summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net/ti,dp83867.txt
diff options
context:
space:
mode:
authorMurali Karicheri <m-karicheri2@ti.com>2017-07-04 16:23:23 +0530
committerDavid S. Miller <davem@davemloft.net>2017-07-05 09:23:53 +0100
commit908a7733250a2ebcacfafb2ebe0f25c853ac7fdc (patch)
tree887383909719ee2c76a22ce4ab4731570ee4ec5d /Documentation/devicetree/bindings/net/ti,dp83867.txt
parenta778427efc67490b6ee7ea4593065dede4445fb6 (diff)
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017, advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not supported (see note below Table 5 (4-Level Strap Pins)). It further advises that if a board has this pin strapped in mode 1 and mode 2, then to ensure proper operation of the PHY, a software workaround must be implemented. Since it is not possible to detect in software if RX_DV/RX_CTRL pin is incorrectly strapped, add a device-tree property for the board to advertise this and allow corrective action in software. [1] http://www.ti.com/lit/ds/snls484e/snls484e.pdf Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> [nsekhar@ti.com: rebase to mainline, split documentation into separate patch] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings/net/ti,dp83867.txt')
-rw-r--r--Documentation/devicetree/bindings/net/ti,dp83867.txt7
1 files changed, 7 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index afe9630a5e7d..02c4353b5cf2 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -18,6 +18,13 @@ Optional property:
- ti,max-output-impedance - MAC Interface Impedance control to set
the programmable output impedance to
maximum value (70 ohms).
+ - ti,dp83867-rxctrl-strap-quirk - This denotes the fact that the
+ board has RX_DV/RX_CTRL pin strapped in
+ mode 1 or 2. To ensure PHY operation,
+ there are specific actions that
+ software needs to take when this pin is
+ strapped in these modes. See data manual
+ for details.
Note: ti,min-output-impedance and ti,max-output-impedance are mutually
exclusive. When both properties are present ti,max-output-impedance