diff options
author | Arnd Bergmann <arnd@arndb.de> | 2021-01-18 14:06:09 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2021-01-20 10:24:19 +0100 |
commit | 89d4f98ae90d95716009bb89823118a8cfbb94dd (patch) | |
tree | fa53307722aa9a89f2c40ffe6e282b1b6c73e788 /Documentation | |
parent | f3a732843accb04ede91055ffd0b92464fa4d15c (diff) |
ARM: remove zte zx platform
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.
However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.
Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.
Thanks to Jun and Shawn for maintaining this platform over the past
five years.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'Documentation')
5 files changed, 0 insertions, 99 deletions
diff --git a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt b/Documentation/devicetree/bindings/arm/zte,sysctrl.txt deleted file mode 100644 index 7e66b7f7ba96..000000000000 --- a/Documentation/devicetree/bindings/arm/zte,sysctrl.txt +++ /dev/null @@ -1,30 +0,0 @@ -ZTE sysctrl Registers - -Registers for 'zte,zx296702' SoC: - -System management required properties: - - compatible = "zte,sysctrl" - -Low power management required properties: - - compatible = "zte,zx296702-pcu" - -Bus matrix required properties: - - compatible = "zte,zx-bus-matrix" - - -Registers for 'zte,zx296718' SoC: - -System management required properties: - - compatible = "zte,zx296718-aon-sysctrl" - - compatible = "zte,zx296718-sysctrl" - -Example: -aon_sysctrl: aon-sysctrl@116000 { - compatible = "zte,zx296718-aon-sysctrl", "syscon"; - reg = <0x116000 0x1000>; -}; - -sysctrl: sysctrl@1463000 { - compatible = "zte,zx296718-sysctrl", "syscon"; - reg = <0x1463000 0x1000>; -}; diff --git a/Documentation/devicetree/bindings/arm/zte.yaml b/Documentation/devicetree/bindings/arm/zte.yaml deleted file mode 100644 index 672f8129cd31..000000000000 --- a/Documentation/devicetree/bindings/arm/zte.yaml +++ /dev/null @@ -1,28 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/zte.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: ZTE platforms device tree bindings - -maintainers: - - Jun Nie <jun.nie@linaro.org> - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - enum: - - zte,zx296702-ad1 - - const: zte,zx296702 - - items: - - enum: - - zte,zx296718-evb - - const: zte,zx296718 - -additionalProperties: true - -... diff --git a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt b/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt deleted file mode 100644 index b015508f9780..000000000000 --- a/Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt +++ /dev/null @@ -1,20 +0,0 @@ -ZTE zx2967 SoCs Reset Controller -======================================= - -Please also refer to reset.txt in this directory for common reset -controller binding usage. - -Required properties: -- compatible: should be one of the following. - * zte,zx296718-reset -- reg: physical base address of the controller and length of memory mapped - region. -- #reset-cells: must be 1. - -example: - - reset: reset-controller@1461060 { - compatible = "zte,zx296718-reset"; - reg = <0x01461060 0x8>; - #reset-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index c23c93b400f0..1a51c532e8d2 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -19,7 +19,6 @@ select: contains: enum: - arm,pl011 - - zte,zx296702-uart required: - compatible @@ -30,7 +29,6 @@ properties: - const: arm,pl011 - const: arm,primecell - items: - - const: zte,zx296702-uart - const: arm,primecell reg: diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt deleted file mode 100644 index 7629de1c2c72..000000000000 --- a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt +++ /dev/null @@ -1,19 +0,0 @@ -* ZTE zx2967 family Power Domains - -zx2967 family includes support for multiple power domains which are used -to gate power to one or more peripherals on the processor. - -Required Properties: - - compatible: should be one of the following. - * zte,zx296718-pcu - for zx296718 power domain. - - reg: physical base address of the controller and length of memory mapped - region. - - #power-domain-cells: Must be 1. - -Example: - - pcu_domain: pcu@117000 { - compatible = "zte,zx296718-pcu"; - reg = <0x00117000 0x1000>; - #power-domain-cells = <1>; - }; |