summaryrefslogtreecommitdiff
path: root/Documentation/devicetree
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-10-26 12:09:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-10-26 12:09:58 -0700
commitb27186abb37b7bd19e0ca434f4f425c807dbd708 (patch)
tree8f20702cf0744cc66907d3b8578a8083cd25d680 /Documentation/devicetree
parent0ef7791e2bfb2e10aa95dc492eab72074cef9942 (diff)
parentd061864b89c3234b53d8884027b0cd6f06bd3149 (diff)
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/arm/al,alpine.txt72
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt170
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-sysregs.txt171
-rw-r--r--Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp34
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.txt39
-rw-r--r--Documentation/devicetree/bindings/arm/secure.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/zte,sysctrl.txt30
-rw-r--r--Documentation/devicetree/bindings/arm/zte.txt27
-rw-r--r--Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt2
-rw-r--r--Documentation/devicetree/bindings/fpga/fpga-region.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/arizona.txt2
-rw-r--r--Documentation/devicetree/bindings/misc/lwn-bk4.txt26
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_can.txt1
-rw-r--r--Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt1
-rw-r--r--Documentation/devicetree/bindings/reset/fsl,imx7-src.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt2
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,ostm.txt3
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/renesas-wdt.txt1
23 files changed, 332 insertions, 320 deletions
diff --git a/Documentation/devicetree/bindings/arm/al,alpine.txt b/Documentation/devicetree/bindings/arm/al,alpine.txt
index f404a4f9b165..d00debe2e86f 100644
--- a/Documentation/devicetree/bindings/arm/al,alpine.txt
+++ b/Documentation/devicetree/bindings/arm/al,alpine.txt
@@ -14,75 +14,3 @@ compatible: must contain "al,alpine"
...
}
-
-* CPU node:
-
-The Alpine platform includes cortex-a15 cores.
-enable-method: must be "al,alpine-smp" to allow smp [1]
-
-Example:
-
-cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "al,alpine-smp";
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- };
-};
-
-
-* Alpine CPU resume registers
-
-The CPU resume register are used to define required resume address after
-reset.
-
-Properties:
-- compatible : Should contain "al,alpine-cpu-resume".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-cpu_resume {
- compatible = "al,alpine-cpu-resume";
- reg = <0xfbff5ed0 0x30>;
-};
-
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-nb_service {
- compatible = "al,alpine-sysfabric-service", "syscon";
- reg = <0xfb070000 0x10000>;
-};
-
-[1] arm/cpu-enable-method/al,alpine-smp
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 31220b54d85d..4bf1b4da7659 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -70,173 +70,3 @@ compatible: must be one of:
- "atmel,samv71q19"
- "atmel,samv71q20"
- "atmel,samv71q21"
-
-Chipid required properties:
-- compatible: Should be "atmel,sama5d2-chipid"
-- reg : Should contain registers location and length
-
-PIT Timer required properties:
-- compatible: Should be "atmel,at91sam9260-pit"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the PIT which is the IRQ line
- shared across all System Controller members.
-
-System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the ST which is the IRQ line
- shared across all System Controller members.
-- clocks: phandle to input clock.
-Its subnodes can be:
-- watchdog: compatible should be "atmel,at91rm9200-wdt"
-
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
- rstc@fffffd00 {
- compatible = "atmel,at91sam9260-rstc";
- reg = <0xfffffd00 0x10>;
- clocks = <&clk32k>;
- };
-
-RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
- "atmel,at91sam9260-sdramc",
- "atmel,at91sam9g45-ddramc",
- "atmel,sama5d3-ddramc",
-- reg: Should contain registers location and length
-
-Examples:
-
- ramc0: ramc@ffffe800 {
- compatible = "atmel,at91sam9g45-ddramc";
- reg = <0xffffe800 0x200>;
- };
-
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
- <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
- Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
- shdwc@fffffd10 {
- compatible = "atmel,at91sam9260-shdwc";
- reg = <0xfffffd10 0x10>;
- clocks = <&clk32k>;
- };
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
- microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
- by the child, forces the wake-up of the core power supply on a high level.
- The default is to be active low.
-
-Example:
-
-On the SoC side:
- shdwc@f8048010 {
- compatible = "atmel,sama5d2-shdwc";
- reg = <0xf8048010 0x10>;
- clocks = <&clk32k>;
- #address-cells = <1>;
- #size-cells = <0>;
- atmel,wakeup-rtc-timer;
- };
-
-On the board side:
- shdwc@f8048010 {
- debounce-delay-us = <976>;
-
- input@0 {
- reg = <0>;
- };
-
- input@1 {
- reg = <1>;
- atmel,wakeup-active-high;
- };
- };
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-- reg: Should contain registers location and length
-
- sfr@f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
- <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-
- secumod@fc040000 {
- compatible = "atmel,sama5d2-secumod", "syscon";
- reg = <0xfc040000 0x100>;
- };
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
new file mode 100644
index 000000000000..4b96608ad692
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -0,0 +1,171 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+ shared across all System Controller members.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+ shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RSTC Reset Controller required properties:
+- compatible: Should be "atmel,<chip>-rstc".
+ <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+Example:
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ clocks = <&clk32k>;
+ };
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+ "atmel,at91sam9260-sdramc",
+ "atmel,at91sam9g45-ddramc",
+ "atmel,sama5d3-ddramc",
+- reg: Should contain registers location and length
+
+Examples:
+
+ ramc0: ramc@ffffe800 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe800 0x200>;
+ };
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+ <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+ Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ clocks = <&clk32k>;
+ };
+
+SHDWC SAMA5D2-Compatible Shutdown Controller
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc".
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+ microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+ by the child, forces the wake-up of the core power supply on a high level.
+ The default is to be active low.
+
+Example:
+
+On the SoC side:
+ shdwc@f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ };
+
+On the board side:
+ shdwc@f8048010 {
+ debounce-delay-us = <976>;
+
+ input@0 {
+ reg = <0>;
+ };
+
+ input@1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+ "atmel,<chip>-sfrbu", "syscon"
+ <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+- reg: Should contain registers location and length
+
+ sfr@f0038000 {
+ compatible = "atmel,sama5d3-sfr", "syscon";
+ reg = <0xf0038000 0x60>;
+ };
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+ <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+
+ secumod@fc040000 {
+ compatible = "atmel,sama5d2-secumod", "syscon";
+ reg = <0xfc040000 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
index c2e0cc5e4cfd..35e5afb6d9ad 100644
--- a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -14,7 +14,28 @@ Related properties: (none)
Note:
This enable method requires valid nodes compatible with
-"al,alpine-cpu-resume" and "al,alpine-nb-service"[1].
+"al,alpine-cpu-resume" and "al,alpine-nb-service".
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+
+* Alpine System-Fabric Service Registers
+
+The System-Fabric Service Registers allow various operation on CPU and
+system fabric, like powering CPUs off.
+
+Properties:
+- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
+- reg : Offset and length of the register set for the device
+
Example:
@@ -48,5 +69,12 @@ cpus {
};
};
---
-[1] arm/al,alpine.txt
+cpu_resume {
+ compatible = "al,alpine-cpu-resume";
+ reg = <0xfbff5ed0 0x30>;
+};
+
+nb_service {
+ compatible = "al,alpine-sysfabric-service", "syscon";
+ reg = <0xfb070000 0x10000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 96dfccc0faa8..b0198a1cf403 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -276,7 +276,7 @@ described below.
Usage: optional
Value type: <prop-encoded-array>
Definition: A u32 value that represents the running time dynamic
- power coefficient in units of mW/MHz/uV^2. The
+ power coefficient in units of uW/MHz/V^2. The
coefficient can either be calculated from power
measurements or derived by analysis.
@@ -287,7 +287,7 @@ described below.
Pdyn = dynamic-power-coefficient * V^2 * f
- where voltage is in uV, frequency is in MHz.
+ where voltage is in V, frequency is in MHz.
Example 1 (dual-cluster big.LITTLE system 32-bit):
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
new file mode 100644
index 000000000000..b5cb374dc47d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
@@ -0,0 +1,19 @@
+Freescale DCFG
+
+DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+
+Required properties:
+ - compatible: Should contain a chip-specific compatible string,
+ Chip-specific strings are of the form "fsl,<chip>-dcfg",
+ The following <chip>s are known to be supported:
+ ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+ - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
new file mode 100644
index 000000000000..0ab67b0b216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
@@ -0,0 +1,19 @@
+Freescale SCFG
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+ - compatible: Should contain a chip-specific compatible string,
+ Chip-specific strings are of the form "fsl,<chip>-scfg",
+ The following <chip>s are known to be supported:
+ ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+ - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 8a1baa2b9723..1e775aaa5c5b 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -101,45 +101,6 @@ Freescale LS1021A Platform Device Tree Bindings
Required root node compatible properties:
- compatible = "fsl,ls1021a";
-Freescale SoC-specific Device Tree Bindings
--------------------------------------------
-
-Freescale SCFG
- SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
- Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-scfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
- - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
- scfg: scfg@1570000 {
- compatible = "fsl,ls1021a-scfg";
- reg = <0x0 0x1570000 0x0 0x10000>;
- };
-
-Freescale DCFG
- DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
- Required properties:
- - compatible: Should contain a chip-specific compatible string,
- Chip-specific strings are of the form "fsl,<chip>-dcfg",
- The following <chip>s are known to be supported:
- ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
- - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
- dcfg: dcfg@1ee0000 {
- compatible = "fsl,ls1021a-dcfg";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
- };
-
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt
index e31303fb233a..f27bbff2c780 100644
--- a/Documentation/devicetree/bindings/arm/secure.txt
+++ b/Documentation/devicetree/bindings/arm/secure.txt
@@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These
secure- bindings only need to be used where both the Secure and Normal
world views need to be described in a single device tree.
-Valid Secure world properties:
+Valid Secure world properties
+-----------------------------
- secure-status : specifies whether the device is present and usable
in the secure world. The combination of this with "status" allows
@@ -51,3 +52,19 @@ Valid Secure world properties:
status = "disabled"; secure-status = "okay"; /* S-only */
status = "disabled"; /* disabled in both */
status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the Secure OS. Only the properties defined
+below may appear in the /secure-chosen node.
+
+- stdout-path : specifies the device to be used by the Secure OS for
+ its console output. The syntax is the same as for /chosen/stdout-path.
+ If the /secure-chosen node exists but the stdout-path property is not
+ present, the Secure OS should not perform any console output. If
+ /secure-chosen does not exist, the Secure OS should use the value of
+ /chosen/stdout-path instead (that is, use the same device as the
+ Normal world OS).
diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
new file mode 100644
index 000000000000..7e66b7f7ba96
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt
@@ -0,0 +1,30 @@
+ZTE sysctrl Registers
+
+Registers for 'zte,zx296702' SoC:
+
+System management required properties:
+ - compatible = "zte,sysctrl"
+
+Low power management required properties:
+ - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+ - compatible = "zte,zx-bus-matrix"
+
+
+Registers for 'zte,zx296718' SoC:
+
+System management required properties:
+ - compatible = "zte,zx296718-aon-sysctrl"
+ - compatible = "zte,zx296718-sysctrl"
+
+Example:
+aon_sysctrl: aon-sysctrl@116000 {
+ compatible = "zte,zx296718-aon-sysctrl", "syscon";
+ reg = <0x116000 0x1000>;
+};
+
+sysctrl: sysctrl@1463000 {
+ compatible = "zte,zx296718-sysctrl", "syscon";
+ reg = <0x1463000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
index 83369785d29c..340612794a37 100644
--- a/Documentation/devicetree/bindings/arm/zte.txt
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -1,20 +1,10 @@
ZTE platforms device tree bindings
----------------------------------------
+---------------------------------------
- ZX296702 board:
Required root node properties:
- compatible = "zte,zx296702-ad1", "zte,zx296702"
-System management required properties:
- - compatible = "zte,sysctrl"
-
-Low power management required properties:
- - compatible = "zte,zx296702-pcu"
-
-Bus matrix required properties:
- - compatible = "zte,zx-bus-matrix"
-
-
---------------------------------------
- ZX296718 SoC:
Required root node properties:
@@ -22,18 +12,3 @@ Bus matrix required properties:
ZX296718 EVB board:
- "zte,zx296718-evb"
-
-System management required properties:
- - compatible = "zte,zx296718-aon-sysctrl"
- - compatible = "zte,zx296718-sysctrl"
-
-Example:
-aon_sysctrl: aon-sysctrl@116000 {
- compatible = "zte,zx296718-aon-sysctrl", "syscon";
- reg = <0x116000 0x1000>;
-};
-
-sysctrl: sysctrl@1463000 {
- compatible = "zte,zx296718-sysctrl", "syscon";
- reg = <0x1463000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
index 78d2db9d4de5..d28fd1af01b4 100644
--- a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
+++ b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
@@ -24,7 +24,7 @@ Optional properties:
Example:
-p1_sec_a: crypto@400,d2000000 {
+p1_sec_a: crypto@400d2000000 {
compatible = "hisilicon,hip07-sec";
reg = <0x400 0xd0000000 0x0 0x10000
0x400 0xd2000000 0x0 0x10000
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 6db8aeda461a..90c44694a30b 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -415,7 +415,7 @@ DT Overlay contains:
firmware-name = "base.rbf";
fpga-bridge@4400 {
- compatible = "altr,freeze-bridge";
+ compatible = "altr,freeze-bridge-controller";
reg = <0x4400 0x10>;
fpga_region1: fpga-region1 {
@@ -427,7 +427,7 @@ DT Overlay contains:
};
fpga-bridge@4420 {
- compatible = "altr,freeze-bridge";
+ compatible = "altr,freeze-bridge-controller";
reg = <0x4420 0x10>;
fpga_region2: fpga-region2 {
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 11263982470e..44efafdfd7f5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -84,7 +84,7 @@ Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
-Alternatively, devices supporting SMbus Host Notify, and connected to
+Alternatively, devices supporting SMBus Host Notify, and connected to
adapters that support this feature, may use "host-notify" property. I2C
core will create a virtual interrupt for Host Notify and assign it as
primary interrupt for the slave.
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 9b62831fdf3e..148ef621a5e5 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -76,7 +76,7 @@ Deprecated properties:
Also see child specific device properties:
Regulator - ../regulator/arizona-regulator.txt
Extcon - ../extcon/extcon-arizona.txt
- Sound - ../sound/arizona.txt
+ Sound - ../sound/wlf,arizona.txt
Example:
diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
new file mode 100644
index 000000000000..d6a8c188c087
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
@@ -0,0 +1,26 @@
+* Liebherr's BK4 controller external SPI
+
+A device which handles data acquisition from compatible industrial
+peripherals.
+The SPI is used for data and management purposes in both master and
+slave modes.
+
+Required properties:
+
+- compatible : Should be "lwn,bk4"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+ the controller.
+
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
+ 30MHz at most for the Liebherr's BK4 external bus.
+
+Example:
+
+spidev0: spi@0 {
+ compatible = "lwn,bk4";
+ spi-max-frequency = <30000000>;
+ reg = <0>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 94a7f33ac5e9..cc4372842bf3 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -3,6 +3,7 @@ Renesas R-Car CAN controller Device Tree Bindings
Required properties:
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
+ "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index eeb9e1874ea6..4f0879a0ca12 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -5,6 +5,7 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
+ "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
"renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index 5e1afc3d8480..1ab1d109318e 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -5,7 +5,7 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
-- compatible: Should be "fsl,imx7-src", "syscon"
+- compatible: Should be "fsl,imx7d-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index 49948fcc0631..33992679a8bd 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -24,6 +24,8 @@ Required Properties:
- "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
- "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
- "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
+ - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
+ - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
- "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
- "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
- "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
index be3ae0fdf775..81a78f8bcf17 100644
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
@@ -9,7 +9,8 @@ Channels are independent from each other.
Required Properties:
- compatible: must be one or more of the following:
- - "renesas,r7s72100-ostm" for the r7s72100 OSTM
+ - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
+ - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
- "renesas,ostm" for any OSTM
This is a fallback for the above renesas,*-ostm entries
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index f26bf667e530..376f24484182 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -127,6 +127,7 @@ everspin Everspin Technologies, Inc.
exar Exar Corporation
excito Excito
ezchip EZchip Semiconductor
+facebook Facebook
fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fastrax Fastrax Oy
@@ -275,6 +276,7 @@ nxp NXP Semiconductors
okaya Okaya Electric America, Inc.
oki Oki Electric Industry Co., Ltd.
olimex OLIMEX Ltd.
+olpc One Laptop Per Child
onion Onion Corporation
onnn ON Semiconductor Corp.
ontat On Tat Industrial Company
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
index 9407212a85a8..d72d1181ec62 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
version.
Examples with soctypes are:
- "renesas,r8a7743-wdt" (RZ/G1M)
+ - "renesas,r8a7744-wdt" (RZ/G1N)
- "renesas,r8a7745-wdt" (RZ/G1E)
- "renesas,r8a774a1-wdt" (RZ/G2M)
- "renesas,r8a7790-wdt" (R-Car H2)