dt-bindings: Fix JSON pointers

The correct syntax for JSON pointers begins with a '/' after the '#'.
Without a '/', the string should be interpreted as a subschema
identifier. The jsonschema module currently doesn't handle subschema
identifiers and incorrectly allows JSON pointers to begin without a '/'.
Let's fix this before it becomes a problem when jsonschema module is
fixed.

Converted with:
perl -p -i -e 's/yaml#definitions/yaml#\/definitions/g' `find Documentation/devicetree/bindings/ -name "*.yaml"`

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: netdev@vger.kernel.org
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201217223429.354283-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

3 files changed, 15 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
index bc817f77d2b1..702ba350d869 100644
--- a/Documentation/devicetree/bindings/leds/backlight/common.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -22,7 +22,7 @@ properties:
       The default brightness that should be applied to the LED by the operating
       system on start-up. The brightness should not exceed the brightness the
       LED can provide.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   max-brightness:
     description:
@@ -31,6 +31,6 @@ properties:
       on the brightness apart from what the driver says, as it could happen
       that a LED can be made so bright that it gets damaged or causes damage
       due to restrictions in a specific system, such as mounting conditions.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f1211e7045f1..b1f363747a62 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -27,21 +27,21 @@ properties:
       List of device current outputs the LED is connected to. The outputs are
       identified by the numbers that must be defined in the LED device binding
       documentation.
-    $ref: /schemas/types.yaml#definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   function:
     description:
       LED function. Use one of the LED_FUNCTION_* prefixed definitions
       from the header include/dt-bindings/leds/common.h. If there is no
       matching LED_FUNCTION available, add a new one.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
   color:
     description:
       Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
       the header include/dt-bindings/leds/common.h. If there is no matching
       LED_COLOR_ID available, add a new one.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 9
 
@@ -49,7 +49,7 @@ properties:
     description:
       Integer to be used when more than one instance of the same function is
       needed, differing only with an ordinal number.
-    $ref: /schemas/types.yaml#definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   label:
     description:
@@ -66,7 +66,7 @@ properties:
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - on
       - off
@@ -77,7 +77,7 @@ properties:
     description:
       This parameter, if present, is a string defining the trigger assigned to
       the LED.
-    $ref: /schemas/types.yaml#definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
 
     enum:
         # LED will act as a back-light, controlled by the framebuffer system
@@ -109,7 +109,7 @@ properties:
           brightness and duration (in ms).  The exact format is
           described in:
           Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-    $ref: /schemas/types.yaml#definitions/uint32-matrix
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       minItems: 2
       maxItems: 2
@@ -143,7 +143,7 @@ properties:
       the device tree and be referenced by a phandle and a set of phandle
       arguments. A length of arguments should be specified by the
       #trigger-source-cells property in the source node.
-    $ref: /schemas/types.yaml#definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
   # Required properties for flash LED child nodes:
   flash-max-microamp:
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index 58e974793a79..f552cd143d5b 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -35,7 +35,7 @@ properties:
     description: I2C slave address
 
   clock-mode:
-    $ref: /schemas/types.yaml#definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/uint8
     description: |
       Input clock mode
     enum:
@@ -49,7 +49,7 @@ properties:
       GPIO attached to the chip's enable pin
 
   pwr-sel:
-    $ref: /schemas/types.yaml#definitions/uint8
+    $ref: /schemas/types.yaml#/definitions/uint8
     description: |
       LP8501 specific property. Power selection for output channels.
     enum:
@@ -70,14 +70,14 @@ patternProperties:
     $ref: common.yaml#
     properties:
       led-cur:
-        $ref: /schemas/types.yaml#definitions/uint8
+        $ref: /schemas/types.yaml#/definitions/uint8
         description: |
           Current setting at each LED channel (mA x10, 0 if LED is not connected)
         minimum: 0
         maximum: 255
 
       max-cur:
-        $ref: /schemas/types.yaml#definitions/uint8
+        $ref: /schemas/types.yaml#/definitions/uint8
         description: Maximun current at each LED channel.
 
       reg:
@@ -97,7 +97,7 @@ patternProperties:
           - 8 # LED output D9
 
       chan-name:
-        $ref: /schemas/types.yaml#definitions/string
+        $ref: /schemas/types.yaml#/definitions/string
         description: name of channel
 
 required: