Merge tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.12 series:

   - A new driver for the TZ1090 PDC which is used on the metag
     architecture.

   - A new driver for the Kontron ETX or COMexpress GPIO block.  This is
     found on some ETX x86 devices.

   - A new driver for the Fintek Super-I/O chips, used on some x86
     boards.

   - Added device tree probing on a few select GPIO blocks.

   - Drop the Exynos support from the Samsung GPIO driver.

     The Samsung maintainers have moved over to use the modernized pin
     control driver to provide GPIO for the modern platforms instead.

   - The usual bunch of non-critical fixes and cleanups"

* tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits)
  gpio: return -ENOTSUPP if debounce cannot be set
  gpio: improve error path in gpiolib
  gpio: add GPIO support for F71882FG and F71889F
  of: add vendor prefix for Microchip Technology Inc
  gpio: mcp23s08: rename the device tree property
  gpio: samsung: Drop support for Exynos SoCs
  gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init()
  gpio: pcf857x: Sort headers alphabetically
  gpio: max7301: Reverting "Do not force SPI speed when using OF Platform"
  gpio: Fix bit masking in Kontron PLD GPIO driver
  gpio: pca953x: fix gpio input on gpio offsets >= 8
  drivers/gpio: simplify use of devm_ioremap_resource
  drivers/gpio/gpio-omap.c: convert comma to semicolon
  gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable
  gpio: Fix platform driver name in Kontron PLD GPIO driver
  gpio: adnp: Fix segfault if request_threaded_irq fails
  gpio: msm: Staticize local variable 'msm_gpio'
  gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index
  gpio: use dev_get_platdata()
  gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler
  ...

1 files changed, 45 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
new file mode 100644
index 000000000000..1fd98ffa8cb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt
@@ -0,0 +1,45 @@
+ImgTec TZ1090 PDC GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "img,tz1090-pdc-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region. This starts at and cover the SOC_GPIO_CONTROL registers.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+
+- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
+  nodes should have the following values.
+     <[phandle of the gpio controller node]
+      [PDC gpio number]
+      [gpio flags]>
+
+  Values for gpio specifier:
+  - GPIO number: a value in the range 0 to 6.
+  - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
+    Only the following flags are supported:
+      GPIO_ACTIVE_HIGH
+      GPIO_ACTIVE_LOW
+
+Optional properties:
+- gpio-ranges: Mapping to pin controller pins (as described in
+  Documentation/devicetree/bindings/gpio/gpio.txt)
+
+- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt)
+
+
+Example:
+
+	pdc_gpios: gpio-controller@02006500 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		compatible = "img,tz1090-pdc-gpio";
+		reg = <0x02006500 0x100>;
+
+		interrupt-parent = <&pdc>;
+		interrupts =	<8  IRQ_TYPE_NONE>,	/* Syswake 0 */
+				<9  IRQ_TYPE_NONE>,	/* Syswake 1 */
+				<10 IRQ_TYPE_NONE>;	/* Syswake 2 */
+		gpio-ranges = <&pdc_pinctrl 0 0 7>;
+	};