summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@s-opensource.com>2016-07-23 07:59:19 -0300
committerMauro Carvalho Chehab <mchehab@s-opensource.com>2016-07-23 07:59:19 -0300
commitc278256d05a2fc75b427fa6a5dc0024faa93465d (patch)
tree2c09c6c65a4b6c597a568ec2425adb75eff7d5d5 /Documentation
parent7e5b7d1b3a8facd4dc1ddb5d9ec53c0687d13de7 (diff)
parent009a620848218d521f008141c62f56bf19294dd9 (diff)
Merge branch 'patchwork' into topic/docs-next
* patchwork: (1492 commits) [media] cec: always check all_device_types and features [media] cec: poll should check if there is room in the tx queue [media] vivid: support monitor all mode [media] cec: fix test for unconfigured adapter in main message loop [media] cec: limit the size of the transmit queue [media] cec: zero unused msg part after msg->len [media] cec: don't set fh to NULL in CEC_TRANSMIT [media] cec: clear all status fields before transmit and always fill in sequence [media] cec: CEC_RECEIVE overwrote the timeout field [media] cxd2841er: Reading SNR for DVB-C added [media] cxd2841er: Reading BER and UCB for DVB-C added [media] cxd2841er: fix switch-case for DVB-C [media] cxd2841er: fix signal strength scale for ISDB-T [media] cxd2841er: adjust the dB scale for DVB-C [media] cxd2841er: provide signal strength for DVB-C [media] cxd2841er: fix BER report via DVBv5 stats API [media] mb86a20s: apply mask to val after checking for read failure [media] airspy: fix error logic during device register [media] s5p-cec/TODO: add TODO item [media] cec/TODO: drop comment about sphinx documentation ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/configfs-usb-gadget-uvc58
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-proximity-as39352
-rw-r--r--Documentation/DocBook/device-drivers.tmpl36
-rw-r--r--Documentation/DocBook/media/v4l/io.xml4
-rw-r--r--Documentation/DocBook/media/v4l/lirc_device_interface.xml2
-rw-r--r--Documentation/DocBook/media/v4l/media-types.xml64
-rw-r--r--Documentation/DocBook/media/v4l/pixfmt-z16.xml2
-rw-r--r--Documentation/DocBook/media/v4l/vidioc-reqbufs.xml2
-rw-r--r--Documentation/arm64/silicon-errata.txt1
-rw-r--r--Documentation/devicetree/bindings/display/imx/ldb.txt1
-rw-r--r--Documentation/devicetree/bindings/hwmon/ina2xx.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt6
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt6
-rw-r--r--Documentation/devicetree/bindings/media/mediatek-vcodec.txt59
-rw-r--r--Documentation/devicetree/bindings/media/renesas,fcp.txt32
-rw-r--r--Documentation/devicetree/bindings/media/renesas,vsp1.txt5
-rw-r--r--Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt8
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/filesystems/devpts.txt145
-rw-r--r--Documentation/kdump/gdbmacros.txt93
-rw-r--r--Documentation/leds/leds-class.txt4
-rw-r--r--Documentation/media/kapi/v4l2-controls.rst17
-rw-r--r--Documentation/networking/dsa/dsa.txt17
-rw-r--r--Documentation/networking/ip-sysctl.txt8
-rw-r--r--Documentation/scsi/scsi_eh.txt8
-rw-r--r--Documentation/security/keys.txt5
29 files changed, 372 insertions, 227 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 2f4a0051b32d..1ba0d0fda9c0 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -1,6 +1,6 @@
What: /config/usb-gadget/gadget/functions/uvc.name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: UVC function directory
streaming_maxburst - 0..15 (ss only)
@@ -9,37 +9,37 @@ Description: UVC function directory
What: /config/usb-gadget/gadget/functions/uvc.name/control
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Control descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class/ss
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Super speed control class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/class/fs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Full speed control class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Output terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/output/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default output terminal descriptors
All attributes read only:
@@ -53,12 +53,12 @@ Description: Default output terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Camera terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/terminal/camera/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default camera terminal descriptors
All attributes read only:
@@ -75,12 +75,12 @@ Description: Default camera terminal descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/processing
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Processing unit descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/processing/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default processing unit descriptors
All attributes read only:
@@ -94,49 +94,49 @@ Description: Default processing unit descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/header
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Control header descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/control/header/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific control header descriptors
dwClockFrequency
bcdUVC
What: /config/usb-gadget/gadget/functions/uvc.name/streaming
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/ss
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Super speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/hs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: High speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/class/fs
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Full speed streaming class descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Color matching descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/default
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Default color matching descriptors
All attributes read only:
@@ -150,12 +150,12 @@ Description: Default color matching descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: MJPEG format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific MJPEG format descriptors
All attributes read only,
@@ -174,7 +174,7 @@ Description: Specific MJPEG format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/mjpeg/name/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific MJPEG frame descriptors
dwFrameInterval - indicates how frame interval can be
@@ -196,12 +196,12 @@ Description: Specific MJPEG frame descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Uncompressed format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific uncompressed format descriptors
bmaControls - this format's data for bmaControls in
@@ -221,7 +221,7 @@ Description: Specific uncompressed format descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/uncompressed/name/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific uncompressed frame descriptors
dwFrameInterval - indicates how frame interval can be
@@ -243,12 +243,12 @@ Description: Specific uncompressed frame descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Streaming header descriptors
What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header/name
Date: Dec 2014
-KernelVersion: 3.20
+KernelVersion: 4.0
Description: Specific streaming header descriptors
All attributes read only:
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 6708c5e264aa..33e96f740639 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -1,4 +1,4 @@
-What /sys/bus/iio/devices/iio:deviceX/in_proximity_raw
+What /sys/bus/iio/devices/iio:deviceX/in_proximity_input
Date: March 2014
KernelVersion: 3.15
Contact: Matt Ranostay <mranostay@gmail.com>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index e9f77f2fe27b..7febdeb08159 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -128,16 +128,44 @@ X!Edrivers/base/interface.c
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
- <sect1><title>Device Drivers DMA Management</title>
+ <sect1>
+ <title>Buffer Sharing and Synchronization</title>
+ <para>
+ The dma-buf subsystem provides the framework for sharing buffers
+ for hardware (DMA) access across multiple device drivers and
+ subsystems, and for synchronizing asynchronous hardware access.
+ </para>
+ <para>
+ This is used, for example, by drm "prime" multi-GPU support, but
+ is of course not limited to GPU use cases.
+ </para>
+ <para>
+ The three main components of this are: (1) dma-buf, representing
+ a sg_table and exposed to userspace as a file descriptor to allow
+ passing between devices, (2) fence, which provides a mechanism
+ to signal when one device as finished access, and (3) reservation,
+ which manages the shared or exclusive fence(s) associated with
+ the buffer.
+ </para>
+ <sect2><title>dma-buf</title>
!Edrivers/dma-buf/dma-buf.c
+!Iinclude/linux/dma-buf.h
+ </sect2>
+ <sect2><title>reservation</title>
+!Pdrivers/dma-buf/reservation.c Reservation Object Overview
+!Edrivers/dma-buf/reservation.c
+!Iinclude/linux/reservation.h
+ </sect2>
+ <sect2><title>fence</title>
!Edrivers/dma-buf/fence.c
-!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/fence.h
+!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
!Edrivers/dma-buf/sync_file.c
!Iinclude/linux/sync_file.h
+ </sect2>
+ </sect1>
+ <sect1><title>Device Drivers DMA Management</title>
!Edrivers/base/dma-coherent.c
!Edrivers/base/dma-mapping.c
</sect1>
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index e09025db92bd..21a3dde8f95d 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -88,7 +88,7 @@ function.<footnote>
<structfield>capabilities</structfield> field of &v4l2-capability;
returned by the &VIDIOC-QUERYCAP; ioctl is set. There are two
streaming methods, to determine if the memory mapping flavor is
-supported applications must call the &VIDIOC-REQBUFS; ioctl.</para>
+supported applications must call the &VIDIOC-REQBUFS; ioctl with the memory type set to <constant>V4L2_MEMORY_MMAP</constant>.</para>
<para>Streaming is an I/O method where only pointers to buffers
are exchanged between application and driver, the data itself is not
@@ -369,7 +369,7 @@ rest should be evident.</para>
<structfield>capabilities</structfield> field of &v4l2-capability;
returned by the &VIDIOC-QUERYCAP; ioctl is set. If the particular user
pointer method (not only memory mapping) is supported must be
-determined by calling the &VIDIOC-REQBUFS; ioctl.</para>
+determined by calling the &VIDIOC-REQBUFS; ioctl with the memory type set to <constant>V4L2_MEMORY_USERPTR</constant>.</para>
<para>This I/O method combines advantages of the read/write and
memory mapping methods. Buffers (planes) are allocated by the application
diff --git a/Documentation/DocBook/media/v4l/lirc_device_interface.xml b/Documentation/DocBook/media/v4l/lirc_device_interface.xml
index 725b221e1f6c..f53ad58027a7 100644
--- a/Documentation/DocBook/media/v4l/lirc_device_interface.xml
+++ b/Documentation/DocBook/media/v4l/lirc_device_interface.xml
@@ -157,7 +157,7 @@ on working with the default settings initially.</para>
<varlistentry>
<term>LIRC_SET_{SEND,REC}_CARRIER</term>
<listitem>
- <para>Set send/receive carrier (in Hz).</para>
+ <para>Set send/receive carrier (in Hz). Return 0 on success.</para>
</listitem>
</varlistentry>
<varlistentry>
diff --git a/Documentation/DocBook/media/v4l/media-types.xml b/Documentation/DocBook/media/v4l/media-types.xml
index 5e3f20fdcf17..95aa1f9c836a 100644
--- a/Documentation/DocBook/media/v4l/media-types.xml
+++ b/Documentation/DocBook/media/v4l/media-types.xml
@@ -121,6 +121,70 @@
<entry><constant>MEDIA_ENT_F_AUDIO_MIXER</constant></entry>
<entry>Audio Mixer Function Entity.</entry>
</row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_COMPOSER</constant></entry>
+ <entry>Video composer (blender). An entity capable of video
+ composing must have at least two sink pads and one source
+ pad, and composes input video frames onto output video
+ frames. Composition can be performed using alpha blending,
+ color keying, raster operations (ROP), stitching or any other
+ means.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER</constant></entry>
+ <entry>Video pixel formatter. An entity capable of pixel formatting
+ must have at least one sink pad and one source pad. Read
+ pixel formatters read pixels from memory and perform a subset
+ of unpacking, cropping, color keying, alpha multiplication
+ and pixel encoding conversion. Write pixel formatters perform
+ a subset of dithering, pixel encoding conversion and packing
+ and write pixels to memory.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV</constant></entry>
+ <entry>Video pixel encoding converter. An entity capable of pixel
+ enconding conversion must have at least one sink pad and one
+ source pad, and convert the encoding of pixels received on
+ its sink pad(s) to a different encoding output on its source
+ pad(s). Pixel encoding conversion includes but isn't limited
+ to RGB to/from HSV, RGB to/from YUV and CFA (Bayer) to RGB
+ conversions.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_LUT</constant></entry>
+ <entry>Video look-up table. An entity capable of video lookup table
+ processing must have one sink pad and one source pad. It uses
+ the values of the pixels received on its sink pad to look up
+ entries in internal tables and output them on its source pad.
+ The lookup processing can be performed on all components
+ separately or combine them for multi-dimensional table
+ lookups.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_SCALER</constant></entry>
+ <entry>Video scaler. An entity capable of video scaling must have
+ at least one sink pad and one source pad, and scale the
+ video frame(s) received on its sink pad(s) to a different
+ resolution output on its source pad(s). The range of
+ supported scaling ratios is entity-specific and can differ
+ between the horizontal and vertical directions (in particular
+ scaling can be supported in one direction only). Binning and
+ skipping are considered as scaling.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_PROC_VIDEO_STATISTICS</constant></entry>
+ <entry>Video statistics computation (histogram, 3A, ...). An entity
+ capable of statistics computation must have one sink pad and
+ one source pad. It computes statistics over the frames
+ received on its sink pad and outputs the statistics data on
+ its source pad.
+ </entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/media/v4l/pixfmt-z16.xml b/Documentation/DocBook/media/v4l/pixfmt-z16.xml
index 3d87e4bf87b8..1d9cb1684bd3 100644
--- a/Documentation/DocBook/media/v4l/pixfmt-z16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-z16.xml
@@ -5,7 +5,7 @@
</refmeta>
<refnamediv>
<refname><constant>V4L2_PIX_FMT_Z16</constant></refname>
- <refpurpose>Interleaved grey-scale image, e.g. from a stereo-pair</refpurpose>
+ <refpurpose>16-bit depth data with distance values at each pixel</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
index 0f193fda0470..6f529e100ea4 100644
--- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
@@ -6,7 +6,7 @@
<refnamediv>
<refname>VIDIOC_REQBUFS</refname>
- <refpurpose>Initiate Memory Mapping or User Pointer I/O</refpurpose>
+ <refpurpose>Initiate Memory Mapping, User Pointer or DMA Buffer I/O</refpurpose>
</refnamediv>
<refsynopsisdiv>
diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt
index c6938e50e71f..4da60b463995 100644
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -56,6 +56,7 @@ stable kernels.
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
+| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
| Cavium | ThunderX SMMUv2 | #27704 | N/A |
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 0a175d991b52..a407462c885e 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -62,6 +62,7 @@ Required properties:
display-timings are used instead.
Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- display-timings : A node that describes the display timings as defined in
Documentation/devicetree/bindings/display/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
index 9bcd5e87830d..02af0d94e921 100644
--- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
+++ b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
@@ -7,6 +7,7 @@ Required properties:
- "ti,ina220" for ina220
- "ti,ina226" for ina226
- "ti,ina230" for ina230
+ - "ti,ina231" for ina231
- reg: I2C address
Optional properties:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
index bfeabb843941..71191ff0e781 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
@@ -44,8 +44,8 @@ Required properties:
- our-claim-gpio: The GPIO that we use to claim the bus.
- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
Note that some implementations may only support a single other master.
-- Standard I2C mux properties. See mux.txt in this directory.
-- Single I2C child bus node at reg 0. See mux.txt in this directory.
+- Standard I2C mux properties. See i2c-mux.txt in this directory.
+- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory.
Optional properties:
- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
index 6078aefe7ed4..7ce23ac61308 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
@@ -27,7 +27,8 @@ Required properties:
- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
parents.
-Furthermore, I2C mux properties and child nodes. See mux.txt in this directory.
+Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+directory.
Example:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
index 66709a825541..21da3ecbb370 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
@@ -22,8 +22,8 @@ Required properties:
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
Optional properties:
- idle-state: value to set the muxer to when idle. When no value is
@@ -33,7 +33,7 @@ For each i2c child node, an I2C child bus will be created. They will
be numbered based on their order in the device tree.
Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output using the list of
+in the relevant node's reg property will be output using the list of
GPIOs, the first in the list holding the least-significant value.
If an idle state is defined, using the idle-state (optional) property,
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
index ae8af1694e95..33119a98e144 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
@@ -28,9 +28,9 @@ Also required are:
* Standard pinctrl properties that specify the pin mux state for each child
bus. See ../pinctrl/pinctrl-bindings.txt.
-* Standard I2C mux properties. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
For each named state defined in the pinctrl-names property, an I2C child bus
will be created. I2C child bus numbers are assigned based on the index into
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
index 688783fbe696..de00d7fc450b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
@@ -7,8 +7,8 @@ Required properties:
- compatible: i2c-mux-reg
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
Optional properties:
- reg: this pair of <offset size> specifies the register to control the mux.
@@ -24,7 +24,7 @@ Optional properties:
given, it defaults to the last value used.
Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output to the register.
+in the relevant node's reg property will be output to the register.
If an idle state is defined, using the idle-state (optional) property,
whenever an access is not being made to a device on a child bus, the
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
new file mode 100644
index 000000000000..59a47a5b924b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -0,0 +1,59 @@
+Mediatek Video Codec
+
+Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
+supports high resolution encoding functionalities.
+
+Required properties:
+- compatible : "mediatek,mt8173-vcodec-enc" for encoder
+- reg : Physical base address of the video codec registers and length of
+ memory mapped region.
+- interrupts : interrupt number to the cpu.
+- mediatek,larb : must contain the local arbiters in the current Socs.
+- clocks : list of clock specifiers, corresponding to entries in
+ the clock-names property.
+- clock-names: encoder must contain "venc_sel_src", "venc_sel",
+- "venc_lt_sel_src", "venc_lt_sel".
+- iommus : should point to the respective IOMMU block with master port as
+ argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+ for details.
+- mediatek,vpu : the node of video processor unit
+
+Example:
+vcodec_enc: vcodec@0x18002000 {
+ compatible = "mediatek,mt8173-vcodec-enc";
+ reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/
+ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,larb = <&larb3>,
+ <&larb5>;
+ iommus = <&iommu M4U_PORT_VENC_RCPU>,
+ <&iommu M4U_PORT_VENC_REC>,
+ <&iommu M4U_PORT_VENC_BSDMA>,
+ <&iommu M4U_PORT_VENC_SV_COMV>,
+ <&iommu M4U_PORT_VENC_RD_COMV>,
+ <&iommu M4U_PORT_VENC_CUR_LUMA>,
+ <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+ <&iommu M4U_PORT_VENC_REF_LUMA>,
+ <&iommu M4U_PORT_VENC_REF_CHROMA>,
+ <&iommu M4U_PORT_VENC_NBM_RDMA>,
+ <&iommu M4U_PORT_VENC_NBM_WDMA>,
+ <&iommu M4U_PORT_VENC_RCPU_SET2>,
+ <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+ <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+ <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+ <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+ <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+ <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+ <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+ <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+ mediatek,vpu = <&vpu>;
+ clocks = <&topckgen CLK_TOP_VENCPLL_D2>,
+ <&topckgen CLK_TOP_VENC_SEL>,
+ <&topckgen CLK_TOP_UNIVPLL1_D2>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "venc_sel_src",
+ "venc_sel",
+ "venc_lt_sel_src",
+ "venc_lt_sel";
+ };
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt
new file mode 100644
index 000000000000..6a12960609d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.txt
@@ -0,0 +1,32 @@
+Renesas R-Car Frame Compression Processor (FCP)
+-----------------------------------------------
+
+The FCP is a companion module of video processing modules in the Renesas R-Car
+Gen3 SoCs. It provides data compression and decompression, data caching, and
+conversion of AXI transactions in order to reduce the memory bandwidth.
+
+There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP
+for FDP (FCPF). Their configuration and behaviour depend on the module they
+are paired with. These DT bindings currently support the FCPV only.
+
+ - compatible: Must be one or more of the following
+
+ - "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP'
+ - "renesas,fcpv" for generic compatible 'FCP for VSP'
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first, followed by the
+ family-specific and/or generic versions.
+
+ - reg: the register base and size for the device registers
+ - clocks: Reference to the functional clock
+
+
+Device node example
+-------------------
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ };
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
index 627405abd144..9b695bcbf219 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -14,6 +14,11 @@ Required properties:
- interrupts: VSP interrupt specifier.
- clocks: A phandle + clock-specifier pair for the VSP functional clock.
+Optional properties:
+
+ - renesas,fcp: A phandle referencing the FCP that handles memory accesses
+ for the VSP. Not needed on Gen2, mandatory on Gen3.
+
Example: R8A7790 (R-Car H2) VSP1-S node
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
index 14aa6cf58201..6a9a63cb0543 100644
--- a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
+++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
@@ -13,10 +13,10 @@ Optional properties:
initialization. This is an array of 28 values(u8).
- marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
- firmware will use the pin to wakeup host system.
+ firmware will use the pin to wakeup host system (u16).
- marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
platform. The value will be configured to firmware. This
- is needed to work chip's sleep feature as expected.
+ is needed to work chip's sleep feature as expected (u16).
- interrupt-parent: phandle of the parent interrupt controller
- interrupts : interrupt pin number to the cpu. Driver will request an irq based
on this interrupt number. During system suspend, the irq will be
@@ -50,7 +50,7 @@ calibration data is also available in below example.
0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0xf0 0x00>;
- marvell,wakeup-pin = <0x0d>;
- marvell,wakeup-gap-ms = <0x64>;
+ marvell,wakeup-pin = /bits/ 16 <0x0d>;
+ marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
};
};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a7440bcd67ff..2c2500df0dce 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -255,6 +255,7 @@ synology Synology, Inc.
SUNW Sun Microsystems, Inc
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technexion TechNexion
technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
@@ -269,6 +270,7 @@ tronsmart Tronsmart
truly Truly Semiconductors Limited
tyan Tyan Computer Corporation
upisemi uPI Semiconductor Corp.
+uniwest United Western Technologies Corp (UniWest)
urt United Radiant Technology Corporation
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
diff --git a/Documentation/filesystems/devpts.txt b/Documentation/filesystems/devpts.txt
index 30d2fcb32f72..9f94fe276dea 100644
--- a/Documentation/filesystems/devpts.txt
+++ b/Documentation/filesystems/devpts.txt
@@ -1,141 +1,26 @@
+Each mount of the devpts filesystem is now distinct such that ptys
+and their indicies allocated in one mount are independent from ptys
+and their indicies in all other mounts.
-To support containers, we now allow multiple instances of devpts filesystem,
-such that indices of ptys allocated in one instance are independent of indices
-allocated in other instances of devpts.
+All mounts of the devpts filesystem now create a /dev/pts/ptmx node
+with permissions 0000.
-To preserve backward compatibility, this support for multiple instances is
-enabled only if:
+To retain backwards compatibility the a ptmx device node (aka any node
+created with "mknod name c 5 2") when opened will look for an instance
+of devpts under the name "pts" in the same directory as the ptmx device
+node.
- - CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and
- - '-o newinstance' mount option is specified while mounting devpts
-
-IOW, devpts now supports both single-instance and multi-instance semantics.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and
-this referred to as the "legacy" mode. In this mode, the new mount options
-(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message
-on console.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the
-'newinstance' option (as in current start-up scripts) the new mount binds
-to the initial kernel mount of devpts. This mode is referred to as the
-'single-instance' mode and the current, single-instance semantics are
-preserved, i.e PTYs are common across the system.
-
-The only difference between this single-instance mode and the legacy mode
-is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which
-can safely be ignored.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified,
-the mount is considered to be in the multi-instance mode and a new instance
-of the devpts fs is created. Any ptys created in this instance are independent
-of ptys in other instances of devpts. Like in the single-instance mode, the
-/dev/pts/ptmx node is present. To effectively use the multi-instance mode,
-open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or
-bind-mount.
-
-Eg: A container startup script could do the following:
-
- $ chmod 0666 /dev/pts/ptmx
- $ rm /dev/ptmx
- $ ln -s pts/ptmx /dev/ptmx
- $ ns_exec -cm /bin/bash
-
- # We are now in new container
-
- $ umount /dev/pts
- $ mount -t devpts -o newinstance lxcpts /dev/pts
- $ sshd -p 1234
-
-where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
-/bin/bash in the child process. A pty created by the sshd is not visible in
-the original mount of /dev/pts.
+As an option instead of placing a /dev/ptmx device node at /dev/ptmx
+it is possible to place a symlink to /dev/pts/ptmx at /dev/ptmx or
+to bind mount /dev/ptx/ptmx to /dev/ptmx. If you opt for using
+the devpts filesystem in this manner devpts should be mounted with
+the ptmxmode=0666, or chmod 0666 /dev/pts/ptmx should be called.
Total count of pty pairs in all instances is limited by sysctls:
kernel.pty.max = 4096 - global limit
-kernel.pty.reserve = 1024 - reserve for initial instance
+kernel.pty.reserve = 1024 - reserved for filesystems mounted from the initial mount namespace
kernel.pty.nr - current count of ptys
Per-instance limit could be set by adding mount option "max=<count>".
This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
-
-User-space changes
-------------------
-
-In multi-instance mode (i.e '-o newinstance' mount option is specified at least
-once), following user-space issues should be noted.
-
-1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored
- and no change is needed to system-startup scripts.
-
-2. To effectively use multi-instance mode (i.e -o newinstance is specified)
- administrators or startup scripts should "redirect" open of /dev/ptmx to
- /dev/pts/ptmx using either a bind mount or symlink.
-
- $ mount -t devpts -o newinstance devpts /dev/pts
-
- followed by either
-
- $ rm /dev/ptmx
- $ ln -s pts/ptmx /dev/ptmx
- $ chmod 666 /dev/pts/ptmx
- or
- $ mount -o bind /dev/pts/ptmx /dev/ptmx
-
-3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it
- enables better error-reporting and treats both single-instance and
- multi-instance mounts similarly.
-
- But this method requires that system-startup scripts set the mode of
- /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the
- mode by, either
-
- - adding ptmxmode mount option to devpts entry in /etc/fstab, or
- - using 'chmod 0666 /dev/pts/ptmx'
-
-4. If multi-instance mode mount is needed for containers, but the system
- startup scripts have not yet been updated, container-startup scripts
- should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single-
- instance mounts.
-
- Or, in general, container-startup scripts should use:
-
- mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts
- if [ ! -L /dev/ptmx ]; then
- mount -o bind /dev/pts/ptmx /dev/ptmx
- fi
-
- When all devpts mounts are multi-instance, /dev/ptmx can permanently be
- a symlink to pts/ptmx and the bind mount can be ignored.
-
-5. A multi-instance mount that is not accompanied by the /dev/ptmx to
- /dev/pts/ptmx redirection would result in an unusable/unreachable pty.
-
- mount -t devpts -o newinstance lxcpts /dev/pts
-
- immediately followed by:
-
- open("/dev/ptmx")
-
- would create a pty, say /dev/pts/7, in the initial kernel mount.
- But /dev/pts/7 would be invisible in the new mount.
-
-6. The permissions for /dev/pts/ptmx node should be specified when mounting
- /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000).
-
- mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts
-
- The permissions can be later be changed as usual with 'chmod'.
-
- chmod 666 /dev/pts/ptmx
-
-7. A mount of devpts without the 'newinstance' option results in binding to
- initial kernel mount. This behavior while preserving legacy semantics,
- does not provide strict isolation in a container environment. i.e by
- mounting devpts without the 'newinstance' option, a container could
- get visibility into the 'host' or root container's devpts.
-
- To workaround this and have strict isolation, all mounts of devpts,
- including the mount in the root container, should use the newinstance
- option.
diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt
index 35f6a982a0d5..220d0a80ca2c 100644
--- a/Documentation/kdump/gdbmacros.txt
+++ b/Documentation/kdump/gdbmacros.txt
@@ -170,21 +170,92 @@ document trapinfo
address the kernel panicked.
end
+define dump_log_idx
+ set $idx = $arg0
+ if ($argc > 1)
+ set $prev_flags = $arg1
+ else
+ set $prev_flags = 0
+ end
+ set $msg = ((struct printk_log *) (log_buf + $idx))
+ set $prefix = 1
+ set $newline = 1
+ set $log = log_buf + $idx + sizeof(*$msg)
-define dmesg
- set $i = 0
- set $end_idx = (log_end - 1) & (log_buf_len - 1)
+ # prev & LOG_CONT && !(msg->flags & LOG_PREIX)
+ if (($prev_flags & 8) && !($msg->flags & 4))
+ set $prefix = 0
+ end
+
+ # msg->flags & LOG_CONT
+ if ($msg->flags & 8)
+ # (prev & LOG_CONT && !(prev & LOG_NEWLINE))
+ if (($prev_flags & 8) && !($prev_flags & 2))
+ set $prefix = 0
+ end
+ # (!(msg->flags & LOG_NEWLINE))
+ if (!($msg->flags & 2))
+ set $newline = 0
+ end
+ end
+
+ if ($prefix)
+ printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+ end
+ if ($msg->text_len != 0)
+ eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+ end
+ if ($newline)
+ printf "\n"
+ end
+ if ($msg->dict_len > 0)
+ set $dict = $log + $msg->text_len
+ set $idx = 0
+ set $line = 1
+ while ($idx < $msg->dict_len)
+ if ($line)
+ printf " "
+ set $line = 0
+ end
+ set $c = $dict[$idx]
+ if ($c == '\0')
+ printf "\n"
+ set $line = 1
+ else
+ if ($c < ' ' || $c >= 127 || $c == '\\')
+ printf "\\x%02x", $c
+ else
+ printf "%c", $c
+ end
+ end
+ set $idx = $idx + 1
+ end
+ printf "\n"
+ end
+end
+document dump_log_idx
+ Dump a single log given its index in the log buffer. The first
+ parameter is the index into log_buf, the second is optional and
+ specified the previous log buffer's flags, used for properly
+ formatting continued lines.
+end
- while ($i < logged_chars)
- set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1)
+define dmesg
+ set $i = log_first_idx
+ set $end_idx = log_first_idx
+ set $prev_flags = 0
- if ($idx + 100 <= $end_idx) || \
- ($end_idx <= $idx && $idx + 100 < log_buf_len)
- printf "%.100s", &log_buf[$idx]
- set $i = $i + 100
+ while (1)
+ set $msg = ((struct printk_log *) (log_buf + $i))
+ if ($msg->len == 0)
+ set $i = 0
else
- printf "%c", log_buf[$idx]
- set $i = $i + 1
+ dump_log_idx $i $prev_flags
+ set $i = $i + $msg->len
+ set $prev_flags = $msg->flags
+ end
+ if ($i == $end_idx)
+ loop_break
end
end
end
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index d406d98339b2..44f5e6bccd97 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -74,8 +74,8 @@ blink_set() function (see <linux/leds.h>). To set an LED to blinking,
however, it is better to use the API function led_blink_set(), as it
will check and implement software fallback if necessary.
-To turn off blinking again, use the API function led_brightness_set()
-as that will not just set the LED brightness but also stop any software
+To turn off blinking, use the API function led_brightness_set()
+with brightness value LED_OFF, which should stop any software
timers that may have been required for blinking.
The blink_set() function should choose a user friendly blinking value
diff --git a/Documentation/media/kapi/v4l2-controls.rst b/Documentation/media/kapi/v4l2-controls.rst
index 8ff9ee806042..916fd4366cdf 100644
--- a/Documentation/media/kapi/v4l2-controls.rst
+++ b/Documentation/media/kapi/v4l2-controls.rst
@@ -107,23 +107,6 @@ Those are now no longer needed.
Where foo->sd is of type struct v4l2_subdev.
-And set all core control ops in your struct v4l2_subdev_core_ops to these
-helpers:
-
-.. code-block:: none
-
- .queryctrl = v4l2_subdev_queryctrl,
- .querymenu = v4l2_subdev_querymenu,
- .g_ctrl = v4l2_subdev_g_ctrl,
- .s_ctrl = v4l2_subdev_s_ctrl,
- .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
- .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
- .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-
-Note: this is a temporary solution only. Once all V4L2 drivers that depend
-on subdev drivers are converted to the control framework these helpers will
-no longer be needed.
-
1.4) Clean up the handler at the end:
.. code-block:: none
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 631b0f7ae16f..9d05ed7f7da5 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -369,8 +369,6 @@ does not allocate any driver private context space.
Switch configuration
--------------------
-- priv_size: additional size needed by the switch driver for its private context
-
- tag_protocol: this is to indicate what kind of tagging protocol is supported,
should be a valid value from the dsa_tag_protocol enum
@@ -416,11 +414,6 @@ PHY devices and link management
to the switch port MDIO registers. If unavailable return a negative error
code.
-- poll_link: Function invoked by DSA to query the link state of the switch
- builtin Ethernet PHYs, per port. This function is responsible for calling
- netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
- single call. Executes from workqueue context.
-
- adjust_link: Function invoked by the PHY library when a slave network device
is attached to a PHY device. This function is responsible for appropriately
configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
Bridge VLAN filtering
---------------------
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+ configured for turning on or off VLAN filtering. If nothing specific needs to
+ be done at the hardware level, this callback does not need to be implemented.
+ When VLAN filtering is turned on, the hardware must be programmed with
+ rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+ VLAN ID map/rules. If there is no PVID programmed into the switch port,
+ untagged frames must be rejected as well. When turned off the switch must
+ accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+ allowed.
+
- port_vlan_prepare: bridge layer function invoked when the bridge prepares the
configuration of a VLAN on the given port. If the operation is not supported
by the hardware, this function should return -EOPNOTSUPP to inform the bridge
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 6c7f365b1515..9ae929395b24 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN
shared_media - BOOLEAN
Send(router) or accept(host) RFC1620 shared media redirects.
- Overrides ip_secure_redirects.
+ Overrides secure_redirects.
shared_media for the interface will be enabled if at least one of
conf/{all,interface}/shared_media is set to TRUE,
it will be disabled otherwise
default TRUE
secure_redirects - BOOLEAN
- Accept ICMP redirect messages only for gateways,
- listed in default gateway list.
+ Accept ICMP redirect messages only to gateways listed in the
+ interface's current gateway list. Even if disabled, RFC1122 redirect
+ rules still apply.
+ Overridden by shared_media.
secure_redirects for the interface will be enabled if at least one of
conf/{all,interface}/secure_redirects is set to TRUE,
it will be disabled otherwise
diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt
index 8638f61c8c9d..37eca00796ee 100644
--- a/Documentation/scsi/scsi_eh.txt
+++ b/Documentation/scsi/scsi_eh.txt
@@ -263,19 +263,23 @@ scmd->allowed.
3. scmd recovered
ACTION: scsi_eh_finish_cmd() is invoked to EH-finish scmd
- - shost->host_failed--
- clear scmd->eh_eflags
- scsi_setup_cmd_retry()
- move from local eh_work_q to local eh_done_q
LOCKING: none
+ CONCURRENCY: at most one thread per separate eh_work_q to
+ keep queue manipulation lockless
4. EH completes
ACTION: scsi_eh_flush_done_q() retries scmds or notifies upper
- layer of failure.
+ layer of failure. May be called concurrently but must have
+ a no more than one thread per separate eh_work_q to
+ manipulate the queue locklessly
- scmd is removed from eh_done_q and scmd->eh_entry is cleared
- if retry is necessary, scmd is requeued using
scsi_queue_insert()
- otherwise, scsi_finish_command() is invoked for scmd
+ - zero shost->host_failed
LOCKING: queue or finish function performs appropriate locking
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 20d05719bceb..3849814bfe6d 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -826,7 +826,8 @@ The keyctl syscall functions are:
(*) Compute a Diffie-Hellman shared secret or public key
long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params,
- char *buffer, size_t buflen);
+ char *buffer, size_t buflen,
+ void *reserved);
The params struct contains serial numbers for three keys:
@@ -843,6 +844,8 @@ The keyctl syscall functions are:
public key. If the base is the remote public key, the result is
the shared secret.
+ The reserved argument must be set to NULL.
+
The buffer length must be at least the length of the prime, or zero.
If the buffer length is nonzero, the length of the result is