diff options
| author | Marius Zachmann <mail@mariuszachmann.de> | 2020-06-26 07:59:36 +0200 |
|---|---|---|
| committer | Guenter Roeck <linux@roeck-us.net> | 2020-07-24 07:44:57 -0700 |
| commit | 40c3a445422579db8ad96c234dbe6c0ab3f6b936 (patch) | |
| tree | 55f9134f1e47298c92f678df8c36d84b1bb72939 /Documentation/hwmon/corsair-cpro.rst | |
| parent | a686024e18bdce5724468c7f1703c35de299dd80 (diff) | |
hwmon: add Corsair Commander Pro driver
This is v7 of a driver for the Corsair Commander Pro.
It provides sysfs attributes for:
- Reading fan speed
- Reading temp sensors
- Reading voltage values
- Writing pwm and reading last written pwm
- Reading fan and temp connection status
It is an usb driver, so it needs to be ignored by usbhid.
The Corsair Commander Pro is a fan controller and provides
no means for user interaction.
The two device numbers are there, because there is a slightly
different version of the same device. (Only difference
seem to be in some presets.)
Squashed:
hwmon: (corsair-cpro) add fan_target
This adds fan_target entries to the corsair-cpro driver.
Reading the attribute from the device does not seem possible, so
it returns the last set value (same as pwm).
send_usb_cmd now has one more argument, which is needed for the
fan_target command.
hwmon: corsair-cpro: Change to HID driver
This changes corsair-cpro to a hid driver using hid reports.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de
Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de
[groeck: Squashed follow-up patches to avoid changes in HID code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'Documentation/hwmon/corsair-cpro.rst')
| -rw-r--r-- | Documentation/hwmon/corsair-cpro.rst | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst new file mode 100644 index 000000000000..78820156f07d --- /dev/null +++ b/Documentation/hwmon/corsair-cpro.rst @@ -0,0 +1,42 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver corsair-cpro +========================== + +Supported devices: + + * Corsair Commander Pro + * Corsair Commander Pro (1000D) + +Author: Marius Zachmann + +Description +----------- + +This driver implements the sysfs interface for the Corsair Commander Pro. +The Corsair Commander Pro is a USB device with 6 fan connectors, +4 temperature sensor connectors and 2 Corsair LED connectors. +It can read the voltage levels on the SATA power connector. + +Usage Notes +----------- + +Since it is a USB device, hotswapping is possible. The device is autodetected. + +Sysfs entries +------------- + +======================= ===================================================================== +in0_input Voltage on SATA 12v +in1_input Voltage on SATA 5v +in2_input Voltage on SATA 3.3v +temp[1-4]_input Temperature on connected temperature sensors +fan[1-6]_input Connected fan rpm. +fan[1-6]_label Shows fan type as detected by the device. +fan[1-6]_target Sets fan speed target rpm. + When reading, it reports the last value if it was set by the driver. + Otherwise returns 0. +pwm[1-6] Sets the fan speed. Values from 0-255. + When reading, it reports the last value if it was set by the driver. + Otherwise returns 0. +======================= ===================================================================== |