summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-05 15:29:04 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-05 15:29:04 -0700
commitf83ccb93585d1f472c30fa2bbb8b56c23dbdb506 (patch)
tree6548d92ff3f362f590bc96129df3e5cb5170ac02 /Documentation/devicetree
parent930b440cd8256f3861bdb0a59d26efaadac7941a (diff)
parent50b4af414d414af9e4df6f64e613bb0ffe581055 (diff)
Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/bcm21664.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/keystone/keystone.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/omap/dmm.txt22
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/pmu.txt15
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4-clock.txt259
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5250-clock.txt163
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5420-clock.txt184
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5440-clock.txt45
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/at91_adc.txt (renamed from Documentation/devicetree/bindings/arm/atmel-adc.txt)33
-rw-r--r--Documentation/devicetree/bindings/net/socfpga-dwmac.txt27
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt6
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt8
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-powerdown.txt47
-rw-r--r--Documentation/devicetree/bindings/reset/st,sti-softreset.txt46
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt4
-rw-r--r--Documentation/devicetree/bindings/usb/ehci-omap.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/ohci-omap3.txt2
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt7
21 files changed, 269 insertions, 647 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm21664.txt b/Documentation/devicetree/bindings/arm/bcm/bcm21664.txt
new file mode 100644
index 000000000000..e0774255e1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm21664.txt
@@ -0,0 +1,15 @@
+Broadcom BCM21664 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM21664
+SoC.
+
+Required root node property:
+ - compatible: brcm,bcm21664
+
+Example:
+ / {
+ model = "BCM21664 SoC";
+ compatible = "brcm,bcm21664";
+ [...]
+ }
diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt b/Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt
new file mode 100644
index 000000000000..93f31ca1ef4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/kona-resetmgr.txt
@@ -0,0 +1,14 @@
+Broadcom Kona Family Reset Manager
+----------------------------------
+
+The reset manager is used on the Broadcom BCM21664 SoC.
+
+Required properties:
+ - compatible: brcm,bcm21664-resetmgr
+ - reg: memory address & range
+
+Example:
+ brcm,resetmgr@35001f00 {
+ compatible = "brcm,bcm21664-resetmgr";
+ reg = <0x35001f00 0x24>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
index 63c0e6ae5cf7..59d7a46f85eb 100644
--- a/Documentation/devicetree/bindings/arm/keystone/keystone.txt
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -8,3 +8,13 @@ Required properties:
- compatible: All TI specific devices present in Keystone SOC should be in
the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
type UART should use the specified compatible for those devices.
+
+Boards:
+- Keystone 2 Hawking/Kepler EVM
+ compatible = "ti,k2hk-evm","ti,keystone"
+
+- Keystone 2 Lamarr EVM
+ compatible = "ti,k2l-evm","ti,keystone"
+
+- Keystone 2 Edison EVM
+ compatible = "ti,k2e-evm","ti,keystone"
diff --git a/Documentation/devicetree/bindings/arm/omap/dmm.txt b/Documentation/devicetree/bindings/arm/omap/dmm.txt
new file mode 100644
index 000000000000..8bd6d0a238a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dmm.txt
@@ -0,0 +1,22 @@
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible: Should contain "ti,omap4-dmm" for OMAP4 family
+ Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg: Contains DMM register address range (base address and length)
+- interrupts: Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods: Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+ compatible = "ti,omap4-dmm";
+ reg = <0x4e000000 0x800>;
+ ti,hwmods = "dmm";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index af9b4a0d902b..36ede19a1630 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -99,6 +99,9 @@ Boards:
- OMAP4 PandaBoard : Low cost community board
compatible = "ti,omap4-panda", "ti,omap4430"
+- OMAP4 DuoVero with Parlor : Commercial expansion board with daughter board
+ compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
compatible = "ti,omap3-evm", "ti,omap3"
@@ -114,5 +117,8 @@ Boards:
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+- AM437x GP EVM
+ compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+
- DRA7 EVM: Software Developement Board for DRA7XX
compatible = "ti,dra7-evm", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
new file mode 100644
index 000000000000..f1f155255f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -0,0 +1,15 @@
+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - compatible : should contain two values. First value must be one from following list:
+ - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+};
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
index a2ac2d9ac71a..f5a5b19ed3b2 100644
--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -15,259 +15,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
-
-
- [Core Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- xxti 1
- xusbxti 2
- fin_pll 3
- fout_apll 4
- fout_mpll 5
- fout_epll 6
- fout_vpll 7
- sclk_apll 8
- sclk_mpll 9
- sclk_epll 10
- sclk_vpll 11
- arm_clk 12
- aclk200 13
- aclk100 14
- aclk160 15
- aclk133 16
- mout_mpll_user_t 17 Exynos4x12
- mout_mpll_user_c 18 Exynos4x12
- mout_core 19
- mout_apll 20
-
-
- [Clock Gate for Special Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- sclk_fimc0 128
- sclk_fimc1 129
- sclk_fimc2 130
- sclk_fimc3 131
- sclk_cam0 132
- sclk_cam1 133
- sclk_csis0 134
- sclk_csis1 135
- sclk_hdmi 136
- sclk_mixer 137
- sclk_dac 138
- sclk_pixel 139
- sclk_fimd0 140
- sclk_mdnie0 141 Exynos4412
- sclk_mdnie_pwm0 12 142 Exynos4412
- sclk_mipi0 143
- sclk_audio0 144
- sclk_mmc0 145
- sclk_mmc1 146
- sclk_mmc2 147
- sclk_mmc3 148
- sclk_mmc4 149
- sclk_sata 150 Exynos4210
- sclk_uart0 151
- sclk_uart1 152
- sclk_uart2 153
- sclk_uart3 154
- sclk_uart4 155
- sclk_audio1 156
- sclk_audio2 157
- sclk_spdif 158
- sclk_spi0 159
- sclk_spi1 160
- sclk_spi2 161
- sclk_slimbus 162
- sclk_fimd1 163 Exynos4210
- sclk_mipi1 164 Exynos4210
- sclk_pcm1 165
- sclk_pcm2 166
- sclk_i2s1 167
- sclk_i2s2 168
- sclk_mipihsi 169 Exynos4412
- sclk_mfc 170
- sclk_pcm0 171
- sclk_g3d 172
- sclk_pwm_isp 173 Exynos4x12
- sclk_spi0_isp 174 Exynos4x12
- sclk_spi1_isp 175 Exynos4x12
- sclk_uart_isp 176 Exynos4x12
- sclk_fimg2d 177
-
- [Peripheral Clock Gates]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- fimc0 256
- fimc1 257
- fimc2 258
- fimc3 259
- csis0 260
- csis1 261
- jpeg 262
- smmu_fimc0 263
- smmu_fimc1 264
- smmu_fimc2 265
- smmu_fimc3 266
- smmu_jpeg 267
- vp 268
- mixer 269
- tvenc 270 Exynos4210
- hdmi 271
- smmu_tv 272
- mfc 273
- smmu_mfcl 274
- smmu_mfcr 275
- g3d 276
- g2d 277
- rotator 278 Exynos4210
- mdma 279 Exynos4210
- smmu_g2d 280 Exynos4210
- smmu_rotator 281 Exynos4210
- smmu_mdma 282 Exynos4210
- fimd0 283
- mie0 284
- mdnie0 285 Exynos4412
- dsim0 286
- smmu_fimd0 287
- fimd1 288 Exynos4210
- mie1 289 Exynos4210
- dsim1 290 Exynos4210
- smmu_fimd1 291 Exynos4210
- pdma0 292
- pdma1 293
- pcie_phy 294
- sata_phy 295 Exynos4210
- tsi 296
- sdmmc0 297
- sdmmc1 298
- sdmmc2 299
- sdmmc3 300
- sdmmc4 301
- sata 302 Exynos4210
- sromc 303
- usb_host 304
- usb_device 305
- pcie 306
- onenand 307
- nfcon 308
- smmu_pcie 309
- gps 310
- smmu_gps 311
- uart0 312
- uart1 313
- uart2 314
- uart3 315
- uart4 316
- i2c0 317
- i2c1 318
- i2c2 319
- i2c3 320
- i2c4 321
- i2c5 322
- i2c6 323
- i2c7 324
- i2c_hdmi 325
- tsadc 326
- spi0 327
- spi1 328
- spi2 329
- i2s1 330
- i2s2 331
- pcm0 332
- i2s0 333
- pcm1 334
- pcm2 335
- pwm 336
- slimbus 337
- spdif 338
- ac97 339
- modemif 340
- chipid 341
- sysreg 342
- hdmi_cec 343
- mct 344
- wdt 345
- rtc 346
- keyif 347
- audss 348
- mipi_hsi 349 Exynos4210
- mdma2 350 Exynos4210
- pixelasyncm0 351
- pixelasyncm1 352
- fimc_lite0 353 Exynos4x12
- fimc_lite1 354 Exynos4x12
- ppmuispx 355 Exynos4x12
- ppmuispmx 356 Exynos4x12
- fimc_isp 357 Exynos4x12
- fimc_drc 358 Exynos4x12
- fimc_fd 359 Exynos4x12
- mcuisp 360 Exynos4x12
- gicisp 361 Exynos4x12
- smmu_isp 362 Exynos4x12
- smmu_drc 363 Exynos4x12
- smmu_fd 364 Exynos4x12
- smmu_lite0 365 Exynos4x12
- smmu_lite1 366 Exynos4x12
- mcuctl_isp 367 Exynos4x12
- mpwm_isp 368 Exynos4x12
- i2c0_isp 369 Exynos4x12
- i2c1_isp 370 Exynos4x12
- mtcadc_isp 371 Exynos4x12
- pwm_isp 372 Exynos4x12
- wdt_isp 373 Exynos4x12
- uart_isp 374 Exynos4x12
- asyncaxim 375 Exynos4x12
- smmu_ispcx 376 Exynos4x12
- spi0_isp 377 Exynos4x12
- spi1_isp 378 Exynos4x12
- pwm_isp_sclk 379 Exynos4x12
- spi0_isp_sclk 380 Exynos4x12
- spi1_isp_sclk 381 Exynos4x12
- uart_isp_sclk 382 Exynos4x12
- tmu_apbif 383
-
- [Mux Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- mout_fimc0 384
- mout_fimc1 385
- mout_fimc2 386
- mout_fimc3 387
- mout_cam0 388
- mout_cam1 389
- mout_csis0 390
- mout_csis1 391
- mout_g3d0 392
- mout_g3d1 393
- mout_g3d 394
- aclk400_mcuisp 395 Exynos4x12
-
- [Div Clocks]
-
- Clock ID SoC (if specific)
- -----------------------------------------------
-
- div_isp0 450 Exynos4x12
- div_isp1 451 Exynos4x12
- div_mcuisp0 452 Exynos4x12
- div_mcuisp1 453 Exynos4x12
- div_aclk200 454 Exynos4x12
- div_aclk400_mcuisp 455 Exynos4x12
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -285,6 +38,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
index 72ce617dea82..536eacd1063f 100644
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -13,163 +13,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
-
- sclk_cam_bayer 128
- sclk_cam0 129
- sclk_cam1 130
- sclk_gscl_wa 131
- sclk_gscl_wb 132
- sclk_fimd1 133
- sclk_mipi1 134
- sclk_dp 135
- sclk_hdmi 136
- sclk_pixel 137
- sclk_audio0 138
- sclk_mmc0 139
- sclk_mmc1 140
- sclk_mmc2 141
- sclk_mmc3 142
- sclk_sata 143
- sclk_usb3 144
- sclk_jpeg 145
- sclk_uart0 146
- sclk_uart1 147
- sclk_uart2 148
- sclk_uart3 149
- sclk_pwm 150
- sclk_audio1 151
- sclk_audio2 152
- sclk_spdif 153
- sclk_spi0 154
- sclk_spi1 155
- sclk_spi2 156
- div_i2s1 157
- div_i2s2 158
- sclk_hdmiphy 159
- div_pcm0 160
-
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- gscl0 256
- gscl1 257
- gscl2 258
- gscl3 259
- gscl_wa 260
- gscl_wb 261
- smmu_gscl0 262
- smmu_gscl1 263
- smmu_gscl2 264
- smmu_gscl3 265
- mfc 266
- smmu_mfcl 267
- smmu_mfcr 268
- rotator 269
- jpeg 270
- mdma1 271
- smmu_rotator 272
- smmu_jpeg 273
- smmu_mdma1 274
- pdma0 275
- pdma1 276
- sata 277
- usbotg 278
- mipi_hsi 279
- sdmmc0 280
- sdmmc1 281
- sdmmc2 282
- sdmmc3 283
- sromc 284
- usb2 285
- usb3 286
- sata_phyctrl 287
- sata_phyi2c 288
- uart0 289
- uart1 290
- uart2 291
- uart3 292
- uart4 293
- i2c0 294
- i2c1 295
- i2c2 296
- i2c3 297
- i2c4 298
- i2c5 299
- i2c6 300
- i2c7 301
- i2c_hdmi 302
- adc 303
- spi0 304
- spi1 305
- spi2 306
- i2s1 307
- i2s2 308
- pcm1 309
- pcm2 310
- pwm 311
- spdif 312
- ac97 313
- hsi2c0 314
- hsi2c1 315
- hs12c2 316
- hs12c3 317
- chipid 318
- sysreg 319
- pmu 320
- cmu_top 321
- cmu_core 322
- cmu_mem 323
- tzpc0 324
- tzpc1 325
- tzpc2 326
- tzpc3 327
- tzpc4 328
- tzpc5 329
- tzpc6 330
- tzpc7 331
- tzpc8 332
- tzpc9 333
- hdmi_cec 334
- mct 335
- wdt 336
- rtc 337
- tmu 338
- fimd1 339
- mie1 340
- dsim0 341
- dp 342
- mixer 343
- hdmi 344
- g2d 345
- mdma0 346
- smmu_mdma0 347
-
-
- [Clock Muxes]
-
- Clock ID
- ----------------------------
- mout_hdmi 1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 314>, <&clock 153>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
index 458f34789e5d..ca88c97a8562 100644
--- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -13,184 +13,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- fin_pll 1
-
- [Clock Gate for Special Clocks]
-
- Clock ID
- ----------------------------
- sclk_uart0 128
- sclk_uart1 129
- sclk_uart2 130
- sclk_uart3 131
- sclk_mmc0 132
- sclk_mmc1 133
- sclk_mmc2 134
- sclk_spi0 135
- sclk_spi1 136
- sclk_spi2 137
- sclk_i2s1 138
- sclk_i2s2 139
- sclk_pcm1 140
- sclk_pcm2 141
- sclk_spdif 142
- sclk_hdmi 143
- sclk_pixel 144
- sclk_dp1 145
- sclk_mipi1 146
- sclk_fimd1 147
- sclk_maudio0 148
- sclk_maupcm0 149
- sclk_usbd300 150
- sclk_usbd301 151
- sclk_usbphy300 152
- sclk_usbphy301 153
- sclk_unipro 154
- sclk_pwm 155
- sclk_gscl_wa 156
- sclk_gscl_wb 157
- sclk_hdmiphy 158
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- aclk66_peric 256
- uart0 257
- uart1 258
- uart2 259
- uart3 260
- i2c0 261
- i2c1 262
- i2c2 263
- i2c3 264
- i2c4 265
- i2c5 266
- i2c6 267
- i2c7 268
- i2c_hdmi 269
- tsadc 270
- spi0 271
- spi1 272
- spi2 273
- keyif 274
- i2s1 275
- i2s2 276
- pcm1 277
- pcm2 278
- pwm 279
- spdif 280
- i2c8 281
- i2c9 282
- i2c10 283
- aclk66_psgen 300
- chipid 301
- sysreg 302
- tzpc0 303
- tzpc1 304
- tzpc2 305
- tzpc3 306
- tzpc4 307
- tzpc5 308
- tzpc6 309
- tzpc7 310
- tzpc8 311
- tzpc9 312
- hdmi_cec 313
- seckey 314
- mct 315
- wdt 316
- rtc 317
- tmu 318
- tmu_gpu 319
- pclk66_gpio 330
- aclk200_fsys2 350
- mmc0 351
- mmc1 352
- mmc2 353
- sromc 354
- ufs 355
- aclk200_fsys 360
- tsi 361
- pdma0 362
- pdma1 363
- rtic 364
- usbh20 365
- usbd300 366
- usbd301 377
- aclk400_mscl 380
- mscl0 381
- mscl1 382
- mscl2 383
- smmu_mscl0 384
- smmu_mscl1 385
- smmu_mscl2 386
- aclk333 400
- mfc 401
- smmu_mfcl 402
- smmu_mfcr 403
- aclk200_disp1 410
- dsim1 411
- dp1 412
- hdmi 413
- aclk300_disp1 420
- fimd1 421
- smmu_fimd1 422
- aclk166 430
- mixer 431
- aclk266 440
- rotator 441
- mdma1 442
- smmu_rotator 443
- smmu_mdma1 444
- aclk300_jpeg 450
- jpeg 451
- jpeg2 452
- smmu_jpeg 453
- aclk300_gscl 460
- smmu_gscl0 461
- smmu_gscl1 462
- gscl_wa 463
- gscl_wb 464
- gscl0 465
- gscl1 466
- clk_3aa 467
- aclk266_g2d 470
- sss 471
- slim_sss 472
- mdma0 473
- aclk333_g2d 480
- g2d 481
- aclk333_432_gscl 490
- smmu_3aa 491
- smmu_fimcl0 492
- smmu_fimcl1 493
- smmu_fimcl3 494
- fimc_lite3 495
- aclk_g3d 500
- g3d 501
- smmu_mixer 502
-
- Mux ID
- ----------------------------
-
- mout_hdmi 640
-
- Divider ID
- ----------------------------
-
- dout_pixel 768
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5420.h header and can be used in device
+tree sources.
Example 1: An example of a clock controller node is listed below.
@@ -208,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
- clocks = <&clock 259>, <&clock 130>;
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
index 9955dc9c7d96..5f7005f73058 100644
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -12,45 +12,12 @@ Required Properties:
- #clock-cells: should be 1.
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
- [Core Clocks]
-
- Clock ID
- ----------------------------
-
- xtal 1
- arm_clk 2
-
- [Peripheral Clock Gates]
-
- Clock ID
- ----------------------------
-
- spi_baud 16
- pb0_250 17
- pr0_250 18
- pr1_250 19
- b_250 20
- b_125 21
- b_200 22
- sata 23
- usb 24
- gmac0 25
- cs250 26
- pb0_250_o 27
- pr0_250_o 28
- pr1_250_o 29
- b_250_o 30
- b_125_o 31
- b_200_o 32
- sata_o 33
- usb_o 34
- gmac0_o 35
- cs250_o 36
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5440.h header and can be used in device
+tree sources.
Example: An example of a clock controller node is listed below.
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index f47e56bcf78d..71724d026ffa 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -59,6 +59,7 @@ plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
ramtron,24c64 i2c serial eeprom (24cxx)
ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+sii,s35390a 2-wire CMOS real-time clock
st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
index 9a1175b46f49..0f813dec5e08 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt
@@ -8,32 +8,32 @@ Required properties:
- clock-names: tuple listing input clock names.
Required elements: "adc_clk", "adc_op_clk".
- clocks: phandles to input clocks.
- - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
+ - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
device
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- atmel,adc-vref: Reference voltage in millivolts for the conversions
- - atmel,adc-res: List of resolution in bits supported by the ADC. List size
+ - atmel,adc-res: List of resolutions in bits supported by the ADC. List size
must be two at least.
- atmel,adc-res-names: Contains one identifier string for each resolution
in atmel,adc-res property. "lowres" and "highres"
identifiers are required.
Optional properties:
- - atmel,adc-use-external: Boolean to enable of external triggers
+ - atmel,adc-use-external-triggers: Boolean to enable the external triggers
- atmel,adc-use-res: String corresponding to an identifier from
atmel,adc-res-names property. If not specified, the highest
resolution will be used.
- atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
- atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
- - atmel,adc-ts-wires: Number of touch screen wires. Should be 4 or 5. If this
- value is set, then adc driver will enable touch screen
+ - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this
+ value is set, then the adc driver will enable touchscreen
support.
- NOTE: when adc touch screen enabled, the adc hardware trigger will be
- disabled. Since touch screen will occupied the trigger register.
+ NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+ disabled. Since touchscreen will occupy the trigger register.
- atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
- make touch detect more precision.
-
+ makes touch detection more precise.
+
Optional trigger Nodes:
- Required properties:
* trigger-name: Name of the trigger exposed to the user
@@ -44,42 +44,43 @@ Optional trigger Nodes:
Examples:
adc0: adc@fffb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
- interrupts = <20 4>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&adc_clk>, <&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
- atmel,adc-channel-base = <0x30>;
atmel,adc-channels-used = <0xff>;
- atmel,adc-drdy-mask = <0x10000>;
- atmel,adc-num-channels = <8>;
atmel,adc-startup-time = <40>;
- atmel,adc-status-register = <0x1c>;
- atmel,adc-trigger-register = <0x08>;
- atmel,adc-use-external;
+ atmel,adc-use-external-triggers;
atmel,adc-vref = <3300>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "lowres";
trigger@0 {
+ reg = <0>;
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger@1 {
+ reg = <1>;
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger@2 {
+ reg = <2>;
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger@3 {
+ reg = <3>;
trigger-name = "continuous";
trigger-value = <0x6>;
};
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
new file mode 100644
index 000000000000..636f0ac4e223
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -0,0 +1,27 @@
+Altera SOCFPGA SoC DWMAC controller
+
+This is a variant of the dwmac/stmmac driver an inherits all descriptions
+present in Documentation/devicetree/bindings/net/stmmac.txt.
+
+The device node has additional properties:
+
+Required properties:
+ - compatible : Should contain "altr,socfpga-stmmac" along with
+ "snps,dwmac" and any applicable more detailed
+ designware version numbers documented in stmmac.txt
+ - altr,sysmgr-syscon : Should be the phandle to the system manager node that
+ encompasses the glue register, the register offset, and the register shift.
+
+Example:
+
+gmac0: ethernet@ff700000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+ status = "disabled";
+ reg = <0xff700000 0x2000>;
+ interrupts = <0 115 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+ clocks = <&emac_0_clk>;
+ clocks-names = "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 5748351fb9df..80c1fb8bfbb8 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -31,6 +31,10 @@ Optional properties:
- reset-names: Should contain the reset signal name "stmmaceth", if a
reset phandle is given
- max-frame-size: See ethernet.txt file in the same directory
+- clocks: If present, the first clock should be the GMAC main clock,
+ further clocks may be specified in derived bindings.
+- clocks-names: One name for each entry in the clocks property, the
+ first one should be "stmmaceth".
Examples:
@@ -43,4 +47,6 @@ Examples:
mac-address = [000000000000]; /* Filled in by U-Boot */
max-frame-size = <3800>;
phy-mode = "gmii";
+ clocks = <&clock>;
+ clock-names = "stmmaceth">;
};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 24cee06915c9..c300391e8d3e 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -42,6 +42,10 @@ Required properties:
- 0xc2000000: prefetchable memory region
Please refer to the standard PCI bus binding document for a more detailed
explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
@@ -86,6 +90,10 @@ SoC DTSI:
0 99 0x04>; /* MSI interrupt */
interrupt-names = "intr", "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
new file mode 100644
index 000000000000..5ab26b7e9d35
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -0,0 +1,47 @@
+STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"powerdown" control bits found in the STi family SoC system configuration
+registers. These have been grouped together into a single reset controller
+device for convenience.
+
+The actual action taken when powerdown is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-powerdown"
+ ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- #reset-cells: 1, see below
+
+example:
+
+ powerdown: powerdown-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-powerdown";
+ };
+
+
+Specifying powerdown control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the powerdown device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+ usb1: usb@fe200000 {
+ resets = <&powerdown STIH41X_USB1_POWERDOWN>;
+ };
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
new file mode 100644
index 000000000000..a8d3d3c25ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -0,0 +1,46 @@
+STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"softreset" control bits found in the STi family SoC system configuration
+registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-softreset" example:
+ "st,stih415-softreset" or "st,stih416-softreset";
+- #reset-cells: 1, see below
+
+example:
+
+ softreset: softreset-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-softreset";
+ };
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the softreset device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+ ethernet0{
+ resets = <&softreset STIH415_ETH0_SOFTRESET>;
+ };
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 55f51af08bc7..bc2222ca3f2a 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -57,8 +57,8 @@ Required properties:
- ep childnode: To specify the number of endpoints and their properties.
Optional properties:
- - atmel,vbus-gpio: If present, specifies a gpio that needs to be
- activated for the bus to be powered.
+ - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
+ vbus is present (USB is connected).
Required child node properties:
- name: Name of the endpoint.
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 485a9a1efa7a..3dc231c832b0 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/mfd/omap-usb-host.txt
Example for OMAP4:
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
index 14ab42812a8e..ce8c47cff6d0 100644
--- a/Documentation/devicetree/bindings/usb/ohci-omap3.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -9,7 +9,7 @@ Required properties:
Example for OMAP4:
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 95465d57eb31..0f01c9bf19c8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -35,11 +35,13 @@ dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
dlink D-Link Systems, Inc.
denx Denx Software Engineering
+dmo Data Modul AG
edt Emerging Display Technologies
emmicro EM Microelectronic
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+eukrea Eukréa Electromatique
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
@@ -83,10 +85,12 @@ picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
+qnap QNAP Systems, Inc.
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
renesas Renesas Electronics Corporation
+ricoh Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sbs Smart Battery System
@@ -94,6 +98,7 @@ schindler Schindler
sil Silicon Image
silabs Silicon Laboratories
simtek
+sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
@@ -101,12 +106,14 @@ spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
+synology Synology, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
toshiba Toshiba Corporation
toumaz Toumaz
v3 V3 Semiconductor
via VIA Technologies, Inc.
+voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.