Merge tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Refine reserved memory nomap handling

 - Merge some PCI and non-PCI address handling implementations

 - Simplify of_address.h header ifdefs

 - Improve printk handling of some 64-bit types

 - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
   VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
   linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
   pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
   renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
   OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
   to DT schema

 - Convert mux and mux controller bindings to schema. This includes MDIO
   IIO, and I2C muxes.

 - Add Arm PL031 RTC binding schema

 - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd

 - Fix some stale doc references

 - Remove stale property-units.txt. Superseded by schema in dt-schema
   repo.

 - Fixes for 'unevaluatedProperties' handling (enabled with experimental
   json-schema support)

 - Drop redundant usage of minItems and maxItems across the tree

 - Update some examples to use bindings with a schema

* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
  dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
  dt-bindings: display: renesas,du: Fix 'ports' reference
  dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
  dt-bindings: crypto: ccree: Convert to json-schema
  dt-bindings: fpga: zynq: convert bindings to YAML
  dt-bindings: rtc: zynqmp: convert bindings to YAML
  dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  of: of_reserved_mem: mark nomap memory instead of removing
  of: of_reserved_mem: only call memblock_free for normal reserved memory
  dt-bindings: Drop redundant minItems/maxItems
  dt-bindings: spmi: Correct 'reg' schema
  of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
  dt-bindings: clk: vc5: Fix example
  dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
  dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
  dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
  of: Remove superfluous casts when printing u64 values
  of: Fix truncation of memory sizes on 32-bit platforms
  dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
  dt-bindings: pwm: Use examples with documented/matching schema
  ...

12 files changed, 255 insertions, 191 deletions

diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index a27025cd3909..c4b7243ddcf2 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -51,7 +51,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: High Frequency Oscillator (usually at 24MHz)
       - description: Low Frequency Oscillator (usually at 32kHz)
@@ -60,7 +59,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: hosc
       - const: losc
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index 28675b0b80f1..26ed040bc717 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -84,6 +84,7 @@ patternProperties:
       idt,slew-percent:
         description: The Slew rate control for CMOS single-ended.
         enum: [ 80, 85, 90, 100 ]
+    additionalProperties: false
 
 required:
   - compatible
@@ -139,13 +140,13 @@ examples:
             clock-names = "xin";
 
             OUT1 {
-                idt,drive-mode = <VC5_CMOSD>;
-                idt,voltage-microvolts = <1800000>;
+                idt,mode = <VC5_CMOSD>;
+                idt,voltage-microvolt = <1800000>;
                 idt,slew-percent = <80>;
             };
 
             OUT4 {
-                idt,drive-mode = <VC5_LVDS>;
+                idt,mode = <VC5_LVDS>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index eacccc88bbf6..8e2eac6cbfb9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -46,7 +46,6 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: calib
       - const: calib_backup
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
index 1121b3934cb9..b0d1c65aa354 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -27,7 +27,6 @@ properties:
       - description: Sleep clock source
       - description: PLL test clock source (Optional clock)
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -35,7 +34,6 @@ properties:
       - const: sleep_clk
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
-    maxItems: 3
 
   '#clock-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
index 78f35832aa41..1122700dcc2b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -36,7 +36,6 @@ properties:
       - description: USB3 phy wrapper pipe clock source (Optional clock)
       - description: USB3 phy sec pipe clock source (Optional clock)
     minItems: 2
-    maxItems: 13
 
   clock-names:
     items:
@@ -54,7 +53,6 @@ properties:
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
-    maxItems: 13
 
   '#clock-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
deleted file mode 100644
index 268ca615459e..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Device tree Clock bindings for Renesas EMMA Mobile EV2
-
-This binding uses the common clock binding.
-
-* SMU
-System Management Unit described in user's manual R19UH0037EJ1000_SMU.
-This is not a clock provider, but clocks under SMU depend on it.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu"
-- reg: Address and Size of SMU registers
-
-* SMU_CLKDIV
-Function block with an input mux and a divider, which corresponds to
-"Serial clock generator" in fig."Clock System Overview" of the manual,
-and "xxx frequency division setting register" (XXXCLKDIV) registers.
-This makes internal (neither input nor output) clock that is provided
-to input of xxxGCLK block.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-clkdiv"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-* SMU_GCLK
-Clock gating node shown as "Clock stop processing block" in the
-fig."Clock System Overview" of the manual.
-Registers are "xxx clock gate control register" (XXXGCLKCTRL).
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-gclk"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Input clock as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-Example of provider:
-
-usia_u0_sclkdiv: usia_u0_sclkdiv {
-	compatible = "renesas,emev2-smu-clkdiv";
-	reg = <0x610 0>;
-	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
-	#clock-cells = <0>;
-};
-
-usia_u0_sclk: usia_u0_sclk {
-	compatible = "renesas,emev2-smu-gclk";
-	reg = <0x4a0 1>;
-	clocks = <&usia_u0_sclkdiv>;
-	#clock-cells = <0>;
-};
-
-Example of consumer:
-
-serial@e1020000 {
-	compatible = "renesas,em-uart";
-	reg = <0xe1020000 0x38>;
-	interrupts = <0 8 0>;
-	clocks = <&usia_u0_sclk>;
-	clock-names = "sclk";
-};
-
-Example of clock-tree description:
-
- This describes a clock path in the clock tree
-  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
-
-smu@e0110000 {
-	compatible = "renesas,emev2-smu";
-	reg = <0xe0110000 0x10000>;
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	c32ki: c32ki {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-	pll3_fo: pll3_fo {
-		compatible = "fixed-factor-clock";
-		clocks = <&c32ki>;
-		clock-div = <1>;
-		clock-mult = <7000>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclkdiv: usia_u0_sclkdiv {
-		compatible = "renesas,emev2-smu-clkdiv";
-		reg = <0x610 0>;
-		clocks = <&pll3_fo>;
-		#clock-cells = <0>;
-	};
-	usia_u0_sclk: usia_u0_sclk {
-		compatible = "renesas,emev2-smu-gclk";
-		reg = <0x4a0 1>;
-		clocks = <&usia_u0_sclkdiv>;
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
new file mode 100644
index 000000000000..4d9a64800481
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 System Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The System Management Unit is described in user's manual R19UH0037EJ1000_SMU.
+  This is not a clock provider, but clocks under SMU depend on it.
+
+properties:
+  compatible:
+    const: renesas,emev2-smu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  ".*sclkdiv@.*":
+    type: object
+
+    description: |
+      Function block with an input mux and a divider, which corresponds to
+      "Serial clock generator" in fig. "Clock System Overview" of the manual,
+      and "xxx frequency division setting register" (XXXCLKDIV) registers.
+      This makes internal (neither input nor output) clock that is provided
+      to input of xxxGCLK block.
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-clkdiv
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        minItems: 1
+        maxItems: 4
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  ".*sclk@.*":
+    type: object
+
+    description: |
+      Clock gating node shown as "Clock stop processing block" in the
+      fig. "Clock System Overview" of the manual.
+      Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-gclk
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+additionalProperties: true
+
+examples:
+  - |
+    // Example of clock-tree description:
+    //
+    //  This describes a clock path in the clock tree
+    //   c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+    clocks@e0110000 {
+            compatible = "renesas,emev2-smu";
+            reg = <0xe0110000 0x10000>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            c32ki: c32ki {
+                    compatible = "fixed-clock";
+                    clock-frequency = <32768>;
+                    #clock-cells = <0>;
+            };
+            pll3_fo: pll3_fo {
+                    compatible = "fixed-factor-clock";
+                    clocks = <&c32ki>;
+                    clock-div = <1>;
+                    clock-mult = <7000>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+                    compatible = "renesas,emev2-smu-clkdiv";
+                    reg = <0x610 0>;
+                    clocks = <&pll3_fo>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclk: usia_u0_sclk@4a0,1 {
+                    compatible = "renesas,emev2-smu-gclk";
+                    reg = <0x4a0 1>;
+                    clocks = <&usia_u0_sclkdiv>;
+                    #clock-cells = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
deleted file mode 100644
index aed713cf0831..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Renesas R9A06G032 SYSCTRL
-
-Required Properties:
-
-  - compatible: Must be:
-    - "renesas,r9a06g032-sysctrl"
-  - reg: Base address and length of the SYSCTRL IO block.
-  - #clock-cells: Must be 1
-  - clocks: References to the parent clocks:
-	- external 40mhz crystal.
-	- external (optional) 32.768khz
-	- external (optional) jtag input
-	- external (optional) RGMII_REFCLK
-  - clock-names: Must be:
-        clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
-  - #power-domain-cells: Must be 0
-
-Examples
---------
-
-  - SYSCTRL node:
-
-	sysctrl: system-controller@4000c000 {
-		compatible = "renesas,r9a06g032-sysctrl";
-		reg = <0x4000c000 0x1000>;
-		#clock-cells = <1>;
-
-		clocks = <&ext_mclk>, <&ext_rtc_clk>,
-				<&ext_jtag_clk>, <&ext_rgmii_ref>;
-		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
-		#power-domain-cells = <0>;
-	};
-
-  - Other nodes can use the clocks provided by SYSCTRL as in:
-
-	#include <dt-bindings/clock/r9a06g032-sysctrl.h>
-	uart0: serial@40060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x40060000 0x400>;
-		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		power-domains = <&sysctrl>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
new file mode 100644
index 000000000000..25dbb0fac065
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1D (R9A06G032) System Controller
+
+maintainers:
+  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    const: renesas,r9a06g032-sysctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External 40 MHz crystal
+      - description: Optional external 32.768 kHz crystal
+      - description: Optional external JTAG input
+      - description: Optional external RGMII_REFCLK
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mclk
+      - const: rtc
+      - const: jtag
+      - const: rgmii_ref_ext
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl: system-controller@4000c000 {
+            compatible = "renesas,r9a06g032-sysctrl";
+            reg = <0x4000c000 0x1000>;
+            clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>,
+                     <&ext_rgmii_ref>;
+            clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+            #clock-cells = <1>;
+            #power-domain-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index 4069e09cb62d..47e1ab08c95d 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -40,7 +40,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 4
     items:
       - const: ext-26m
       - const: ext-32k
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
deleted file mode 100644
index 4e59dc6b1778..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Texas Instruments TI-SCI Clocks
-===============================
-
-All clocks on Texas Instruments' SoCs that contain a System Controller,
-are only controlled by this entity. Communication between a host processor
-running an OS and the System Controller happens through a protocol known
-as TI-SCI[1]. This clock implementation plugs into the common clock
-framework and makes use of the TI-SCI protocol on clock API requests.
-
-[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-Required properties:
--------------------
-- compatible: Must be "ti,k2g-sci-clk"
-- #clock-cells: Shall be 2.
-  In clock consumers, this cell represents the device ID and clock ID
-  exposed by the PM firmware. The list of valid values for the device IDs
-  and clocks IDs for 66AK2G SoC are documented at
-  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
-
-Examples:
---------
-
-pmmc: pmmc {
-	compatible = "ti,k2g-sci";
-
-	k2g_clks: clocks {
-		compatible = "ti,k2g-sci-clk";
-		#clock-cells = <2>;
-	};
-};
-
-uart0: serial@2530c00 {
-	compatible = "ns16550a";
-	clocks = <&k2g_clks 0x2c 0>;
-};
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
new file mode 100644
index 000000000000..0e370289a053
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI clock controller node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This clock controller node uses the TI SCI protocol to perform various clock
+  management of various hardware modules (devices) present on the SoC. This
+  node must be a child node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    const: ti,k2g-sci-clk
+
+  "#clock-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the clock ID.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+    };