Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 1 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index 614bac55df86..a4fe136be2ba 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -17,53 +17,6 @@ Required properties:
 		  - "smc" : SMC #0, following the SMCCC
 		  - "hvc" : HVC #0, following the SMCCC
 
---------------------------------------------------------------------------
-Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
-Zynq MPSoC firmware interface
---------------------------------------------------------------------------
-The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
-tree. It reads required input clock frequencies from the devicetree and acts
-as clock provider for all clock consumers of PS clocks.
-
-See clock_bindings.txt for more information on the generic clock bindings.
-
-Required properties:
- - #clock-cells:	Must be 1
- - compatible:		Must contain:	"xlnx,zynqmp-clk"
- - clocks:		List of clock specifiers which are external input
-			clocks to the given clock controller. Please refer
-			the next section to find the input clocks for a
-			given controller.
- - clock-names:		List of clock names which are exteral input clocks
-			to the given clock controller. Please refer to the
-			clock bindings for more details.
-
-Input clocks for zynqmp Ultrascale+ clock controller:
-
-The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
-inputs. These required clock inputs are:
- - pss_ref_clk (PS reference clock)
- - video_clk (reference clock for video system )
- - pss_alt_ref_clk (alternative PS reference clock)
- - aux_ref_clk
- - gt_crx_ref_clk (transceiver reference clock)
-
-The following strings are optional parameters to the 'clock-names' property in
-order to provide an optional (E)MIO clock source:
- - swdt0_ext_clk
- - swdt1_ext_clk
- - gem0_emio_clk
- - gem1_emio_clk
- - gem2_emio_clk
- - gem3_emio_clk
- - mio_clk_XX		# with XX = 00..77
- - mio_clk_50_or_51	#for the mux clock to gem tsu from 50 or 51
-
-
-Output clocks are registered based on clock information received
-from firmware. Output clocks indexes are mentioned in
-include/dt-bindings/clock/xlnx,zynqmp-clk.h.
-
 -------
 Example
 -------
@@ -72,11 +25,6 @@ firmware {
 	zynqmp_firmware: zynqmp-firmware {
 		compatible = "xlnx,zynqmp-firmware";
 		method = "smc";
-		zynqmp_clk: clock-controller {
-			#clock-cells = <1>;
-			compatible = "xlnx,zynqmp-clk";
-			clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
-			clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
-		};
+		...
 	};
 };