diff options
| author | Mark Jackson <mpfj-list@newflow.co.uk> | 2013-04-19 21:08:28 +0100 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2013-05-16 08:53:22 -0700 |
| commit | 496c8a0bbb726c2608b3b1318d231ab04a9a2ec3 (patch) | |
| tree | 2e8bea0925efe644bb64fec913329c10eb9576a1 /Documentation/devicetree/bindings/mtd/gpmc-nand.txt | |
| parent | 4d5843616d16eb1a5851a976ec82b8d436233ad7 (diff) | |
ARM: OMAP2+: Allow NAND transfer mode to be specified in DT
OMAP devices support various NAND transfer modes.
Currently all device-tree definitions will use the default "prefetch
polled" mode, so this patch enables the transfer mode to be specified
in the device-tree.
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Acked-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/gpmc-nand.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 6a983c1d87cd..df338cb5059c 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -29,6 +29,13 @@ Optional properties: "bch4" 4-bit BCH ecc code "bch8" 8-bit BCH ecc code + - ti,nand-xfer-type: A string setting the data transfer type. One of: + + "prefetch-polled" Prefetch polled mode (default) + "polled" Polled mode, without prefetch + "prefetch-dma" Prefetch enabled sDMA mode + "prefetch-irq" Prefetch enabled irq mode + - elm_id: Specifies elm device node. This is required to support BCH error correction using ELM module. @@ -55,6 +62,7 @@ Example for an AM33xx board: reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; |