summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-08-01 21:44:08 -0400
committerLinus Torvalds <torvalds@linux-foundation.org>2016-08-01 21:44:08 -0400
commit731c7d3a205ba89b475b2aa71b5f13dd6ae3de56 (patch)
treed2b9c3e0a98b94dfc3e4e60e35622c0143ef4ed4 /Documentation/devicetree
parent77a87824ed676ca8ff8482e4157d3adb284fd381 (diff)
parent753e7c8cbd8c503b962294303c7b5e9ea8513443 (diff)
Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux
Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/display/arm,malidp.txt65
-rw-r--r--Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt26
-rw-r--r--Documentation/devicetree/bindings/display/bridge/analogix_dp.txt1
-rw-r--r--Documentation/devicetree/bindings/display/bridge/sii902x.txt35
-rw-r--r--Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt53
-rw-r--r--Documentation/devicetree/bindings/display/connector/hdmi-connector.txt1
-rw-r--r--Documentation/devicetree/bindings/display/fsl,dcu.txt9
-rw-r--r--Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt148
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt117
-rw-r--r--Documentation/devicetree/bindings/display/msm/mdp.txt59
-rw-r--r--Documentation/devicetree/bindings/display/msm/mdp4.txt112
-rw-r--r--Documentation/devicetree/bindings/display/msm/mdp5.txt160
-rw-r--r--Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/panel-dpi.txt2
-rw-r--r--Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt7
-rw-r--r--Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt7
-rw-r--r--Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt9
-rw-r--r--Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt13
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt60
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
23 files changed, 803 insertions, 110 deletions
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
new file mode 100644
index 000000000000..2f7870983ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -0,0 +1,65 @@
+ARM Mali-DP
+
+The following bindings apply to a family of Display Processors sold as
+licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+DP650 processors that offer multiple composition layers, support for
+rotation and scaling output.
+
+Required properties:
+ - compatible: should be one of
+ "arm,mali-dp500"
+ "arm,mali-dp550"
+ "arm,mali-dp650"
+ depending on the particular implementation present in the hardware
+ - reg: Physical base address and size of the block of registers used by
+ the processor.
+ - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
+ interrupt client nodes.
+ - interrupt-names: name of the engine inside the processor that will
+ use the corresponding interrupt. Should be one of "DE" or "SE".
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+ - clock-names: A list of clock names. It should contain:
+ - "pclk": for the APB interface clock
+ - "aclk": for the AXI interface clock
+ - "mclk": for the main processor clock
+ - "pxlclk": for the pixel clock feeding the output PLL of the processor.
+ - arm,malidp-output-port-lines: Array of u8 values describing the number
+ of output lines per channel (R, G and B).
+
+Required sub-nodes:
+ - port: The Mali DP connection to an encoder input port. The connection
+ is modelled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+ - memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+ to be used for the framebuffer; if not present, the framebuffer may
+ be located anywhere in memory.
+
+
+Example:
+
+/ {
+ ...
+
+ dp0: malidp@6f200000 {
+ compatible = "arm,mali-dp650";
+ reg = <0 0x6f200000 0 0x20000>;
+ memory-region = <&display_reserved>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "DE", "SE";
+ clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ port {
+ dp0_output: endpoint {
+ remote-endpoint = <&tda998x_2_input>;
+ };
+ };
+ };
+
+ ...
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 96c25ee01501..6532a59c9b43 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,13 +1,19 @@
-Analog Device ADV7511(W)/13 HDMI Encoders
+Analog Device ADV7511(W)/13/33 HDMI Encoders
-----------------------------------------
-The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP.
+S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
+the others support RGB interface.
Required properties:
-- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
+- compatible: Should be one of:
+ "adi,adv7511"
+ "adi,adv7511w"
+ "adi,adv7513"
+ "adi,adv7533"
+
- reg: I2C slave address
The ADV7511 supports a large number of input data formats that differ by their
@@ -32,6 +38,11 @@ The following input format properties are required except in "rgb 1x" and
- adi,input-justification: The input bit justification ("left", "evenly",
"right").
+The following properties are required for ADV7533:
+
+- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
+ be one of 1, 2, 3 or 4.
+
Optional properties:
- interrupts: Specifier for the ADV7511 interrupt
@@ -42,13 +53,18 @@ Optional properties:
- adi,embedded-sync: The input uses synchronization signals embedded in the
data stream (similar to BT.656). Defaults to separate H/V synchronization
signals.
+- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
+ generator. The chip will rely on the sync signals in the DSI data lanes,
+ rather than generate its own timings for HDMI output.
Required nodes:
The ADV7511 has two video ports. Their connections are modelled using the OF
graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-- Video port 0 for the RGB or YUV input
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+ remote endpoint phandle should be a reference to a valid mipi_dsi_host device
+ node.
- Video port 1 for the HDMI output
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4f2ba8c13d92..4a0f4f7682ad 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -5,6 +5,7 @@ Required properties for dp-controller:
platform specific such as:
* "samsung,exynos5-dp"
* "rockchip,rk3288-dp"
+ * "rockchip,rk3399-edp"
-reg:
physical base address of the controller and length
of memory mapped region.
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
new file mode 100644
index 000000000000..56a3e68ccb80
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -0,0 +1,35 @@
+sii902x HDMI bridge bindings
+
+Required properties:
+ - compatible: "sil,sii9022"
+ - reg: i2c address of the bridge
+
+Optional properties:
+ - interrupts-extended or interrupt-parent + interrupts: describe
+ the interrupt line used to inform the host about hotplug events.
+ - reset-gpios: OF device-tree gpio specification for RST_N pin.
+
+Optional subnodes:
+ - video input: this subnode can contain a video input port node
+ to connect the bridge to a display controller output (See this
+ documentation [1]).
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ hdmi-bridge@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ reset-gpios = <&pioA 1 0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dc_out>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
new file mode 100644
index 000000000000..e3f6aa6a214d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
@@ -0,0 +1,53 @@
+Toshiba TC358767 eDP bridge bindings
+
+Required properties:
+ - compatible: "toshiba,tc358767"
+ - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+ - clock-names: should be "ref"
+ - clocks: OF device-tree clock specification for refclk input. The reference
+ clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+Optional properties:
+ - shutdown-gpios: OF device-tree gpio specification for SD pin
+ (active high shutdown input)
+ - reset-gpios: OF device-tree gpio specification for RSTX pin
+ (active low system reset)
+ - ports: the ports node can contain video interface port nodes to connect
+ to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
+ - port@0: DSI input port
+ - port@1: DPI input port
+ - port@2: eDP/DP output port
+
+[1]: Documentation/devicetree/bindings/graph.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ edp-bridge@68 {
+ compatible = "toshiba,tc358767";
+ reg = <0x68>;
+ shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ clock-names = "ref";
+ clocks = <&edp_refclk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
index acd5668b1ce1..508aee461e0d 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
@@ -8,6 +8,7 @@ Required properties:
Optional properties:
- label: a symbolic name for the connector
- hpd-gpios: HPD GPIO number
+- ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
Required nodes:
- Video port for HDMI input
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
index ae55cde1b69e..63ec2a624aa9 100644
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -12,7 +12,7 @@ Required properties:
- clock-names: Should be "dcu" and "pix"
See ../clocks/clock-bindings.txt for details.
- big-endian Boolean property, LS1021A DCU registers are big-endian.
-- fsl,panel: The phandle to panel node.
+- port Video port for the panel output
Optional properties:
- fsl,tcon: The phandle to the timing controller node.
@@ -24,6 +24,11 @@ dcu: dcu@2ce0000 {
clocks = <&platform_clk 0>, <&platform_clk 0>;
clock-names = "dcu", "pix";
big-endian;
- fsl,panel = <&panel>;
fsl,tcon = <&tcon>;
+
+ port {
+ dcu_out: endpoint {
+ remote-endpoint = <&panel_out>;
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
new file mode 100644
index 000000000000..7b124242b0c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -0,0 +1,148 @@
+Mediatek HDMI Encoder
+=====================
+
+The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
+its parallel input.
+
+Required properties:
+- compatible: Should be "mediatek,<chip>-hdmi".
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "pixel", "pll", "bclk", and "spdif".
+- phys: phandle link to the HDMI PHY node.
+ See Documentation/devicetree/bindings/phy/phy-bindings.txt for details.
+- phy-names: must contain "hdmi"
+- mediatek,syscon-hdmi: phandle link and register offset to the system
+ configuration registers. For mt8173 this must be offset 0x900 into the
+ MMSYS_CONFIG region: <&mmsys 0x900>.
+- ports: A node containing input and output port nodes with endpoint
+ definitions as documented in Documentation/devicetree/bindings/graph.txt.
+- port@0: The input port in the ports node should be connected to a DPI output
+ port.
+- port@1: The output port in the ports node should be connected to the input
+ port of a connector node that contains a ddc-i2c-bus property, or to the
+ input port of an attached bridge chip, such as a SlimPort transmitter.
+
+HDMI CEC
+========
+
+The HDMI CEC controller handles hotplug detection and CEC communication.
+
+Required properties:
+- compatible: Should be "mediatek,<chip>-cec"
+- reg: Physical base address and length of the controller's registers
+- interrupts: The interrupt signal from the function block.
+- clocks: device clock
+
+HDMI DDC
+========
+
+The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+- compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- reg: Physical base address and length of the controller's registers
+- clocks: device clock
+- clock-names: Should be "ddc-i2c".
+
+HDMI PHY
+========
+
+The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
+output and drives the HDMI pads.
+
+Required properties:
+- compatible: "mediatek,<chip>-hdmi-phy"
+- reg: Physical base address and length of the module's registers
+- clocks: PLL reference clock
+- clock-names: must contain "pll_ref"
+- clock-output-names: must be "hdmitx_dig_cts" on mt8173
+- #phy-cells: must be <0>
+- #clock-cells: must be <0>
+
+Optional properties:
+- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa
+- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c
+
+Example:
+
+cec: cec@10013000 {
+ compatible = "mediatek,mt8173-cec";
+ reg = <0 0x10013000 0 0xbc>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+};
+
+hdmi_phy: hdmi-phy@10209100 {
+ compatible = "mediatek,mt8173-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+};
+
+hdmi_ddc0: i2c@11012000 {
+ compatible = "mediatek,mt8173-hdmi-ddc";
+ reg = <0 0x11012000 0 0x1c>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_I2C5>;
+ clock-names = "ddc-i2c";
+};
+
+hdmi0: hdmi@14025000 {
+ compatible = "mediatek,mt8173-hdmi";
+ reg = <0 0x14025000 0 0x400>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLLCK>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pin>;
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+ assigned-clock-parents = <&hdmi_phy>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+};
+
+connector {
+ compatible = "hdmi-connector";
+ type = "a";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f5948c48b9a2..6b1cab17f52d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -11,8 +11,7 @@ Required properties:
be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clocks: Phandles to device clocks.
- clock-names: the following clocks are required:
* "mdp_core_clk"
* "iface_clk"
@@ -23,16 +22,21 @@ Required properties:
* "core_clk"
For DSIv2, we need an additional clock:
* "src_clk"
+- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform.
+- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
+ by a DSI PHY block. See [1] for details on clock bindings.
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
-- qcom,dsi-phy: phandle to DSI PHY device node
+- phys: phandle to DSI PHY device node
+- phy-names: the name of the corresponding PHY device
- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
+- ports: Contains 2 DSI controller ports as child nodes. Each port contains
+ an endpoint subnode as defined in [2] and [3].
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
- See files in Documentation/devicetree/bindings/display/panel/ for each supported
- panel.
+ See files in [4] for each supported panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
@@ -44,34 +48,38 @@ Optional properties:
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
-- port: DSI controller output port, containing one endpoint subnode.
+- ports: contains DSI controller input and output ports as children, each
+ containing one endpoint subnode.
DSI Endpoint properties:
- - remote-endpoint: set to phandle of the connected panel's endpoint.
- See Documentation/devicetree/bindings/graph.txt for device graph info.
- - qcom,data-lane-map: this describes how the logical DSI lanes are mapped
- to the physical lanes on the given platform. The value contained in
- index n describes what logical data lane is mapped to the physical data
- lane n (DATAn, where n lies between 0 and 3).
+ - remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
+ input endpoint. For port@1, set to the MDP interface output. See [2] for
+ device graph info.
+
+ - data-lanes: this describes how the physical DSI data lanes are mapped
+ to the logical lanes on the given platform. The value contained in
+ index n describes what physical lane is mapped to the logical lane n
+ (DATAn, where n lies between 0 and 3). The clock lane position is fixed
+ and can't be changed. Hence, they aren't a part of the DT bindings. See
+ [3] for more info on the data-lanes property.
For example:
- qcom,data-lane-map = <3 0 1 2>;
+ data-lanes = <3 0 1 2>;
- The above mapping describes that the logical data lane DATA3 is mapped to
- the physical data lane DATA0, logical DATA0 to physical DATA1, logic DATA1
- to phys DATA2 and logic DATA2 to phys DATA3.
+ The above mapping describes that the logical data lane DATA0 is mapped to
+ the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
+ to phys DATA1 and logic DATA3 to phys DATA2.
There are only a limited number of physical to logical mappings possible:
-
- "0123": Logic 0->Phys 0; Logic 1->Phys 1; Logic 2->Phys 2; Logic 3->Phys 3;
- "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3;
- "2301": Logic 2->Phys 0; Logic 3->Phys 1; Logic 0->Phys 2; Logic 1->Phys 3;
- "1230": Logic 1->Phys 0; Logic 2->Phys 1; Logic 3->Phys 2; Logic 0->Phys 3;
- "0321": Logic 0->Phys 0; Logic 3->Phys 1; Logic 2->Phys 2; Logic 1->Phys 3;
- "1032": Logic 1->Phys 0; Logic 0->Phys 1; Logic 3->Phys 2; Logic 2->Phys 3;
- "2103": Logic 2->Phys 0; Logic 1->Phys 1; Logic 0->Phys 2; Logic 3->Phys 3;
- "3210": Logic 3->Phys 0; Logic 2->Phys 1; Logic 1->Phys 2; Logic 0->Phys 3;
+ <0 1 2 3>
+ <1 2 3 0>
+ <2 3 0 1>
+ <3 0 1 2>
+ <0 3 2 1>
+ <1 0 3 2>
+ <2 1 0 3>
+ <3 2 1 0>
DSI PHY:
Required properties:
@@ -86,11 +94,12 @@ Required properties:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
+- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
+ 2 clocks: A byte clock (index 0), and a pixel clock (index 1).
- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface_clk"
- vddio-supply: phandle to vdd-io regulator device node
@@ -99,11 +108,16 @@ Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
+[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[2] Documentation/devicetree/bindings/graph.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/display/panel/
+
Example:
- mdss_dsi0: qcom,mdss_dsi@fd922800 {
+ dsi0: dsi@fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
qcom,dsi-host-index = <0>;
- interrupt-parent = <&mdss_mdp>;
+ interrupt-parent = <&mdp>;
interrupts = <4 0>;
reg-names = "dsi_ctrl";
reg = <0xfd922800 0x200>;
@@ -124,19 +138,48 @@ Example:
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_PCLK0_CLK>;
+
+ assigned-clocks =
+ <&mmcc BYTE0_CLK_SRC>,
+ <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents =
+ <&dsi_phy0 0>,
+ <&dsi_phy0 1>;
+
vdda-supply = <&pma8084_l2>;
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
- qcom,dsi-phy = <&mdss_dsi_phy0>;
+ phys = <&dsi_phy0>;
+ phy-names ="dsi-phy";
qcom,dual-dsi-mode;
qcom,master-dsi;
qcom,sync-dual-dsi;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mdss_dsi_active>;
- pinctrl-1 = <&mdss_dsi_suspend>;
+ pinctrl-0 = <&dsi_active>;
+ pinctrl-1 = <&dsi_suspend>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
@@ -152,16 +195,9 @@ Example:
};
};
};
-
- port {
- dsi0_out: endpoint {
- remote-endpoint = <&panel_in>;
- lanes = <0 1 2 3>;
- };
- };
};
- mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 {
+ dsi_phy0: dsi-phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
qcom,dsi-phy-index = <0>;
reg-names =
@@ -173,6 +209,7 @@ Example:
<0xfd922d80 0x7b>;
clock-names = "iface_clk";
clocks = <&mmcc MDSS_AHB_CLK>;
+ #clock-cells = <1>;
vddio-supply = <&pma8084_l12>;
qcom,dsi-phy-regulator-ldo-mode;
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
deleted file mode 100644
index a214f6cd0363..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Qualcomm adreno/snapdragon display controller
-
-Required properties:
-- compatible:
- * "qcom,mdp4" - mdp4
- * "qcom,mdp5" - mdp5
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- connectors: array of phandles for output device(s)
-- clocks: device clocks
- See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
- For MDP4:
- * "core_clk"
- * "iface_clk"
- * "lut_clk"
- * "src_clk"
- * "hdmi_clk"
- * "mdp_clk"
- For MDP5:
- * "bus_clk"
- * "iface_clk"
- * "core_clk_src"
- * "core_clk"
- * "lut_clk" (some MDP5 versions may not need this)
- * "vsync_clk"
-
-Optional properties:
-- gpus: phandle for gpu device
-- clock-names: the following clocks are optional:
- * "lut_clk"
-
-Example:
-
-/ {
- ...
-
- mdp: qcom,mdp@5100000 {
- compatible = "qcom,mdp4";
- reg = <0x05100000 0xf0000>;
- interrupts = <GIC_SPI 75 0>;
- connectors = <&hdmi>;
- gpus = <&gpu>;
- clock-names =
- "core_clk",
- "iface_clk",
- "lut_clk",
- "src_clk",
- "hdmi_clk",
- "mdp_clk";
- clocks =
- <&mmcc MDP_SRC>,
- <&mmcc MDP_AHB_CLK>,
- <&mmcc MDP_LUT_CLK>,
- <&mmcc TV_SRC>,
- <&mmcc HDMI_TV_CLK>,
- <&mmcc MDP_TV_CLK>;
- };
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
new file mode 100644
index 000000000000..3c341a15ccdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.txt
@@ -0,0 +1,112 @@
+Qualcomm adreno/snapdragon MDP4 display controller
+
+Description:
+
+This is the bindings documentation for the MDP4 display controller found in
+SoCs like MSM8960, APQ8064 and MSM8660.
+
+Required properties:
+- compatible:
+ * "qcom,mdp4" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- clocks: device clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+ * "core_clk"
+ * "iface_clk"
+ * "bus_clk"
+ * "lut_clk"
+ * "hdmi_clk"
+ * "tv_clk"
+- ports: contains the list of output ports from MDP. These connect to interfaces
+ that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
+ special case since it is a part of the MDP block itself).
+
+ Each output port contains an endpoint that describes how it is connected to an
+ external interface. These are described by the standard properties documented
+ here:
+ Documentation/devicetree/bindings/graph.txt
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ The output port mappings are:
+ Port 0 -> LCDC/LVDS
+ Port 1 -> DSI1 Cmd/Video
+ Port 2 -> DSI2 Cmd/Video
+ Port 3 -> DTV
+
+Optional properties:
+- clock-names: the following clocks are optional:
+ * "lut_clk"
+
+Example:
+
+/ {
+ ...
+
+ hdmi: hdmi@4a00000 {
+ ...
+ ports {
+ ...
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp_dtv_out>;
+ };
+ };
+ ...
+ };
+ ...
+ };
+
+ ...
+
+ mdp: mdp@5100000 {
+ compatible = "qcom,mdp4";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <GIC_SPI 75 0>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "lut_clk",
+ "hdmi_clk",
+ "tv_clk";
+ clocks =
+ <&mmcc MDP_CLK>,
+ <&mmcc MDP_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>,
+ <&mmcc MDP_LUT_CLK>,
+ <&mmcc HDMI_TV_CLK>,
+ <&mmcc MDP_TV_CLK>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp_lvds_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdp_dsi1_out: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ mdp_dsi2_out: endpoint {
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ mdp_dtv_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
new file mode 100644
index 000000000000..30c11ea83754
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -0,0 +1,160 @@
+Qualcomm adreno/snapdragon MDP5 display controller
+
+Description:
+
+This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
+encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
+controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
+
+MDSS:
+Required properties:
+- compatible:
+ * "qcom,mdss" - MDSS
+- reg: Physical base address and length of the controller's registers.
+- reg-names: The names of register regions. The following regions are required:
+ * "mdss_phys"
+ * "vbif_phys"
+- interrupts: The interrupt signal from MDSS.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- power-domains: a power domain consumer specifier according to
+ Documentation/devicetree/bindings/power/power_domain.txt
+- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+ * "iface_clk"
+ * "bus_clk"
+ * "vsync_clk"
+- #address-cells: number of address cells for the MDSS children. Should be 1.
+- #size-cells: Should be 1.
+- ranges: parent bus address space is the same as the child bus address space.
+
+Optional properties:
+- clock-names: the following clocks are optional:
+ * "lut_clk"
+
+MDP5:
+Required properties:
+- compatible:
+ * "qcom,mdp5" - MDP5
+- reg: Physical base address and length of the controller's registers.
+- reg-names: The names of register regions. The following regions are required:
+ * "mdp_phys"
+- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
+- interrupt-parent: phandle to the MDSS block
+ through MDP block
+- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+- * "bus_clk"
+- * "iface_clk"
+- * "core_clk"
+- * "vsync_clk"
+- ports: contains the list of output ports from MDP. These connect to interfaces
+ that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
+ special case since it is a part of the MDP block itself).
+
+ Each output port contains an endpoint that describes how it is connected to an
+ external interface. These are described by the standard properties documented
+ here:
+ Documentation/devicetree/bindings/graph.txt
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ The availability of output ports can vary across SoC revisions:
+
+ For MSM8974 and APQ8084:
+ Port 0 -> MDP_INTF0 (eDP)
+ Port 1 -> MDP_INTF1 (DSI1)
+ Port 2 -> MDP_INTF2 (DSI2)
+ Port 3 -> MDP_INTF3 (HDMI)
+
+ For MSM8916:
+ Port 0 -> MDP_INTF1 (DSI1)
+
+ For MSM8994 and MSM8996:
+ Port 0 -> MDP_INTF1 (DSI1)
+ Port 1 -> MDP_INTF2 (DSI2)
+ Port 2 -> MDP_INTF3 (HDMI)
+
+Optional properties:
+- clock-names: the following clocks are optional:
+ * "lut_clk"
+
+Example:
+
+/ {
+ ...
+
+ mdss: mdss@1a00000 {
+ compatible = "qcom,mdss";
+ reg = <0x1a00000 0x1000>,
+ <0x1ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface_clk",
+ "bus_clk",
+ "vsync_clk"
+
+ interrupts = <0 72 0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface_clk",
+ "bus_clk",
+ "core_clk",
+ "vsync_clk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi@1a98000 {
+ ...
+ ports {
+ ...
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+ ...
+ };
+ ...
+ };
+
+ dsi_phy0: dsi-phy@1a98300 {
+ ...
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt b/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt
new file mode 100644
index 000000000000..b9877acad012
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lp079qx1-sp0v.txt
@@ -0,0 +1,7 @@
+LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lp079qx1-sp0v"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt
new file mode 100644
index 000000000000..42141516f078
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lp097qx1-spa1.txt
@@ -0,0 +1,7 @@
+LG 9.7" (2048x1536 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lp097qx1-spa1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
index 216c894d4f99..b52ac52757df 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
@@ -7,6 +7,8 @@ Required properties:
Optional properties:
- label: a symbolic name for the panel
- enable-gpios: panel enable gpio
+- reset-gpios: GPIO to control the RESET pin
+- vcc-supply: phandle of regulator that will be used to enable power to the display
Required nodes:
- "panel-timing" containing video timings
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt b/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt
new file mode 100644
index 000000000000..dba298b43b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lsn122dl01-c01.txt
@@ -0,0 +1,7 @@
+Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "samsung,lsn122dl01-c01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt
new file mode 100644
index 000000000000..4aff25b8dfe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101k1ly04.txt
@@ -0,0 +1,7 @@
+Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq101k1ly04"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
new file mode 100644
index 000000000000..bcb0e8a29f71
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
@@ -0,0 +1,7 @@
+Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq123p1jx31"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt b/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt
new file mode 100644
index 000000000000..1e87fe6078af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/starry,kr122ea0sra.txt
@@ -0,0 +1,7 @@
+Starry 12.2" (1920x1200 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "starry,kr122ea0sra"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index e832ff98fd61..01cced1c2a18 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -2,7 +2,8 @@ Rockchip RK3288 specific extensions to the Analogix Display Port
================================
Required properties:
-- compatible: "rockchip,rk3288-edp";
+- compatible: "rockchip,rk3288-dp",
+ "rockchip,rk3399-edp";
- reg: physical base address of the controller and length
@@ -27,6 +28,12 @@ Required properties:
Port 0: contained 2 endpoints, connecting to the output of vop.
Port 1: contained 1 endpoint, connecting to the input of panel.
+Optional property for different chips:
+- clocks: from common clock binding: handle to grf_vio clock.
+
+- clock-names: from common clock binding:
+ Required elements: "grf"
+
For the below properties, please refer to Analogix DP binding document:
* Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
- phys (required)
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index a3bd8c050c4e..0fad7ed2ea19 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -208,6 +208,7 @@ of the following host1x client modules:
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- sor: clock input for the SOR hardware
+ - source: source clock for the SOR clock
- parent: input for the pixel clock
- dp: reference clock for the SOR clock
- safe: safe reference for the SOR clock during power up
@@ -226,9 +227,9 @@ of the following host1x client modules:
- nvidia,dpaux: phandle to a DispayPort AUX interface
- dpaux: DisplayPort AUX interface
- - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux". Otherwise,
- must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
- <chip> is tegra132.
+ - compatible : Should contain one of the following:
+ - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
+ - "nvidia,tegra210-dpaux": for Tegra210
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
@@ -241,6 +242,12 @@ of the following host1x client modules:
- reset-names: Must include the following entries:
- dpaux
- vdd-supply: phandle of a supply that powers the DisplayPort link
+ - i2c-bus: Subnode where I2C slave devices are listed. This subnode
+ must be always present. If there are no I2C slave devices, an empty
+ node should be added. See ../../i2c/i2c.txt for more information.
+
+ See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
+ regarding the DPAUX pad controller bindings.
Example:
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
new file mode 100644
index 000000000000..f2abdaee9022
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
@@ -0,0 +1,60 @@
+Device tree binding for NVIDIA Tegra DPAUX pad controller
+========================================================
+
+The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
+which can be assigned to either the DPAUX channel or to an I2C
+controller.
+
+This document defines the device-specific binding for the DPAUX pad
+controller. Refer to pinctrl-bindings.txt in this directory for generic
+information about pin controller device tree bindings. Please refer to
+the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
+details on the DPAUX binding.
+
+Pin muxing:
+-----------
+
+Child nodes contain the pinmux configurations following the conventions
+from the pinctrl-bindings.txt document.
+
+Since only three configurations are possible, only three child nodes are
+needed to describe the pin mux'ing options for the DPAUX pads.
+Furthermore, given that the pad functions are only applicable to a
+single set of pads, the child nodes only need to describe the pad group
+the functions are being applied to rather than the individual pads.
+
+Required properties:
+- groups: Must be "dpaux-io"
+- function: Must be either "aux", "i2c" or "off".
+
+Example:
+--------
+
+ dpaux@545c0000 {
+ ...
+
+ state_dpaux_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+ };
+
+ ...
+
+ i2c@7000d100 {
+ ...
+ pinctrl-0 = <&state_dpaux_i2c>;
+ pinctrl-1 = <&state_dpaux_off>;
+ pinctrl-names = "default", "idle";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b9361816fc32..68391a462c0a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -249,6 +249,7 @@ sony Sony Corporation
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
st STMicroelectronics
+starry Starry Electronic Technology (ShenZhen) Co., LTD
startek Startek
ste ST-Ericsson
stericsson ST-Ericsson