Merge tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Refine reserved memory nomap handling

 - Merge some PCI and non-PCI address handling implementations

 - Simplify of_address.h header ifdefs

 - Improve printk handling of some 64-bit types

 - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
   VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
   linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
   pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
   renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
   OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
   to DT schema

 - Convert mux and mux controller bindings to schema. This includes MDIO
   IIO, and I2C muxes.

 - Add Arm PL031 RTC binding schema

 - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd

 - Fix some stale doc references

 - Remove stale property-units.txt. Superseded by schema in dt-schema
   repo.

 - Fixes for 'unevaluatedProperties' handling (enabled with experimental
   json-schema support)

 - Drop redundant usage of minItems and maxItems across the tree

 - Update some examples to use bindings with a schema

* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
  dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
  dt-bindings: display: renesas,du: Fix 'ports' reference
  dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
  dt-bindings: crypto: ccree: Convert to json-schema
  dt-bindings: fpga: zynq: convert bindings to YAML
  dt-bindings: rtc: zynqmp: convert bindings to YAML
  dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  of: of_reserved_mem: mark nomap memory instead of removing
  of: of_reserved_mem: only call memblock_free for normal reserved memory
  dt-bindings: Drop redundant minItems/maxItems
  dt-bindings: spmi: Correct 'reg' schema
  of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
  dt-bindings: clk: vc5: Fix example
  dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
  dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
  dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
  of: Remove superfluous casts when printing u64 values
  of: Fix truncation of memory sizes on 32-bit platforms
  dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
  dt-bindings: pwm: Use examples with documented/matching schema
  ...

4 files changed, 59 insertions, 68 deletions

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 84671950ca0d..4663c2bcad50 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -164,7 +164,6 @@ patternProperties:
 
       interrupts:
         minItems: 1
-        maxItems: 2
         items:
           - description: UART core irq
           - description: Wakeup irq (RX GPIO)
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
deleted file mode 100644
index 6217e64309de..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Texas Instruments TI-SCI Generic Power Domain
----------------------------------------------
-
-Some TI SoCs contain a system controller (like the PMMC, etc...) that is
-responsible for controlling the state of the IPs that are present.
-Communication between the host processor running an OS and the system
-controller happens through a protocol known as TI-SCI [1].
-
-[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-PM Domain Node
-==============
-The PM domain node represents the global PM domain managed by the PMMC, which
-in this case is the implementation as documented by the generic PM domain
-bindings in Documentation/devicetree/bindings/power/power-domain.yaml.  Because
-this relies on the TI SCI protocol to communicate with the PMMC it must be a
-child of the pmmc node.
-
-Required Properties:
---------------------
-- compatible: should be "ti,sci-pm-domain"
-- #power-domain-cells: Can be one of the following:
-			1: Containing the device id of each node
-			2: First entry should be device id
-			   Second entry should be one of the floowing:
-			   TI_SCI_PD_EXCLUSIVE: To allow device to be
-						exclusively controlled by
-						the requesting hosts.
-			   TI_SCI_PD_SHARED: To allow device to be shared
-					     by multiple hosts.
-
-Example (K2G):
--------------
-	pmmc: pmmc {
-		compatible = "ti,k2g-sci";
-		...
-
-		k2g_pds: power-controller {
-			compatible = "ti,sci-pm-domain";
-			#power-domain-cells = <1>;
-		};
-	};
-
-PM Domain Consumers
-===================
-Hardware blocks belonging to a PM domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding PM domain node
-along with an index representing the device id to be passed to the PMMC
-for device control.
-
-Required Properties:
---------------------
-- power-domains: phandle pointing to the corresponding PM domain node
-		 and an ID representing the device.
-
-See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list
-of valid identifiers for k2g.
-
-Example (K2G):
---------------------
-	uart0: serial@2530c00 {
-		compatible = "ns16550a";
-		...
-		power-domains = <&k2g_pds 0x002c>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
new file mode 100644
index 000000000000..9e6cb4ee9755
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI generic power domain node bindings
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+allOf:
+  - $ref: /schemas/power/power-domain.yaml#
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This PM domain node represents the global PM domain managed by the TI-SCI
+  controller. Since this relies on the TI SCI protocol to communicate with
+  the TI-SCI controller, it must be a child of the TI-SCI controller node.
+
+properties:
+  compatible:
+    const: ti,sci-pm-domain
+
+  "#power-domain-cells":
+    enum: [1, 2]
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell, if cell-value is 2, should be one of the following
+      TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled
+      or
+      TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts.
+      Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k2g_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <1>;
+    };
+
+  - |
+    k3_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index dbc62821c60b..9790617af1bc 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -100,7 +100,6 @@ patternProperties:
     properties:
       reg:
         minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
-        maxItems: 3
         items:
           - description: Address and size of the Data RAM0.
           - description: Address and size of the Data RAM1.
@@ -111,7 +110,6 @@ patternProperties:
 
       reg-names:
         minItems: 2
-        maxItems: 3
         items:
           - const: dram0
           - const: dram1