dt-bindings: consolidate display related bindings

This is a quite large renaming to consolidate display related bindings
into a single "display" directory from various scattered locations of
video, drm, gpu, fb, mipi, and panel. The prior location was somewhat
based on the Linux driver location, but bindings should be independent
of that.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

2 files changed, 0 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/Documentation/devicetree/bindings/video/bridge/ps8622.txt
deleted file mode 100644
index c989c3807f2b..000000000000
--- a/Documentation/devicetree/bindings/video/bridge/ps8622.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ps8622-bridge bindings
-
-Required properties:
-	- compatible: "parade,ps8622" or "parade,ps8625"
-	- reg: first i2c address of the bridge
-	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
-	- reset-gpios: OF device-tree gpio specification for RST_ pin.
-
-Optional properties:
-	- lane-count: number of DP lanes to use
-	- use-external-pwm: backlight will be controlled by an external PWM
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@48 {
-		compatible = "parade,ps8622";
-		reg = <0x48>;
-		sleep-gpios = <&gpc3 6 1 0 0>;
-		reset-gpios = <&gpc3 1 1 0 0>;
-		lane-count = <1>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba104d..000000000000
--- a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};