Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
 - Support for pipeline clock between KMS drivers.
   . Exynos SoC is required to control clocks across KMS drivers
     according to Exynos SoC version. So this patch refactos
     some relevant codes and provides generic solution for it.
 - Add Exynos5433 SoC support to HDMI parts - HDMI and DECON-TV.
 - Add HW trigger mode support to CRTC drivers.
   . In case of using i80 Panel, some Exynos SoC supports HW trigger
     mode so this patch makes trigger mode - HW or SW trigger - to be
     set according to SoC version properly.
 - And some cleanups and regression fixups.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (39 commits)
  drm/exynos: clean up register definions for fimd and decon
  drm/exynos: decon: clean up interface type
  drm/exynos: fimd: add HW trigger support
  drm/exynos: clean up wait_for_vblank
  drm/exynos: mixer: use generic of_device_get_match_data helper
  drm/exynos: mixer: remove support for non-dt platforms
  drm/exynos: hdmi: use generic of_device_get_match_data helper
  drm/exynos: rotator: use generic of_device_get_match_data helper
  drm/exynos: fimd: use generic of_device_get_match_data helper
  drm/exynos: dsi: use generic of_device_get_match_data helper
  drm/exynos: exynos5433_decon: use generic of_device_get_match_data helper
  drm/exynos: convert clock_enable crtc callback to pipeline clock
  drm/exynos/mixer: enable HDMI-PHY before configuring MIXER
  drm/exynos/decon5433: enable HDMI-PHY before configuring DECON
  drm/exynos: add support for pipeline clock to the framework
  drm/exynos: add helper to get crtc from pipe
  drm/exynos/decon5433: do not protect window in plane disable
  drm/exynos/decon5433: reset decon on start
  drm/exynos/decon5433: fix DECON standalone update
  drm/exynos/hdmi: remove registry dump
  ...

2 files changed, 27 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
index 377afbf5122a..c9fd7b3807e7 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
@@ -5,7 +5,8 @@ Exynos series of SoCs which transfers the image data from a video memory
 buffer to an external LCD interface.
 
 Required properties:
-- compatible: value should be "samsung,exynos5433-decon";
+- compatible: value should be one of:
+	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
 - reg: physical base address and length of the DECON registers set.
 - interrupts: should contain a list of all DECON IP block interrupts in the
 	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
@@ -16,7 +17,7 @@ Required properties:
 - clocks: must include clock specifiers corresponding to entries in the
 	  clock-names property.
 - clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
 	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
 	       "sclk_decon_eclk"
 - ports: contains a port which is connected to mic node. address-cells and
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
index d474f59be6d6..a2ec4c1c9382 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
@@ -5,6 +5,7 @@ Required properties:
 	1) "samsung,exynos4210-hdmi"
 	2) "samsung,exynos4212-hdmi"
 	3) "samsung,exynos5420-hdmi"
+	4) "samsung,exynos5433-hdmi"
 - reg: physical base address of the hdmi and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
@@ -12,6 +13,11 @@ Required properties:
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 4210, 4212, 5420 and 5433:
 - clocks: list of clock IDs from SoC clock driver.
 	a) hdmi: Gate of HDMI IP bus clock.
 	b) sclk_hdmi: Gate of HDMI special clock.
@@ -25,9 +31,24 @@ Required properties:
 		sclk_pixel.
 - clock-names: aliases as per driver requirements for above clock IDs:
 	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 5433:
+- clocks: list of clock specifiers according to common clock bindings.
+	a) hdmi_pclk: Gate of HDMI IP APB bus.
+	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
+	d) i_tmds_clk: Gate of HDMI TMDS clock.
+	e) i_pixel_clk: Gate of HDMI pixel clock.
+	f) i_spdif_clk: Gate of HDMI SPDIF clock.
+	g) oscclk: Oscillator clock, used as parent of following *_user clocks
+		in case HDMI-PHY is not operational.
+	h) tmds_clko: TMDS clock generated by HDMI-PHY.
+	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
+		respectively if HDMI-PHY is off and operational.
+	j) pixel_clko: Pixel clock generated by HDMI-PHY.
+	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
+		respectively if HDMI-PHY is off and operational.
+- clock-names: aliases for above clock specfiers.
+- samsung,sysreg: handle to syscon used to control the system registers.
 
 Example: