diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2018-03-03 22:43:02 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-03-09 09:43:52 -0800 |
| commit | 05db0dcc70c61bb51d01845e558bd43add5d55bb (patch) | |
| tree | 1fb804a9bcb37890c24a47aa61603f855d18355b /Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | |
| parent | 01812ba34a9a7756a46a54f25ba0f02e727ff35c (diff) | |
dt-bindings: usb: add the documentation for USB HCDs
A USB HCD may have several PHYs which need to be configured before the
the HCD starts working.
This adds the documentation for such a USB HCD as well as a reference to
the new "usb-hcd.txt" from all bindings that implement a USB HCD which
support one USB PHY per port.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree/bindings/usb/mediatek,mtu3.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index d589a1ef96a1..3382b5cb471d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -17,7 +17,7 @@ Required properties: - clock-names : must contain "sys_ck" for clock of controller, the following clocks are optional: "ref_ck", "mcu_ck" and "dam_ck"; - - phys : a list of phandle + phy specifier pairs + - phys : see usb-hcd.txt in the current directory - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -53,6 +53,9 @@ Optional properties: - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, bit1 for u3port1, ... etc; +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example if host mode is enabled. The DT binding details of xhci can be found in: |