Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk framework updates from Stephen Boyd:
 "The core clk framework changes are small again. They're mostly minor
  fixes that weren't causing enough problems (or any problems when we're
  just clarifying things) to warrant sending outside the merge window.
  The majority of changes are in drivers for various SoCs. Full details
  are in the logs, but here's the summary.

  Core:

   - Better support for DeviceTree overlays with the addition of the
     CLK_OF_DECLARE_DRIVER macro. Now we won't probe a clk driver for a
     device node that matched during of_clk_init(), unless the driver
     uses CLK_OF_DECLARE_DRIVER instead of CLK_OF_DECLARE. This allows
     overlays to work cleanly for drivers that must probe before the
     device model is ready, and also after it's ready when an overlay is
     loaded.

   - Clarification in the code around how clk_hw pointers are returned
     from of clk providers

   - Proper migration of prepare/enable counts to parents when the clk
     tree is constructed

  New Drivers:

   - Socionext's UniPhier SoCs
   - Loongson1C
   - ZTE ZX296718
   - Qualcomm MDM9615
   - Amlogic GXBB AO clocks and resets
   - Broadcom BCM53573 ILP
   - Maxim MAX77620

 Updates:

   - Four Allwinner SoCs are migrated to the new style clk driver (A31,
     A31s, A23 and A33)
   - Exynos 5xxx audio and DRAM clks
   - Loongson1B AC97, DMA and NAND clks
   - Rockchip DDR clks and rk3399 driver tweaks
   - Renesas R-Car M3-W (r8a7796) SoC SDHI interface and Watchdog timer
     clks
   - Renasas R-Car H3 and M3-W CMT clks and RAVB+Thermal clks for M3-W
   - Amlogic GXBB MMC gate clks
   - at91 sama5d4 sckc
   - Removal of STiH415 and STiH416 clk support as the SoC is being
     removed
   - Rework of STiH4xx clk support for new style bindings
   - Continuation of driver migration to clk_hw based registration APIs
   - xgene PMD support
   - bcm2835 critical clk markings
   - ARM versatile ICST"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (199 commits)
  CLK: Add Loongson1C clock support
  clk: Loongson1: Make use of GENMASK
  clk: Loongson1: Update clocks of Loongson1B
  clk: Loongson1: Refactor Loongson1 clock
  clk: change the type of clk_hw_onecell_data.num to unsigned int
  clk: zx296718: register driver earlier with core_initcall
  clk: mvebu: dynamically allocate resources in Armada CP110 system controller
  clk: mvebu: fix setting unwanted flags in CP110 gate clock
  clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomap
  clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap
  clk: sunxi-ng: Fix reset offset for the A23 and A33
  clk: at91: sckc: optimize boot time
  clk: at91: Add sama5d4 sckc support
  clk: at91: move slow clock controller clocks to sckc.c
  clk: imx6: initialize GPU clocks
  clk: imx6: fix i.MX6DL clock tree to reflect reality
  clk: imx53: Add clocks configuration
  clk: uniphier: add clock data for UniPhier SoCs
  clk: uniphier: add core support code for UniPhier clock driver
  clk: bcm: Add driver for BCM53573 ILP clock
  ...

36 files changed, 673 insertions, 332 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index 936166fbee09..cb0054ac7121 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -5,7 +5,8 @@ The Mediatek apmixedsys controller provides the PLLs to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8173-apmixedsys"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
new file mode 100644
index 000000000000..4137196dd686
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
@@ -0,0 +1,22 @@
+Mediatek bdpsys controller
+============================
+
+The Mediatek bdpsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-bdpsys", "syscon"
+- #clock-cells: Must be 1
+
+The bdpsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+bdpsys: clock-controller@1c000000 {
+	compatible = "mediatek,mt2701-bdpsys", "syscon";
+	reg = <0 0x1c000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
new file mode 100644
index 000000000000..768f3a5bc055
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -0,0 +1,22 @@
+Mediatek ethsys controller
+============================
+
+The Mediatek ethsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-ethsys", "syscon"
+- #clock-cells: Must be 1
+
+The ethsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ethsys: clock-controller@1b000000 {
+	compatible = "mediatek,mt2701-ethsys", "syscon";
+	reg = <0 0x1b000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
new file mode 100644
index 000000000000..beed7b594cea
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
@@ -0,0 +1,24 @@
+Mediatek hifsys controller
+============================
+
+The Mediatek hifsys controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-hifsys", "syscon"
+- #clock-cells: Must be 1
+
+The hifsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+hifsys: clock-controller@1a000000 {
+	compatible = "mediatek,mt2701-hifsys", "syscon";
+	reg = <0 0x1a000000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
index b1f2ce17dff8..f6a916686f4c 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -5,7 +5,8 @@ The Mediatek imgsys controller provides various clocks to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index aaf8d1460c4d..1620ec2a5a3f 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -6,7 +6,8 @@ outputs to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
index 4385946eadef..67dd2e473d25 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -5,7 +5,8 @@ The Mediatek mmsys controller provides various clocks to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt8173-mmsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
index 2f6ff86df49f..e494366782aa 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -6,7 +6,8 @@ outputs to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt8135-pericfg", "syscon"
 	- "mediatek,mt8173-pericfg", "syscon"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
index f9e917994ced..9f2fe7860114 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -5,7 +5,8 @@ The Mediatek topckgen controller provides various clocks to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-topckgen"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8173-topckgen"
 - #clock-cells: Must be 1
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
index 1faacf1c1b25..2440f73450c3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -5,7 +5,8 @@ The Mediatek vdecsys controller provides various clocks to the system.
 
 Required Properties:
 
-- compatible: Should be:
+- compatible: Should be one of:
+	- "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
new file mode 100644
index 000000000000..a55d31b48d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -0,0 +1,45 @@
+* Amlogic GXBB AO Clock and Reset Unit
+
+The Amlogic GXBB AO clock controller generates and supplies clock to various
+controllers within the Always-On part of the SoC.
+
+Required Properties:
+
+- compatible: should be "amlogic,gxbb-aoclkc"
+- reg: physical base address of the clock controller and length of memory
+       mapped region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+- #reset-cells: should be 1.
+
+Each reset is assigned an identifier and client nodes can use this identifier
+to specify the reset which they consume. All available resets are defined as
+preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
+used in device tree sources.
+
+Example: AO Clock controller node:
+
+	clkc_AO: clock-controller@040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock and reset generated
+  by the clock controller:
+
+	uart_AO: serial@4c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0x4c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc_AO CLKID_AO_UART1>;
+		resets = <&clkc_AO RESET_AO_UART1>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
index 8b7177cecb36..27468119fd94 100644
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -5,20 +5,50 @@ Technology (IDT). ARM integrated these oscillators deeply into their
 reference designs by adding special control registers that manage such
 oscillators to their system controllers.
 
-The ARM system controller contains logic to serialize and initialize
+The various ARM system controllers contain logic to serialize and initialize
 an ICST clock request after a write to the 32 bit register at an offset
 into the system controller. Furthermore, to even be able to alter one of
 these frequencies, the system controller must first be unlocked by
 writing a special token to another offset in the system controller.
 
+Some ARM hardware contain special versions of the serial interface that only
+connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
+different values and sometimes also hardwire the output divider. They
+therefore have special compatible strings as per this table (the OD value is
+the value on the pins, not the resulting output divider):
+
+Hardware variant:        RDW     OD          VDW
+
+Integrator/AP            22      1           Bit 8 0, rest variable
+integratorap-cm
+
+Integrator/AP            46      3           Bit 8 0, rest variable
+integratorap-sys
+
+Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+integratorap-pci         14      1           14
+
+Integrator/CP            22      variable    Bit 8 0, rest variable
+integratorcp-cm-core
+
+Integrator/CP            22      variable    Bit 8 0, rest variable
+integratorcp-cm-mem
+
 The ICST oscillator must be provided inside a system controller node.
 
 Required properties:
+- compatible: must be one of
+  "arm,syscon-icst525"
+  "arm,syscon-icst307"
+  "arm,syscon-icst525-integratorap-cm"
+  "arm,syscon-icst525-integratorap-sys"
+  "arm,syscon-icst525-integratorap-pci"
+  "arm,syscon-icst525-integratorcp-cm-core"
+  "arm,syscon-icst525-integratorcp-cm-mem"
 - lock-offset: the offset address into the system controller where the
   unlocking register is located
 - vco-offset: the offset address into the system controller where the
   ICST control register is located (even 32 bit address)
-- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
 - #clock-cells: must be <0>
 - clocks: parent clock, since the ICST needs a parent clock to derive its
   frequency from, this attribute is compulsory.
diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
new file mode 100644
index 000000000000..1e3370ba189f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
@@ -0,0 +1,70 @@
+* Peripheral Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide peripheral clocks which are
+used as clock source for the peripheral of the SoC.
+
+There are two different blocks associated to north bridge and south
+bridge.
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs for Armada 370 North bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	mmc		MMC controller
+1	sata_host	Sata Host
+2	sec_at		Security AT
+3	sac_dap		Security DAP
+4	tsecm		Security Engine
+5	setm_tmx	Serial Embedded Trace Module
+6	avs		Adaptive Voltage Scaling
+7	sqf		SPI
+8	pwm		PWM
+9	i2c_2		I2C 2
+10	i2c_1		I2C 1
+11	ddr_phy		DDR PHY
+12	ddr_fclk	DDR F clock
+13	trace		Trace
+14	counter		Counter
+15	eip97		EIP 97
+16	cpu		CPU
+
+The following is a list of provided IDs for Armada 370 South bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	gbe-50		50 MHz parent clock for Gigabit Ethernet
+1	gbe-core	parent clock for Gigabit Ethernet core
+2	gbe-125		125 MHz parent clock for Gigabit Ethernet
+3	gbe1-50		50 MHz clock for Gigabit Ethernet port 1
+4	gbe0-50		50 MHz clock for Gigabit Ethernet port 0
+5	gbe1-125	125 MHz clock for Gigabit Ethernet port 1
+6	gbe0-125	125 MHz clock for Gigabit Ethernet port 0
+7	gbe1-core	Gigabit Ethernet core port 1
+8	gbe0-core	Gigabit Ethernet core port 0
+9	gbe-bm		Gigabit Ethernet Buffer Manager
+10	sdio		SDIO
+11	usb32-sub2-sys	USB 2 clock
+12	usb32-ss-sys	USB 3 clock
+
+Required properties:
+
+- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
+  north bridge block, or
+  "marvell,armada-3700-periph-clock-sb" for the south bridge block
+- reg : must be the register address of North/South Bridge Clock register
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks : list of the parent clock phandle in the following order:
+  TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
+
+
+Example:
+
+nb_perih_clk: nb-periph-clk@13000{
+	compatible = "marvell,armada-3700-periph-clock-nb";
+	reg = <0x13000 0x1000>;
+	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+	<&tbg 3>, <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
new file mode 100644
index 000000000000..0ba1d83ff363
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
@@ -0,0 +1,27 @@
+* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provde Time Base Generator clocks which are
+used as parent clocks for the peripheral clocks.
+
+The TBG clock consumer should specify the desired clock by having the
+clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 3700:
+ 0 = TBG A P
+ 1 = TBG B P
+ 2 = TBG A S
+ 3 = TBG B S
+
+Required properties:
+- compatible : shall be "marvell,armada-3700-tbg-clock"
+- reg : must be the register address of North Bridge PLL register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Example:
+
+tbg: tbg@13200 {
+	compatible = "marvell,armada-3700-tbg-clock";
+	reg = <0x13200 0x1000>;
+	clocks = <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
new file mode 100644
index 000000000000..a88f1f05fbd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
@@ -0,0 +1,28 @@
+* Xtal Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
+reading the gpio latch register.
+
+This node must be a subnode of the node exposing the register address
+of the GPIO block where the gpio latch is located.
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-3700-xtal-clock"
+- #clock-cells : from common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("xtal")
+
+Example:
+gpio1: gpio@13800 {
+	compatible = "marvell,armada-3700-gpio", "syscon", "simple-mfd";
+	reg = <0x13800 0x1000>;
+
+	xtalclk: xtal-clk {
+		compatible = "marvell,armada-3700-xtal-clock";
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 181bc8ac4e3a..5f3ad65daf69 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -6,7 +6,8 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be one of the following:
-	"atmel,at91sam9x5-sckc":
+	"atmel,at91sam9x5-sckc" or
+	"atmel,sama5d4-sckc":
 		at91 SCKC (Slow Clock Controller)
 		This node contains the slow clock definitions.
 
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
new file mode 100644
index 000000000000..2ebb107331dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
@@ -0,0 +1,36 @@
+Broadcom BCM53573 ILP clock
+===========================
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+This binding is used for ILP clock (sometimes referred as "slow clock")
+on Broadcom BCM53573 devices using Cortex-A7 CPU.
+
+ILP's rate has to be calculated on runtime and it depends on ALP clock
+which has to be referenced.
+
+This clock is part of PMU (Power Management Unit), a Broadcom's device
+handing power-related aspects. Its node must be sub-node of the PMU
+device.
+
+Required properties:
+- compatible: "brcm,bcm53573-ilp"
+- clocks: has to reference an ALP clock
+- #clock-cells: should be <0>
+- clock-output-names: from common clock bindings, should contain clock
+		      name
+
+Example:
+
+pmu@18012000 {
+	compatible = "simple-mfd", "syscon";
+	reg = <0x18012000 0x00001000>;
+
+	ilp {
+		compatible = "brcm,bcm53573-ilp";
+		clocks = <&alp>;
+		#clock-cells = <0>;
+		clock-output-names = "ilp";
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
index 180e8835569e..0c3d6015868d 100644
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -10,6 +10,8 @@ Required Properties:
   - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
   - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
     SoCs.
+  - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
+    SoCs.
   - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
     SoCs.
 - reg: physical base address and length of the controller's register set.
@@ -91,5 +93,5 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_MOUT_AUDSS>,
 		<&clock_audss EXYNOS_MOUT_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
-	"mout_audss", "mout_i2s";
+		      "mout_audss", "mout_i2s";
 };
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
index aeab635b07b5..4527de3ea205 100644
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
@@ -12,24 +12,29 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
+- clocks: should contain an entry specifying the root clock from external
+  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+  defined using standard clock bindings with "fin_pll" clock-output-name.
+  That clock is being passed internally to the 9 PLLs.
+
 All available clocks are defined as preprocessor macros in
 dt-bindings/clock/exynos5410.h header and can be used in device
 tree sources.
 
-External clock:
-
-There is clock that is generated outside the SoC. It
-is expected that it is defined using standard clock bindings
-with following clock-output-name:
-
- - "fin_pll" - PLL input clock from XXTI
-
 Example 1: An example of a clock controller node is listed below.
 
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
 	clock: clock-controller@0x10010000 {
 		compatible = "samsung,exynos5410-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
+		clocks = <&fin_pll>;
 	};
 
 Example 2: UART controller node that consumes the clock generated by the clock
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 9c40739a661a..8398a3a5e106 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -1,10 +1,24 @@
-Binding for Maxim MAX77686 32k clock generator block
+Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
 
-This is a part of device tree bindings of MAX77686 multi-function device.
-More information can be found in bindings/mfd/max77686.txt file.
+This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
+multi-function device. More information can be found in MFD DT binding
+doc as follows:
+	bindings/mfd/max77686.txt for MAX77686 and
+	bindings/mfd/max77802.txt for MAX77802 and
+	bindings/mfd/max77620.txt for MAX77620.
 
 The MAX77686 contains three 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C.
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77686.h.
+
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77802.h.
+
+The MAX77686 contains one 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77620.h.
 
 Following properties should be presend in main device node of the MFD chip.
 
@@ -17,30 +31,84 @@ Optional properties:
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. Following indices are allowed:
-    - 0: 32khz_ap clock,
-    - 1: 32khz_cp clock,
-    - 2: 32khz_pmic clock.
+    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
+    - 1: 32khz_cp clock (max77686, max77802),
+    - 2: 32khz_pmic clock (max77686).
+
+Clocks are defined as preprocessor macros in above dt-binding header for
+respective chips.
+
+Example:
+
+1. With MAX77686:
+
+#include <dt-bindings/clock/maxim,max77686.h>
+/* ... */
+
+	Node of the MFD chip
+		max77686: max77686@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 0>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77686 MAX77686_CLK_PMIC>;
+		};
+
+2. With MAX77802:
+
+#include <dt-bindings/clock/maxim,max77802.h>
+/* ... */
+
+	Node of the MFD chip
+		max77802: max77802@09 {
+			compatible = "maxim,max77802";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 0>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77802 MAX77802_CLK_32K_AP>;
+		};
 
-Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
-header and can be used in device tree sources.
 
-Example: Node of the MFD chip
+3. With MAX77620:
 
-	max77686: max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-		#clock-cells = <1>;
+#include <dt-bindings/clock/maxim,max77620.h>
+/* ... */
 
-		/* ... */
-	};
+	Node of the MFD chip
+		max77620: max77620@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			#clock-cells = <1>;
+			/* ... */
+		};
 
-Example: Clock consumer node
+	Clock consumer node
 
-	foo@0 {
-		compatible = "bar,foo";
-		/* ... */
-		clock-names = "my-clock";
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-	};
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
+		};
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
deleted file mode 100644
index c6dc7835f06c..000000000000
--- a/Documentation/devicetree/bindings/clock/maxim,max77802.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Binding for Maxim MAX77802 32k clock generator block
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 contains two 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Required properties:
-- #clock-cells: From common clock binding; shall be set to 1.
-
-Optional properties:
-- clock-output-names: From common clock binding.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
-     - 0: 32khz_ap clock,
-     - 1: 32khz_cp clock.
-
-Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
-header and can be used in device tree sources.
-
-Example: Node of the MFD chip
-
-	max77802: max77802@09 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		/* ... */
-	};
-
-Example: Clock consumer node
-
-	foo@0 {
-		compatible = "bar,foo";
-		/* ... */
-		clock-names = "my-clock";
-		clocks = <&max77802 MAX77802_CLK_32K_AP>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 660e64912cce..cb8542d910b3 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -86,6 +86,8 @@ ID	Clock		Peripheral
 7	pex3		PCIe 3
 8	pex0		PCIe 0
 9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+15	sata0		SATA 0
 17	sdio		SDIO
 22	xor0		XOR 0
 28	xor1		XOR 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 9a60fde32b02..869a2f0e2ff6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -15,6 +15,7 @@ Required properties :
 			"qcom,gcc-msm8974pro"
 			"qcom,gcc-msm8974pro-ac"
 			"qcom,gcc-msm8996"
+			"qcom,gcc-mdm9615"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
index dd755be63a01..a3c78aa88038 100644
--- a/Documentation/devicetree/bindings/clock/qcom,lcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
@@ -7,6 +7,7 @@ Required properties :
 			"qcom,lcc-msm8960"
 			"qcom,lcc-apq8064"
 			"qcom,lcc-ipq8064"
+			"qcom,lcc-mdm9615"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
deleted file mode 100644
index 6247652044a0..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for a ST divider and multiplexer clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-divmux-c65-hs",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c65-ls",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf0",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf1",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf2",	"st,clkgena-divmux"
-	"st,clkgena-divmux-c32-odf3",	"st,clkgena-divmux"
-
-- #clock-cells : From common clock binding; shall be set to 1.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a1_div1: clk-m-a1-div1 {
-			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c32-odf1",
-				     "st,clkgena-divmux";
-
-			clocks = <&clk_m_a1_osc_prediv>,
-				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-			clock-output-names = "clk-m-rx-icn-ts",
-					     "clk-m-rx-icn-vdp-0",
-					     "", /* unused */
-					     "clk-m-prv-t1-bus",
-					     "clk-m-icn-reg-12",
-					     "clk-m-icn-reg-10",
-					     "", /* unused */
-					     "clk-m-icn-st231";
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
index f1fa91c68768..9a46cb1d7a04 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -10,14 +10,7 @@ This binding uses the common clock binding[1].
 Required properties:
 
 - compatible : shall be:
-	"st,stih416-clkgenc-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-fvdp",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hva", 	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-hd",	"st,clkgen-mux"
-	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
-	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
-	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
+	"st,stih407-clkgen-a9-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
@@ -27,10 +20,13 @@ Required properties:
 
 Example:
 
-	clk_m_hva: clk-m-hva@fd690868 {
+	clk_m_a9: clk-m-a9@92b0000 {
 		#clock-cells = <0>;
-		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-		reg = <0xfd690868 4>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
 
-		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
index 844b3a0976bf..f207053e0550 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -9,24 +9,10 @@ Base address is located to the parent node. See clock binding[2]
 Required properties:
 
 - compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-	"st,clkgena-plls-c65"
-	"st,plls-c32-a1x-0",		"st,clkgen-plls-c32"
-	"st,plls-c32-a1x-1",		"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
-	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
-	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
-	"sst,plls-c32-cx_0",		"st,clkgen-plls-c32"
-	"sst,plls-c32-cx_1",		"st,clkgen-plls-c32"
-	"st,stih418-plls-c28-a9",	"st,clkgen-plls-c32"
-
-	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
-	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
+	"st,clkgen-pll0"
+	"st,clkgen-pll1"
+	"st,stih407-clkgen-plla9"
+	"st,stih418-clkgen-plla9"
 
 - #clock-cells : From common clock binding; shall be set to 1.
 
@@ -36,17 +22,16 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-		reg = <0xfee62000 0xb48>;
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
 
-		clk_s_a0_pll: clk-s-a0-pll {
+		clockgen_a9_pll: clockgen-a9-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
+			compatible = "st,stih407-clkgen-plla9";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
+			clock-output-names = "clockgen-a9-pll-odf";
 		};
 	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
deleted file mode 100644
index 604766c2619e..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Binding for a ST pre-divider clock driver.
-
-This binding uses the common clock binding[1].
-Base address is located to the parent node. See clock binding[2]
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
-	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
-
-- #clock-cells : From common clock binding; shall be set to 0.
-
-- clocks : From common clock binding
-
-- clock-output-names : From common clock binding.
-
-Example:
-
-	clockgen-a@fd345000 {
-		reg = <0xfd345000 0xb50>;
-
-		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c32",
-				     "st,clkgena-prediv";
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-m-a2-osc-prediv";
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
deleted file mode 100644
index 109b3eddcb17..000000000000
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Binding for a type of STMicroelectronics clock crossbar (VCC).
-
-The crossbar can take up to 4 input clocks and control up to 16
-output clocks. Not all inputs or outputs have to be in use in a
-particular instantiation. Each output can be individually enabled,
-select any of the input clocks and apply a divide (by 1,2,4 or 8) to
-that selected clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-
-- compatible : shall be:
-	"st,stih416-clkgenc",		"st,vcc"
-	"st,stih416-clkgenf",		"st,vcc"
-
-- #clock-cells : from common clock binding; shall be set to 1.
-
-- reg : A Base address and length of the register set.
-
-- clocks : from common clock binding
-
-- clock-output-names : From common clock binding. The block has 16
-                       clock outputs but not all of them in a specific instance
-                       have to be used in the SoC. If a clock name is left as
-                       an empty string then no clock will be created for the
-                       output associated with that string index. If fewer than
-                       16 strings are provided then no clocks will be created
-                       for the remaining outputs.
-
-Example:
-
-	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
-		#clock-cells = <1>;
-		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-		reg = <0xfe8308ac 12>;
-
-		clocks = <&clk_s_vcc_hd>,
-			 <&clockgen_c 1>,
-			 <&clk_s_tmds_fromphy>,
-			 <&clockgen_c 2>;
-
-		clock-output-names  = "clk-s-pix-hdmi",
-				      "clk-s-pix-dvo",
-				      "clk-s-out-dvo",
-				      "clk-s-pix-hd",
-				      "clk-s-hddac",
-				      "clk-s-denc",
-				      "clk-s-sddac",
-				      "clk-s-pix-main",
-				      "clk-s-pix-aux",
-				      "clk-s-stfe-frc-0",
-				      "clk-s-ref-mcru",
-				      "clk-s-slave-mcru",
-				      "clk-s-tmds-hdmi",
-				      "clk-s-hdmi-reject-pll",
-				      "clk-s-thsens";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index b18bf86f926f..c35390f60545 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -13,14 +13,6 @@ address is common of all subnode.
 			...
 		};
 
-		prediv_node {
-			...
-		};
-
-		divmux_node {
-			...
-		};
-
 		quadfs_node {
 			...
 		};
@@ -29,10 +21,6 @@ address is common of all subnode.
 			...
 		};
 
-		vcc_node {
-			...
-		};
-
 		flexgen_node {
 			...
 		};
@@ -43,11 +31,8 @@ This binding uses the common clock binding[1].
 Each subnode should use the binding described in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
 [3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
 [4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
-[6] Documentation/devicetree/bindings/clock/st,vcc.txt
 [7] Documentation/devicetree/bindings/clock/st,quadfs.txt
 [8] Documentation/devicetree/bindings/clock/st,flexgen.txt
 
@@ -57,44 +42,27 @@ Required properties:
 
 Example:
 
-	clockgen-a@fee62000 {
-
-		reg = <0xfee62000 0xb48>;
+	clockgen-a@090ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
 
 		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
-			compatible = "st,clkgena-plls-c65";
-
-			clocks = <&clk-sysin>;
-
-			clock-output-names = "clk-s-a0-pll0-hs",
-					     "clk-s-a0-pll0-ls",
-					     "clk-s-a0-pll1";
-		};
-
-		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-			#clock-cells = <0>;
-			compatible = "st,clkgena-prediv-c65",
-				     "st,clkgena-prediv";
+			compatible = "st,clkgen-pll0";
 
 			clocks = <&clk_sysin>;
 
-			clock-output-names = "clk-s-a0-osc-prediv";
+			clock-output-names = "clk-s-a0-pll-ofd-0";
 		};
 
-		clk_s_a0_hs: clk-s-a0-hs {
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
 			#clock-cells = <1>;
-			compatible = "st,clkgena-divmux-c65-hs",
-				     "st,clkgena-divmux";
 
-			clocks = <&clk-s_a0_osc_prediv>,
-				 <&clk-s_a0_pll 0>, /* pll0 hs */
-				 <&clk-s_a0_pll 2>; /* pll1 */
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
 
-			clock-output-names = "clk-s-fdma-0",
-					     "clk-s-fdma-1",
-					     ""; /* clk-s-jit-sense */
-					     /* fourth output unused */
+			clock-output-names = "clk-ic-lmi0";
 		};
 	};
-
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index b7ee5c7e0f75..7ff77fc57dff 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -60,6 +60,10 @@ This binding uses the common clock binding[2].
 Required properties:
 - compatible : shall be:
   "st,flexgen"
+  "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+  audio use case)
+  "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+					and activate synchronous mode)
 
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
index cedeb9cc8208..d93d49342e60 100644
--- a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -11,12 +11,8 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be:
-  "st,stih416-quadfs216",	"st,quadfs"
-  "st,stih416-quadfs432",	"st,quadfs"
-  "st,stih416-quadfs660-E",	"st,quadfs"
-  "st,stih416-quadfs660-F",	"st,quadfs"
-  "st,stih407-quadfs660-C",	"st,quadfs"
-  "st,stih407-quadfs660-D",	"st,quadfs"
+  "st,quadfs"
+  "st,quadfs-pll"
 
 
 - #clock-cells : from common clock binding; shall be set to 1.
@@ -35,14 +31,15 @@ Required properties:
 
 Example:
 
-	clockgen_e: clockgen-e@fd3208bc {
-                #clock-cells = <1>;
-                compatible = "st,stih416-quadfs660-E", "st,quadfs";
-                reg = <0xfd3208bc 0xB0>;
-
-                clocks = <&clk_sysin>;
-                clock-output-names = "clk-m-pix-mdtp-0",
-				     "clk-m-pix-mdtp-1",
-				     "clk-m-pix-mdtp-2",
-				     "clk-m-mpelpc";
-        };
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,quadfs-pll";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index cb91507ffb1e..3868458a5feb 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -2,7 +2,10 @@ Allwinner Clock Control Unit Binding
 ------------------------------------
 
 Required properties :
-- compatible: must contain one of the following compatible:
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun8i-a23-ccu"
+		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-h3-ccu"
 
 - reg: Must contain the registers base address and length
diff --git a/Documentation/devicetree/bindings/clock/uniphier-clock.txt b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
new file mode 100644
index 000000000000..c7179d3b5c33
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/uniphier-clock.txt
@@ -0,0 +1,134 @@
+UniPhier clock controller
+
+
+System clock
+------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-clock" - for sLD3 SoC.
+    "socionext,uniphier-ld4-clock"  - for LD4 SoC.
+    "socionext,uniphier-pro4-clock" - for Pro4 SoC.
+    "socionext,uniphier-sld8-clock" - for sLD8 SoC.
+    "socionext,uniphier-pro5-clock" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-clock" - for LD11 SoC.
+    "socionext,uniphier-ld20-clock" - for LD20 SoC.
+- #clock-cells: should be 1.
+
+Example:
+
+	sysctrl@61840000 {
+		compatible = "socionext,uniphier-sysctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x61840000 0x4000>;
+
+		clock {
+			compatible = "socionext,uniphier-ld20-clock";
+			#clock-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+Provided clocks:
+
+ 8: ST DMAC
+12: GIO (Giga bit stream I/O)
+14: USB3 ch0 host
+15: USB3 ch1 host
+16: USB3 ch0 PHY0
+17: USB3 ch0 PHY1
+20: USB3 ch1 PHY0
+21: USB3 ch1 PHY1
+
+
+Media I/O (MIO) clock
+---------------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-mio-clock" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
+    "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
+    "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+- #clock-cells: should be 1.
+
+Example:
+
+	mioctrl@59810000 {
+		compatible = "socionext,uniphier-mioctrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59810000 0x800>;
+
+		clock {
+			compatible = "socionext,uniphier-ld20-mio-clock";
+			#clock-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+Provided clocks:
+
+ 0: SD ch0 host
+ 1: eMMC host
+ 2: SD ch1 host
+ 7: MIO DMAC
+ 8: USB2 ch0 host
+ 9: USB2 ch1 host
+10: USB2 ch2 host
+11: USB2 ch3 host
+12: USB2 ch0 PHY
+13: USB2 ch1 PHY
+14: USB2 ch2 PHY
+15: USB2 ch3 PHY
+
+
+Peripheral clock
+----------------
+
+Required properties:
+- compatible: should be one of the following:
+    "socionext,uniphier-sld3-peri-clock" - for sLD3 SoC.
+    "socionext,uniphier-ld4-peri-clock"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-clock" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-clock" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-clock" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-clock" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-clock" - for LD20 SoC.
+- #clock-cells: should be 1.
+
+Example:
+
+	perictrl@59820000 {
+		compatible = "socionext,uniphier-perictrl",
+			     "simple-mfd", "syscon";
+		reg = <0x59820000 0x200>;
+
+		clock {
+			compatible = "socionext,uniphier-ld20-peri-clock";
+			#clock-cells = <1>;
+		};
+
+		other nodes ...
+	};
+
+Provided clocks:
+
+ 0: UART ch0
+ 1: UART ch1
+ 2: UART ch2
+ 3: UART ch3
+ 4: I2C ch0
+ 5: I2C ch1
+ 6: I2C ch2
+ 7: I2C ch3
+ 8: I2C ch4
+ 9: I2C ch5
+10: I2C ch6
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
index 82f9638121db..8233e771711b 100644
--- a/Documentation/devicetree/bindings/clock/xgene.txt
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible : shall be one of the following:
 	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
 	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
 	"apm,xgene-device-clock" - for a X-Gene device clock
 	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
 	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
@@ -22,6 +23,15 @@ Required properties for SoC or PCP PLL clocks:
 Optional properties for PLL clocks:
 - clock-names : shall be the name of the PLL. If missing, use the device name.
 
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
 Required properties for device clocks:
 - reg : shall be a list of address and length pairs describing the CSR
          reset and/or the divider. Either may be omitted, but at least
@@ -59,6 +69,14 @@ For example:
 		type = <0>;
 	};
 
+	pmd0clk: pmd0clk@7e200200 {
+		compatible = "apm,xgene-pmd-clock";
+		#clock-cells = <1>;
+		clocks = <&pmdpll 0>;
+		reg = <0x0 0x7e200200 0x0 0x10>;
+		clock-output-names = "pmd0clk";
+	};
+
 	socpll: socpll@17000120 {
 		compatible = "apm,xgene-socpll-clock";
 		#clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
new file mode 100644
index 000000000000..8c18b7b237bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt
@@ -0,0 +1,35 @@
+Device Tree Clock bindings for ZTE zx296718
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"zte,zx296718-topcrm":
+		zx296718 top clock selection, divider and gating
+
+	"zte,zx296718-lsp0crm" and
+	"zte,zx296718-lsp1crm":
+		zx296718 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296718-clock.h
+for the full list of zx296718 clock IDs.
+
+
+topclk: topcrm@1461000 {
+        compatible = "zte,zx296718-topcrm-clk";
+        reg = <0x01461000 0x1000>;
+        #clock-cells = <1>;
+};
+
+usbphy0:usb-phy0 {
+	compatible = "zte,zx296718-usb-phy";
+	#phy-cells = <0>;
+	clocks = <&topclk USB20_PHY_CLK>;
+	clock-names = "phyclk";
+	status = "okay";
+};