dt-bindings: Remove "status" from schema examples

There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).

Enabling qca,ar71xx causes a warning, so let's fix the node names:

Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
        From schema: schemas/phy/phy-provider.yaml

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210720172025.363238-1-robh@kernel.org

4 files changed, 5 insertions, 26 deletions

diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..08a3f1f6aea2 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,7 +116,6 @@ examples:
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
-        status = "okay";
 
         mdio0 {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@ examples:
     ethernet@c8009000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc8009000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 4>;
       queue-txready = <&qmgr 21>;
       intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@ examples:
     ethernet@c800c000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc800c000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 3>;
       queue-txready = <&qmgr 20>;
       intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@ examples:
   # UART example on Raspberry Pi
   - |
     uart0 {
-        status = "okay";
-
         nfc {
             compatible = "samsung,s3fwrn82";
 
             en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 
-            status = "okay";
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@ examples:
 
         phy-mode = "gmii";
 
-        status = "disabled";
-
         fixed-link {
             speed = <1000>;
             full-duplex;
@@ -148,32 +146,24 @@ examples:
                         reg = <0x1>;
                         phy-handle = <&phy_port0>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port2: port@2 {
                         reg = <0x2>;
                         phy-handle = <&phy_port1>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port3: port@3 {
                         reg = <0x3>;
                         phy-handle = <&phy_port2>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port4: port@4 {
                         reg = <0x4>;
                         phy-handle = <&phy_port3>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
                 };
 
@@ -183,34 +173,29 @@ examples:
 
                     interrupt-parent = <&switch10>;
 
-                    phy_port0: phy@0 {
+                    phy_port0: ethernet-phy@0 {
                         reg = <0x0>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port1: phy@1 {
+                    phy_port1: ethernet-phy@1 {
                         reg = <0x1>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port2: phy@2 {
+                    phy_port2: ethernet-phy@2 {
                         reg = <0x2>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port3: phy@3 {
+                    phy_port3: ethernet-phy@3 {
                         reg = <0x3>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port4: phy@4 {
+                    phy_port4: ethernet-phy@4 {
                         reg = <0x4>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
                 };
             };