Documentation: remove references to /etc/modprobe.conf

Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 11 insertions, 11 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 6f75ba3b8a39..8c16d50f6cb6 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -2044,7 +2044,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Install the necessary firmware files in alsa-firmware package.
     When no hotplug fw loader is available, you need to load the
     firmware via vxloader utility in alsa-tools package.  To invoke
-    vxloader automatically, add the following to /etc/modprobe.conf
+    vxloader automatically, add the following to /etc/modprobe.d/alsa.conf
 
 	install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader
 
@@ -2168,10 +2168,10 @@ corresponds to the card index of ALSA.  Usually, define this
 as the same card module.
 
 An example configuration for a single emu10k1 card is like below:
------ /etc/modprobe.conf
+----- /etc/modprobe.d/alsa.conf
 alias snd-card-0 snd-emu10k1
 alias sound-slot-0 snd-emu10k1
------ /etc/modprobe.conf
+----- /etc/modprobe.d/alsa.conf
 
 The available number of auto-loaded sound cards depends on the module
 option "cards_limit" of snd module.  As default it's set to 1.
@@ -2184,7 +2184,7 @@ cards is kept consistent.
 
 An example configuration for two sound cards is like below:
 
------ /etc/modprobe.conf
+----- /etc/modprobe.d/alsa.conf
 # ALSA portion
 options snd cards_limit=2
 alias snd-card-0 snd-interwave
@@ -2194,7 +2194,7 @@ options snd-ens1371 index=1
 # OSS/Free portion
 alias sound-slot-0 snd-interwave
 alias sound-slot-1 snd-ens1371
------ /etc/modprobe.conf
+----- /etc/modprobe.d/alsa.conf
 
 In this example, the interwave card is always loaded as the first card
 (index 0) and ens1371 as the second (index 1).
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index a4c53d8961e1..654dd3b694a8 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -232,7 +232,7 @@ The parameter can be given:
    # modprobe snd-usb-audio index=1 device_setup=0x09
 
  * Or while configuring the modules options in your modules configuration file
-   - For Fedora distributions, edit the /etc/modprobe.conf file:
+   (tipically a .conf file in /etc/modprobe.d/ directory:
        alias snd-card-1 snd-usb-audio
        options snd-usb-audio index=1 device_setup=0x09
 
@@ -253,7 +253,7 @@ CAUTION when initializing the device
    - first turn off the device
    - de-register the snd-usb-audio module (modprobe -r)
    - change the device_setup parameter by changing the device_setup
-     option in /etc/modprobe.conf 
+     option in /etc/modprobe.d/*.conf
    - turn on the device
  * A workaround for this last issue has been applied to kernel 2.6.23, but it may not
    be enough to ensure the 'stability' of the device initialization.
diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt
index ef42c44fa1f2..4ee35b4fbe4a 100644
--- a/Documentation/sound/alsa/MIXART.txt
+++ b/Documentation/sound/alsa/MIXART.txt
@@ -76,9 +76,9 @@ FIRMWARE
  when CONFIG_FW_LOADER is set.  The mixartloader is necessary only
  for older versions or when you build the driver into kernel.]
  
-For loading the firmware automatically after the module is loaded, use
-the post-install command.  For example, add the following entry to
-/etc/modprobe.conf for miXart driver:
+For loading the firmware automatically after the module is loaded, use a
+install command.  For example, add the following entry to
+/etc/modprobe.d/mixart.conf for miXart driver:
 
 	install snd-mixart /sbin/modprobe --first-time -i snd-mixart && \
 			   /usr/bin/mixartloader
diff --git a/Documentation/sound/alsa/OSS-Emulation.txt b/Documentation/sound/alsa/OSS-Emulation.txt
index 022aaeb0e9dd..152ca2a3f1bd 100644
--- a/Documentation/sound/alsa/OSS-Emulation.txt
+++ b/Documentation/sound/alsa/OSS-Emulation.txt
@@ -19,7 +19,7 @@ the card number and the minor unit number.  Usually you don't have to
 define these aliases by yourself.
 
 Only necessary step for auto-loading of OSS modules is to define the
-card alias in /etc/modprobe.conf, such as
+card alias in /etc/modprobe.d/alsa.conf, such as
 
 	alias sound-slot-0 snd-emu10k1