dt-bindings: consolidate display related bindings

This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

2 files changed, 0 insertions, 83 deletions

diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
deleted file mode 100644
index 96ec5179c8a0..000000000000
--- a/Documentation/devicetree/bindings/fb/mxsfb.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Freescale MXS LCD Interface (LCDIF)
-
-Required properties:
-- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
-  imx23 and imx28.
-- reg: Address and length of the register set for lcdif
-- interrupts: Should contain lcdif interrupts
-- display : phandle to display node (see below for details)
-
-* display node
-
-Required properties:
-- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
-- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
-
-Required sub-node:
-- display-timings : Refer to binding doc display-timing.txt for details.
-
-Examples:
-
-lcdif@80030000 {
-	compatible = "fsl,imx28-lcdif";
-	reg = <0x80030000 2000>;
-	interrupts = <38 86>;
-
-	display: display {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <164>;
-				hback-porch = <89>;
-				hsync-len = <10>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/fb/sm501fb.txt b/Documentation/devicetree/bindings/fb/sm501fb.txt
deleted file mode 100644
index 9d9f0098092b..000000000000
--- a/Documentation/devicetree/bindings/fb/sm501fb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* SM SM501
-
-The SM SM501 is a LCD controller, with proper hardware, it can also
-drive DVI monitors.
-
-Required properties:
-- compatible : should be "smi,sm501".
-- reg : contain two entries:
-    - First entry: System Configuration register
-    - Second entry: IO space (Display Controller register)
-- interrupts : SMI interrupt to the cpu should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
-  services interrupts for this device.
-
-Optional properties:
-- mode : select a video mode:
-    <xres>x<yres>[-<bpp>][@<refresh>]
-- edid : verbatim EDID data block describing attached display.
-  Data from the detailed timing descriptor will be used to
-  program the display controller.
-- little-endian: available on big endian systems, to
-  set different foreign endian.
-- big-endian: available on little endian systems, to
-  set different foreign endian.
-
-Example for MPC5200:
-	display@1,0 {
-		compatible = "smi,sm501";
-		reg = <1 0x00000000 0x00800000
-		       1 0x03e00000 0x00200000>;
-		interrupts = <1 1 3>;
-		mode = "640x480-32@60";
-		edid = [edid-data];
-	};