diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2015-09-12 12:52:49 +0200 |
|---|---|---|
| committer | Rob Herring <robh@kernel.org> | 2015-09-17 14:36:37 -0500 |
| commit | 31b47ae3f18b31d86f553198e624b3b38f6397a2 (patch) | |
| tree | 8008dfdc8c58da9bf890641f1d79757c712b87a9 /Documentation/devicetree/bindings/iio | |
| parent | 9fa04fbeb78eab6f3817e444644348c46c7e2370 (diff) | |
devicetree: bindings: Extend the bma180 bindings with bma250 info
The bma180 / bma250 accelerometers share a driver (at least under Linux),
so it makes sense to also have their bindings info in a single .txt.
This commit extends the bma180 bindings with bma250 bindings, specifically
it specifies how the 2 seperate interrupts the bma250 has must be listed
in devicetree. The existing bma180 driver is already fully compatible
with the specified bindings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/accel/bma180.txt | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt index c5933573e0f6..4a3679d54457 100644 --- a/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -1,10 +1,11 @@ -* Bosch BMA180 triaxial acceleration sensor +* Bosch BMA180 / BMA250 triaxial acceleration sensor http://omapworld.com/BMA180_111_1002839.pdf +http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf Required properties: - - compatible : should be "bosch,bma180" + - compatible : should be "bosch,bma180" or "bosch,bma250" - reg : the I2C address of the sensor Optional properties: @@ -13,6 +14,9 @@ Optional properties: - interrupts : interrupt mapping for GPIO IRQ, it should by configured with flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING + For the bma250 the first interrupt listed must be the one + connected to the INT1 pin, the second (optional) interrupt + listed must be the one connected to the INT2 pin. Example: |