summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 10:49:42 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 10:49:42 -0700
commit39eda2aba6be642b71f2e0ad623dcb09fd9d79cf (patch)
treecd0c8f547847641af73e38aab2478f3119dee490 /Documentation/devicetree
parent2e515bf096c245ba87f20ab4b4ea20f911afaeda (diff)
parent9f24b0c9ef9b6b1292579c9e2cd7ff07ddc372b7 (diff)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt: "Here's the powerpc batch for this merge window. Some of the highlights are: - A bunch of endian fixes ! We don't have full LE support yet in that release but this contains a lot of fixes all over arch/powerpc to use the proper accessors, call the firmware with the right endian mode, etc... - A few updates to our "powernv" platform (non-virtualized, the one to run KVM on), among other, support for bridging the P8 LPC bus for UARTs, support and some EEH fixes. - Some mpc51xx clock API cleanups in preparation for a clock API overhaul - A pile of cleanups of our old math emulation code, including better support for using it to emulate optional FP instructions on embedded chips that otherwise have a HW FPU. - Some infrastructure in selftest, for powerpc now, but could be generalized, initially used by some tests for our perf instruction counting code. - A pile of fixes for hotplug on pseries (that was seriously bitrotting) - The usual slew of freescale embedded updates, new boards, 64-bit hiberation support, e6500 core PMU support, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc: Correct FSCR bit definitions powerpc/xmon: Fix printing of set of CPUs in xmon powerpc/pseries: Move lparcfg.c to platforms/pseries powerpc/powernv: Return secondary CPUs to firmware on kexec powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32 powerpc: Cleanup handling of the DSCR bit in the FSCR register powerpc/pseries: Child nodes are not detached by dlpar_detach_node powerpc/pseries: Add mising of_node_put in delete_dt_node powerpc/pseries: Make dlpar_configure_connector parent node aware powerpc/pseries: Do all node initialization in dlpar_parse_cc_node powerpc/pseries: Fix parsing of initial node path in update_dt_node powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header powerpc/pseries: Fix over writing of rtas return code in update_dt_node powerpc/pseries: Fix creation of loop in device node property list powerpc: Skip emulating & leave interrupts off for kernel program checks powerpc: Add more exception trampolines for hypervisor exceptions powerpc: Fix location and rename exception trampolines powerpc: Add more trap names to xmon powerpc/pseries: Add a warning in the case of cross-cpu VPA registration powerpc: Update the 00-Index in Documentation/powerpc ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/crypto/fsl-sec6.txt157
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt53
2 files changed, 198 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
new file mode 100644
index 000000000000..c0a20cd972e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+ -SEC 6 Node
+ -Job Ring Node
+ -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+ Node defines the base address of the SEC 6 block.
+ This block specifies the address range of all global
+ configuration registers for the SEC 6 block.
+ For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v6.0".
+
+ - fsl,sec-era
+ Usage: optional
+ Value type: <u32>
+ Definition: A standard property. Define the 'ERA' of the SEC
+ device.
+
+ - #address-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing physical addresses in child nodes.
+
+ - #size-cells
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Defines the number of cells
+ for representing the size of physical addresses in
+ child nodes.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical
+ address and length of the SEC 6 configuration registers.
+
+ - ranges
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address
+ range of the SEC 6.0 register space (-SNVS not included). A
+ triplet that includes the child address, parent address, &
+ length.
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+EXAMPLE
+ crypto@a0000 {
+ compatible = "fsl,sec-v6.0";
+ fsl,sec-era = <6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xa0000 0x20000>;
+ ranges = <0 0xa0000 0x20000>;
+ };
+
+=====================================================================
+Job Ring (JR) Node
+
+ Child of the crypto node defines data processing interface to SEC 6
+ across the peripheral bus for purposes of processing
+ cryptographic descriptors. The specified address
+ range can be made visible to one (or more) cores.
+ The interrupt defined for this node is controlled within
+ the address range of this node.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,sec-v6.0-job-ring".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Specifies a two JR parameters: an offset from
+ the parent physical address and the length the JR registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this
+ device. The value of the interrupts property
+ consists of one interrupt specifier. The format
+ of the specifier is defined by the binding document
+ describing the node's interrupt parent.
+
+EXAMPLE
+ jr@1000 {
+ compatible = "fsl,sec-v6.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <49 2 0 0>;
+ };
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself. A chip using the SEC
+should include the dtsi inside each SEC node. Example:
+
+In qoriq-sec6.0.dtsi:
+
+ compatible = "fsl,sec-v6.0";
+ fsl,sec-era = <6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ jr@1000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ };
+
+ jr@2000 {
+ compatible = "fsl,sec-v6.0-job-ring",
+ "fsl,sec-v5.2-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.4-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ };
+
+In the C293 device tree, we add the include of public property:
+
+ crypto@a0000 {
+ /include/ "qoriq-sec6.0.dtsi"
+ }
+
+ crypto@a0000 {
+ reg = <0xa0000 0x20000>;
+ ranges = <0 0xa0000 0x20000>;
+
+ jr@1000 {
+ interrupts = <49 2 0 0>;
+ };
+
+ jr@2000 {
+ interrupts = <50 2 0 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index 5693877ab377..82dd5b65cf48 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -1,21 +1,20 @@
* Freescale MSI interrupt controller
Required properties:
-- compatible : compatible list, contains 2 entries,
- first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
- etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
- the parent type.
+- compatible : compatible list, may contain one or two entries
+ The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+ "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+ version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+ provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+ should be used. The first entry is optional; the second entry is
+ required.
- reg : It may contain one or two regions. The first region should contain
the address and the length of the shared message interrupt register set.
- The second region should contain the address of aliased MSIIR register for
- platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
- msi interrupt can be used in the 256 msi interrupts. This property is
- optional, without this, all the 256 MSI interrupts can be used.
- Each available range must begin and end on a multiple of 32 (i.e.
- no splitting an individual MSI register or the associated PIC interrupt).
+ The second region should contain the address of aliased MSIIR or MSIIR1
+ register for platforms that have such an alias, if using MSIIR1, the second
+ region must be added because different MSI group has different MSIIR1 offset.
- interrupts : each one of the interrupts here is one entry per 32 MSIs,
and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
to MPIC.
Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts. This property is
+ optional, without this, all the MSI interrupts can be used.
+ Each available range must begin and end on a multiple of 32 (i.e.
+ no splitting an individual MSI register or the associated PIC interrupt).
+ MPIC v4.3 does not support this property because the 32 interrupts of an
+ individual register are not continuous when using MSIIR1.
+
- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
is used for MSI messaging. The address of MSIIR in PCI address space is
the MSI message address.
@@ -54,6 +61,28 @@ Example:
interrupt-parent = <&mpic>;
};
+ msi@41600 {
+ compatible = "fsl,mpic-msi-v4.3";
+ reg = <0x41600 0x200 0x44148 4>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0
+ 0x100 0 0 0
+ 0x101 0 0 0
+ 0x102 0 0 0
+ 0x103 0 0 0
+ 0x104 0 0 0
+ 0x105 0 0 0
+ 0x106 0 0 0
+ 0x107 0 0 0>;
+ };
+
The Freescale hypervisor and msi-address-64
-------------------------------------------
Normally, PCI devices have access to all of CCSR via an ATMU mapping. The