Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...

1 files changed, 93 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
new file mode 100644
index 000000000000..e6bbfccd56c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -0,0 +1,93 @@
+UniPhier reset controller
+
+
+System reset
+------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	sysctrl@61840000 {
+		compatible = "socionext,uniphier-ld20-sysctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x61840000 0x4000>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+
+Media I/O (MIO) reset
+---------------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	mioctrl@59810000 {
+		compatible = "socionext,uniphier-ld20-mioctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59810000 0x800>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-mio-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+
+Peripheral reset
+----------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+- #reset-cells: should be 1.
+
+Example:
+
+	perictrl@59820000 {
+		compatible = "socionext,uniphier-ld20-perictrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59820000 0x200>;
+
+		reset {
+			compatible = "socionext,uniphier-ld20-peri-reset";
+			#reset-cells = <1>;
+		};
+
+		other nodes ...
+	};