summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/memory-controllers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 16:05:01 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 16:05:01 -0800
commitcf9b0772f2e410645fece13b749bd56505b998b8 (patch)
tree8b171a2c49d1e9e41d4e43fb91602e664cde8551 /Documentation/devicetree/bindings/memory-controllers
parent527d1470744d338c912f94bc1f4dba08ffdff349 (diff)
parent339cd0ea082287ea8e2b7e7159a5a33665a2cbe3 (diff)
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers')
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt27
1 files changed, 27 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
new file mode 100644
index 000000000000..82d923ef413f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt
@@ -0,0 +1,27 @@
+DDR PHY Front End (DPFE) for Broadcom STB
+=========================================
+
+DPFE and the DPFE firmware provide an interface for the host CPU to
+communicate with the DCPU, which resides inside the DDR PHY.
+
+There are three memory regions for interacting with the DCPU. These are
+specified in a single reg property.
+
+Required properties:
+ - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
+ or "brcm,dpfe-cpu"
+ - reg: must reference three register ranges
+ - start address and length of the DCPU register space
+ - start address and length of the DCPU data memory space
+ - start address and length of the DCPU instruction memory space
+ - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
+ they must be in the same order as the register declarations
+
+Example:
+ dpfe_cpu0: dpfe-cpu@f1132000 {
+ compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
+ reg = <0xf1132000 0x180
+ 0xf1134000 0x1000
+ 0xf1138000 0x4000>;
+ reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
+ };