Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...

3 files changed, 36 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
index 99c4ba6a3f61..cfb18b4ef8f7 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@@ -8,11 +8,12 @@ Required properties:
   "allwinner,sun8i-h3-sid"
   "allwinner,sun50i-a64-sid"
   "allwinner,sun50i-h5-sid"
+  "allwinner,sun50i-h6-sid"
 
 - reg: Should contain registers location and length
 
 = Data cells =
-Are child nodes of qfprom, bindings of which as described in
+Are child nodes of sunxi-sid, bindings of which as described in
 bindings/nvmem/nvmem.txt
 
 Example for sun4i:
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 7a999a135e56..68f7d6fdd140 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -1,7 +1,8 @@
 Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
 
 This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs.
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
+i.MX7D/S, i.MX7ULP and i.MX8MQ SoCs.
 
 Required properties:
 - compatible: should be one of
@@ -13,6 +14,7 @@ Required properties:
 	"fsl,imx7d-ocotp" (i.MX7D/S),
 	"fsl,imx6sll-ocotp" (i.MX6SLL),
 	"fsl,imx7ulp-ocotp" (i.MX7ULP),
+	"fsl,imx8mq-ocotp" (i.MX8MQ),
 	followed by "syscon".
 - #address-cells : Should be 1
 - #size-cells : Should be 1
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
new file mode 100644
index 000000000000..142a51d5a9be
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
@@ -0,0 +1,31 @@
+STMicroelectronics STM32 Factory-programmed data device tree bindings
+
+This represents STM32 Factory-programmed read only non-volatile area: locked
+flash, OTP, read-only HW regs... This contains various information such as:
+analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2),
+internal vref (VREFIN_CAL), unique device ID...
+
+Required properties:
+- compatible:		Should be one of:
+			"st,stm32f4-otp"
+			"st,stm32mp15-bsec"
+- reg:			Offset and length of factory-programmed area.
+- #address-cells:	Should be '<1>'.
+- #size-cells:		Should be '<1>'.
+
+Optional Data cells:
+- Must be child nodes as described in nvmem.txt.
+
+Example on stm32f4:
+	romem: nvmem@1fff7800 {
+		compatible = "st,stm32f4-otp";
+		reg = <0x1fff7800 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells: ts_cal1 at 0x1fff7a2c */
+		ts_cal1: calib@22c {
+			reg = <0x22c 0x2>;
+		};
+		...
+	};