summaryrefslogtreecommitdiff
path: root/Documentation/x86
diff options
context:
space:
mode:
authorH. Peter Anvin <hpa@linux.intel.com>2013-02-15 09:25:08 -0800
committerH. Peter Anvin <hpa@linux.intel.com>2013-02-15 09:25:08 -0800
commit0da3e7f526fde7a6522a3038b7ce609fc50f6707 (patch)
treec6e2dacd96fe7eac8312f3d7c22e0995dc423879 /Documentation/x86
parent95c9608478d639dcffc14ea47b31bff021a99ed1 (diff)
parent68d00bbebb5a48b7a9056a8c03476a71ecbc30a6 (diff)
Merge branch 'x86/mm2' into x86/mm
x86/mm2 is testing out fine, but has developed conflicts with x86/mm due to patches in adjacent code. Merge them so we can drop x86/mm2 and have a unified branch. Resolved Conflicts: arch/x86/kernel/setup.c
Diffstat (limited to 'Documentation/x86')
-rw-r--r--Documentation/x86/boot.txt65
-rw-r--r--Documentation/x86/zero-page.txt4
2 files changed, 68 insertions, 1 deletions
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 406d82d5d2bb..0e383169839a 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -57,6 +57,10 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover
protocol entry point.
+Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields
+ to struct boot_params for for loading bzImage and ramdisk
+ above 4G in 64bit.
+
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset Proto Name Meaning
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/1 2.10+ min_alignment Minimum alignment, as a power of two
-0236/2 N/A pad3 Unused
+0236/2 2.12+ xloadflags Boot protocol option flags
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol: 2.10+
misaligned kernel. Therefore, a loader should typically try each
power-of-two alignment from kernel_alignment down to this alignment.
+Field name: xloadflags
+Type: read
+Offset/size: 0x236/2
+Protocol: 2.12+
+
+ This field is a bitmask.
+
+ Bit 0 (read): XLF_KERNEL_64
+ - If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+ Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+ - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+ Bit 2 (read): XLF_EFI_HANDOVER_32
+ - If 1, the kernel supports the 32-bit EFI handoff entry point
+ given at handover_offset.
+
+ Bit 3 (read): XLF_EFI_HANDOVER_64
+ - If 1, the kernel supports the 64-bit EFI handoff entry point
+ given at handover_offset + 0x200.
+
Field name: cmdline_size
Type: read
Offset/size: 0x238/4
@@ -1029,6 +1054,44 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
address of the struct boot_params; %ebp, %edi and %ebx must be zero.
+**** 64-bit BOOT PROTOCOL
+
+For machine with 64bit cpus and 64bit kernel, we could use 64bit bootloader
+and we need a 64-bit boot protocol.
+
+In 64-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+could be allocated anywhere (even above 4G) and initialized to all zero.
+Then, the setup header at offset 0x01f1 of kernel image on should be
+loaded into struct boot_params and examined. The end of setup header
+can be calculated as follows:
+
+ 0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as described
+in zero-page.txt.
+
+After setting up the struct boot_params, the boot loader can load
+64-bit kernel in the same way as that of 16-bit boot protocol, but
+kernel could be loaded above 4G.
+
+In 64-bit boot protocol, the kernel is started by jumping to the
+64-bit kernel entry point, which is the start address of loaded
+64-bit kernel plus 0x200.
+
+At entry, the CPU must be in 64-bit mode with paging enabled.
+The range with setup_header.init_size from start address of loaded
+kernel and zero page and command line buffer get ident mapping;
+a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOT_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
+address of the struct boot_params.
+
**** EFI HANDOVER PROTOCOL
This protocol allows boot loaders to defer initialisation to the EFI
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index cf5437deda81..199f453cb4de 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -19,6 +19,9 @@ Offset Proto Name Meaning
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
+0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits
+0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits
+0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits
140/080 ALL edid_info Video mode setup (struct edid_info)
1C0/020 ALL efi_info EFI 32 information (struct efi_info)
1E0/004 ALL alk_mem_k Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset Proto Name Meaning
1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
(below)
+1EF/001 ALL sentinel Used to detect broken bootloaders
290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
2D0/A00 ALL e820_map E820 memory map table
(array of struct e820entry)