Merge branch 'elan-i2c' into next

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

5 files changed, 138 insertions, 29 deletions

diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index b98bf9363c8f..2384465eaa19 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -26,6 +26,8 @@ required:
   - compatible
   - enable-gpios
 
+additionalProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 000000000000..5625c222903a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+  ing capabilities that can facilitate a variety of contactless key and switch
+  applications.
+
+  These functions are collectively represented by a "keys" child node from the
+  parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+  further details and examples. Sensor hardware configuration (self-capacitive
+  vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-keys
+      - azoteq,iqs621-keys
+      - azoteq,iqs622-keys
+      - azoteq,iqs624-keys
+      - azoteq,iqs625-keys
+
+  linux,keycodes:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - minItems: 1
+        maxItems: 16
+    description: |
+      Specifies the numeric keycodes associated with each available touch or
+      proximity event according to the following table. An 'x' indicates the
+      event is supported for a given device. Specify 0 for unused events.
+
+      -------------------------------------------------------------------------
+      | #  | Event              | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+      -------------------------------------------------------------------------
+      | 0  | CH0 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 1  | CH0 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 2  | CH1 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Ant. 1 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 3  | CH1 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      -------------------------------------------------------------------------
+      | 4  | CH2 Touch          |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 5  | CH2 Proximity      |    x    |        |        |        |        |
+      |    | Antenna 2 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 6  | Metal (+) Touch**  |    x    |    x   |        |        |        |
+      |    | Ant. 2 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 7  | Metal (+) Prox.**  |    x    |    x   |        |        |        |
+      |    | Antenna 2 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 8  | Metal (-) Touch**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 9  | Metal (-) Prox.**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 10 | SAR Active***      |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 11 | SAR Quick Rel.***  |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 12 | SAR Movement***    |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 13 | SAR Filter Halt*** |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 14 | Wheel Up           |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      | 15 | Wheel Down         |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      *   Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+          if enabled via firmware.
+      **  "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+          where "LTA" is defined as the channel's long-term average.
+      *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+          via firmware.
+
+patternProperties:
+  "^hall-switch-(north|south)$":
+    type: object
+    description:
+      Represents north/south-field Hall-effect sensor touch or proximity
+      events. Note that north/south-field orientation is reversed on the
+      IQS620AXzCSR device due to its flip-chip package.
+
+    properties:
+      linux,code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Numeric switch code associated with the event.
+
+      azoteq,use-prox:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If present, specifies that Hall-effect sensor reporting should
+          use the device's wide-range proximity threshold instead of its
+          close-range touch threshold (default).
+
+    required:
+      - linux,code
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs624-keys
+          - azoteq,iqs625-keys
+then:
+  patternProperties:
+    "^hall-switch-(north|south)$": false
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 2f2e0b6ebbbd..3a2ad6ec64db 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -33,3 +33,6 @@ properties:
 
 required:
   - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
deleted file mode 100644
index eb8e83736c02..000000000000
--- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-STMicroelectronics STPMIC1 Onkey
-
-Required properties:
-
-- compatible = "st,stpmic1-onkey";
-- interrupts: interrupt line to use
-- interrupt-names = "onkey-falling", "onkey-rising"
-	onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
-	onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
-
-Optional properties:
-
-- st,onkey-clear-cc-flag: onkey is able power on after an
-  over-current shutdown event.
-- st,onkey-pu-inactive: onkey pull up is not active
-- power-off-time-sec: Duration in seconds which the key should be kept
-        pressed for device to power off automatically (from 1 to 16 seconds).
-        see See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-onkey {
-	compatible = "st,stpmic1-onkey";
-	interrupt-parent = <&pmic>;
-	interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
-	interrupt-names = "onkey-falling", "onkey-rising";
-	power-off-time-sec = <10>;
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 8d58709d4b47..383d64a91854 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -109,7 +109,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       edt-ft5x06@38 {