Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...

12 files changed, 209 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/goldfish/audio.txt b/Documentation/devicetree/bindings/goldfish/audio.txt
new file mode 100644
index 000000000000..d043fda433ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/audio.txt
@@ -0,0 +1,17 @@
+Android Goldfish Audio
+
+Android goldfish audio device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-audio" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_audio@9030000 {
+		compatible = "google,goldfish-audio";
+		reg = <0x9030000 0x100>;
+		interrupts = <0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
index 3c10e8581144..165937e1ac1c 100644
--- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -1,8 +1,10 @@
-Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
+Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC
+triaxial accelerometer
 
 Required properties:
 
   - compatible: should contain one of
+    * "fsl,mma8451"
     * "fsl,mma8452"
     * "fsl,mma8453"
     * "fsl,mma8652"
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
new file mode 100644
index 000000000000..3223684a643b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -0,0 +1,28 @@
+* AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,sama5d2-adc".
+  - reg: Should contain ADC registers location and length.
+  - interrupts: Should contain the IRQ line for the ADC.
+  - clocks: phandle to device clock.
+  - clock-names: Must be "adc_clk".
+  - vref-supply: Supply used as reference for conversions.
+  - vddana-supply: Supply for the adc device.
+  - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
+  - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
+  - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+
+Example:
+
+adc: adc@fc030000 {
+	compatible = "atmel,sama5d2-adc";
+	reg = <0xfc030000 0x100>;
+	interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&adc_clk>;
+	clock-names = "adc_clk";
+	atmel,min-sample-rate-hz = <200000>;
+	atmel,max-sample-rate-hz = <20000000>;
+	atmel,startup-time-ms = <4>;
+	vddana-supply = <&vdd_3v3_lp_reg>;
+	vref-supply = <&vdd_3v3_lp_reg>;
+}
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
index dcae4ccfcc52..82bcce07255d 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt
@@ -6,6 +6,7 @@ Required properties:
 	"microchip,mcp3422" or
 	"microchip,mcp3423" or
 	"microchip,mcp3424" or
+	"microchip,mcp3425" or
 	"microchip,mcp3426" or
 	"microchip,mcp3427" or
 	"microchip,mcp3428"
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
new file mode 100644
index 000000000000..d91130587d01
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
@@ -0,0 +1,19 @@
+* Texas Instruments' ADC0831/ADC0832/ADC0832/ADC0838
+
+Required properties:
+ - compatible: Should be one of
+	* "ti,adc0831"
+	* "ti,adc0832"
+	* "ti,adc0834"
+	* "ti,adc0838"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+ - spi-max-frequency: Max SPI frequency to use (< 400000)
+
+Example:
+adc@0 {
+	compatible = "ti,adc0832";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+	spi-max-frequency = <200000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
new file mode 100644
index 000000000000..cffa1907463a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific pH-SM OEM sensor
+
+http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,ph-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@65 {
+	compatible = "atlas,ph-sm";
+	reg = <0x65>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
new file mode 100644
index 000000000000..20c6c7ae9687
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/vf610-dac.txt
@@ -0,0 +1,20 @@
+Freescale vf610 Digital to Analog Converter bindings
+
+The devicetree bindings are for the new DAC driver written for
+vf610 SoCs from Freescale.
+
+Required properties:
+- compatible: Should contain "fsl,vf610-dac"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain the interrupt for the device
+- clocks: The clock is needed by the DAC controller
+- clock-names: Must contain "dac" matching entry in the clocks property.
+
+Example:
+dac0: dac@400cc000 {
+	compatible = "fsl,vf610-dac";
+	reg = <0x400cc000 0x1000>;
+	interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "dac";
+	clocks = <&clks VF610_CLK_DAC0>;
+};
diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
new file mode 100644
index 000000000000..2fffd70336ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
@@ -0,0 +1,34 @@
+Texas Instruments AFE4403 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4403".
+ - reg			: SPI chip select address of device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupt-parent	: Phandle to he parent interrupt controller.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../../gpio/gpio.txt.
+
+For other required and optional properties of SPI slave nodes
+please refer to ../../spi/spi-bus.txt.
+
+Example:
+
+&spi0 {
+	heart_mon@0 {
+		compatible = "ti,afe4403";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 000000000000..de69f203edfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,30 @@
+Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4404".
+ - reg			: I2C address of the device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupt-parent	: Phandle to he parent interrupt controller.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../gpio/gpio.txt.
+
+Example:
+
+&i2c2 {
+	heart_mon@58 {
+		compatible = "ti,afe4404";
+		reg = <0x58>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index f6fbac66ad06..295a9edfa4fd 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -11,11 +11,19 @@ Required properties:
   Refer to interrupt-controller/interrupts.txt for generic
   interrupt client node bindings.
 
+Optional properties:
+  - maxim,led-current-microamp: configuration for LED current in microamperes
+    while the engine is running. First indexed value is the configuration for
+    the RED LED, and second value is for the IR LED.
+
+    Refer to the datasheet for the allowed current values.
+
 Example:
 
 max30100@057 {
 	compatible = "maxim,max30100";
 	reg = <57>;
+	maxim,led-current-microamp = <24000 50000>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 2>;
 };
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
new file mode 100644
index 000000000000..eac30d508849
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -0,0 +1,26 @@
+* Texas Instruments OPT3001 Ambient Light Sensor
+
+The driver supports interrupt-driven and interrupt-less operation, depending
+on whether an interrupt property has been populated into the DT. Note that
+the optional generation of IIO events on rising/falling light threshold changes
+requires the use of interrupts. Without interrupts, only the simple reading
+of the current light value is supported through the IIO API.
+
+http://www.ti.com/product/opt3001
+
+Required properties:
+  - compatible: should be "ti,opt3001"
+  - reg: the I2C address of the sensor
+
+Optional properties:
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
+
+Example:
+
+opt3001@44 {
+	compatible = "ti,opt3001";
+	reg = <0x44>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index bd33a268fd1b..ee66defcdd8b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -28,6 +28,7 @@ arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 artesyn	Artesyn Embedded Technologies Inc.
 asahi-kasei	Asahi Kasei Corp.
+atlas	Atlas Scientific LLC
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies