Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm for 4.3.  Nouveau is
  probably the biggest amount of changes in here, since it missed 4.2.
  Highlights below, along with the usual bunch of fixes.

  All stuff outside drm should have applicable acks.

  Highlights:

   - new drivers:
        freescale dcu kms driver

   - core:
        more atomic fixes
        disable some dri1 interfaces on kms drivers
        drop fb panic handling, this was just getting more broken, as more locking was required.
        new core fbdev Kconfig support - instead of each driver enable/disabling it
        struct_mutex cleanups

   - panel:
        more new panels
        cleanup Kconfig

   - i915:
        Skylake support enabled by default
        legacy modesetting using atomic infrastructure
        Skylake fixes
        GEN9 workarounds

   - amdgpu:
        Fiji support
        CGS support for amdgpu
        Initial GPU scheduler - off by default
        Lots of bug fixes and optimisations.

   - radeon:
        DP fixes
        misc fixes

   - amdkfd:
        Add Carrizo support for amdkfd using amdgpu.

   - nouveau:
        long pending cleanup to complete driver,
        fully bisectable which makes it larger,
        perfmon work
        more reclocking improvements
        maxwell displayport fixes

   - vmwgfx:
        new DX device support, supports OpenGL 3.3
        screen targets support

   - mgag200:
        G200eW support
        G200e new revision support

   - msm:
        dragonboard 410c support, msm8x94 support, msm8x74v1 support
        yuv format support
        dma plane support
        mdp5 rotation
        initial hdcp

   - sti:
        atomic support

   - exynos:
        lots of cleanups
        atomic modesetting/pageflipping support
        render node support

   - tegra:
        tegra210 support (dc, dsi, dp/hdmi)
        dpms with atomic modesetting support

   - atmel:
        support for 3 more atmel SoCs
        new input formats, PRIME support.

   - dwhdmi:
        preparing to add audio support

   - rockchip:
        yuv plane support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  ...

10 files changed, 141 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt
index cd8fe6cf536c..d56923cd5590 100644
--- a/Documentation/devicetree/bindings/drm/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt
@@ -30,20 +30,27 @@ Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
   See files in Documentation/devicetree/bindings/panel/ for each supported
   panel.
-- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
   driving a panel which needs 2 DSI links.
-- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
   the master link of the 2-DSI panel.
-- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
   driving a 2-DSI panel whose 2 links need receive command simultaneously.
 - interrupt-parent: phandle to the MDP block if the interrupt signal is routed
   through MDP block
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-n: the "sleep" pinctrl state
+- port: DSI controller output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected panel's endpoint.
+  See Documentation/devicetree/bindings/graph.txt for device graph info.
 
 DSI PHY:
 Required properties:
 - compatible: Could be the following
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
+  * "qcom,dsi-phy-20nm"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
@@ -59,6 +66,10 @@ Required properties:
   * "iface_clk"
 - vddio-supply: phandle to vdd-io regulator device node
 
+Optional properties:
+- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
+  regulator is wanted.
+
 Example:
 	mdss_dsi0: qcom,mdss_dsi@fd922800 {
 		compatible = "qcom,mdss-dsi-ctrl";
@@ -90,9 +101,13 @@ Example:
 
 		qcom,dsi-phy = <&mdss_dsi_phy0>;
 
-		qcom,dual-panel-mode;
-		qcom,master-panel;
-		qcom,sync-dual-panel;
+		qcom,dual-dsi-mode;
+		qcom,master-dsi;
+		qcom,sync-dual-dsi;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&mdss_dsi_active>;
+		pinctrl-1 = <&mdss_dsi_suspend>;
 
 		panel: panel@0 {
 			compatible = "sharp,lq101r1sx01";
@@ -101,6 +116,18 @@ Example:
 
 			power-supply = <...>;
 			backlight = <...>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
 		};
 	};
 
@@ -117,4 +144,6 @@ Example:
 		clock-names = "iface_clk";
 		clocks = <&mmcc MDSS_AHB_CLK>;
 		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy-regulator-ldo-mode;
 	};
diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index c43aa53debed..e926239e1101 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -2,8 +2,9 @@ Qualcomm adreno/snapdragon hdmi output
 
 Required properties:
 - compatible: one of the following
+   * "qcom,hdmi-tx-8994"
    * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8074"
+   * "qcom,hdmi-tx-8974"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index 009f4bfa1590..e685610d38e2 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -197,9 +197,11 @@ of the following host1x client modules:
 - sor: serial output resource
 
   Required properties:
-  - compatible: For Tegra124, must contain "nvidia,tegra124-sor".  Otherwise,
-    must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip>
-    is tegra132.
+  - compatible: Should be:
+    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
+    - "nvidia,tegra132-sor": for Tegra132
+    - "nvidia,tegra210-sor": for Tegra210
+    - "nvidia,tegra210-sor1": for Tegra210
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
index 6b1d75f1a529..a36dfce0032e 100644
--- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
+++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt
@@ -52,10 +52,9 @@ STMicroelectronics stih4xx platforms
     See ../reset/reset.txt for details.
   - reset-names: names of the resets listed in resets property in the same
     order.
-  - ranges: to allow probing of subdevices
 
 - sti-hdmi: hdmi output block
-  must be a child of sti-tvout
+  must be a child of sti-display-subsystem
   Required properties:
   - compatible: "st,stih<chip>-hdmi";
   - reg: Physical base address of the IP registers and length of memory mapped region.
@@ -72,7 +71,7 @@ STMicroelectronics stih4xx platforms
 
 sti-hda:
   Required properties:
-  must be a child of sti-tvout
+  must be a child of sti-display-subsystem
   - compatible: "st,stih<chip>-hda"
   - reg: Physical base address of the IP registers and length of memory mapped region.
   - reg-names: names of the mapped memory regions listed in regs property in
@@ -85,7 +84,7 @@ sti-hda:
 
 sti-dvo:
   Required properties:
-  must be a child of sti-tvout
+  must be a child of sti-display-subsystem
   - compatible: "st,stih<chip>-dvo"
   - reg: Physical base address of the IP registers and length of memory mapped region.
   - reg-names: names of the mapped memory regions listed in regs property in
@@ -195,38 +194,37 @@ Example:
 			reg-names	= "tvout-reg", "hda-reg", "syscfg";
 			reset-names     = "tvout";
 			resets          = <&softreset STIH416_HDTVOUT_SOFTRESET>;
-			ranges;
-
-			sti-hdmi@fe85c000 {
-				compatible	= "st,stih416-hdmi";
-				reg		= <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
-				reg-names	= "hdmi-reg", "syscfg";
-				interrupts	= <GIC_SPI 173 IRQ_TYPE_NONE>;
-				interrupt-names	= "irq";
-				clock-names	= "pix", "tmds", "phy", "audio";
-				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
-			};
-
-			sti-hda@fe85a000 {
-				compatible	= "st,stih416-hda";
-				reg		= <0xfe85a000 0x400>, <0xfe83085c 0x4>;
-				reg-names	= "hda-reg", "video-dacs-ctrl";
-				clock-names	= "pix", "hddac";
-				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
-			};
-
-			sti-dvo@8d00400 {
-				compatible	= "st,stih407-dvo";
-				reg		= <0x8d00400 0x200>;
-				reg-names	= "dvo-reg";
-				clock-names	= "dvo_pix", "dvo",
-						  "main_parent", "aux_parent";
-				clocks		= <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
-						  <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&pinctrl_dvo>;
-				sti,panel	= <&panel_dvo>;
-			};
+		};
+
+		sti-hdmi@fe85c000 {
+			compatible	= "st,stih416-hdmi";
+			reg		= <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+			reg-names	= "hdmi-reg", "syscfg";
+			interrupts	= <GIC_SPI 173 IRQ_TYPE_NONE>;
+			interrupt-names	= "irq";
+			clock-names	= "pix", "tmds", "phy", "audio";
+			clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+		};
+
+		sti-hda@fe85a000 {
+			compatible	= "st,stih416-hda";
+			reg		= <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+			reg-names	= "hda-reg", "video-dacs-ctrl";
+			clock-names	= "pix", "hddac";
+			clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+		};
+
+		sti-dvo@8d00400 {
+			compatible	= "st,stih407-dvo";
+			reg		= <0x8d00400 0x200>;
+			reg-names	= "dvo-reg";
+			clock-names	= "dvo_pix", "dvo",
+					  "main_parent", "aux_parent";
+			clocks		= <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+					  <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_dvo>;
+			sti,panel	= <&panel_dvo>;
 		};
 
 		sti-hqvdp@9c000000 {
@@ -237,7 +235,7 @@ Example:
 				reset-names     = "hqvdp";
 				resets          = <&softreset STIH407_HDQVDP_SOFTRESET>;
 				st,vtg		= <&vtg_main>;
-			};
+		};
 	};
 	...
 };
diff --git a/Documentation/devicetree/bindings/panel/auo,b080uan01.txt b/Documentation/devicetree/bindings/panel/auo,b080uan01.txt
new file mode 100644
index 000000000000..bae0e2b51467
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/auo,b080uan01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101ean01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/lg,lg4573.txt b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
new file mode 100644
index 000000000000..824441f4e95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/lg,lg4573.txt
@@ -0,0 +1,19 @@
+LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+Required properties:
+  - compatible: "lg,lg4573"
+  - reg: address of the panel on the SPI bus
+
+The panel must obey rules for SPI slave device specified in document [1].
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	lcd_panel: display@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt b/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt
new file mode 100644
index 000000000000..8e1914d1edb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/nec,nl4827hc19-05b.txt
@@ -0,0 +1,7 @@
+NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "nec,nl4827hc19-05b"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt b/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt
new file mode 100644
index 000000000000..ddf8e211d382
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/okaya,rs800480t-7x0gp.txt
@@ -0,0 +1,7 @@
+OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+
+Required properties:
+- compatible: should be "okaya,rs800480t-7x0gp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ab1e493b2be4..ac5f0c34ae00 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -145,6 +145,7 @@ mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
 national	National Semiconductor
+nec	NEC LCD Technologies, Ltd.
 neonode		Neonode Inc.
 netgear	NETGEAR
 netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
@@ -155,6 +156,7 @@ nokia	Nokia
 nuvoton	Nuvoton Technology Corporation
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+okaya	Okaya Electric America, Inc.
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 option	Option NV
diff --git a/Documentation/devicetree/bindings/video/fsl,dcu.txt b/Documentation/devicetree/bindings/video/fsl,dcu.txt
new file mode 100644
index 000000000000..ebf1be9ae393
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/fsl,dcu.txt
@@ -0,0 +1,22 @@
+Device Tree bindings for Freescale DCU DRM Driver
+
+Required properties:
+- compatible:		Should be one of
+	* "fsl,ls1021a-dcu".
+	* "fsl,vf610-dcu".
+
+- reg:			Address and length of the register set for dcu.
+- clocks:		From common clock binding: handle to dcu clock.
+- clock-names:		From common clock binding: Shall be "dcu".
+- big-endian		Boolean property, LS1021A DCU registers are big-endian.
+- fsl,panel:		The phandle to panel node.
+
+Examples:
+dcu: dcu@2ce0000 {
+	compatible = "fsl,ls1021a-dcu";
+	reg = <0x0 0x2ce0000 0x0 0x10000>;
+	clocks = <&platform_clk 0>;
+	clock-names = "dcu";
+	big-endian;
+	fsl,panel = <&panel>;
+};