diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2022-05-19 16:29:13 +0200 |
---|---|---|
committer | Philippe Schenker <philippe.schenker@toradex.com> | 2022-05-19 16:29:13 +0200 |
commit | e6fb5c32f78f99682821f91b3959e222c93e4cb9 (patch) | |
tree | 3f6c281a7d83a6e3c0a153f93718f7cd9a39b6f7 /Documentation/devicetree | |
parent | 585dc27c53b6c1a32a7e11b724e91d7297388a13 (diff) | |
parent | b7007e1d615b8d4b71c28ebf790c5164fc4491d5 (diff) |
Merge remote-tracking branch 'gh-fslc/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imx
Diffstat (limited to 'Documentation/devicetree')
7 files changed, 29 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index fb747682006d..92dc08b78a17 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller maintainers: - Neil Armstrong <narmstrong@baylibre.com> +allOf: + - $ref: /schemas/sound/name-prefix.yaml# + description: | The Amlogic Meson Synopsys Designware Integration is composed of - A Synopsys DesignWare HDMI Controller IP @@ -101,6 +104,8 @@ properties: "#sound-dai-cells": const: 0 + sound-name-prefix: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index d1205a6697a0..766b04501cb9 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -78,6 +78,10 @@ properties: interrupts: maxItems: 1 + amlogic,canvas: + description: should point to a canvas provider node + $ref: /schemas/types.yaml#/definitions/phandle + power-domains: maxItems: 1 description: phandle to the associated power domain @@ -106,6 +110,7 @@ required: - port@1 - "#address-cells" - "#size-cells" + - amlogic,canvas examples: - | @@ -116,6 +121,7 @@ examples: interrupts = <3>; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ port@0 { diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index d261b7096c69..2767f182fd3c 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -44,7 +44,7 @@ patternProperties: properties: reg: description: - Contains the native Ready/Busy IDs. + Contains the chip-select IDs. nand-ecc-mode: allOf: @@ -139,6 +139,6 @@ examples: nand-ecc-mode = "soft"; nand-ecc-algo = "bch"; - /* controller specific properties */ + /* NAND chip specific properties */ }; }; diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index 9cb3560756d0..53c26ffd020a 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <10000000>; - bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>; + bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>; interrupt-parent = <&gpio1>; interrupts = <14 IRQ_TYPE_LEVEL_LOW>; device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index f70f18ff821f..8f3e9c774b74 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -87,6 +87,14 @@ properties: compensate for the board being designed with the lanes swapped. + enet-phy-lane-no-swap: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates that PHY will disable swap of the + TX/RX lanes. This property allows the PHY to work correcly after + e.g. wrong bootstrap configuration caused by issues in PCB + layout design. + eee-broken-100tx: $ref: /schemas/types.yaml#definitions/flag description: diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index 38dc56a57760..ecec514b3155 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -43,19 +43,19 @@ group emmc_nb group pwm0 - pin 11 (GPIO1-11) - - functions pwm, gpio + - functions pwm, led, gpio group pwm1 - pin 12 - - functions pwm, gpio + - functions pwm, led, gpio group pwm2 - pin 13 - - functions pwm, gpio + - functions pwm, led, gpio group pwm3 - pin 14 - - functions pwm, gpio + - functions pwm, led, gpio group pmic1 - pin 7 diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt index 529f2dab2648..7bcbb229b78b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mxic.txt +++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt @@ -8,11 +8,13 @@ Required properties: - reg: should contain 2 entries, one for the registers and one for the direct mapping area - reg-names: should contain "regs" and "dirmap" -- interrupts: interrupt line connected to the SPI controller - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk" - clocks: should contain 3 entries for the "ps_clk", "send_clk" and "send_dly_clk" clocks +Optional properties: +- interrupts: interrupt line connected to the SPI controller + Example: spi@43c30000 { |