summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2012-05-14 22:35:04 +0200
committerArnd Bergmann <arnd@arndb.de>2012-05-15 13:44:11 +0200
commitdeb88cc3c69975cbd9875ed9fac259b351f6b64d (patch)
treeece2ffba5c3e585cf649d73e4ea1784037335468 /Documentation
parentecf1b318347f6c250293ee8a9f2597373b00e0c3 (diff)
parent7f217794ffa72f208a250b79ab0b7ea3de19677f (diff)
Merge branch 'drivers/mmc' into next/dt2
Changes in the dt2 branch move stuff around that gets changed in the drivers/mmc branch. I chose a non-obvious resolution by adding the new bus-width property into all the tegra sdhci device nodes. Conflicts: arch/arm/boot/dts/tegra-cardhu.dts arch/arm/boot/dts/tegra-harmony.dts arch/arm/boot/dts/tegra-ventana.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-esdhc.txt6
-rw-r--r--Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt3
-rw-r--r--Documentation/devicetree/bindings/mmc/mmc.txt27
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt4
-rw-r--r--Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt4
6 files changed, 38 insertions, 8 deletions
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index 64bcb8be973c..0d93b4b0e0e3 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -11,9 +11,11 @@ Required properties:
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- sdhci,wp-inverted : (optional) specifies that eSDHC controller
- reports inverted write-protect state;
+ reports inverted write-protect state; New devices should use
+ the generic "wp-inverted" property.
- sdhci,1-bit-only : (optional) specifies that a controller can
- only handle 1-bit data transfers.
+ only handle 1-bit data transfers. New devices should use the
+ generic "bus-width = <1>" property.
- sdhci,auto-cmd12: (optional) specifies that a controller can
only handle auto CMD12.
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index ab22fe6e73ab..c7e404b3ef05 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -9,7 +9,7 @@ Required properties:
- interrupts : Should contain eSDHC interrupt
Optional properties:
-- fsl,card-wired : Indicate the card is wired to host permanently
+- non-removable : Indicate the card is wired to host permanently
- fsl,cd-internal : Indicate to use controller internal card detection
- fsl,wp-internal : Indicate to use controller internal write protection
- cd-gpios : Specify GPIOs for card detection
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
index 89a0084df2f7..d64aea5a4203 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
@@ -10,7 +10,8 @@ Required properties:
Optional properties:
- gpios : may specify GPIOs in this order: Card-Detect GPIO,
- Write-Protect GPIO.
+ Write-Protect GPIO. Note that this does not follow the
+ binding from mmc.txt, for historic reasons.
- interrupts : the interrupt of a card detect interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
new file mode 100644
index 000000000000..6e70dcde0a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -0,0 +1,27 @@
+These properties are common to multiple MMC host controllers. Any host
+that requires the respective functionality should implement them using
+these definitions.
+
+Required properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>
+
+Optional properties:
+- cd-gpios : Specify GPIOs for card detection, see gpio binding
+- wp-gpios : Specify GPIOs for write protection, see gpio binding
+- cd-inverted: when present, polarity on the wp gpio line is inverted
+- wp-inverted: when present, polarity on the wp gpio line is inverted
+- non-removable: non-removable slot (like eMMC)
+- max-frequency: maximum operating clock frequency
+
+Example:
+
+sdhci@ab000000 {
+ compatible = "sdhci";
+ reg = <0xab000000 0x200>;
+ interrupts = <23>;
+ bus-width = <4>;
+ cd-gpios = <&gpio 69 0>;
+ cd-inverted;
+ wp-gpios = <&gpio 70 0>;
+ max-frequency = <50000000>;
+}
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
index 7e51154679a6..f77c3031607f 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
@@ -7,12 +7,12 @@ Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
- reg : Should contain SD/MMC registers location and length
- interrupts : Should contain SD/MMC interrupt
+- bus-width : Number of data lines, can be <1>, <4>, or <8>
Optional properties:
- cd-gpios : Specify GPIOs for card detection
- wp-gpios : Specify GPIOs for write protection
- power-gpios : Specify GPIOs for power control
-- support-8bit : Boolean, indicates if 8-bit mode should be used.
Example:
@@ -23,5 +23,5 @@ sdhci@c8000200 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
- support-8bit;
+ bus-width = <8>;
};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index dbd4368ab8cc..8a53958c9a9f 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -15,7 +15,7 @@ Optional properties:
ti,dual-volt: boolean, supports dual voltage cards
<supply-name>-supply: phandle to the regulator device tree node
"supply-name" examples are "vmmc", "vmmc_aux" etc
-ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+bus-width: Number of data lines, default assumed is 1 if the property is missing.
cd-gpios: GPIOs for card detection
wp-gpios: GPIOs for write protection
ti,non-removable: non-removable slot (like eMMC)
@@ -27,7 +27,7 @@ Example:
reg = <0x4809c000 0x400>;
ti,hwmods = "mmc1";
ti,dual-volt;
- ti,bus-width = <4>;
+ bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
};