Merge tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC cleanups from Olof Johansson:
 "Cleanups for 3.16.  Among these are:

   - a bunch of misc cleanups for Broadcom platforms, mostly
     housekeeping
   - enabling Common Clock Framework on the older s3c24xx Samsung
     chipsets
   - cleanup of the Versatile Express system controller code, moving it
     to syscon
   - power management cleanups for OMAP platforms

  plus a handful of other cleanups across the place"

* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
  clk: samsung: fix build error
  ARM: vexpress: refine dependencies for new code
  clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
  ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
  ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
  ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
  ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
  ARM: OMAP2+: PRCM: cleanup some header includes
  ...

5 files changed, 232 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 5580e9c4bd85..00318d083c9e 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -8,6 +8,8 @@ interrupt generation, MMC and NOR Flash control etc.
 Required node properties:
 - compatible value : = "arm,vexpress,sysreg";
 - reg : physical base address and the size of the registers window
+
+Deprecated properties, replaced by GPIO subnodes (see below):
 - gpio-controller : specifies that the node is a GPIO controller
 - #gpio-cells : size of the GPIO specifier, should be 2:
   - first cell is the pseudo-GPIO line number:
@@ -16,35 +18,86 @@ Required node properties:
     2 - NOR FLASH WPn
   - second cell can take standard GPIO flags (currently ignored).
 
+Control registers providing pseudo-GPIO lines must be represented
+by subnodes, each of them requiring the following properties:
+- compatible value : one of
+			"arm,vexpress-sysreg,sys_led"
+			"arm,vexpress-sysreg,sys_mci"
+			"arm,vexpress-sysreg,sys_flash"
+- gpio-controller : makes the node a GPIO controller
+- #gpio-cells : size of the GPIO specifier, must be 2:
+  - first cell is the function number:
+    - for sys_led : 0..7 = LED 0..7
+    - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+    - for sys_flash : 0 = NOR FLASH WPn
+  - second cell can take standard GPIO flags (currently ignored).
+
 Example:
 	v2m_sysreg: sysreg@10000000 {
  		compatible = "arm,vexpress-sysreg";
  		reg = <0x10000000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
+
+		v2m_led_gpios: sys_led@08 {
+			compatible = "arm,vexpress-sysreg,sys_led";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		v2m_mmc_gpios: sys_mci@48 {
+			compatible = "arm,vexpress-sysreg,sys_mci";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		v2m_flash_gpios: sys_flash@4c {
+			compatible = "arm,vexpress-sysreg,sys_flash";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
  	};
 
 This block also can also act a bridge to the platform's configuration
 bus via "system control" interface, addressing devices with site number,
 position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details.
-
-The node describing a config device must refer to the sysreg node via
-"arm,vexpress,config-bridge" phandle (can be also defined in the node's
-parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must also define the following
-property:
-- arm,vexpress-sysreg,func : must contain two cells:
-  - first cell defines function number (eg. 1 for clock generator,
-    2 for voltage regulators etc.)
-  - device number (eg. osc 0, osc 1 etc.)
+numbers - see motherboard's TRM for more details. All configuration
+controller accessible via this interface must reference the sysreg
+node via "arm,vexpress,config-bridge" phandle and define appropriate
+topology properties - see main vexpress node documentation for more
+details. Each child of such node describes one function and must
+define the following properties:
+- compatible value : must be one of (corresponding to the TRM):
+	"arm,vexpress-amp"
+	"arm,vexpress-dvimode"
+	"arm,vexpress-energy"
+	"arm,vexpress-muxfpga"
+	"arm,vexpress-osc"
+	"arm,vexpress-power"
+	"arm,vexpress-reboot"
+	"arm,vexpress-reset"
+	"arm,vexpress-scc"
+	"arm,vexpress-shutdown"
+	"arm,vexpress-temp"
+	"arm,vexpress-volt"
+- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
+  - first cell of each group defines the function number
+    (eg. 1 for clock generator, 2 for voltage regulators etc.)
+  - second cell of each group defines device number (eg. osc 0,
+    osc 1 etc.)
+  - some functions (eg. energy meter, with its 64 bit long counter)
+    are using more than one function/device number pair
 
 Example:
 	mcc {
+		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
 		osc@0 {
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
 		};
+
+		energy@0 {
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+		};
 	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
index ae49161e478a..39844cd0bcce 100644
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress.txt
@@ -80,12 +80,17 @@ but also control clock generators, voltage regulators, gather
 environmental data like temperature, power consumption etc. Even
 the video output switch (FPGA) is controlled that way.
 
-Nodes describing devices controlled by this infrastructure should
-point at the bridge device node:
+The controllers are not mapped into normal memory address space
+and must be accessed through bridges - other devices capable
+of generating transactions on the configuration bus.
+
+The nodes describing configuration controllers must define
+the following properties:
+- compatible value:
+	compatible = "arm,vexpress,config-bus";
 - bridge phandle:
 	arm,vexpress,config-bridge = <phandle>;
-This property can be also defined in a parent node (eg. for a DCC)
-and is effective for all children.
+and children describing available functions.
 
 
 Platform topology
@@ -197,7 +202,7 @@ Example of a VE tile description (simplified)
 	};
 
 	dcc {
-		compatible = "simple-bus";
+		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
 		osc@0 {
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
new file mode 100644
index 000000000000..0b64ad8dadf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -0,0 +1,50 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2410-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
new file mode 100644
index 000000000000..2b430960ba47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
@@ -0,0 +1,50 @@
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2412-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2412-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+			 <&clocks SCLK_UART>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
new file mode 100644
index 000000000000..e67bb05478af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
@@ -0,0 +1,56 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};