Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

1 files changed, 34 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
new file mode 100644
index 000000000000..d7e272671c7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -0,0 +1,34 @@
+USB NOP PHY
+
+Required properties:
+- compatible: should be usb-nop-xceiv
+
+Optional properties:
+- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
+  /bindings/clock/clock-bindings.txt
+  This property is required if clock-frequency is specified.
+
+- clock-names: Should be "main_clk"
+
+- clock-frequency: the clock frequency (in Hz) that the PHY clock must
+  be configured to.
+
+- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+
+- reset-supply: phandle to the regulator that provides power to the PHY.
+
+Example:
+
+	hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		clock-frequency = <19200000>;
+		clocks = <&osc 0>;
+		clock-names = "main_clk";
+		vcc-supply = <&hsusb1_vcc_regulator>;
+		reset-supply = <&hsusb1_reset_regulator>;
+	};
+
+hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
+and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
+hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
+controls RESET.