_out1
- 177 pll_m
- 178 pll_m_out1
- 179 pll_p
- 180 pll_p_out1
- 181 pll_p_out2
- 182 pll_p_out3
- 183 pll_p_out4
- 184 pll_a
- 185 pll_a_out0
- 186 pll_d
- 187 pll_d_out0
- 188 pll_d2
- 189 pll_d2_out0
- 190 pll_u
- 191 pll_x
- 192 pll_x_out0
- 193 pll_e
- 194 spdif_in_sync
- 195 i2s0_sync
- 196 i2s1_sync
- 197 i2s2_sync
- 198 i2s3_sync
- 199 i2s4_sync
- 200 vimclk
- 201 audio0
- 202 audio1
- 203 audio2
- 204 audio3
- 205 audio4
- 206 audio5
- 207 clk_out_1 (extern1)
- 208 clk_out_2 (extern2)
- 209 clk_out_3 (extern3)
- 210 sclk
- 211 blink
- 212 cclk_g
- 213 cclk_lp
- 214 twd
- 215 cml0
- 216 cml1
- 217 hclk
- 218 pclk
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra30-car.h>.
Example SoC include file:
@@ -229,7 +26,7 @@ Example SoC include file:
};
usb@c5004000 {
- clocks = <&tegra_car 58>; /* usb2 */
+ clocks = <&tegra_car TEGRA30_CLK_USB2>;
};
};