Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt

3.16 third DT series:
- move of both at91sam9n12 and at91sam9x5 to CCF

* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
  ARM: at91: move sam9n12 SoC to the CCF
  ARM: at91/dt: define sam9n12ek crystal frequencies
  ARM: at91/dt: define sam9n12 clocks
  ARM: at91: prepare common clk transition for sam9n12 SoC
  ARM: at91: move sam9x5 SoCs to the CCF
  ARM: at91/dt: define sam9x5ek's crystal frequencies
  ARM: at91/dt: define sam9x5 clocks
  ARM: at91: prepare common clk transition for sam9x5 SoCs
  dt-bindings: clock: Move at91.h to dt-bindigs/clock
  ARM: at91: fix spi cs on sama5d3 Xplained board

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 1 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 27f9a27bb754..b3d544ca522a 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -139,7 +139,7 @@ Required properties for PMC node:
 - interrupt-controller : tell that the PMC is an interrupt controller.
 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
 	and reflect the bit position in the PMC_ER/DR/SR registers.
-	You can use the dt macros defined in dt-bindings/clk/at91.h.
+	You can use the dt macros defined in dt-bindings/clock/at91.h.
 	0 (AT91_PMC_MOSCS) -> main oscillator ready
 	1 (AT91_PMC_LOCKA) -> PLL A ready
 	2 (AT91_PMC_LOCKB) -> PLL B ready