Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "We continue ramping up platform support for 64-bit ARM machines, with
  111 individual non-merge changesets touching 21 platforms.

  The LG1312 platform is completely new and is the first ARM platform by
  LG that we support in the mainline kernel.  Two other SoCs got added
  that are updated versions of existing SoC families, so the port mainly
  consists of new dts files:

   - The Hisilicon Hip06/D03 is the latest server platform from
     Huawei/Hisilicon, and follows the Hip05/D02 platform.

   - Rockchip RK3399 follows the 32-bit RK3288 that is popular in
     low-end Chromebooks and the 64-bit RK3368 that is mainly found in
     chinese Android TV boxes.

  The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a
  long-awaited overhaul with a lot of devices enabled in the DT, so it
  should be much more usable with a mainline kernel now.  See also

     https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd

  A lot of work went into enabling new device drivers on existing
  machines, but we also have a couple of new commercially available
  machines:

   - Google Pixel C laptop based on Tegra210
   - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905)
   - Geekbuying GeekBox based on Rockchip RK3368

  And finally, a couple of reference or development platforms that are
  not end-user platforms but are used for trying out the respective SoC
  platforms:

   - Amlogic Meson GXBB P200 and P201 development systems
   - NXP Layerscape 1043A QDS development board
   - Hisilicon Hip06 D03 server board, as mentioned above
   - LG1312 Reference Design
   - RK3399 Evaluation Board"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  arm64: dts: marvell: add XOR node for Armada 3700 SoC
  dt-bindings: document rockchip rk3399-evb board
  arm64: dts: rockchip: add dts file for RK3399 evaluation board
  arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
  dt-bindings: rockchip-dw-mshc: add description for rk3399
  arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
  arm64: dts: marvell: Rename armada-37xx USB node
  arm64: dts: marvell: Clean up armada-3720-db
  Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
  arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
  arm64: dts: hip05: Add nor flash support
  arm64: dts: hip05: fix its node without msi-cells
  arm64: dts: r8a7795: Don't disable referenced optional clocks
  arm64: dts: salvator-x: populate EXTALR
  arm64: dts: r8a7795: enable PCIe on Salvator-X
  arm64: dts: r8a7795: Add PCIe nodes
  arm64: tegra: Add IOMMU node to GM20B on Tegra210
  arm64: tegra: Add reference clock to GM20B on Tegra210
  dt-bindings: Add documentation for GM20B GPU
  dt-bindings: gk20a: Document iommus property
  ...

12 files changed, 310 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 8a5122ab19b0..fcc6f6c10803 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -25,3 +25,6 @@ Board compatible values:
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 752a685d926f..dbbc0952021c 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -135,6 +135,10 @@ LS1043A ARMv8 based RDB Board
 Required root node properties:
     - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
 
+LS1043A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
 LS2080A ARMv8 based Simulator model
 Required root node properties:
     - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index e3ccab114006..83fe816ae050 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -1,29 +1,33 @@
 Hisilicon Platforms Device Tree Bindings
 ----------------------------------------------------
-Hi6220 SoC
-Required root node properties:
-	- compatible = "hisilicon,hi6220";
-
 Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
-HiP04 D01 Board
+Hi6220 SoC
 Required root node properties:
-	- compatible = "hisilicon,hip04-d01";
+	- compatible = "hisilicon,hi6220";
+
+HiKey Board
+Required root node properties:
+	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
 
 HiP01 ca9x2 Board
 Required root node properties:
 	- compatible = "hisilicon,hip01-ca9x2";
 
-HiKey Board
+HiP04 D01 Board
 Required root node properties:
-	- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+	- compatible = "hisilicon,hip04-d01";
 
 HiP05 D02 Board
 Required root node properties:
 	- compatible = "hisilicon,hip05-d02";
 
+HiP06 D03 Board
+Required root node properties:
+	- compatible = "hisilicon,hip06-d03";
+
 Hisilicon system controller
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 585496f203df..715d960d5eea 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -39,6 +39,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "netxeon,r89", "rockchip,rk3288";
 
+- GeekBuying GeekBox:
+    Required root node properties:
+      - compatible = "geekbuying,geekbox", "rockchip,rk3368";
+
 - Google Brain (dev-board):
     Required root node properties:
       - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
@@ -101,4 +105,8 @@ Rockchip platforms device tree bindings
 
 - Rockchip RK3228 Evaluation board:
     Required root node properties:
-      - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+     - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+- Rockchip RK3399 evb:
+    Required root node properties:
+      - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
new file mode 100644
index 000000000000..c82a2e221bc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
@@ -0,0 +1,161 @@
+NVIDIA Tegra186 GPIO controllers
+
+Tegra186 contains two GPIO controllers; a main controller and an "AON"
+controller. This binding document applies to both controllers. The register
+layouts for the controllers share many similarities, but also some significant
+differences. Hence, this document describes closely related but different
+bindings and compatible values.
+
+The Tegra186 GPIO controller allows software to set the IO direction of, and
+read/write the value of, numerous GPIO signals. Routing of GPIO signals to
+package balls is under the control of a separate pin controller HW block. Two
+major sets of registers exist:
+
+a) Security registers, which allow configuration of allowed access to the GPIO
+register set. These registers exist in a single contiguous block of physical
+address space. The size of this block, and the security features available,
+varies between the different GPIO controllers.
+
+Access to this set of registers is not necessary in all circumstances. Code
+that wishes to configure access to the GPIO registers needs access to these
+registers to do so. Code which simply wishes to read or write GPIO data does not
+need access to these registers.
+
+b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
+controllers, these registers are exposed via multiple "physical aliases" in
+address space, each of which access the same underlying state. See the hardware
+documentation for rationale. Any particular GPIO client is expected to access
+just one of these physical aliases.
+
+Tegra HW documentation describes a unified naming convention for all GPIOs
+implemented by the SoC. Each GPIO is assigned to a port, and a port may control
+a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
+name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
+or GPIO_PCC3.
+
+The number of ports implemented by each GPIO controller varies. The number of
+implemented GPIOs within each port varies. GPIO registers within a controller
+are grouped and laid out according to the port they affect.
+
+The mapping from port name to the GPIO controller that implements that port, and
+the mapping from port name to register offset within a controller, are both
+extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
+describes the port-level mapping. In that file, the naming convention for ports
+matches the HW documentation. The values chosen for the names are alphabetically
+sorted within a particular controller. Drivers need to map between the DT GPIO
+IDs and HW register offsets using a lookup table.
+
+Each GPIO controller can generate a number of interrupt signals. Each signal
+represents the aggregate status for all GPIOs within a set of ports. Thus, the
+number of interrupt signals generated by a controller varies as a rough function
+of the number of ports it implements. Note that the HW documentation refers to
+both the overall controller HW module and the sets-of-ports as "controllers".
+
+Each GPIO controller in fact generates multiple interrupts signals for each set
+of ports. Each GPIO may be configured to feed into a specific one of the
+interrupt signals generated by a set-of-ports. The intent is for each generated
+signal to be routed to a different CPU, thus allowing different CPUs to each
+handle subsets of the interrupts within a port. The status of each of these
+per-port-set signals is reported via a separate register. Thus, a driver needs
+to know which status register to observe. This binding currently defines no
+configuration mechanism for this. By default, drivers should use register
+GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+define a property to configure this.
+
+Required properties:
+- compatible
+    Array of strings.
+    One of:
+    - "nvidia,tegra186-gpio".
+    - "nvidia,tegra186-gpio-aon".
+- reg-names
+    Array of strings.
+    Contains a list of names for the register spaces described by the reg
+    property. May contain the following entries, in any order:
+    - "gpio": Mandatory. GPIO control registers. This may cover either:
+        a) The single physical alias that this OS should use.
+        b) All physical aliases that exist in the controller. This is
+           appropriate when the OS is responsible for managing assignment of
+           the physical aliases.
+    - "security": Optional. Security configuration registers.
+    Users of this binding MUST look up entries in the reg property by name,
+    using this reg-names property to do so.
+- reg
+    Array of (physical base address, length) tuples.
+    Must contain one entry per entry in the reg-names property, in a matching
+    order.
+- interrupts
+    Array of interrupt specifiers.
+    The interrupt outputs from the HW block, one per set of ports, in the
+    order the HW manual describes them. The number of entries required varies
+    depending on compatible value:
+    - "nvidia,tegra186-gpio": 6 entries.
+    - "nvidia,tegra186-gpio-aon": 1 entry.
+- gpio-controller
+    Boolean.
+    Marks the device node as a GPIO controller/provider.
+- #gpio-cells
+    Single-cell integer.
+    Must be <2>.
+    Indicates how many cells are used in a consumer's GPIO specifier.
+    In the specifier:
+    - The first cell is the pin number.
+        See <dt-bindings/gpio/tegra186-gpio.h>.
+    - The second cell contains flags:
+        - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+- interrupt-controller
+    Boolean.
+    Marks the device node as an interrupt controller/provider.
+- #interrupt-cells
+    Single-cell integer.
+    Must be <2>.
+    Indicates how many cells are used in a consumer's interrupt specifier.
+    In the specifier:
+    - The first cell is the GPIO number.
+        See <dt-bindings/gpio/tegra186-gpio.h>.
+    - The second cell is contains flags:
+        - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+            Valid combinations are 1, 2, 3, 4, 8.
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+gpio@2200000 {
+	compatible = "nvidia,tegra186-gpio";
+	reg-names = "security", "gpio";
+	reg =
+		<0x0 0x2200000 0x0 0x10000>,
+		<0x0 0x2210000 0x0 0x10000>;
+	interrupts =
+		<0 47 IRQ_TYPE_LEVEL_HIGH>,
+		<0 50 IRQ_TYPE_LEVEL_HIGH>,
+		<0 53 IRQ_TYPE_LEVEL_HIGH>,
+		<0 56 IRQ_TYPE_LEVEL_HIGH>,
+		<0 59 IRQ_TYPE_LEVEL_HIGH>,
+		<0 180 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+gpio@c2f0000 {
+	compatible = "nvidia,tegra186-gpio-aon";
+	reg-names = "security", "gpio";
+	reg =
+		<0x0 0xc2f0000 0x0 0x1000>,
+		<0x0 0xc2f1000 0x0 0x1000>;
+	interrupts =
+		<0 60 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index 23bfe8e1f7cc..ff3db65e50de 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -1,9 +1,10 @@
-NVIDIA GK20A Graphics Processing Unit
+NVIDIA Tegra Graphics Processing Units
 
 Required properties:
-- compatible: "nvidia,<chip>-<gpu>"
+- compatible: "nvidia,<gpu>"
   Currently recognized values:
-  - nvidia,tegra124-gk20a
+  - nvidia,gk20a
+  - nvidia,gm20b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -19,14 +20,20 @@ Required properties:
 - clock-names: Must include the following entries:
   - gpu
   - pwr
+If the compatible string is "nvidia,gm20b", then the following clock
+is also required:
+  - ref
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - gpu
 
-Example:
+Optional properties:
+- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
 
-	gpu@0,57000000 {
+Example for GK20A:
+
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
@@ -39,5 +46,25 @@ Example:
 		clock-names = "gpu", "pwr";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+		status = "disabled";
+	};
+
+Example for GM20B:
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
 		status = "disabled";
 	};
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
index c7a26ca8da12..6611a7c2053a 100644
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -30,11 +30,90 @@ Required properties:
                         region may not be present in some scenarios, such
                         as in the device tree presented to a virtual machine.
 
+    - msi-parent
+        Value type: <phandle>
+        Definition: Must be present and point to the MSI controller node
+                    handling message interrupts for the MC.
+
+    - ranges
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Defines the mapping between the child
+                    MC address space and the parent system address space.
+
+                    The MC address space is defined by 3 components:
+                       <region type> <offset hi> <offset lo>
+
+                    Valid values for region type are
+                       0x0 - MC portals
+                       0x1 - QBMAN portals
+
+    - #address-cells
+        Value type: <u32>
+        Definition: Must be 3.  (see definition in 'ranges' property)
+
+    - #size-cells
+        Value type: <u32>
+        Definition: Must be 1.
+
+Sub-nodes:
+
+        The fsl-mc node may optionally have dpmac sub-nodes that describe
+        the relationship between the Ethernet MACs which belong to the MC
+        and the Ethernet PHYs on the system board.
+
+        The dpmac nodes must be under a node named "dpmacs" which contains
+        the following properties:
+
+            - #address-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 1.
+
+            - #size-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 0.
+
+        These nodes must have the following properties:
+
+            - compatible
+              Value type: <string>
+              Definition: Must be "fsl,qoriq-mc-dpmac".
+
+            - reg
+              Value type: <prop-encoded-array>
+              Definition: Specifies the id of the dpmac.
+
+            - phy-handle
+              Value type: <phandle>
+              Definition: Specifies the phandle to the PHY device node associated
+                          with the this dpmac.
+
 Example:
 
         fsl_mc: fsl-mc@80c000000 {
                 compatible = "fsl,qoriq-mc";
                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-        };
+                msi-parent = <&its>;
+                #address-cells = <3>;
+                #size-cells = <1>;
+
+                /*
+                 * Region type 0x0 - MC portals
+                 * Region type 0x1 - QBMAN portals
+                 */
+                ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+                          0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
 
+                dpmacs {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dpmac@1 {
+                        compatible = "fsl,qoriq-mc-dpmac";
+                        reg = <1>;
+                        phy-handle = <&mdio0_phy0>;
+                    }
+                }
+        };
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index ea5614b6f613..07184e8f894e 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -15,6 +15,7 @@ Required Properties:
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
+	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
 
 Optional Properties:
 * clocks: from common clock binding: if ciu_drive and ciu_sample are
diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
index 0333ec87dc49..c34aa6f8a424 100644
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -5,7 +5,8 @@ Required properties:
 		 "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
 		 "fsl,ls1021a-qspi"
 		 or
-		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi"
+		 "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",
+		 "fsl,ls1043a-qspi" followed by "fsl,ls1021a-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index fa77f874e321..1ad0fe310ff9 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,7 +1,10 @@
 ARM Freescale DSPI controller
 
 Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi"
+- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
+		"fsl,ls2085a-dspi"
+		or
+		"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain SPI controller interrupt
 - clocks: from common clock binding: handle to dspi clock.
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 6a17aa85c4d5..966885c636d0 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -4,6 +4,7 @@ Required properties:
   - compatible: should be one or more of
 
     - "generic-xhci" for generic XHCI device
+    - "marvell,armada3700-xhci" for Armada 37xx SoCs
     - "marvell,armada-375-xhci" for Armada 375 SoCs
     - "marvell,armada-380-xhci" for Armada 38x SoCs
     - "renesas,xhci-r8a7790" for r8a7790 SoC
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d06dd3eba05c..3af48e8cc7d0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -93,6 +93,7 @@ firefly	Firefly
 focaltech	FocalTech Systems Co.,Ltd
 fsl	Freescale Semiconductor
 ge	General Electric Company
+geekbuying	GeekBuying
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 geniatech	Geniatech, Inc.