dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding

The NVIDIA Tegra XUSB pad controller provides a set of pads, each with a
set of lanes that are used for PCIe, SATA and USB.

A binding exists for the XUSB pad controller already, but it turned out
not to be flexible enough to describe all aspects of the controller. In
particular, the addition of XUSB support (for SuperSpeed USB) has shown
that the existing binding is no longer suitable. Mark the old binding
as deprecated and link to the new binding.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 392 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 000000000000..6a5bb4311cfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,392 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+signals) which connect directly to pins/pads on the SoC package. Each lane
+is controlled by a HW block referred to as a "pad" in the Tegra hardware
+documentation. Each such "pad" may control either one or multiple lanes,
+and thus contains any logic common to all its lanes. Each lane can be
+separately configured and powered up.
+
+Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+super-speed USB. Other lanes are for various types of low-speed, full-speed
+or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+contains a software-configurable mux that sits between the I/O controller
+ports (e.g. PCIe) and the lanes.
+
+In addition to per-lane configuration, USB 3.0 ports may require additional
+settings on a per-board basis.
+
+Pads will be represented as children of the top-level XUSB pad controller
+device tree node. Each lane exposed by the pad will be represented by its
+own subnode and can be referenced by users of the lane using the standard
+PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+The Tegra hardware documentation refers to the connection between the XUSB
+pad controller and the XUSB controller as "ports". This is confusing since
+"port" is typically used to denote the physical USB receptacle. The device
+tree binding in this document uses the term "port" to refer to the logical
+abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+USB 3.0 receptacles, ...).
+
+Required properties:
+--------------------
+- compatible: Must be:
+  - Tegra124: "nvidia,tegra124-xusb-padctl"
+  - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+- reset-names: Must include the following entries:
+  - "padctl"
+
+
+Pad nodes:
+==========
+
+A required child node named "pads" contains a list of subnodes, one for each
+of the pads exposed by the XUSB pad controller. Each pad may need additional
+resources that can be referenced in its pad node.
+
+The "status" property is used to enable or disable the use of a pad. If set
+to "disabled", the pad will not be used on the given board. In order to use
+the pad and any of its lanes, this property must be set to "okay".
+
+For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie
+and sata. No extra resources are required for operation of these pads.
+
+
+PHY nodes:
+==========
+
+Each pad node has a child named "lanes" that contains one or more children of
+its own, each representing one of the lanes controlled by the pad.
+
+Required properties:
+--------------------
+- status: Defines the operation status of the PHY. Valid values are:
+  - "disabled": the PHY is disabled
+  - "okay": the PHY is enabled
+- #phy-cells: Should be 0. Since each lane represents a single PHY, there is
+  no need for an additional specifier.
+- nvidia,function: The output function of the PHY. See below for a list of
+  valid functions per SoC generation.
+
+For Tegra124 and Tegra132, the list of valid PHY nodes is given below:
+- usb2: usb2-0, usb2-1, usb2-2
+  - functions: "snps", "xusb", "uart"
+- ulpi: ulpi-0
+  - functions: "snps", "xusb"
+- hsic: hsic-0, hsic-1
+  - functions: "snps", "xusb"
+- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4
+  - functions: "pcie", "usb3-ss"
+- sata: sata-0
+  - functions: "usb3-ss", "sata"
+
+
+Port nodes:
+===========
+
+A required child node named "ports" contains a list of all the ports exposed
+by the XUSB pad controller. Per-port configuration is only required for USB.
+
+USB2 ports:
+-----------
+
+Required properties:
+- status: Defines the operation status of the port. Valid values are:
+  - "disabled": the port is disabled
+  - "okay": the port is enabled
+- mode: A string that determines the mode in which to run the port. Valid
+  values are:
+  - "host": for USB host mode
+  - "device": for USB device mode
+  - "otg": for USB OTG mode
+
+Optional properties:
+- nvidia,internal: A boolean property whose presence determines that a port
+  is internal. In the absence of this property the port is considered to be
+  external.
+- vbus-supply: phandle to a regulator supplying the VBUS voltage.
+
+ULPI ports:
+-----------
+
+Optional properties:
+- status: Defines the operation status of the port. Valid values are:
+  - "disabled": the port is disabled
+  - "okay": the port is enabled
+- nvidia,internal: A boolean property whose presence determines that a port
+  is internal. In the absence of this property the port is considered to be
+  external.
+- vbus-supply: phandle to a regulator supplying the VBUS voltage.
+
+HSIC ports:
+-----------
+
+Required properties:
+- status: Defines the operation status of the port. Valid values are:
+  - "disabled": the port is disabled
+  - "okay": the port is enabled
+
+Optional properties:
+- vbus-supply: phandle to a regulator supplying the VBUS voltage.
+
+Super-speed USB ports:
+----------------------
+
+Required properties:
+- status: Defines the operation status of the port. Valid values are:
+  - "disabled": the port is disabled
+  - "okay": the port is enabled
+- nvidia,usb2-companion: A single cell that specifies the physical port number
+  to map this super-speed USB port to. The range of valid port numbers varies
+  with the SoC generation:
+  - 0-2: for Tegra124 and Tegra132
+
+Optional properties:
+- nvidia,internal: A boolean property whose presence determines that a port
+  is internal. In the absence of this property the port is considered to be
+  external.
+
+For Tegra124 and Tegra132, the XUSB pad controller exposes the following
+ports:
+- 3x USB2: usb2-0, usb2-1, usb2-2
+- 1x ULPI: ulpi-0
+- 2x HSIC: hsic-0, hsic-1
+- 2x super-speed USB: usb3-0, usb3-1
+
+
+Examples:
+=========
+
+Tegra124 and Tegra132:
+----------------------
+
+SoC include:
+
+	padctl@7009f000 {
+		/* for Tegra124 */
+		compatible = "nvidia,tegra124-xusb-padctl";
+		/* for Tegra132 */
+		compatible = "nvidia,tegra132-xusb-padctl",
+			     "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			ulpi-0 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
+	};
+
+Board file:
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			/* Micro A/B */
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+			};
+
+			/* Mini PCIe */
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			/* USB3 */
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,port = <2>;
+				status = "okay";
+			};
+		};
+	};