Merge tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to prepare for making omap3 device tree only:

- Always build in board-generic, and add pdata quirks and auxdata
  support for it so we have all the pdata related quirks
  in the same place.

- Merge of the drivers/pinctrl changes that are needed for PM
  to continue working on omap3 and also needed for other omaps
  eventually. The three pinctrl related patches have been acked
  by Linus Walleij and are pulled into both the pinctrl tree
  and this branch.

- Few defconfig related changes for drivers needed.

* tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits)
  ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
  ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig
  ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it
  ARM: OMAP2+: Add minimal 8250 support for GPMC
  ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3
  ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
  ARM: OMAP2+: Add support for auxdata
  pinctrl: single: Add support for auxdata
  pinctrl: single: Add support for wake-up interrupts
  pinctrl: single: Prepare for supporting SoC specific features
  ARM: OMAP2+: igep0020: use display init from dss-common
  ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
  +Linux 3.12-rc4

Signed-off-by: Kevin Hilman <khilman@linaro.org>

1 files changed, 11 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 5a02e30dd262..7069a0b84e3a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -72,6 +72,13 @@ Optional properties:
 		/* pin base, nr pins & gpio function */
 		pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
 
+- interrupt-controller : standard interrupt controller binding if using
+  interrupts for wake-up events for example. In this case pinctrl-single
+  is set up as a chained interrupt controller and the wake-up interrupts
+  can be requested by the drivers using request_irq().
+
+- #interrupt-cells : standard interrupt binding if using interrupts
+
 This driver assumes that there is only one register for each pin (unless the
 pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
@@ -121,6 +128,8 @@ pmx_core: pinmux@4a100040 {
 	reg = <0x4a100040 0x0196>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };
@@ -131,6 +140,8 @@ pmx_wkup: pinmux@4a31e040 {
 	reg = <0x4a31e040 0x0038>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };